Create RFC connection in RSA1 for BW from client 302 to ECC 101 and 151

Hi Friends,
I have to create rfc connection in BI.
I have one client in BI ie302 and two cliwnt in Dev ie101 and 151.
Now I have one connection which is working fine ie 302 to 101.
NO my requirment is to create another connecitons ie 302 to 151.
Kindly sugest if it is feasible and is there any specific settings for the same.
I tried but at a time only one connection is working fine.
Thanls in advance.
regards
Jiggi

Hi,
Can you check if there is any other user ID specified in "BW user for ALE".
To check, Go to transaction RSA1 --> Settings --> Global Settings.
If you find a different user id there, then specify the correct BW user id there.
Please refer to OSS Note 410952 for details.
Hope this solves your problem!!
Regards,
Raj.
Edited by: Raj on Aug 14, 2009 8:15 PM
Edited by: Raj on Aug 14, 2009 8:16 PM

Similar Messages

Error -While create a connection to Microsoft SQL Sever from Oracle SQL Dev

Dear All,
While I am trying to create a connection to Microsoft SQL Sever from Oracle SQL Developer. The following error: "Cannot connect to Microsoft SQL Server on localhost" has been occurred.
Can anyone please guide me to solve this..
Thanks in advance,
Rider

Hi,
Issue not supported in sharepoint on-premise team.
In addition, as this issue is related to Powerview, I suggest you create a new thread on for Powerview forum, more experts will assist you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HT1338 trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

Disable anti virus software and try turning off the Firewall in System Preferences > Security & Privacy > Firewall.
Quit then relaunch the App Store. From the menu bar click Store > Sign In
Then click Store > Check for Unfinished Downloads

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

Requirements for upgradation from 4.7 to ECC 6.0

Hi Guru's,
Can anybody explain what are the steps required for upgradation from 4.7 to ECC 6.0, technically and functionally. If any body have documents regarding the same, please share.Full marks will be awarded.thanx in advance....

Hi
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward points if useful
Regards
Anji

Features and Functionalities of ECC 6.0 for upgrade from 4.7 to ECC 6.0

Hi All,
Can you let me know the features and functionalities of ECC 6.0 as we are planning to go for upgrade from 4.7 to ECC 6.0...
Cheers
Prasanna

And you can see the PAM for your architecture.....
Do you want to use the JAVA instance?
Change from no-unicode to unicode?
Do you have MDMP?
Regards,
Alfredo.

RFC connection error in recording eCATT from Solman

Hello,
I am trying to record eCATT from Solution Manager into our DEV box. I have set-up the RFC connection and tested them.
When trying to recording I got the following message:
"RFC error ThControl: illegal sap_dext call !!!/ connection"
Any suggestion?
Thank you.

Hi
Did you ever find any solution for this, as I am receiving same error even though seems that all settings are in place?
Thanks!

Create a Connection on TREX for 2 systems with same SID

Hello world,
Here is my case,
We have a PRO systems With SID=PRO On Host= production , and a Sandbox system with also SID=PRO On Host=SANDBOX
now i need to create a connection in TREX in parallel so when i add the 2nd one it just edits the 1st one that i have already made
So is it possible to create 2 connection of same SID but diffrent Hosts In parallel?
If Yes how ?
Thanks In Advance...
Ahmed Salam

Hi Ahmed,
it could be possible from the TREX perspective , however such configuration isn't supported . The reason for this is that the SAP applications create indexes using the ABAP system ID and client as a part of the index names (f.e. esh:e10002~e10002~acc_sid~sid). As it's not possible to create an index with the same name 2nd time, you will not be able to use the TREX instance with two systems with same SID.
Best regards,
Mikhail

Unable to create RFC connections

I got a message to update a managed system. I start managed system configuration and select the affected system, configure system step 3 connect managed system. At this point I get an error stating "Error when opening and RFC connection (lb: Hostname or service of the message server unknown" I have tried pinging the system by hostname from the solution manager server and it pings fine. I ran a connection test from the Solution Manager server to the managed system using the one RFC connection available and it connects well also. When I look in the work directory there is an error message repeating the above. Not sure what else I can look at there, I entered the system into the HOSTS file on the solution manager server to see if it made a difference it doesn't. Attached is the entry in the DEV_RFC log from the work directory it won't paste into the question for some reason
Thanks In Advance
Troy
Specifics
Solution Manager 7.1 SP6
Oracle 11.2.0.4
Windows 2008 R2

Hi Troy,
I got a message to update a managed system. I start managed system configuration and select the affected system,
For the affected system i would like to check the SAPOSS connection on the specific system first with OSS1 tranx.Here i suppose on testing SAPOSS connection on the affected system you'll get the error
(lb: Hostname or service of the message server unknown)
Kindly share the OSS1 configurations screenshot( If possible) at affected system and confirm the SAPOSS connectivity on same system.
Regards,
Gaurav

