Create Release strategy for PR
Dear experts,
We have one class FRG_EBAN for PR release strategy and there are 5 characteristics in that class. Now i need to create a rel. strategy with 4 characteristics . Can i create a new class for PR release strategy?
Please help.
Thank you
King regards,
Zusen
Thank you SAM for your reply.
In the existing class FRG_EBAN one of characteristics is Account Assignment Category. If i am not wrong which cannt be blank. and i have seen that all characteristics included in the class needs to be maintained in the release strategy.
I need to create a release strategy of PR in which no a/c assignment category will be maintained. but in existing scenario i cannt create release strategy without giving value in a/c assignment category characteristic in the characteristic tab of release strategy.
Please suggest how to resolve this problem
Kind regards,
Zusen
Similar Messages
-
Release Strategy for Contract is not getting picked whereas it is ok for PO
Dear Experts,
I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
Kindly resolve the issue.
SatishS0004830404 wrote:
Dear Experts,
>
> I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
> I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
>
> Kindly resolve the issue.
>
> Satish
hi,
use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
Thanking you -
Release strategy for PO, RFQ & Contract
Hi,
We have created release strategy for PO, RFQ & Contract.
Characterisitc is created for Target Value for Header Area (CEKKO-KTWRT)
for RFQ & Contract it working fine but for PO not triggering.
what can be the cause.
Pls guide.Hi,
Melih is right, for POs you can not use the target value.
What you might do is to include the document type and CEKKO-GNETW as additional characteristics and then set for contract document types the GNETW blank, and for PO documet type the target value blank. Blank means any value should fit.
I hope this hint helps!
Best Regards,
Arminda Jack -
Release strategy for Return PO
Hi,
Can we create Release strategy for Return PO's. ?
Regards
SunilHi,
The process for return PO is:
Process:
- Create a return PO
- Create a outbound delivery
- Goods issue
Release Strategy can be created for All Document Types as Document Types being one of the determining factors for Release strategies. So under Classification data Characteristics which we maintain determine the release strategies for a Particular Purchasing documents. Actually it depends on your Business case that for what all documents you want to have a release strategy config.
regards,
Prashant Rathore. -
Release strategy for Future validity period- (Outline agreements)
Dear All,
I want to create release strategy for Scheduling agreement.But I am creating the SA for furure validity period.In this case how the release strategy will triger.
E.g Today 09.03.09 I create a Sceduling agreement and the validity period I maintain is from 01.06.09 to 31.12.09 and Amount say 100 Rs.
I am using Characteristics Doct type and Amount.. The system checks the rate as on date (i.e on 09.03.09) and since it doesnt find any value the Release strategy is not trigeering.
How to set up release strategy in the above case.
Thanks in Advance.
Regards
AmarHi Amar,
1) if you maintain a target value (EKKO-KTWRT) in the header of the
contract this value is the basis for the determination of the release
strategy. If the target value is 0, the system will cumulate the
values of the items and will use this value for the determination.
2) So if the target value is 0 and you change the price of a condition
with a validity period in the future the system will react in the
following way:
Example:
the contract contains one item with quantity = 100 and a net price
of EUR 5,-.
all contracts with a target value from EUR 0 - 1.000,- should be
subject of a release strategy
the contract is created and released on October the 1st
ME32K -> October the 2nd you define a new price of EUR 7,- with a
validity period from 03.10.09 - 30-10.09 -> you save the contract
-> the release strategy is not reset, as the start date is not
reached yet (system date < startdate of validity period)
ME32K October the 3rd you change a field in the contract -> the
release strategy is reset
This is system design that a release strategy can only be reset through
an action by the user. The determination of the release strategy can't
be triggered automatically in the background.
If you create a document which is subject of an overall release strategy
(e.g. p.o., contract) the determination of the release strategy takes
place when the user hits the 'save' button or chooses the 'check'
function.
So there must be a kind of event that tells the system that something
has changed.
