Create rules in RWB - Alert Configuration is not possible.

Hi
I'm setting up alerts on a PI-server.
However, when I try to create alerts in Runtime Workbench -> Alert Configuration, I am not allowed tou2026 I.e the u201CAdd Ruleu201D-button is never possible to use. I add a description and interface names. But the buttons stays dimmed like I'm not authorized or similar.
I do have all roles, even SAP_ALL so it shall be no problem with authorization.
Do I need to setup something in NWA or similar to enable this?
/Best Regards
Joakim

It seems to be a tricky issue.
I do have have the roles:
S_ALM_ROLE
S_ALM_CONF
S_ALM_CUST
and also SAP_ALL
What I do
1) Starts RWB -> Alert config
2) Adds description and interface names for my rule.
3) Tries to select one of the available alert categories below so the AlertCategory is entered and the "Add rule"-button becomes available. (It's always grey).
I also try to do step 3 before step 2.
This is a showstopper... I'll probably create an OSS-case instead. Unless nobody shouts "Herureka, I know the solution!"
/BR
Jocke

Similar Messages

  • Runtime workbeanch RWB - Alert Configuration link not working

    Hi,
    We are having issue opening one of the link in our SAP PI system.
    The link is http://Hotname:51400/rwp -> AlertConfiguration and
    Alert inbox.
    All other links [Component Monitoring,Message Monitoring, Performance Monitoring .......] on this runtime workbeanch page (http://Hotname:51400/rwp) are working fine, except ALERT CONFIGURATION and ALERT INBOX.
    Please suggest a solution.
    Thanks
    Ajay

    Thanks for all your suggestions.
    I have checked the FQDN hostname parameter in the exchange profile and it is as per.
    Also the t-code ALRTINBOX is working fine. The inbox is getting displayed in the web browser.
    Going back to the problem I have reported, when the link http://Hotname:51400/rwp -> AlertConfiguration is executed in turn this service is running the service u201Csxms_alertrulesu201D [Default_host/sap/bc/bsp/sap/sxms_alertrules/   from SICF].
    I have manually checked this service from SICF - sxms_alertrules -> Test service, even this service is failing to run with error u201CInternet Explorer cannot display the webpageu201D
    The link is hitting the browser with link u201Chttp://Hostname.Domain.net:8014/sap/bc/bsp/sap/sxms_alertrules?sap-client=100u201D
    The service is active but still this service is failing.
    Can anyone suggest solution out.
    Thanks
    Ajay

  • Transported Alert rule not visible in RWB - Alert Configuration

    Hi ,
    I have Transported Alert rule Using Below mentioned blog ..
    Know How to Transport Only the Required Alert Rules !!!
    I have followed the following Procedure
    1. Go to Transaction SE16 Data browser.
    2. Give the table name as SXMSALERTRULES and hit F7. Then Execute (F8).
    3. Copy the ALERTHASHVAL field value of the entries that needs to be transported.
    4. Go to transaction SE10 and Create a Workbench Request.
    5. Select the Task under Workbench Request and Go to Menu Request/Task -> Change Type and select Development/Correction.
    6. Double click the task and go to edit mode.
    7. Enter Program ID: R3TR, Object: TABU, Objects Name: SXMSALERTRULES, press Enter and click on Functions.
    8. Paste the ALERTHASHVAL field value copied in Step-3 and Save.
    Now I can see the transported entries in SXMSALERTRULES table . But when I check RWB- Alert Configurations .. There is no new entry for  above transported rule ...
    Please tell me what is missing or where am i wrong ...

    Yes, My problem is Resolved ....
    Solution : -
    After Transport All Alert Rules, - >
    I created  Manual entry for any one of the alert rule from Alert Configuration. ->
    Then automatically all other transported rule came into visible state ....
    So now i can see all my transported rule in Alert Config...
    I dont Know , How does it happaned .. But it worked for me ... All rules got visible to me only after creating a manual entry for amy one of the alert rule ...
    Hope it helps someone else ...
    Guys thanks for all your comments ...
    Regards
    PS

  • Alert Configuration can not log on!!

    hi gurus:
    I click  Alert Configuration or Alert Inbox  in RWB, a window popup ask for user id and password,  user id and password of SAP NetWeaver Application Server [XID/000]u201D
    i input user name with SAP_ALL authotization, but can not logon,  if i cancel this logon, erro display like this:
      URL http://sapittest:50000/sap/bc/bsp/sap/sxms_alertrules/main.do error due to log on data
    i check SICF,alertinbox and sxms_alertrules is active,  use program RSXMB_ACTIVATE_ICF_SERVICES to check web service and all are active.
    i have checked Note 750287 - Runtime Workbench: Alert configuration does not start, the configuration in exchange profile is correct.
    what should i do, does anyone have good idea for this ?
      thank you very much
    Edited by: cheng1974 on Dec 3, 2010 4:04 AM

    URL http://sapittest:50000/sap/bc/bsp/sap/sxms_alertrules/main.do error due to log on data
    Maintain FQDN (fully qualified domain name) in exchange profile for your PI server.....it may look something like sapittest.abcompany.com ....take help from the basis/ admin team and then again try to login.
    Regards,
    Abhishek.

