Create shortcut and run BI Frontend tools without Backend installation

I have new machine, I want to install BI 7.0 frontend only. Is it possible to run BI frontend (Bex Analyser, WAD, Web Analyser) without installing Backend. Using start menu, I am trying to create shortcut for BI front end tools on the desktop. which is asking for system information. but it doesn't give any popup for to enter system information. Where and How to enter system information ?

I am not sure if i get your qustion properly,when you say Back end ,you mean BW system??
You need BW system some where on this planet for your front end to work,its not imperative to have BW box on to your desktop.
Front end-Bex talks to BW and for that BW needs to be installed somewhere ,you can connect to BW box from anywhere with front end using local network where the BW system is installed or remote access or portal.
Hope it Helps
Chetan
@CP..

Similar Messages

  • How to deploy and run  EJB in eclipse without XDoclet

    Hi Friends
    I am new in j2ee.In my academic project i want to do some ejb programming.
    For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
    I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
    If u have saple code or useful link regarding this please send it as soon as possible.
    Thanks in advance
    How to deploy and run EJB in eclipse without XDoclet

    HI Welcome to J2ee...
    I am also new to this...But i ll share my ideas with you...
    In EJB 3.0 No need of any Deployment Descriptors....
    And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
    XDoclet is not mandatory...
    Gopal V

  • Is it possible to convert Java to EXE and run this EXE file without any JRE

    hello friends
    I have GCC/GCJ for windows but dont know how to work with it... it creates file with .o extension but i m not able to create .exe from that... i installed mingw for that also .. unsuccessful ...
    tell me the solution for it... i want to generate machine dependent exe from java file...on the web i ve seen that GCC/GCJ is used on linux platform..not cleared properly..
    Again i m writing my question
    Is it possible to convert Java to EXE and run this EXE file without any JRE if yes then how... tell me the procedure to do that...

    Vipul wrote:
    Its software now hardware .... some times u need these things ...anyway do u ve solution for my questionSo what? By creating a native executable you are restricting the program to the OS for which that native executable was made, just like removing the engine from a car restricts driving to downhill only. So like the I said, the principle remains the same, "Why would you want to?"
    I am asking you, truthfully, why do you feel the need to negate the largest advantage of using Java by creating a native executable from it?
    What is your rationale?
    I can pretty much guarantee there is a much better way of achieving your wish without "removing the engine".

  • Create PDF and run action does not actually run the action after producing the pdf from word

    When I select "Create PDF and Run Action" in word it does not actually run the action in Acrobat it just sets the tool, why?

    Hi Amerispec,
    Thank you for posting on the forums, Please explain the workflow steps along with the version of the Adobe Acrobat and OS you are working on.
    thanks,
    Vikrantt Singh

  • How to install and run USB device application without NI-VISA environment?

    Hi everyone:
          I develop a LabWindows/CVI8.5 application that uses a driver for a USB device created using the NI-VISA 4.6.2. The application is ok when the NI-VISA  environment is installed in PC. But the  NI-VISA 4.6.2 is too big(326M).  Can be the USB device successfully installed in non-development machine without NI-VISA 4.6.2?  Just need some files, such as INF, NiViUsbK.sys and ni-visa32.dll, the device will be installed and run.   If the way is feasible, please tell me how to do. Which files are necessary to the device is installed in non-development machine without NI-VISA 4.6.2 environment? It is so big, I need a minimum NI-VISA system.
          I need your help.

    Personally I use the open source LibUSB. It links without difficulty with
    CVI. And it works both on Linux and Windows, which is a big plus. Haven't
    touched it in 2 years though.
    Guillaume Dargaud
    http://www.gdargaud.net/

  • How to create folder and items in content area without edit folder option

    Hello!!
    I would like to create something to users can create and insert folders and items in content area without using the edit folder option.They would have a form to include the name of the file and the name.i would like to do this for the end users can insert files more easily. Can i do this? Anyone can help me ??
    Thanks in advance!!!
    null

    The wwsbr_api and wwsbr_search_api packages are included in the current PDK, but won't be supported until 3.0.8 is release, later this month.
    Regards,
    Jerry
    null

  • Create shortcut and add application to Dock after install

    Hello everybody, I've developped a Qt application with Xcode. It works correctly and I've created a setup that installs the application and other files. But I've not able to create a shotcut on the desktop nether to add my application to finder by default. Also, I want to give it an specific icon.
    Can anyone help me to all this :
    1) Create a shortcut of the application after install
    2) Add the application to the Finder and Dock
    3) Give to my application a specific icon
    I'm using Xcode.
    Thank you very much. Best regards.

