Create sap-source system in netweaver

Hello,
i want to create a R/3-(4.6c)-source system in my Netweaver-BI (2004s), but I have problems with the connection.
For the connection i created in the Netweaver a new destination and a user "User_A" with the profile "S_BI-WX_RFC / Business Information Warehouse: RFC-User in Warehouse.
In the R/3 I created a user "User_B" with the profile "S_BI-WX_RFC / Business Information Warehouse, RFC-User Extraction"
After creating the Source-System in the AWB with the destination and the 2 Users, I have to Log-On as an administrator in the R/3. After Log-In comes the message "User already exists in source system. Only continue if Profile and Password Are Correct."
Then I have to create the Destination in the R/3. There I fill in the "Logon"-Part my "User_A", but then I get the alert:
RFC user logon failed. Check the connection. Message no. R3 077.
Diagnosis: You tried to logon using the RFC user. This action failed.
System response: Name or Password not correct
But I'm sure that I made no mistake with the password.
Has anyone an idea what I did wrong?
Thanks
Malte

Hi,
Generally we maintain the Destinations and userids in both systems first, and then create the source sytem in AWB of BIW.
Have you created the Logical system names in both the systems ?
Have assigned the client to the logical system name to client in both systems?
Have you mentioned correct client in the destinations?
With rgds,
Anil Kumar Sharma .P

Similar Messages

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon Client for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS D01MAND700
RLOGSYS D01MAND700
OBJSTAT ACT
BIDOCTYP ZSCA017
TSIDOC3X 0
TSPREFIX CA
SRCTYPE M
SAPREL 700
TSTPNM D78358
TIMESTMP 20.070.622.093.042
SBWBCRL 700
RBWBCRL 700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

SAP Source system creation in BI

Hi Gurus,
I am trying to create SAP source system in BI, The trying to create ALE REMOTE user in both systems.
What roles and profiles i need to assign to this user id. After creating user ids what steps i need to follow. Thanks.
Best Regards,
Suresh.

Hi,
To Create SAP Source System In BI:
-Click on Source System tab in RSA1.
-Then right click on the heading Source system and select Create.
-Select the first option Automatic. Create SAP System and continue filling the other details.
-This will create Source system automatically.
When you enter background user's password, sap system user name is modifiable, but the the BI user.
The background user of BI system, is defined in
RSA1 => Settings => Global Settings
BW User ALE field will have the name of the background user in BI.
If you are using ALEREMOTE as background user, make sure the same is maintained as BW User ALE.
regards,
Pruthvi R
Message was edited by:
Pruthvi R

Create ECC source systems to talk to BI

I am a developer and the system that I am working with do not have the source systems created. There is no Basis support here yet. Would someone help by listing the steps to create the source systems, so that the ECC systems can talk to the BI NW2004s system? I want to be able to load data.

Hi,
Please check these links.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps
Regards.

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Data Reconciliation Node on SAP Source System

Hi Gurus,
I'm working on Data Reconciliation between SAP BI and SAP R3 systems. I've read on the forum that the reconciliation DataSource technology is available as of PI-BASIS 2005.1 / SAP NetWeaver 2004s. I'm using
SW Comp Release Level Highest Support Desc
PI_BASIS 2005_1_640 0017 SAPKIPYJ6H Basis Plug-In (PI_BASIS) 2005_1_640
I wonder that I cannot see the Data Reconciliation Node in the transaction RSA6 in the SAP Source System. Please throw some light on this whether I need to activate them.
Thanks & Regards,
Ash.

Hi Sunny,
Thanks for your response. Can you suggest me what should I do to get those DataSources? Are there any patches that SAP has released to overcome this problem for lower versions as the one which I'm using?
Thanks,
Ash.

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

SAP Source System showing up as BI Source System in RSA1

I have 2 BW systems and 2 CRM Systems. In one BW system, when I create a SAP Source system in RSA1, It gets listed as a SAP Sources system along with ECC and all the rest.
The Logicial Systems and RFC Connections all appear to be the same between each pair.
In the other system, using identical procedure, it the source system gets listed as a BI Source System. The 2 CRM systems have identical components and version levels as do the 2 BW systems.
Any idea why and if this would make any difference and how to correct.

