Create set of operating recover discs

Hello
I like to create a set of operating system recovery discs.my manager shows my just the button: Recovery media creation.Where can i find the right button?
HP g7 1333 notbook
Thanks for answer

Hi
Please find the link given below will give you step by step process to help you create Recovery Disc.
Create a set of operating system recovery discs
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01895783&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

Creating Recover Disc - HP Pavilion 17 - I'm a novice at this and really need support

I downloaded information and directions for doing this procedure from the HP website. I have a couple of questions to clarify some of my concerns.
1. Using dvd - is the writable dvd the same one you would use for burning videos or different?
2. I just now learned that this procedure should have been done right after I purchased the computer. The only information I have on my PC are my emails. I have not bought any software yet. Just have the factory installed stuff. My question regarding this is in the article that states it will not save all software but you can save software to a system image using windows 8 to crate a system image. I have instructions to do that but ned opions on whether I shuld just do it for only my files emails) or do it for drivers, windows, system settings programs files: . It also states the following which is very confusing to me that HP recovery restores the software image to its original condition. Any software that was installed later is removed when you perform an HP recovery. Does this mean if I do the HP recoveering first that I will lose my emails as well as the favorites bar that I have created for ease of connecting to important websites without typing in the address. It was created for me and is installed with my verizon internet provider screen.
3. I have an ALERT stating that windows 8 update hangs at 12% 13% 14% or 15%. This alert appeared on the HP Product detection/HP warranty results website and also another website that I don't remeber. What does this mean? I have no idea if I'm suppose to do something.
I really need your help and opinions on how I should proceed on the above problems.
Lynn
I have instructions to do that but need opinions on whether I should just do it for only my files (emails) or do it to cover the drives, windows, system settings, programs and files? It
This question was solved.
View Solution.

joseysgirl wrote:
Thank you so much for your quick reply. I do have some questions/comments to verify that I understand your responses.
1. DVD's - I understand that I should use the best discs that will work in my DVD, such as Verbatim, Sony, etc.
In addition to that is there any other preferences for the actual DVD, such as for using on a 64-bit process that I have on my notebook, speed, other important features? No, just get good quality DVD +R or -R discs. Sony usually works well for me.
2. I unerstand that the actual creation of the recovery disc will in no way affect my added software and created documents such as my e-mails, and favorites bar, etc, that it only covers the factory installed items..Correct. Using the discs to restore/reinstall on the laptop puts it back to out of box state.With this procedure many people use a regular backup of files to put back on the machine after a factory Recovery.An external USB Hard drive is very nice for this,but backups can also be done on DVDs.
3. Creating a system image - am I correct in assuming this process does not duplicate any of the items in the created recover discs? Also, as you add more info such as software, douments, etc. to your computer requires another system image creation. It duplicates items in Recovery such as Windows,drivers & software- but is also an exact copy of the hard drive with your added files, newly installed programs, photos,etc. All of your personal files + the files in Recovery Discs are in an Image. Opposite effect of restoring with Recovery Discs-this process restores laptop with original Windows,software & drivers plus your added files. And yes- additional Images would be needed to keep an up to date image.
4. USB Flash drive - I have no idea what this is but I have instructions for using this procedure for creating recovery image to a use flash drive and that it is a faster process than using DVD's. Is the USB flash ddrive something that I have to purchase, is it expensive and does my PC have the capability of using this process? Your laptop has capabilty to make Recovery on USB- but actually this process is giving owners more trouble than DVDs. Many times resulting in buying several flash drives before finding one that works. My advice-stck with DVDs.
Thanks for your help.
Here is the complete info on my notebook.
HP Pavilion 17-e040us
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I have an HP Pavilion g6 laptop, and am trying to set up my recovery discs. I get an error message

I have an HP Pavilion g6 laptop, and am trying to set up my recovery discs. I get an error message that states "inserted media not supported". I am using CD-R Music discs. Is the problem "Music" ? Will it not recognize a blank music disc?