Regards,
Edit -
No release strategy for service PO
Purchasing document xxxxxxx cannot be released
Message no. MEPO823
I created release strategy for service entry sheet through following process.
1. Created three characterstics(service_val, serv_plant & ZSER_DOC TYPE) and assigned it to class 032 (gave it name service entry sheet) Communication structure CESSR and fields WERKS etc...
2. Than maintained all the config setting for service entry sheet through External service management..Maintained release groups, release codes, release strategy and r and maintained all the values .
3.I made a service PO with doc type FO
Now i dont get a tab of release on the service PO tab and get the above error.
Just let me know step by step how to config release strategy for service entry sheet.Do we need to maintain all above entries...?
For PO we have release strategy maintained for all document types and i am able to release the PO.
Regards,
ShailendraKeep the release strategy at Plant level only....All the purchasing docs will get blocked
-
Hi Sap gurus
I have created release strategy for PR & PO in development server.
How do i create the same release strategy in quality & production .whether i have to create transport request from dev. or i have to create in quality & production?If i try to create a new strategy it will be in non editable mode.& shows client is not modifiable.
plz helpHi,
If you are talking about release strategy and release group it is transportable.
Release class and Release characterstics are not transportable.
You have to configure release class and characterstics in the target server individually.
One thing more you have to give the characterstics value in each server after all the above steps.
Regards
Ankur -
Release strategy for auto created PO's
Hi Guys,
I have a requirement to implement release strategy for automatically created PO's.
PR's are created automatically and we have a program which create PO's automatically.
we would want to release them before generating output to vendor.
could anyone please have any inputs here.
regards
mittuHi!
You may use your existing release strategy or create a new one (depending on your requirement). You just have to add/ use the document type you used for your auto-generated POs.
Hope this helps! =) -
Release strategy for PREQs created from PM work order
Hi All,
I have an issue with determining release strategy for purchase requisition for external services created via PM work order (iw31 transaction).
We have activated release strategy for Purchase requisition based on the following characteristics:
CEBAN_PLANT
CEBAN_COST_CENTER_GROUP
CEBAN_MANUAL
Characteristic CEBAN_COST_CENTER_GROUP is defined via user exit based on the cost center used in the PREQ and a z table which contains all cost centers mapped to the corresponding cost center goups.
In the user exit we have consider to cases:
The first one is when a purchase requisition is created with account assignment K (cost center) then system is checking the z table and determines the right cost center group.
The second case is when a purchase requisition is created with account assignment F (internal order) then based on the order type and number the cost center in the order is defined and based on it the corresponding entry in the z table cost center group is assigned.
The third case is when purchase requisition for services is created automatically from PM work order. In this case the PREQ is again with account assignment F, but at the time when user exit is checking the input parameters the real number of the work order does not exist and system can not defined the other parameters.
We have defined for this requisitions in the release strategy for characteristic CEBAN_MANUAL creation indicator " F".
Has anybody of you defined release strategy for PREQs created out of work order before. How did you manage to trigger the release strategy?
Best Regards,
DesislavaHi,
For PM order find the costcenter in the settlement rule of the order or else find the costcenter in the Location tab of the order.
Consider this filed from order & write in the Z program to pick up the costcenter from there to find out the cost center group.
Regards,
Raj -
Release Strategy for reservation created from PM and PS
Dear All,
How to configure the release strategy for reservation generated from PM and PS.
Regards,
Atanudo you talk about release strategie for requisitions, or really reservations?
-
Release strategy for Schedule lines in SD
Hello All
Can we create a release strategy for Schedule Lines in Scheduling Agreement? If Yes How?
I have already maintained a release strategy for Item Level... which I want to put it for Schedule line as well....
Thanks in advance.Hello,
I think you are in the wrong forum. Please choose the right forum category and post it there.