Hi,
To fix this, you need to do a restore (& not a delete) of the source system in BW, having deleted the RSBASIDOC entry in the source OLTP system.
This will force the BW system to interrogate the RSBASIDOC table entry in the source system again and it should then realise that it is an R/3 system (not a BW system) and move the entry to the SAP folder.
Rgds,
Colum

Non-Sap source systems

Hello, i need to ask about db connect. who needs to create the initial db connect connection? basis or bi person? also, what is the process if it is bi person's responsibility? Do i need to create a sm59 connection under "HTTPS Connection to external server". then go under db connect under rsa1 > source system and create a system there? please help. thanks

Hi Vik,
Please follow the below steps in RSA1 to create Source system
Create DBMS Source system in Source System folder of Administrative WorkBench(RSA1). Fill in the following fields
1. DB Connection = (Logical System Name)
2. DMBS =(DBMS name u2014 see above)
3. User Name & DB Password = (Database username and password)
4. Connection Info = ( database and host name on which database is running)
5. Permanent = (if checked; the SAP workflow will try to re-establish the interrupted connection)
6. Connection Limit = ( number of simultaneous connection to DBMS; 0=max(255), 1=1, 10=10)
7. Connection Optimum.
Create DataSource: Call Transaction Code RSDBC u2013 Maintenance screen DB Connect: Overview of Tables and Views. The Following entries should be maintained in this screen.
1. Application Component
2. DataSource Type
3.Transfer
4. Selection
5. Display Data from the Table or View
6. Checking the DataSource
7. Generate DataSource:
Hope this helps
Regards,
Venkatesh.

Non-SAP Source systems for gas and power trading operations

Hi Experts, I have this client who has no R/3 systems. They have few MS Access databases, Oracle systems annd MS SQL DB. I have seen some of the most commonly used tables in all the databases and doesn't look like there are not even a single InfoObject that is similar to any one in Business Content. Now this makes me feel that I need create everything from scratch. Can anybosy guide me on the best way to go about extracting data from this non-SAP systems. Right from connecting to these systems to extracting data in BI to creating some meaningful reports.
They do not have the concept of Master data here. All they have is Data in the MS Access databases.I need some assistance from experts here in how do I go about organizing this.

hi,
The BW can be connected to Non-SAP data using DB or UD connect.
The data in Non-SAP source system is staged in form of tables.
You can extract the data using Data Source based on DB or UD connection.you can define new info objects and data flow which extracts the data. In DS description you can mention the Non-SAP source system tables from where you want to extract the data, after that u can mention the fields to be extracted in BW.
regards,
Arvind.

Creating new Source system problem

Hi there,
System: BW 3.5 client 010, want to connect to R/3 4.6c Sandbox client 0101
we just refreshed our BW 3.5 sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
Error:
Logical system BIX010 exists already
Message no. R3222
Diagnosis
The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
I tried to create the system manually and automatically, still no luck.
I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
Does anyone knows where to look for?
Thanks in Advance
Kumar

Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
Regards,
Juergen

Problem in creating SRM source system in BW

hi all,
as much i knw. i can say that there are 4 steps in creating SRM source system in BW :-
1) creating logical system for SRM client
2)creating logical system for BW client
3)naming background user
4)creating SRM source system in BW.
now i am facing some basic problems....
1) I logon to SRM system using client 001 so do i need to assign SRM logical system i am creating to this client only.
2) same way i logon to BW using client 800, so do i need to assign BW logical system to client 800.
3)how can i create background users for link to SRM.
4)does anything needs to be done in RFC.

Hi,
Once you read the following help on creating source system,Most of teh doubts will be cleared :
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
With rgds,
Anil Kumar Sharma .P

How to create WebService Source System?

Hi,
I am trying to integrate XI and BI. How do I create a webservice source system? When I create the webservice source system in RSA1, it asks for a logical system name. Do I need to create a RFC destination for this logical system? What other steps should be done here?
Thanks,
Deepthi

Thank you. I am actually referring to step 5 in the below how-to-guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
The step 5 says "create webservice source system". But, it does not give details as to what steps should be taken to actually create this. Anyone, used this approach?
Thanks,
Deepthi

Lots of tables in the non-SAP source systems

Hi All,
Earlier I asked a question on SDN about having about 50 tables in non-SAP source systems like SQL, Oracle, etc. According to the functional/business folks here, I'm supposed to be extracting only 1 or 2 fields from many tables. So I got a reply from SDN that I should recommened creating Views and client also agreed. Now I do not see any official documentation from SAP that that says that I should create Views in the source ysystem wherever it is possible. Any help in getting this information is very helpful.

Hi,
1. authorization: normally the database admin create you a new user. It's easier to get read authoriziation for your own views.
2. a problem is the naming convension of tables and fields - the BW/database connector supported not all. create the fields
- in upper case and
- a length of ... (16 characteristcis?)
- without special signs.
=> looking in service.sap.com/notes for "DB connect"
3. changing of data source: when you need a second table for the data extraction, then you have to create a new datasource.
=> create a view directly (its the same to multiprovider. Don't work with the object directly - create a view).
Sven

Create sap-source system in netweaver

Similar Messages

Maybe you are looking for