  • No Function Identifier maintained. Configuration check not possible

    Dear PM team,
    While doing the Equipment installation with goods movement through IE4N, transaction code, system throwing following error messages.
    1. No function identifier maintained. Configuration check not possible
    2. Message for the configuration check.
    Please guide me where i did the mistake? and suggest me how to correct this error message, without doing the changes in message controls.
    thanks & regards
    JK

    JK,
    My guess is that you are using Configuration Control.
    If so, then have a look at these transactions:
    PeteA

  • How to enable Add Rule Button in ALERT configuration in RWB

    Hi All
    The Alert Configuration page is behaving strange and I am not able to create Alert Rules. The Add Rule button is disabled. The input in the page is getting reset once any user action is performed.
    Thank you
    Raj

    Hi,
    Did u check the User Roles ? Just check for that
    XIRWBUSER ROles is below;
    SAP_BC_BASIS_ADMIN
    SAP_BC_BASIS_MONITORING
    SAP_XI_RWB_SERV_USER
    SAP_XI_RWB_SERV_USER_MAIN
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/87/ca12416c17ef6fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
    Alert Config
    Alerts
    Regards,
    Moorthy

  • Alert configuration/Inbox not opening

    Hi Experts,
    I am facing the following error in our recently installed PI 7.1  when I give log in credentials for alert configuration/Inbox in RWB.
    Logon failed
    What has happened?
    Call of URL http://<host name>:50000/sap/bc/bsp/sap/alertinbox/index.htm terminated due to error in logon data.
    What can I do?
    Check the validity of your SSO ticket for this system.
    If you do not yet have a user ID, contact your system administrator.
    Error Code: ICF-LE-http-c:400-l:E-T:21-C:3-U:5-P:-L:7
    HTTP 401 - Unauthorized
    Your SAP Internet Communication Framework Team
    Does it mean valid SSO in not in place and Do I have to configure SSO for my system?
    Please confirm and  let me know the steps for SSO.
    Regards,
    Dinakar
    Edited by: mutnuru dinakar on May 9, 2011 8:31 PM

    Hi All,
    In our PI dev server I am facing the below errors while opening Alert configuration/Inbox links in RWB.
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    BSP Exception: Internal Error in Business Server Page Runtime.
    Program CL_BSP_PAGE_BASE==============CP
    Include CL_BSP_PAGE_BASE==============CM01A
    Line 115 
    Error type:
    Your SAP Business Server Pages Team
    Or
    500 connection time out ,Connectio to partner timed out after 600s.
    I have added the FQDN in Exchange profiles and activated the services in SICF.
    Infact with same settings in PRD server it is working fine.
    Please tell me what is going wrong in DEV server.
    Regards,
    Dinakar

  • Alert Configuration : 404 Not Found The requested resource does not exist

    Hi all ,
      We are facing problem in Alert configuration and
      Alert Inbox . We are on SP14 service patch
      We are getting error as " 404 Not Found The requested 
      resource does not exist "
      We have activated all the necessary services in
      Tcode : SICF as mentioned in the config. guide
      We have executed the program :
      SXMB_ACTIVATE_ICF_SERVICES
      We have referred the SAP note : 750287 and tried to
      set the httpport as per the note but again we are
      getting error as "The page cannot be displayed" .
        We have checked the parameters in Exchange profile
      for httpport as well as for host also .
      Can someone please guide us on this . 
      Thanks 
      Shikha

    Hi all ,
    Thanks for the replies .
    Shravan ,
    I pinged my XI and is working . we have already added 
    the IP Address and the host name , but the same error
    is coming .
    Anirban,
    Checked all the necessary services again as suggested
    by  you .
    Andreas ,
    > is to set the abap profile parameter
           LOCALHOSTFULL to the fqhn.
    Can you please let me know where to set the abap
    profile parameter "LOCALHOSTFULL" as suggested by you .
    Thanks
    Shikha

  • Alert configuration - 404 Not found

    Hi, on our PI 7.0 i wanted to get in contact with alert configuration. Unfortunately this does not be activated or sth.I am getting 404 not found. Does somebody have a clue how to activate or install this?!
    br Jens

    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - this weblog should help you with a checklist
    Further reference:
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Roles for Alert Management
    1. SAP_ALM_ADMINISTRATOR
    2. SAP_ALM_CUSTOMIZER
    3. SAP_BC_ALM_ALERT_USER
    Sap Notes - 913858 ,824039, 750287

  • Logon to RWB Alert Configuration

    Hi,
    I am trying to logon to the alert configuration and alert inbox sections of my runtime workbench.  None of my users seem to work including XIRWBUSER or XISUPER.  Is there a special user required for this section of the workbench?
    Thanks in advance
    John

    Hi Santhosh,
    Thanks for your quick response.  I'm using the super user XISUPER who has the role SAP_XI_MONITOR.  The role SAP_XI_MONITORING doesn't seem to exist.

