Create RFx Response: An error occurred in the PD Layer transaction terminated
Hello Experts,
Currently we are in SRM 7.02 implemenation: we are facing below problem while creating RFx response with popup screen.
"An error occurred in the PD Layer transaction terminated"
For this we have checked below
1. http://scn.sap.com/thread/1912966 ----> it didn't help
2. We have assigned SAP_ALL role to bidder also ----> Facing same issue
3. Check Number ranges ---> everything is fine.
there is no clue from above points.
Thanks & Regards
Sandeep.
Hello Sandeep,
I am facing the same problem while creating the RFx response in SUS side. Same error occurred while i am creating the Rfx response with bidder.
error: An error occurred in the PD Layer transaction terminated
Could you please let me know, did you find any solution for this issue?
Thanks in advance!!
Thanks,
Anil
Similar Messages
-
An error occurred in the PD layer; transaction terminated in SC
Hi experts,
I have an issue like this "An error occurred in the PD layer; transaction terminated". This error came when i save Shopping Cart.
Just for the information, I have maintained number range assignment for BUS2121 - Shopping Carts also.
And I am working on SRM 7.0
Do you have any idea to solve this issue?
Thanks,
Rhesa SyahrialHi Sam,
Thanks for your fast reply.
Below is the error analysis from st22.
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Buffer table not up-to-date
I have checked in sapnote also about this issue. but still not resolved.
Regards,
Rhesa Syahrial -
A fatal error occured in the PD Layer during create Supplier RFx response
Dear SRM 7 Experts,
I am implementing SRM 7. I can successfully create a Supplier RFx Response on behalf of a supplier using the Surrogate Bid functionality. However, if I log on as a supplier contact person and try to create a Supplier RFx Response, I get error u201D A fatal error occured in the PD Layer. The transaction needs to be terminatedu201D.
Number ranges for Supplier RFx response (BUS2202) are maintained and assigned to the transaction type correctly.
What could be the problem?
Kind regards
PedziHi
Here is the thread which solved the same problem:
Re: A fatal error occured in the PD Layer during RFx response
with regards
Manjunath -
A fatal error occured in the PD Layer during RFx response
Dear Experts,
While creating the RFx response the error is,
"A fatal error occured in the PD Layer. The transaction needs to be terminated."
I just checked the earlier threads discussed on this forum says, this is due to non maintaining of number ranges , but i have maintained the no ranges for RFx response,
got stuck here, kindly help me to solve this issue.
ThanksSorry wrongly posted... the details are below.
The Rfx response no range 01 & 02 are matching with transaction type Supplier quote 01 & 02,
In Define Transaction type -- for Transaction category BUS2200 -- Transaction type RFQU -- the entries are
*Tran.cat Trns.type subsequent obj.type Follow up trns.type
*Bus2200 RFQU BUS2202 ECPO
The entries are correct or not???
Regards
Rakesh -
Fatal error occured in the PD layer srm 7.0
Hi,
While creating the RFx response i am getting following error.
"A fatal error occured in the PD Layer. The transaction needs to be terminated."
I tried as per following thread(number range is correct, i had full authorization), but still i am getting same error.
Any suggestion...Thanks in advance.
A fatal error occured in the PD Layer during RFx response
Thanks,
NarayanHi ,
Tell me the steps what you are performing in creating Rfx .
I am also working in the same scenario in SRM 7.0
This is a generalises error
Regards
G.Ganesh Kumar -
A fatal error occured in the PD Layer. The transaction needs to be terminat
Hi experts,
Do you know these error message?
A fatal error occured in the PD Layer. The transaction needs to be terminated
We applied note 1174283, but it didn't work.
The problem is related to users that don´t belong to SRM structure anymore, but their shopping carts are still in sourcing process.
Thanks
JulianaHi PM,
Note 1269719 - display a more detailled message in abort popup
Symptom
In some cases, the SRM application cannot continue and must be aborted.
Then a popup is displayed with an error message "A fatal error occured in
the PD layer. The transaction needs to be terminated.".
The error message is quite general, it is displayed even if a more specific
error message is available.
Note 1174283 - SOCO: SC data will not be saved correctly in secend step
Symptom
You saved some data in the second step of Sourcing Cockpit using the button
'Save'. You closed the application and started it again.
You selected data in the first step of SOCO or went directly to the second
step. The system display a message: "A fatal error occured in the PD layer.
The transaction needs to be terminated".
regards
Muthu -
Windows 8 RDP error security package error occurred in the transport layer.
We have an issue where in windows 7 this rdp works fine but windows 8 gives this error on all machines.
