Create shape pop-up dialog box

I am trying to determine what I perceive as a quirk in the Draw Shpe tool (Rectangle, Ellipse, etc.). Usually, I touch the tool, draw my shape and... done! But occasionally through some accidental mouse-motion that I cannot determine, I get the shape plus the pop-up dialog shown below. Can anyone tell me
What mouse-movement, apparently just as I have completed the shape, is bringing up the dialog box?
Is there a way to prevent this from happening in Preferences?
Is this new to Photoshop CC? I have been a casual Photoshop user since Version 2, but I have only seen this in CC, and then, only in the last month or two.
Thanks to all who can shed some light!

I solved the problem, and, as it turns out, it had nothing to do with Photoshop, but rather with a mouse that had started to go bad. I replaced the mouse and all mouse-motion behaviors returned to normal.

Similar Messages

How can I Create custom pop up dialog box with question/answer

I need to create a pop up dialog box that asks a question and accepts an answer input. The form needs to be able to be emailed out (not server based) Can someone help me do this? I am a designer, with very (Very!) limited coding skills. Looks like the windjack program that I keep running into does not work with Acrobat X.
Thanks for any help you may have

I am not able to help you with the current method you are using - which seems an odd one in that you are using a menu script to do this????
I would have done the page completely differently - instead of slicing it up into a vastly complex table, I'd have added the image to the page and then used an imagemap. Then I'd have used this script to add the popups (as toolitps) that you can be as simple or as complex as you wish: http://boxover.swazz.org/.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Open pop up dialog box

I read on article i.e to create new pop up dialog box. We have to use launchListener"#{backing_bean.handleLaunch}" to pass parameter to corresponding pop up dialog box.
Anyway I tried to do the same job declaratively by using setActionListener instead of launchListener. The pop up dialog box gets the passed parameter using EL #{prossesScope.param} And it works.
Is this fine technique or not recommended at all?
Regards
Eric H

Hi,
its fine as well. As soon as the dialog is opened the process scope becomes accessible. With multiple parameters you will however find it more convenient to use the launch listener as describe in
http://download-uk.oracle.com/docs/html/B25947_01/web_complex003.htm#CEGDAHEA
because a setActionListener can only set one parameter at a time
Frank

How to stop "Create New CSS Rule" dialog box

Made the mistake of allowing an Apple tech talk me into an OS X "Install in place". He assured me that all application settings would remain the same as before.
Now, when holding down the "shift" key and typing a word in all caps (in Design View), the "Create new CSS Rule" dialog box pops up and writes:
<span style="font-size: 14px; margin-center: 1px; text-align: left; font-weight: bold; margin-bottom: 6px; padding-bottom: 0px; line-height: 1.3em; margin-top: 3px; font-family: Arial, Helvetica, sans-serif;"><font color="#006666">TEXT</font>
I am trying to find the setting in preferences to disable this, and since the behavior started after OS X "install in place", something must have changed. I just want to type in design view and not have to deal with Dreamweaver overriding what I'm doing.

I am attempting to type some text in "design", not "code" view. I want the text to be caps. I hold down the shift key, type the first letter, and immediately the "New CSS Rule" dialog box pops up. I cancel, but the code...
<span style="font-size: 14px; margin-center: 1px; text-align: left; font-weight: bold; margin-bottom: 6px; padding-bottom: 0px; line-height: 1.3em; margin-top: 3px; font-family: Arial, Helvetica, sans-serif;"><font color="#006666">TEXT</font>
...is created anyway.I just want to type a word into an existing div with no changes or dialog boxes or any input from Dreamweaver. I was able to do that before, and cannot do it now. There must be some setting that I am missing in preferences.