  • At RWB, get "SSO is not possible", please help

    At the http://host:port/rep/start/index.jsp, click RWB, on the second
    screen, click "configuration", I get "Single sign on is not possible".
    Would you please shed some light how to fix it?
    Points guaranteed, thanks!

    Hi,
    This SAP note may help u- 757373, 768456
    Regards,
    moorthy

  • I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

    I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

    Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

  • Cin configuration is not possible at 000 client of sap4.7

    how i can configure cin at 000 client of sap4.7 as i could not create my own enterprise structure with reference to 0001 or 1000 co.code.
    kindly help me with sugession.
    kaushik

    i have solved myself using tcode scc4

  • Creating rows through entity variable makes updates not possible

    I went through the following basic scenario of using entity variables in my BPEL process running in SOA Suite 11.1.1.3.0.
    We have an ADF business component (SDO) deployed in the SOA environment which represents an updatable View object with all available methods exposed in the service interface. The primary key column in the underlying entity object is filled from an Oracle sequence when the entity is created.
    When triying to make use of this SDO through entity variables later on I encounted the following strange behavior.
    The Create Entity activity being placed alone in the BPEL can successfully create an entity, no problem with that. The transaction gets committed and a new row is inserted in the database. But trying to make this simplest scenario a bit more complex fails... Indeed let's put a simple Assign activity after the Create Entity activity and change some field's value. Running the process results in a fault being thrown with this in the stack trace :
    Caused by: oracle.jbo.service.errors.ServiceException: JBO-25020: View row with key oracle.jbo.Key[2942 ] is not found in Ta
    xOfficeView1.
    at oracle.jbo.common.sdo.SDOValueStoreHelper.constructServiceException(SDOValueStoreHelper.java:2119)
    at oracle.jbo.server.svc.ServiceImpl.constructServiceException(ServiceImpl.java:649)
    at oracle.jbo.server.svc.ServiceImpl.constructRowNotFoundExcep(ServiceImpl.java:659)
    at oracle.jbo.server.svc.ServiceImpl.update(ServiceImpl.java:1630)
    at oracle.jbo.server.svc.ServiceImpl.processChangeObject(ServiceImpl.java:2879)
    at oracle.jbo.server.svc.ServiceImpl.processChangeSummary(ServiceImpl.java:1996)
    at org.stau.sdo.server.serviceinterface.AppModuleServiceImpl.processCSTaxOfficeView1(AppModuleServiceImpl.java:203)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    This basically means that Create Entity succeeded getting the primary key value from the sequence and prepared the row for creation but a posterior update could not locate it in the view object. Probably the runtime was trying to get the row from the database but since the transaction had not committed yet it did not find the row.
    I've been trying with no success to get any working samples in the Oracle documentation or any traces in Google about using entity variables to create and update rows in the same BPEL. The only references I found were about binding to existing rows and then updating them. I tried this out, it works but I need to CREATE and UPDATE rows!
    Has anyone run into this issue already?

    Hello.
    Yes, I've met this issue.
    The root of the issue in your Entity Object. I suppose that Pk is auto generated by sequence in your database. You should open your EO, then chose Attributes, then double click on primary key attribute. The screen named "Edit Attribute: <your primary key>" opened. Check the box Refresh After "Insert" in the bottom right corner of this screen. It means that after inserting of a new Pk in your table this one will be re-read back to VO and therefore you will be able to update the Entity variable. Clear all, rebuild, redeploy, enjoy.
    You should to do it for all EOs you are going to use for creating Entity variables.

  • I want to redirect mails having attachments to other account automatically by creating rules or using automator. Is that possible?

    I have a problem opening mails that have attachment in it because the corporate policy does't allow downloading attachments. I want to redirect those mails to my corporate account so that I can download attachments using corporate mail client.
    Is that possible?

    Just add a rule and select "Attachment type" then in the drop down menu select what kind.
    If you want all of those attachment types to be sent to the other account or what not. Then you're going have to click on the + on the far right until you've filled them all... I did a few of them for an example.
    KOT

Maybe you are looking for