Your computer can't connect to the remote computer because a security package error occurred in the transport layer. Retry the connection or contact your network administrator for assistance.Hi,
Thanks for your post.
Please elaborate your scenario. Which OS version you trying to access? Windows Server 2012 or earlier version? Trying to access Session Host, RemoteApp or VM?
Please install latest Windows update on both side. Verify the port 3389 was not blocked by firewall, anti-virus or intermediate device. In addition, check the event viewer, to see if any related error was recorded.
Best Regards,
Aiden
If you have any feedback on our support, please click
here
Aiden Cao
TechNet Community Support -
I don't know why I keep getting the following messge for a recent album I created in iphoto:
"An error occurred with the publication of album (name of album). Do you want to remove the album from your library?" In smaller letters under that message, is "The feed could not be found or is invalid." There are 2 buttons to click - either "Remove Album" or "Keep Album". Never had this issue before, did not do anything different this time.
Mac OS X v. 10.6.8
iphoto 09 v. 8.1.2 (424)Is this an album you're publishing as a MMe Gallery? If so delete the album and gallery, create a new album and gallery and try publishing again.
OT -
Hi Experts,
I am trying to create a database in my local system, while creating i am getting error like below can anyone please help me on this.
Msg 5105, Level 16, State 2, Line 1
A file activation error occurred. The physical file name ' C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\NewData\Demo_dynamic.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation.
Msg 1802, Level 16, State 1, Line 1
CREATE DATABASE failed. Some file names listed could not be created. Check related errors.
Awaiting for the response......!!
Niraj SevalkarI have created earlier database in 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA'
but now i have created one newdata folder and trying to create in it also i have checked the path what have you suggested above and the NewData folder is existed please check below snapshot
Both folders files and NewData folder which don't have any files
Niraj Sevalkar -
Error "Internal error occurred checking the external " while creating a job
Hi All,
I am getting an error while trying to schedule a job, Im not very shure abt what the job does, the user tried it and she got an error and asked me to do it.
A similer kind of job has been created in an other system and it works fine there. This job should run monthly and belowis the job step
The job runs on an external command and following are the paramerters
Name SAA_TP_CHECK
Parameters /usr/sap/transTCluster/bin/TP_DOMAIN_TD1.PFL
Operating sys. UNIX
Target server saptp1
This gives an error "Internal error occurred checking the external "
A similer kind of job that runs in a different system has the parameters as follows
Name SAA_TP_CHECK
Parameters /usr/sap/trans/bin/TP_DOMAIN_YD4.PFL
Operating sys. UNIX
Target server sapyp4
What might be causing the error, and how can this be solved. Please help!!!!Hi,
I think the issue is with the server .
Please check whether the Server name you are giving has the all the RFC connections.
I mean Remote Connection with the Server is establised or not.
Regards
Arbind -
Hi,
I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
When I login to owa for user test1 and preview the attachment it works fine.
However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
" An error occurred while the document preview was being created. Please try again later " as follows
I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Does the error appear when you directly access test 2 mailbox through OWA?
2. Check if there is 141 error in your event log.
3. Check whether Office web app server connects with Exchange server when the issue happens.
Access the URL: https://hostname/hosting/discovery
4. Grant full access permission again and check the result.
For more information about Office web app integration with Exchange, please refer to the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Error occurs while the user creates an vendor(MDM)
Hi,
The following error occurs when the user creates an vendor(MDM) and submits the form for validation on Enterprise portal.
" Could not create JCOClientConnection for logical System: MDM_WD_MODELDATA_DEST - Model: class com.xxxx.ven.crt.MDMBAPIValidateModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model"
Can any one help me out how to rectify this error?
Regards,
KNHello,
test MDM_WD_MODELDATA_DEST with webdynpro content admin rights . check sso or uid/pw given and system details as error message showing that JCO Destination configuration is wrong.
Regards,
Koti Reddy -
Error occurred in the source system
Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
The sequence for creating time series in LiveCache is:
1. Characteristic value combinations are created which in turn create
planning object in the system
2. The combination of version, planning area, and planning object is
initialized, creating time series in LiveCache. This combination is
so to speak the LiveCache anchor.
This error occurs if
o New characteristic value combinatons have been created for the
master palnning object structure that is assigned to the planning
area, but the time series objects were not created.
System response
Processing cannot continue.