Confirmation Pop up dialog box

Hi All,
I want a pop up dialog box to be open on click of my create button asking "whether you want to submit the page"
Need help
Regards

Hi Trent
I have a create button. On the button optional URL target section, changes the Target as URL and the URL Target as
javascript:apex.confirm('Are you sure you want to submit?', 'CREATE');
I tried with this even
javascript:apex.confirm('Are you sure you want to submit?', 'SUBMIT');
But in both the cases the funtion is not calling.
Regards

Please help!! How to communicate between applet and pop up dialog box

Hi friend,
I have done a AWT pop up dialog box from Applet. In this pop up dialog box, I want get user name, and display on an Applet, anyone can tell me how to do? Thanks a lot!!!!
Alva

You need to create two methods in your applet, getName and setName as well as a name field.
private name = "";
public void setName(String n)
    name = n;
public void getName()
    return name;
}The various constructor methods for Dialog already take the owner of the Dialog (your applet) as a parameter, so in your applet's ActionEvent handler, all you have to do is call
    name = textName.getText().trim();
    owner.setName(name);Yes, it's that easy.

How to create a custom file dialog box/vi (win)??

Hello,
I'd like to create a custom file dialog box to handle the reading of my tdms files. Basicly I want to extend the existing file select dialog box with a graphical preview of the data in the selected file. I know I can create all the logic for file selection by hand and use a list box to display the filelist, but I would rather prefer to somehow use the existing windows controls. So is it possible to get the windows file selector on the front panel of a vi and react to the user selection? If so, is there any example available on how to do this? Any other options? I'm using labview 8.2
thanks for your input!
klaus

Klaus,
I wouldn't know that Microsoft provides access to the controls that Explorer and file dialog consist of.
There might be a different and more powerful solution though. The
WINDOWS Explorer / file dialog have a plugin API that allows you to
associate your own application for thumbnail creation with a particular
file extension. That way, TDMS thumbnails will show in any instance of
Explorer and
File Dialog without you having to make your own dialog. Basically, you
would need to compile the VI that creates the thumbnail into a
LabVIEW-built DLL and then wrap this DLL with some C++ boilerplate code
that Microsoft provides. You might want to have a look at the bottom of
this article to get an idea of how the whole thing works:
http://msdn.microsoft.com/msdnmag/issues/0600/w2kui2/default.aspx.
Hope that helps,
Herbert

Photoshop CS5 pop-ups (Dialog boxes) will not stay / stick in place

My pop-up / dialog boxes have always opened in the same place as I had placed them from the previous time I had used them. All of a sudden they will no longer stick / stay, they open in the center of the page.
For example when I first open PS and I click Ctrl > C for Brightness / Contrast the box will open in the center of the page. If I move it to the side (so its not in the working area) it should open in that spot the next time I use it.
But now it will always open in the center of the page regardless of where I have placed it before. Very annoying it have to move the dialog boxes all the time.

What OS are you running?
I know of no way Windows can cause that, but I don't know about OS X.
If you can't find a direct solution, it might be a case where a complete Photoshop preferences reset to defaults could help... Press and hold Control - Shift - Alt simultaneously (or Command - Shift - Option if on a Mac) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
-Noel

How to create a non hiding dialog box in swing

Hi there,
I want to create a non hiding Dialog box similar to MS Word Find/Replace dialog.
The Dialog should not hide when the focus is lost. Instead it should become inactive & should remain on the top.
Could someone please let me know how to create such a dialog in Swing?
You help is highly appreciated.
Thanks
Rakesh Nagar
[email protected]

have a look at -
http://forum.java.sun.com/thread.jsp?thread=327331&forum=57&message=1331793
ManishRaje.

Creating a "Pop Up" Window/Box in Sharepoint 2010

Hi,
I have a CEWP with several image buttons in it. When a user clicks on the images, a "pop up" window should appear which will have several different links for the user to choose from. So when the user selects the the link he/she wants to go to,
the user will then be directed towards that page/list/form.
How can i create a "pop up" window/box for the 1st requirement?
Any assistance would be appreciated.
Thanks, Aarti

Hi ,
Pls check if it can helps you
http://social.technet.microsoft.com/Forums/office/en-US/a2fec044-669f-45a2-b979-7ec324831a8b/how-to-create-a-popup-message-box-in-sharepoint-2013-?forum=sharepointdevelopment
http://social.technet.microsoft.com/Forums/office/en-US/9b5a0fa5-0c09-4753-b276-8e8e42c21542/create-pop-up-window-from-a-listview-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

Move an application "pop-up" (dialog box) with keyboard possible?