How create a replice "Mass Change for Quotation" from the "Mass..for order"

Hello everybody,
How create a replica "Mass Change for Quotation" UI object from the standard "Mass change for Sales Ordesr" UI object...
Way: SAP CRM==>Select a business role "SPL-Service part Management" ==> Sales ==> "Mass Change Sales Orders"
It needs a replica with the title "Mass Change for Quotation" .
Could you pleas help?
Mit freundlichen Gruessen / Kind regards,
Pavel Biarozkin

Hi Howard Brown,
Thanks for your suggestions about Windows user experience. Actually, we are glad to hear more feedback
about Windows operating system so that we can improve Windows to make it be more easier to
use.
As a suggestion for your current situation, you can use Windows Charm Bar to search Apps, it is also easy to use.
Alex Zhao
TechNet Community Support

Create RFC connection during an Ecatt

hey guys
can anyone send me a document or explain me the steps to create an RFC connection when we create an ECatt in parent and child clients .

Hi Parag,
Creating an RFC connection should be done through SM59.
In SECATT.,
1. Create System Data Container
2 .Give title in the attributes
3. In System Data, name the target system
4. Specify a RFC destination that links or connects to the target system.
Thanks.
Regards,
Muthu Kumaran KG

I want to create a distinct (default) ringtone for calls from people not in my address book?

I want to have one default ringtone for calls from people who are not in my address book. I would also have a distinct ( different) ringtone for those people IN my address book.

Seastar214 wrote:
I want to have one default ringtone for calls from people who are not in my address book. I would also have a distinct ( different) ringtone for those people IN my address book.
Then do that.

Which software to use for email from Sap on the AS/400 and Microsoft Exchan

We want to sent email and attachment from SAP 4.6c - AS/400 and Microsoft Exchange Server.
What's the best way/software to accomplish this.
Any ideas would be appreciated.
Thanks
Joe

Hello Joe,
From Note 455127 and other Notes...
As you are at 4.6C, you have to choose SAPconnect with RFC. And as I remember, SAP Exchange connector is no longer supported in new release of Exchange. So Internet Mail Gateway is probably the best choice...
Please following Note 99965 - basically configure SMTP on i5/OS (AnyMail - free of charge likely), create a file on IFS, etc.
Best regards,
Victor

How to create interactive PDF in Acrobat Pro 11 from Indesign 6 on a Mac and keep all interactivity?

I've seen much discussion on this topic or issue.
I have a 175 page doucment that needs an active TOC, urls that link, buttons that "go back to TOC" on each page and "to next page - to previous page". You can only see the functions properly in Acrobat Reader.
What's up with that? That doesn't work for my deverse client base.
Is it because this was a file originally created in ID 5? I ask because I have since created a new file, exactly the same way with the same interactive attributes as the file that doesn't work and it works fine.
Is my file too many pages for Acrobat to handle?
Please help, my contract depends on this file working.

What you're asking for is perfectly achievable, but it won't work universally. The page count is immaterial.
Table of Contents entries created in InDesign are automatically converted into links when exported to PDF, provided the hyperlinks option on the PDF export dialog has been checked. They should work fine in any desktop software.
Buttons which link to a fixed page and 'next page/previous page' buttons created in InDesign will use a link method that requires JavaScript - this is fully-supported in the Acrobat Family on desktop platforms, but third-party renderers such as Firefox's internal viewer, and mobile PDF apps, have little or no support for scripting.

Can't create JCO connection in Portal7 for ESS1.0

Hi,
I am in the Process of setting up ESS/MSS Rel 1.0 in Portal 7. The Portal is a WebAS ABAP+JAVA system.
First step after installing Portal, I configured the SLD and created the Technical systems. The sld is running and I have tested the sld from the Content Administrator->WebDynpro-> check SLD. It results sld successfully tested and I am able to start the sld also.
After that I deployed the Business packages for ESS/MSS and selfservices via SDM.
Now I am trying to create the JCO connection in the Content Administrator->WebDynpro->create/maintain JCO Connections, it throws the following error
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
    ... 45 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:41:58[UTC], changelist=413534, host=pwdfm101), build date: Fri Aug 31 20:55:03 GMT+08:00 2007
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) Server VM, version:1.4.2_15-b02, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Session & Other
Session Locale en_US
Time of Failure Tue Sep 11 17:54:15 GMT+08:00 2007 (Java Time: 1189504455341)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:236)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
This is very urgent, can any one of u help me on this....
Thanks

Hi,
I am running Netweaver 7 and ERP2005.
J2EE support pack is 9. The sap note that you mentioned is for NW2004 and our system is running on NW2004s.
Now I am trying to reconfigure the sld. In case if you can suggest me another solution, I will be very happy to try that out...
Thanks for your reply
Edited by: Rakesh Bothra on Apr 20, 2011 4:23 AM

Create RFC connection in RSA1 for BW from client 302 to ECC 101 and 151

Similar Messages

Maybe you are looking for