Create Report group by
i have created a report and it is working fine but i need a simple modification there.
my report is group left report and
select bu,empcode,empname from afpftran
here is the query.and "bu" is the group field.i want set idividual "bu" to be seen in different page.no two different bu can not be in the same page.so wat i have to do for that.
Regards sourav
Hello
in the single bu group ,there can be more than one empcode,empname.and we can not tell howmany empcode,empname can be there in one group.so how can i be set max record property to one
so plz guide me
Regards sourav
Similar Messages
-
How to create Report group in GR55
Hi gurus,
I have to create new report group for special purpose ledger for getting report in GR55 please assist me how to create the new report group?
Initiatives are highly appreciated and rewards with points.
Regards
ChandraHi,
Use trns code GR55 then go to menu "Report group" there u can find create ,change and display options.
Regards,
Krishna -
Hi. I'd like to ask how to create / edit a Report Group? I'd like to create one, put 2 reports there and write transaction which will launch that report group. I'd be thankful for help or links Greetings. P.
Hi,
To Create a Report Group, In SAP Menu Follow the below link.
Information system ® Tools ® Report Painter ® Report Writer ® Report group ® Display/Change/Create/Delete
To create a Transaction Code for a Report Painter/report writer report
Tcode for Report Painter
To create a TCode, follow the steps below.
1) Go to Transaction code SE93, Enter TCode Name and Press Create.
2) Give short Description and select Parameter Transaction, Press Enter
3) Select Transation Radio Button and write START_REPORT in the next text
box Also Check the box Skip Initial Screen.
4) On the bottom of Screen (default Values), Enter Parameters
i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say 1SIP)
5) Save and Execute.
Regards,
Lijo Joseph -
Getting error while creating report group using T code GR52
HI All,
Below error is coming while generating report group in T code GR52
"Set 01010002SSS6EL0001 does not contain any entries "
Thanks in Advance......Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil -
How to create a Group Above report using APEX
I want to create a Group above report with more that one group using APEX. Is it possible to generate such a report using APEX. If so kindly let me know how to go about creating a Group above report with more than one group.
Hello Srini,
Thank you very much for the reply but I'm not into OBIEE... I want the required query to be processed and the output to be shown in xml layout to load into RTF document. The rest I can manage.. but please let me know how to get the .xml output with out using the report builder or the apps environment(concurrent prg submission)..
Please let me know if any... urgent
Thanks in advance
Krishna -
PDF's I'm creating with Group 4 data report Insufficient Data for Image
I am maintaining a software application, which creates PDF files from JPEG and TIFF (with Group 4 compression) image files, which typically come from scanners. It has performed well for many years, but as of the release of Adobe Reader X, we are seeing "Insufficient Data for Image" on some images.
I've read reports of this message on these forums, and I've tried shrinking the image, adjusting zoom, and upgrading to Adobe Reader XI -- none of these have worked.
Our software creates these PDF files by wrapping the raw image data in an XObject, which looks like this:
24 0 obj
<< /Type /XObject
/Subtype /Image
/Name /Im1
/Filter /CCITTFaxDecode
/Width 1704
/Height 2200
/BitsPerComponent 1
/ColorSpace /DeviceGray
/DecodeParms <</K -1 /Columns 1704 /Rows 2200 >>
/Length 25 0 R >>
stream
<<BINARY DATA>>
endstream
endobj
25 0 obj
31512
endobj
Wherein, the <<BINARY DATA>> are 31,512 bytes of raw image data -- the same data which would appear in a Group 4 compressed TIFF file.
Indeed, when we do create a Group 4 TIFF file with the same binary data, it opens successfully in all common viewers.
Any assistance, such as the precise meaning of this error message, could be helpful.Just a note that the bug appears to relate to JPXDecode, so far as all previous reports seem to suggest (no inside information). JPXDecode supports multiple image resolutions in the same image, so messing with zoom sometimes helps. If you can post a complete file somewhere it might interest someone who could analyse it.
The message simply means that decompressing the filters does not yield enough bytes. This may either reflect that there really isn't enough data, or it could indicate any kind of data error (which causes the filter to silently return EOF). -
How to create new TC which will call report group "MGRO"?
Hi Abap-Experts,
I want to create new transaction code which should call report Group MGRO. After executing the new transaction, the first screen of the user should be the selection screen of report group "MGRO" to run the report group.