Is there a way to move an application's pop up (dialog box) with a keyboard command/shortcut? I had a situation where I was not connected to my 2nd monitor and an application popup box was opening on that 2nd (*not connected*) monitor.
I hate to say this; but on a PeeCee, a user can move a window via the keyboard. Is this possible on a Mac? Thanks!

no, it's not possible on a mac. if the popup open on the other monitor connect the second monitor and move the popup with a mouse. it should open on the main monitor form now on.
If you don't have a second monitor at all do the following.
1) goto System Prefs - universal access - enable access for assistive devices.
Paste the following into Script Editor and press run. This will move all offscreen windows currently open on the second monitor to the main screen.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 335px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
–– Example list of processes to ignore: {"xGestures"} or {"xGestures", "OtherApp", ...}
property processesToIgnore : {}
–– Get the size of the Display(s), only useful if there is one display
–– otherwise it will grab the total size of both displays
tell application "Finder"
set _b to bounds of window of desktop
set screen_width to item 3 of _b
set screen_height to item 4 of _b
end tell
tell application "System Events"
set allProcesses to application processes
set _results to ""
repeat with i from 1 to count allProcesses
set doIt to 1
repeat with z from 1 to count processesToIgnore
if process i = process (item z of processesToIgnore) then
set doIt to 0
end if
end repeat
if doIt = 1 then
tell process i
repeat with x from 1 to (count windows)
set winPos to position of window x
set _x to item 1 of winPos
set _y to item 2 of winPos
if (_x < 0 or _y < 0 or _x > screen_width or _y > screen_height) then
set position of window x to {0, 22}
end if
end repeat
end tell
end if
end repeat
end tell
</pre>

BDC for pop up dialog box.....

Hi Experts,
I need urgent help in BDC.
I want to handle BDC for the pop up dialog box.
Please help.

hi
can u he a bit clear

The pop-up dialog box, such as on Facebook, is truncated. It chops off the command buttons.

The pop-up dialog boxes, such as those on Facebook, are truncated. The boxes are 1/2 of normal size with the bottom 1/2 gone, including the command buttons, making it useless. Since yesterday evening, ALL dialog boxes on Facebook and Zynga are affected. I can't post anything from the pop-up boxes.
== This happened ==
Every time Firefox opened
== yesterday evening

Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

Printer Pop-up Dialog box

Hi
I encounter the printer Pop-up Dialog Box appear upon a
PrintJob is sent.
Is there a way to ignore or escape this pop up box?
Regards

We have currently upgraded 3 instances and it is happening in all 3 on all PC's. Appears that Oracle has it's own pop-up printer window it uses when printing from the PC instead of using the standard one. I imagine it is slow because of it being java. I'd open an SR but they will just say to update to today's version of java. We can't test in other browsers since IE8 is our standard company wide. I haven't got any hits searching MOS or Google on this so was just wondering if others are seeing the same thing. BTW - Our 11i instances work fine and load quick even on the first print but then 11i is using the PC's standard print pop-up window and not a java based one from the applications.
FYI - Fuound Bug 9202075 which seems to be the same issue except that we are on java 1.6.07. I have opened an SR.
Edited by: user649511 on May 20, 2011 7:18 AM

Best Way to Pop-Up Dialog Box Based on Form Data

Hi,
I'm using InfoPath 2010 to create a submission form in SharePoint 2010. During the form submission process I'd like to pop up a dialog box if the difference between today's date and the service request date (which is provided by the user) is less than
7 days. The user only has to acknowledge the dialog box. What is the best way to accomplish this?
Thanks,
Kevin

Hi,
What is the kind of your form : InfoPath (with InfoPath client on the machine) or InfoPath Form Services (web browser)?
Is this is a an InfoPath form, you can add an action on a button of type "Show message". You can add too a condition on this.
If you use InfoPath Form Services, there is two solution:
- Use managed code to call an alert javascript where you respect your condition,
- Create a new InfoPath View with the message and add an action "swith view" when you click on the button if you respect your condition.
Hope this help.
HI! Could you clarify please, how the 'Switch view' action could be called? I don't see such an option within Rules setup at Infopath 2010.

Create shape pop-up dialog box

Similar Messages

Maybe you are looking for