Hi,
Yes, it is the discs that are the problem - you will need to use good quality DVD+R or DVD-R discs. See the section under the sub-heading 'Create a set of operating system Recovery Discs' on the link below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01895783
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Creating a bootable Lion install disc/disk and using it

Hi all,
Below is a copy of a method ds store posted for creating a bootable Lion install disc. Some questions:
1. Is this a polished final version of the process, or are there other steps which could/should be added?
2. Are there any disadvantages to going this route instead of installing directly onto a Mac?
3. After creating a Lion install disc/disk via this method and using this saved dmg to install Lion on a Mac, will it set up the Mac exactly the same way it would by downloading/installing directly from the Apple Store (sounds like a "duh" question, but nothing would surprise me with Lion)?
4. Exact size of this dmg (in case I want to use a flash drive instead)?
I have been avoiding Lion, hoping it would shape up. I'm still not satisfied and will not run it on my main machines. (Of course ymmv; I'm not looking to be talked into or out of using Lion.) However, I am ******* (hmmm, I guess l-u-s-t-i-n-g is a bad word!) over a new Mac Mini, which will have Lion installed, with no chance of running SL on it due to the new hardware revision. Thus, I'm either going to have to make peace with Lion or forget about a new Mini. I guess I'll have to give Lion a try, but I still don't want to actually run it on any of my machines; thus, I want to run it from an external drive, playing with it as I have time/desire, leading to more questions.
5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
6. How much space is needed on a destination disc/disk to install Lion?
7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP. Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
10. Any constructive suggestions on anything related to any of these steps is welcome!
Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
Thanks!
Backup Lion Bootable 10.7 Disk
Purchase and download Lion from the Mac App Store on any Lion compatible Mac running Snow Leopard.
Right click on “Mac OS X     Lion”     installer and choose the option to     “Show Package Contents.”
Inside the Contents folder     that     appears you will find a SharedSupport     folder and inside the     SharedSupport folder     you will find the “InstallESD.dmg.” This is         the Lion boot disc image we have all been waiting for.
Copy “InstallESD.dmg” to         another folder like the Desktop.
Launch Disk Utility and click     the     burn button.
Select the copied “InstallESD.dmg” as the image to     burn,     insert a standard sized 4.7 GB DVD,     and wait for your new Lion Boot     Disc to come     out toasty hot.
With this disc you can boot any Lion compatible Mac, andinstall10.7 just like you installed previous version of Mac OS X. Youcan even use Disk Utility's Restore function to image your Lion bootdisc image onto a external drive suitable for performing a cleaninstall on a optical-drive-less MacBook Air, or Mac mini server.

tjk wrote:
5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
DVD: no, flash drive: if it's large enough, external hard drive: yes
6. How much space is needed on a destination disc/disk to install Lion?
Whatever Apple minimum requirements are.
7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
possibly, never tried it, it is a dmg so it's a volume all to itself, except it can't install to the same media it's on and can only install to something formatted with GUID and a OS X extended format, like a flash drive or hard drive large enough.
DVD's can't be formatted with a GUID EFI partiton
8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
Speed limitation of the media and bus your using, USB 1 is a slower than a hard drive with 7,200 RPM on a Firewire 800 port
9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP.
The problems come from installing Lion over a existing Snow Leopard setup that isn't quite pristine enough for Lions quirkyness, has tweaks or other software installed that breaks 10.7, requiring you to fix it.
You can try it, you've got the 10.6 clone to option boot off of and restore from.
Cloning back and forth is a performance enhancer, not a problem solver.
Ideally it's best to clone 10.6, disconnect, zero and install 10.6, same user name, then up to 10.6.8, then to 10.7, then install programs from fresh sources/copies and then files returned last from backup off the clone (no migration assistant or it brings trouble back)
This will ensure the best possible performance possible with the least trouble as everything is wiped and installed fresh. Only problem being your files it there is something wrong with them, which is easy to remedy to the cause as it's the only thing not pristine.
Once you've got a pristine system, then clone that twice, once for a immediate update other for falling back a week, two weeks or even a month back.
Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
Firmware is hardware specific not OS specific, of course it's possible a old version of a OS won't work with newer firmware, like 10.5 for instance perhaps because Apple has dropped all work on PPC code.
10.6 and 10.7 are just fine with most all present firmware, however there will be a time where a new firmware update could disallow 10.6, likely when iOS X 10.8 Bobcat arrives.
10. Any constructive suggestions on anything related to any of these steps is welcome!
Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
Cloning only clones the Lion OS X Partition, not the Lion Recovery Partition.
A comptuer that is Lion capable will boot off a media with no Lion Recovery Partition.
You need to create a Lion Disk Assistant USB which copies your Lion Recovery Partition.
It's in my post.
https://discussions.apple.com/message/16276201#16276201