Can anyone please guide me by giving some example for this?The query was resolved
-
Helpdesk Report Group Users - Cannot create a connection to data source 'DataSource1'
Getting the following error for a User accessing the report who is a member of the reporting group. If I add them as a sysadmin in SQL they can get access. What permissions need changing for this user group?
Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for userDave,
For a complete understanding of the permission and groups, I would rather suggest you to do the installation of the MBAM components in a single server infrastructure in a test environment.
Create the following domain security groups and use it during the configuration of the MBAM roles:-
1) MBAM Advanced Helpdesk Users
2) MBAM Helpdesk Users
3) MBAM Report Users
4) MBAM Read and Write Access
5) MBAM Read Only Access.
Create an application pool account and create a login in SQL for it. Use it only during:-
1) Configuration of "Compliance and Audit Database connection"
2) Configuration for All Web Applications.
If your application pool account is not a domain administrator, the run the following powershell command to set the service principal name :-
Setspn
-s http//<FQDN of MBAM Web Server> domain\<Application pool account>
Make sure the application pool account must be trusted for delegation.
That's all you need to do. Then after the installation you can check the properties of each group in SQL to verify the rights and permission assigned during the installation.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps ======= -
Hi experts how to create a z t.code for a report in a report group
Hi Experts,
I have to create a new z t.code a report which is in a report group and i have to add that t.code in a custom menu.
how to do it?
Thanks in Advance.
Regards,
HituHi Hitu,
Go to SE93 and input your tcode and selection the option 'Transaction with parameters'.
And in Default values, you have to give values like 'Report Name ' etc. I am not sure exactly what values but you have to make entries here.
Shylesh -
Creating server group for scheduling Webi report
Hi All,
I have 33 scheduled reports running in my BO 4.1 environment.
I want to split this in 3 groups and create server group to run specific job.
To achieve this what should I have to do ?
In group one what server and services should be there to run my schedule successfully ?
I thought of cloning server but my research says it is not good practice. Can someone please guide me with this ?Please share the details regarding web intelligence report based on BW data or based on Universe (RDBMS) because in both the case Adaptive Processing Server configuration is change.
For BW Data Source below is the details regarding Adpative processing Server:
<Node_Name>_SIA.APSCORE
Services:
Auditing Service, Platform Search Service, Security Token Service, TraceLog Service, Translation Service
<Node_Name>_SIA.APSFEDERATION
Services:
Auditing Service, Data Federation Service, TraceLog Service
<Node_Name>_SIA.APSLCM
Services:
Auditing Service, Lifecycle Management ClearCase Service, Lifecycle Management Service, TraceLog Service, Visual Difference Service
<Node_Name>_SIA.APSMonitoring
Services:
Auditing Service, Monitoring Service, TraceLog Service
<Node_Name>_SIA.APSPublishing
Services:
Auditing Service, Publishing Post Processing Service, Publishing Service, TraceLog Service
<Node_Name>_SIA.APSWebi
Services:
Auditing Service, DSL Bridge Service, Rebean Service, TraceLog Service, Visualization Service, Web Intelligence Monitoring Service
<Node_Name>_SIA.BexWebApplication
Services:
Auditing Service, BEx Web Applications Service, TraceLog Service
<Node_Name>_SIA.MDAS
Services:
Auditing Service, Multi Dimensional Analysis Service, TraceLog Service
For Job Server:
Adaptive Job Server:
<Node_Name>_SIA.AJSWebi
Services: Web Intelligence
Add all above services in Server Group and assign to web intelligence report based on BW Data and check the status.
Thanks,
Daya -
Create User Groups and assign Access privileges in Reports
Hi All,
Could you share the document or explain which explains about the Standard method to create User Groups in CMC for BOBJ XI 3.1 architecture.
And how to assign privileges to user groups like view reports, folders, privileges to create/edit reports etc.
Environment:
- Backend - BW
- and BO XI 3.1 sp3
Thanks,
AKBO XI 3.1 Administration guide
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_admin_en.pdf -
Error in generating a report group in Report Painter
Hi,
I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
Thanks,
LouieThere's no error when I generate the same report in a new created group as well as when I generate the existting report group without the new created report.
Information on where terminated
The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
in "FILL_RANGES_FROM_SET".
The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
The termination occurred in line 92457 of the source code of the (Include)
program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
the editor 924570).
