Create Slideshow Display sequence property doesn't work

Create Slideshow Display sequence property doesn't work,
I have selcted random but the slideshow always plays in order. I searched the scripts for any logi related to this and other properties set, but cannot find any refernce to any of these propoerties:
transType='Random' transTime='1' firstImage='1' dispSequence='1'>
How can I make the slideshow start  with a random image each time?
thanks
s

Hello,
I am back on this question, about how to get the non-flash version of the Creatr Slideshow v1.6 to display the images in a random sequence. Can anyone point me in the right direction, please?
thanks
juno

Similar Messages

  • In day 4, video # Creating "pages" with Flex states doesn't work

    i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem

    Hi,
         I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA

  • Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

    Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Create Sequence command doesn't work on my MSSMS-Microsoft SQL Server Management Studio 11.0.2100.60

    Hi!
     For some reason Create Sequence command doens't work on my Management Studtio version mentioned above.
     Please advise, thanks

    What counts is not the SQL Server Management Studio level, but the release level of the SQL Server you are connected to and the the compatibility of the database you are connected to.  Run
    Select name, ServerProperty('ProductVersion') As ProductVersion, compatibility_level
    From master.sys.databases
    Where database_id = DB_ID()
    Product Version should show as 11.<something> or higher.  compatability_level should show as 110 or higher.  If either of those values are lower, then that is your problem.
    Tom

  • 27" display and late '09 MBP 13" - Display software update **doesn't work**

    Hello All,
    My shiny new 27" LED cinema display arrived today. The display is stunning, but when I downloaded and installed the "LED Cinema Display Software Update 1.0" (http://support.apple.com/kb/DL1107) on my mid-'09 MBP 13" it doesn't work!!
    The installation completes successfully, but after rebooting and checking system preferences, I don't get the brightness slider etc nor the option to use the built-in speakers in the display.
    Please advise if you have any advice or thoughts on the matter.
    Many thanks,
    Rob

    Apple got hold of me and we went through some trouble-shooting steps. Turns out that the USB connector, although fully plugged in, was somehow not seated correctly and was thus not recognizing the display and speaker etc.
    Happily resolved!

  • QuickTime movies cannot display properly, refresh doesn't work propely for html files on hard disk, opening a new tab doesn't work

    Hi!
    I have tried Firefox V4 (but have since reused V3.6.16). The following problems were found:
    a. Cannot display the controls used for QuickTime movies.
    b. The refresh button doesn't function at all if the html files reside on the hard disk. I do this because I need to test the appearance of the web page before uploading to the server.
    This problem also exists for v3.6.14 to v3.6.16
    c. When opening a new tab, it doesn't work. Instead, it will open another instance of the browser. By right, it has to open the web page on the same instance of the browser.
    This is my feedback.
    Thanks!!!!! :)

    I had some advice to try recording QT audio and adding to the slide.  Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
    The problem Keynote has is that the sound and image content are not locked together which causes out of sync errors. This is why many users choose video editing applications when using sound in the presentations, as they have both image and audio tracks to sync sound properly together.
    Start a new presentation to remove the previous sound recording, Keynote is holding onto the other sound files.
    Add the graphic items to each slide and one sound file to each slide for the voice over
    1 - In Inspector > Transitions;  use start transitions automatically and set each transitions delay to the duration of the individual sound file.
    2 - In QT export, set Fixed Timing and delete the value in the duration box, QT will then use the custom timings for each individual slide.
    This procedure does work exactly as needed, Iv used this for nearly 6 years using 4 different versions of Keynote.

  • Can't create Smart Collection, Save-Button doesn't work

    i have the Problem  that i can't create Smart Collection, the Save-Button doesn't work, the Smart-Collection Window stays open and nothing happens when i click the "save" button!
    i use CC with a new installed W8 and all is up-to-date.
    Its a strange thing. Please Help me.

    Just to clarify, Photoshop CC has not been released yet.  It will come out on June 17.
    What you have now is Photoshop 13.x as per the subscription model (»Abo«) and it's called Photoshop CS6.  When Photoshop 14.x is released on June 17, then it will be called "CC".
    It's not clear—at least to me—which images, if any, you have selected in Bridge when you hit the »Speichern« (Save) button.
    Remember that a Collection is nothing more than a saved search, i.e. a saved collection of selected search results (hits).
    Could you elaborate on what it is you want to save as a collection? 
    Incidentally, the Adobe Bridge forum is here:
    http://forums.adobe.com/community/bridge?view=discussions

  • "Fit slideshow to music" feature doesn't work

    I've selected "Fit sideshow to music" on a slideshow I've made. Using a song imported from my iTunes library. Ken Burns effect is switched on.
    But the feature doesn't work. The song ends but there are still more slides to show.
    Isn't the idea that the computer will speed up the pix so they end just as the music ends?
    Anyone know how to fix this?
    Thanks.
    Mac Mini   Mac OS X (10.4.3)  

    Try this solution.