    HI
    i have developed small application on iphone simulator,i want to create setup file to install how u have created installer please send me instruction or document to create the set up file thanks in advance
    my mail -id: [email protected]

  • Cannot Create, open and run task in NI MAX

    Using the NI MAX is very perplexing to me.
    I have been using it for a lone time and I had no problems in my my PC
    Till then I installed NI MAX and NI DAQmx in another production PC.
    In it, I could not open  or run the tasks which I had imported.
    Worse still I could not create a new task.
    What could be the problem?
    I had used the same versions for both PCs.
    When there are errors, I saw that said it is standalone program I am puzzled. Is that because the prodcution PC does not have Labview Development?
    It cannot be.
    Pls advise
    Clement

    Ok Here are snap on clips
    Here I cannot create  a new task or I do not see a similiar like this above.
    Here are errors when I tried to open the device's  test panels.
     Pls advise
     Thanks in advance

  • Why does the latest upgrade to firefox run and run on my MAC without ever loading

    I get a message saying update Firefox now. I hit the enter and the Firefox update runs, last time I tried I went to another page to keep working and the update was running for over 30 minutes. The about Firefox page shows issue 33

    Hello Norrsken, please try to download and install firefox. Do the next steps:
    1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html (full installer)
    2. '''Trash''' the current Firefox application to do a clean install.
    3. Install the version that you have downloaded.
    Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
    see also: [https://support.mozilla.org/kb/how-download-and-install-firefox-mac Installing Firefox on Mac]
    thank you

  • HT5628 Is there any possiblity of installing and running only windows 8 without running boot camp stuff in the background?

    I want to use my mac mini as a stand alone hardawre for windows 8. If it is possible please help with what to do...

    Backup / clone Mac OS X to another drive for safe keeping.
    Boot from Windows 8 DVD and just format the entire drive, make sure to have everything else not needed unpugged.
    Nothing hard.
    What is Boot Camp 5?
    Boot Camp 5 is not a release of OS X software. Rather, it is a release of the Windows Support Software (drivers). You will need to use this software on your Mac with Windows 8 or Windows 7. For more information on Boot Camp 5, see thttp://support.apple.com/kb/HT5639
    Which Macs support Windows 8?
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Mid 2010 or newer)
    Mac Pro (Early 2009 or newer)
    Mac Mini (Mid 2011 or newer)
    iMac (27-inch, Mid 2010 or Mid 2011 or newer)
    For more information, see this article.
    What are the System Requirements for Windows 8?
    Please see this article.
    How can I install Windows 8 on an eligible computer?
    Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.

  • After downloading, when I try and run the program to initiate the installation, I get an error message that says 'File is Corrupt'. The only other message is in the title bar of the message box and it states 'Extraction Failed'. Thanks for any assistance.

    I am running Windows 7 on a Dell Laptop. Internet Explorer has been running wierd the last few days so I suspect there may be other problems.

    Hi,
    The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
    You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
    DNG  Converter 8.8
    Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
    Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
    Useful Tutorial
    http://www.youtube.com/watch?v=0bqGovpuihw
    Brian

  • Creating shortcuts to reports

    Post Author: hd1
    CA Forum: Publishing
    Hello,
    I am in the process of trying to create shortcuts to our crystal reports.  Is there some kind of trick to this?  I am able to create a shortcut but I am unable to access it.  You can see the report name that says "Shortcut to <report name>" all in the black letters.  You cannot click anything but the actions and descriptions arrow, and once you click that, you cannot click any of the links it shows.  I think this is a rights issue because my standard network account will access any shortcuts I have created anywhere.  My account does have Crystal_Administrator attached to the rights though.  Here is what I have done.
    Created a shortcut a report from HR to Timekeepers
    Clicked on created shortcut and added group "Timekeepers" with inherited rights.
    Nothing happens though.

    Post Author: mk1
    CA Forum: Publishing
    What's the status of your "Cleanup instance..." toggle?  I was having this problem, too  and it seemed that, when I turned this off, there was an instance there for the shortcut to point to, and it worked.  Apparently, if you delete the instance, the shortcut goes nowhere...

  • Creating documents and spreadsheets

    Is there a way to create documents and spreadsheets on MacBook Pro without downloading something like Open Office?

    You can use the built-in TextEdit for creating "simple" text documents but for spreadsheets there is no such app.
    The free OpenOffice; LibreOffice or NeoOffice or the commercial Apples Pages and Numbers or Microsoft Office for Mac are the ways to go.
    Stefan

  • How to format HDD and reinstall OS on macbook pro mid 2010 without the installation DVD.

    After updated the OS with MAVERICKS becomme my macbook very slow. So I want to format the HDD and reinstall the OS but without the installation DVD - (lost).
    Could some one advise me how to proceed? Thank you

    Welcome to Apple Support Communities
    OS X Lion and newer include OS X Recovery to reinstall Mac OS X without the need of a DVD. See > http://support.apple.com/kb/HT4718
    First of all, copy your most important files to an external drive, or make a backup of your files. Then, hold Command and R keys while your Mac is starting, open Disk Utility and erase Macintosh HD by choosing it in the Disk Utility's sidebar and going to Erase tab.
    Finally, close Disk Utility and reinstall OS X

  • Need help resetting or changing my admin username and password without the installation disc

    I accidentally clicked on the check box that is located in system preferences in accounts that says "Allow user to administer this computer" and unchecked it. So the account that I set up the user name and password to is not the administer anymore and I don't know what account is. So now every time I want to make changes to anything and click on the lock button it will not accept my username and password. So how do I reset my username and password for the administer without the installation disc and without losing any files or folders????
    Message was edited by: ashkonnor8808

    Those changes require an installation DVD. However, see:
    Forgot Your Account Password
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself

Maybe you are looking for