Louie -
Report Group in Report Painter
In my <b>report group</b> there are many reports .
Now i need to give a transaction code to my <b>report group</b>.
Then which report will execute by the transaction codeHi
To create a Transaction Code for a Report Painter/report writer report
Tcode for Report Painter
To create a TCode, follow the steps below.
1) Go to Transaction code SE93, Enter TCode Name and Press Create.
2) Give short Description and select Parameter Transaction, Press Enter
3) Select Transation Radio Button and write START_REPORT in the next text
box Also Check the box Skip Initial Screen.
4) On the bottom of Screen (default Values), Enter Parameters
i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say 1SIP)
5) Save and Execute.
<b>Reward points for useful Answers</b>
Regards
Anji -
Performance in the Server with the created report - Crystal Report 2008
Hi
We have developed a complex report and deployed in the server. It takes more time to process and once if the report created and we are trying to expand a group/navigate different pages, the same time delay is happeneing. Sometimes it takes more than a minute which really kills the performance. My client has accepted the delay while the report is being genrated but they raise question like why it takes too much time just to display the created report.
I tried keeping the created report in Session and rebind on page_load as well stored a copy on the server and rebind whenver postback happens. Both methods working simliar and no improvement the in the performance. Is there any way to kill the time delay in this.( we have an idea like , if we store the created report at client machine and whenever postback happens just bind from client machine instead to hit the server back, Is this achievable)
Any Help would helpful to me
ThanksHi
What version of CR are you using?
Crystal report 2008, I think its in subject of this thread itself. (Version 12.0.0.683)
What if any CR SP have you applied?
No
What version of .NET are you using?
.Net 3.5 using C# technology (.Net framework 3.5)
What database are you using?
SQL Server2008
What connection type are you using?
We have created a Stored Procedure and connected the SP to the crystal report.
What are you comparing the performance to? E.g.; is it faster somewhere else? How much faster?
No, we didnt compare anywhere. but my question is to avoid the delay in navigation of pages or selecting an item in the group tree. The report contains 100+ pages and client is accepting delay while creating the report but not during navigation or selection( why do the already created report takes more time(even in minutes) to render on navigation or selection and how to avoid the delay))
Define "complex report ".
Nothing complexity in the report even we have used oly less formulas(less than 5) but chats are included and used for each group( we have 6 groups in the report)
Thanks -
Hi,
We have a report group 1AIP, the report generated using this report query has variant in the test system but the same is not there in the validation system(next to the test system).
When investigated the report inside the report group is same 1AIP-001, but the way it is generated in the test system is through GR33 whereas in validation system is GRR3. Can some one tell why the variants are missing! and why the reports inside the report group is different?
Note: The description of report group between the Test and validation is different.It is not possible to add aggregated calculated fileds like count, countdistinct in a bar chart view's calculation tab. I don't know how you did it. Can you give the next step that you did after choosing Group by as type.
Anyway, I tried the same thing with updating ordered list and found that for the third calculation (Count(number)/CountDistinct(user)), the result is 1 and 3 (it should have been 1.5), so there is certainly some problem.
Once you give me the steps on how you created Count, CountDistinct calculated fields and added those in the bar chart, and after I can reproduce, we can file a bug/SR.
Thanks,
Vishal
BAM Dev
Maybe you are looking for
-
Mapping - Split string separated by value ;
Hi, I have a mapping where 4 source values makes the key for 1 target value. In the target string (result after value mapping) i want to get the last value in the string "TargetValue1. <i>SourceValue1;SourceValue2;SourceValue3;SourceValue4;TargetValu
-
hi ... i have downloaded the j2ee 1.5 from sun web site , but i am unable to compile a servelet programe but there is a error can not find package javax.servelet ..and i already have configured class path for jdk and other tool like javac, javap etc
-
Excisable and Non Excisable plants for the same customer and same material
Hi All, We have a customer who purchases the SAME goods from two different plants, one plant is Excisable and another plant is Non Excisable. So sales area of the customer is same for both the plants. When customer buys from Excisable plant Excise Du
-
I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook
-
IPhoto 2 on iOS7 always crashes
Hi there I just downloaded iPhoto 2 on my iPhone 5S with iOS 7.0.4. The problem is: iPhone always crashes after starting it up, while it tries to load the photos, probably from camera roll. I have de-installed and re-installed iPhoto, restartet my iP