  • WMI Process Call Create gives good feedback but doesn't work

    I'm developing a VB.NET application able to control remotely other computers, send commands and retrieve information
    Here's the code:
    Dim connOptions As ConnectionOptions = New ConnectionOptions()
    connOptions.Impersonation = System.Management.ImpersonationLevel.Impersonate
    connOptions.Authentication = System.Management.AuthenticationLevel.Packet
    connOptions.EnablePrivileges = True
    Dim theScope As ManagementScope = New ManagementScope("\\" & IPAddressTextBox.Text & "\root\cimv2", connOptions)
    Dim theClass As New ManagementClass(theScope, New ManagementPath("Win32_Process"), New ObjectGetOptions())
    Dim iPe As ManagementBaseObject = theClass.GetMethodParameters("Create")
    iPe("CommandLine") = CommandLineTextBox.Text
    theClass.InvokeMethod("Create", iPe, Nothing)
    The problem is that even if it gives a "0" ReturnValue, which means the operation is successful, the process doesn't actually starts on the remote machine (which is in the local network)  
    In reality, the process actually starts but doesn't show up, in the Task Manager of the remote machine, is visible ONLY under "Processes" -> "Show processes from all users", at this point, i can see the process i created from the other
    main machine, the process "User Name" is the main computer username, and not the remote machine one, is that the problem?
    I'm using Impersonate as the impersonation level and Packet as the Authentication level (as you can see from the code), is this what i'm doing wrong?
    also it doesn't work with WMIC with "wmic /NODE:IPADDRESS process call create COMMANDLINE"
    Thanks you for your time.
     

    It doesn't matter whether you use VB, VBScript, or PowerShell. If you use any of these languages to create a process on a remote machine using WMI, the new process is always going to run in the background. You cannot make it run as a visible process. This
    is by design and is explicitly stated in the Remarks section of the method's documentation:
    http://msdn.microsoft.com/en-us/library/aa389388.aspx
    For security reasons the Win32_Process.Create method cannot be used to start an interactive process remotely.
    -- Bill Stewart [Bill_Stewart]

  • Why my new Mac mini  DVI dual link mini display port adapter doesn't work  with my 30"display (LG W3000H)?

    Hello There
    Can any of you advise on the below? Tried to connect Mac mini with a 30" display through a DVI dual link mini display port adapter. For the first try Mac mini go connected to the display, then i've chosen the highest resolution (2560x1600, native) and right at that moment they got disconected. Since then the display stays black. What can be the issue, is it possible DVI dual link mini display port adapter is not compatible with 30"display (LG W3000H)? It works with DVI male-male cable plus DVI HDMI adapter as long as the resolution stays under 1280x800. Any idea is much appreciated.
    Thank you, Vera

    Hi,
    I can report that my Mac Mini Intel Duo connected instantly and without even having to set it up (on the first try) with my 1366x768 native resolution DELL 50" Plasma Display. It's so beautiful that I just want to stand there and fondle my HDTV as I drool haplessly like Homer Simpson with a doughnut in his mouth. Seriously, no problems.... guess I bought the right cable (ebay).
    Before you buy a Duo, make sure you're aware of the airport and bluetooth issues that so many (maybe everyone who tries to use them together) are having. It seems that bluetooth interferes with airport, or maybe the other way around. Anyway, it's messed up. Also, Airport reception is generally VERY poor with the new Intel Mac Mini.
    Despite these things, I still love mine (I now have 2 base stations and an airport express for my powerhouse wireless needs, and an external DLink bluetooth-2-USB dongle solved the bluetooth/airport issues... in my case).
    FWIW,
    awk
    667-MHz Ti PowerBook G4.   Mac OS X (10.3.9)  

  • Create AAC from Wav file doesn't work

    I've converted many WAV files to AAC and it worked fine.  The last few times I've tried it it isn't working.  I hear the bleep which I think indicates it's been converted but I can't find it anywhere so assume it didn't happen. 
    I have Windows XP.  I am running iTunes  10.3.1.55
    Any ideas would be appreciated.
    Thanks,
    Ginny