How to make a set of Product Recovery discs

Hi everybody.
          I meet some problem ,and need help.
          My notebook is T61p with Vista system
          I want to create a set of Product Recovery discs.And I click Start --> All Programs --> ThinkVantage --> Create Recovery Media.
          However ,I can't find Create Recovery Media in my PC .
          Where can I download the  Create Recovery Media and install it ?
          Anyone can help?
          Thanks!
Message Edited by SunWill on 07-22-2008 10:16 PM

Try to find the the program RRmedia.exe with windows search.
Click it to start and create your media. You´ll need more than 6 CD´s or 2 or 3 DVD´s.
In my system (XP) you´ll find RRmedia.exe in: "C:\Programme\Gemeinsame Dateien\Lenovo\spi\RRMedia.exe"
Message Edited by Agotthelf on 07-23-2008 07:47 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community      Deutsche Community      Comunidad en Español

Recovered discs for hp pavilion a1710n

need to find recovered discs for pc any ideas hp is showing they dont have
This question was solved.
View Solution.

mdlady wrote:
it is vista only year old hp is showing online they dont have have not call yet will on monday let me ask this it said boot configuration data file is missing required information what do you think help please
If Windows fails to start because it failed to read the boot configuration data and it’s asking you to insert the operating system disc, you can try rebuilding the boot configuration data (BCD).
Press F11 at boot and go into the Recovery Manager.
Press Alt + D to launch the Command Prompt.
Type “C:” and hit enter.
Type “bootrec /rebuildbcd” and hit enter
It will locate the Windows installations and ask you to add it to the configuration. You’ll need to select the appropriate number for yes and then hit enter. (If it finds 0 installations, you’ll have to try rebuilding it manually – doesn’t work very often)
That’s it, reboot the notebook and you’ll probably have to select “Start Windows Normally” and it should hopefully load fine.
If you get an error message stating “… is not recognized as an internal or external command” then the command has been typed incorrectly.

Error while creating PO in operation subcontracting

I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error

Hi Sam,
please check ,
Assign a recursive BOM for the material for which you want to create the purchase order .ie. create a BOM of mat say X having a component X and marking the indicator recursive ticked.
Please create the BOM which is valid much before the date of creating a purchase requisition .
And proceed for the creation of subcontract purchase requisition.
Please Revert back, if the problem is solved.
OMKAR

Error while creating model classes, operation aborted in NWDS

Hi All,
When i select Adaptive rfc 2 model and then search for the RFC, when i select RFC and click on next i get an error while importing :
Error while creating model classes, operation aborted.
It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
Can any one help me out??
Regards,
Pradeep kumar
Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

Hai guys thanks for reply
Tushar,
I am using NWDS 7.2, ce7.2 server, ECC 6.0.
Amit,
I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
Deepak,
I am unable to create model in other projects also.
I have sufficient amount of memory in my drive.
I have imported the DC to other NWDS but it gives same error.
Thanks for all,
Regards,
Pradeep Kumar G
Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

Error "No entry in table T551A" while creating set work schedule rule.