Matthias -
Release strategy for Scheduling Agreement(SA)
Dear Forum,
This issue is with regards to the release strategy for Scheduling Agreement(SA)
Until now release has only been applicable to contracts at our client site. But we now plan to introduce it for SA as well. Such a feature is available in SAP but the problem is that with the given release strategy GR is not allowed until the release is affected. The system allows you to post the delivery schedule.
Now what I want is that after making the SA the system should not allow to make delivery schedule if release is not affected.
We also have MRP run at client site..Kindly suggest the procedure as, how to configure it.Are der any User Exit for the same,if so please discuss..
Warm Regards
Nainesh
SAP ECC 6.0Hi,
What's the SA Type that was created via MRP.
If it's LP (without release document), release will not do anything BUT
If it's LPA (release document), then you will not be able to Post the GR until release is affected.
Thanks.
Scheduling Agreement can be categories as
1) LP (without release document) and
2) LPA (with release document)
If use LP, you can do GR without release but with LPA, you need to release the schedule line via ME38.
Thanks.
NanoSAP
Posts: 58
Registered: 1/5/09
Forum Points: 6
Re: release strategy for Scheduling Agreement(SA)
Posted: Jun 26, 2009 8:32 AM in response to: sathish.kumar Reply
Dear Mr.Satish,
Thanks a lot for your earliest reply...But my point is i want the system should not allow to make delivery schedule if release is not affected...Though schedule lines are generating through MRP run...Is is possible,by any chance...?? -
How to setup a release strategy for store generated purchase order
Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2teaPlease go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok -
Purchase Order not subject to release strategy for contract rel. strategy
Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract. -
Release strategy for Release POs
Hi Every one,
We have a requirement.
A contract is created and approved as per the regular strategy.
The releases (POs) are created against it and sent directly to the vendor.
As the Contract is already approved, standard SAP does not apply the release strategy for the POs created for the contract.
But the business wants the PO releases too to follow the release strategy.
Can you please look in to this and let me what changes we need to make this happen.
Regards
PavanAs the Contract is already approved, standard SAP does not apply the release strategy for the POs created for the contract
This statement is not correct, it's upto you to use or Not to use Release Process for release Orders (PO) created w.r.to Contract.
As the table & fields are Common for both Contract & PO release ..you need to choose the PO relevant fields & values in the Release Strategy..
So that the Release Process is applicable to PO's created w.r.to Contract also..
For ex: if you use the field purchase Doc category as a Character in the Release , it differentiates whether it is PO or Contract..
So that you can define different Release Strategy for PO & Contract
Or if you maintain the Doc type of PO in the Contract Release Strategy in CL20N / CL24N trxn code..
then the release strategy applies to PO also..
Maybe you are looking for
-
I owned an iPhone 4s a year ago before I unfortunately lost it. I have since then bought the iPhone 5 but had not plugged it in to my computer yet to download any music. I plugged in my iPhone today to my laptop and my iTunes store stated that it reg
-
By Java how to delete some lines in a text file containg some character?
Hello All, I am having a text file [Basically It is a Sql File]. its containing some commented lines. All i need to do is, By using a java Method I have to delete All the commented lines in That file ..... For Example if My file is like following. /*
-
Hello , I have a requirement to display Multiple heading in ALV Grid, I am using the Class 'cl_gui_alv_grid'. please let me know if you have Any suggestions. Ex: | Divison | Sub D:1 Sub D: 2 Sub D: 3 Like
-
What do I need to build a minimal Cisco videoconferencing system?
I'm trying to figure out what I need to build a videoconferencing system. I already have: Main site with a Cisco 3825 w/ Adv IP 12.4, where I expect I'll have 5 - 10 users who will regularly use a videoconferencing system Remote site with a Cisco 281
-
GAP inbetween songs- how do I remove it?
I have a few CDs (all uploaded to iTunes) that are mixed so that the songs cross-fade into each other, one track carries over into the next etc. iTunes puts a small gap inbetween songs, which is a problem because it sounds like the song stutters when