Procedure
There are two methods of creating time series objects for individual
characteristic value combinations:
a) Re-initialize the version without deleting the time series
objects beforehand.
b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
In general SAP recommend that when you generate new characteristic value
combinations, you set the Create time series objects indicator. This
prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
TysonHi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang -
An Error occurred in the following Event Subscription: Event Subscription
Dear All,
i got a mail from WF mail which is below:
+From: XXXX WAX [mailto:wfmailer@XXX WAX.com.xx]+
Sent: Monday, March 28, 2011 3:24 PM
To: XXxxHrmsSupport
Subject: Action Required: Local Event ERROR : oracle.apps.ar.hz.Location.update / oracle.apps.ar.hz.Location.update32336
To SYSADMIN
Sent 28-MAR-11 15:23:08
ID 265172
An Error occurred in the following Event Subscription: Event Subscription
Event Error Name:
Event Error Message:
Event Error Stack:
Event Data: Event Data URL
Other Event Details:
Event Field Value
Event Name oracle.apps.ar.hz.Location.update
Event Key oracle.apps.ar.hz.Location.update32336
From Agent WF_DEFERRED
From System PROD.OWSC.COM
To Agent
To System
Priority 50
Send Date 28-MAR-2011 15:20:18
Receive Date 28-MAR-2011 15:21:35
Correlation ID
Parameter : USER_ID 2085
Parameter : RESP_ID 50348
Parameter : RESP_APPL_ID 660
Parameter : SECURITY_GROUP_ID 0
Parameter : ORG_ID 81
Parameter : LOCATION_ID 924
Parameter : #CURRENT_PHASE 101
Parameter : ERROR_TYPE ERROR
Parameter : SUB_GUID A242DC2FF79D70A7E030
Action History
Num
Action Date
Action
From
To
Details 1
+28-MAR-11 15:23:08+
Submit
SYSADMIN
SYSADMIN
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
Retry Raise Event
Retry Raise Event: Abort Raise Event with Event Key Raise Event with Event Key and Event Data Raise with Event Key, Event Data and Parameters Request Information
The client expecting detailed mail regarding this OED.. kindly help me to find this WF mail answer,,
What is this mail, what is the reason, what action i have to take for this ?
Regards
HameedDear Hussein,
Thank you for your support,
You have mention the excat document which is realted to my error.
Oracle.Apps.Ar.Hz.Location.Update / Oracle.Apps.Ar.Hz.Location.UpdateXXXXXX [ID 352888.1]i saw the soultion in this above document, still i have dought will you kindly clarify me !!
· If the event is enabled with subscriptions and that is giving some error message, it means that the user is trying to update the location and he is doing something wrong. Is this correct?
· If I disable the subscription from the production will that create any problem?
Kindly expecting your suggestion
Regards
Hameed
OS: Windows server 2003
Application : 11.5.10.2.0 -
Errors occured as the GLaccounts were being saved
Errors occurred as the G/L accounts were being saved
Message no. FIPOS019
Diagnosis
The commitment item cannot be assigned to the G/L account because the
state of the G/L account does not permit this transaction.
System Response
The G/L accounts affected are not saved. They have the status
Inconsistent.
If you have created a new commitment item for the G/L accounts, the
system saves that commitment item.
Procedure
Correct the G/L accounts, thereby making entry of commitment items
Check the relevant G/L accounts: Change G/L Account.
It is possible that the commitment item field is hidden in the field
status group for the G/L account.HI,
Check if the commitement item is the lowest node in the hierarchy...
May be Balance sheet account does not accept budgeted commitement iten..
Regards,
Chintan Joshi
Maybe you are looking for
-
Hello everyone, At my high school, we have a video bulletin board which is a repeating slideshow of announcements that we broadcast to the school over our in-house TV station. We have recently upgraded from using AppleWorks to Keynote '08... we also
-
How to update Spry-table and present the updated table in a div element?
Hello! I am using a very interesting AJAX-framework called Spry when designing a web page. Here the web page is: Link. I need some help. Every time a new project or shift is added, the changes are written to an xml-file. When the page is reloaded, Sp
-
I wish to convert a pdf document using a very small font from Cyrillic script into an MS Word document likewise using Cyrillic script. Then I could zoom up the size of the pdf document's script. Is there any way this can be done? Julyan Watts, Hunga
-
Clarification regarding Shadow Table
Hi All, Clarification regarding Shadow Table. FKK_GPSHAD is a shadow table that belongs to Business Partner. The doubts that i have is What is Shadow Table? What is the purpose of Shadow table? Is it correct way to update Shadow table Manually(Not us
-
<Moderator Message: Please search before posting. You can find a lot of information related to this issue searching the forums, the blogs and of course the online help.> Hi friends, I want do purchase extraction using LO cockpit extraction before doi