Dear Team,
I am getting following error while creating set work schedule rule.
Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
Request you to please help me out.
Regards
Shab.

HI, there are 8 steps you need to do below:
1. Group Personnel Subareas for the Daily Work Schedule
2. Group Personnel Subareas for the Work Schedule
3. Define Break Schedules
4. Define Daily Work Schedules
5. Define Period Work Schedules
6. Define Employee Subgroup Groupings
7. Define Groupings for the Public Holiday Calendar
8. Set Work Schedule Rules and Work Schedules
All of them belong to TIME MANAGEMENT. I think you miss some steps above.
Please check it again.
Regards!
Minh

How do I get recover disc for vista when system will not boot???? For Pavilion pc a6157c

Pavilion pc a6157c How do I get recover disc for vista when system will not boot????

Read THIS HP Support Document concerning ordering recovery discs for your HP a6157c. Go to THIS HP webpage to order the "Vista Home Premium 32bit 73NAv3PrA1 + Supp 4 Recovery Kit" for your computer. If you are not looking to order the recovery discs or have some other issue with your computer, please provide detailed information concerning the problem.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Creating sets using a table data

Hi,
I have a table TVBVK which is for sales and not related to FI data. I am trying to create sets so that the sales office would be the parent node and the sales group would be the child. I am using GS01 and it seems that it would not work because the parent which is the sales office value that is different from the child value that is the sales group.
How would I create an hierarchy using sets by reading from this table? Would it be possible? Could I create sets so that the field names are different?
Thanks

Hi,
How woull that be? Would you elaborate why?
Thanks
Will

FI create sets

Dear SAPPERS
Please send me FI create Sets document in pdf format.
I appreciate your help.
My email ID [email protected]

Sets can be used in validations or subtitutions.
Perhaps you want to validate that for example account is included in a group of accounts... then you need to create a set that include all the accounts.
example
validate if account is in set "bank_accounts"
set bank account included the accounts : 572000, 573000
Sets can be used what ever you want to check if some value is included or not into a group of parameters (accounts, company codes, document class, etc etc etc)

Creating a Win7 OS install disc via recovery tools?

Is there any way to clean install Win7 (that is, nothing but the OS) from the Lenovo recovery discs I made via the ThinkVantage tool, or is it limited to a full factory-fresh restore only?
If that's the case, is it possible to create a Win7-only install disc from the recovery partition?
TIA

From what I know, you will need ImageUltra Builder tool installed to do this. The trial version can be downloaded from Lenovo/IBM website. TVT R&R OS installation files were created by this tool. The OEM/CTO build was prepared by Lenovo's ITC team.
However, if you want to do this yourself, I would recommend you to use a Microsoft tool called Windows7-USB-DVD-tool. This tool can automatically expand ISO OS installation file to USB flash memory cards or a DVD. More importantly, it's bootable. You can install WIN7 directly from USB flash memory or a backup DVD.
http://forums.lenovo.com/t5/Windows-7-Launch/Installing-windows-7-from-a-USB-Drive-Suitable-for-netb...

How to create set hierarchies from FI SL.

Hi Experts,
How to create set hierarchies from FI SL. Could you please tell me
Step by step procedures or send to this mail id [email protected]
Thanks
Regards,
Sathis.J

Hi,
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Hope This Helps.
Thanks,
Sankar M

Best way to set up a scratch disc for a shared project?

I am currently working on a project with 4 seperate computers and users working from a shared external 10TB drive. What is the best way to set up the scratch disc and media cache folders?
Each worker is editing a sequence and then posting back to the 10TB drive.

Use the identical path (including drive letter) for Media Cache,
Preview Files and source media files on all machines.
Premiere will look to absolute, not relative paths for these files.

Create set of operating recover discs

Similar Messages

Maybe you are looking for