    Hello,
    thank you for your Help.
    But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
    I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
    And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
    bye & thanks again
    amin
    Message Edited by aminat on 09-30-2009 03:28 AM

  • TabSet's selected property doesn't work dynamically

    I have a tab set with three tabs. Suppose I'm on the third tab, click a button on the tab and move to another page. When I'm done with that page I want to go back to the previous page (with the tab set) and display the page with the third tab showing.
    First, I tried saving the tab set's selected property in a session bean. In the page's prerender method, I retrieve the selected property from the session bean and call the tab set's setSelected method. This doesn't appear to work because the first tab is always displayed. (I ran this in the debugger to make sure the tab ID was persisted and retrieved correctly.)
    Second, I tried saving the tab set's state in a session bean. In the page's prerender method I retrieve the tab set's state and restore it with tab set's restoreState method. Again, this didn't work. (As before I verified that the state was indeed being saved and restored.)
    Any suggestions on how I can force a particular tab to be displayed when the page is rendered?

    Hi claudioaragao
    it depends on which trigger are u using it ; if using Multi-Records Block Pls Try...
    WHEN-NEW-RECORD-INSTANCE it will work just fine...! :)
    u should also mention forms version & on which trigger r u trying to use it...?!
    And according to ur condition in the IF Statment ...
    SET_ITEM_PROPERTY ('detail_block.id' ,ENABLED ,PROPERTY_FALSE);
    SET_ITEM_PROPERTY ('detail_block.id' ,NAVIGABLE,PROPERTY_FALSE);
    SET_ITEM_PROPERTY ('detail_block.id' ,UPDATE_ALLOWED,PROPERTY_FALSE);
    SET_ITEM_PROPERTY ('detail_block.id' ,INSERT_ALLOWED,PROPERTY_FALSE);Hope this helps...
    Regards,
    Abdetu.....
    Edited by: Abdetu on Jan 27, 2011 6:59 AM

  • Mini Display port HDMI doesn't work? How to fix it it doesn't show neither video nor audio

    Hi,
    I bought two days ago a Rocketfish mini DisplayPort to HDMI but I still cannot watch anything in my tv. I've tried everything. I plugged the HDMI cable in differents ports of my tv, I plugged it in differents TV of my house but nothing happened. I dont know what the problem is : the TV's, my MacBook Pro or the adapter. I went to system preferences > Displays but the it doesn't recognize the TV and in the other hand the TV doesn't recognize any signal. Help me plase to solve this problem.
    Thank you

    I dont think is the cable because it works with my playstation 3. Does the size of the tv have any relation to the problem?
    No, the size of the TV makes no difference at all.
    I would try to exchange the adapter.

  • Can't Create an Account because password doesn't work

    Hello,
    Pretty new to the forum. I have just opened an iChat account and I can't get it to work. I am able to create an account name and then I type in a password. Then the screen comes up and the computer asks me to type in my password....I do and then it says it doesn't recognize the password. I then look back at my file and the password in covered up with astericks (*), but the word length is different than what I typed. I have tried correcting the password numerous times and then repeatedly logging on and creating different accounts....but I haven't been able to log on yet. Please help me if you can. This is very frustrating.
    -Ben

    HI Ben,
    If you are creating a @mac account the password needs to be 16 characters or less to work with iChat.
    This is because the AIM servers only allow this number of characters for their passwords and iChat uses the AIM servers for iChat.
    The * that appear after you confirm the password show a default number of *s (12 I think) no matter how long or short your password is.
    11:51 PM Saturday; May 13, 2006

  • Display-condition="first" doesn't work

    Hi,
    I'm trying to use the 'display-condition' attribute of the xdofo:inline-total element to get some boiler plate to appear on the first page only, and some other boiler-plate to appear on all subsequent pages (display-condition="first" and display-condition="exceptfirst") as detailed on page 2-78 of the 5.6.3 user guide.
    (This is not something that can appear in the header/footer, so we can't use 'different first page').
    If I don't specify a display condition then my boiler plate is displayed (although only if I add this as a string within the element, and the variable is not displayed correctly). But if I add the display-condition="first" then the element is not displayed at all.
    I've tried this with the 5.6.2 desktop previewer and with 5.6.3 within Oracle Applications. The results are pretty much the same.
    I guess I have two questions:
    1.) Is this the right way to do what I'm trying to do? (We need 'Assessment Information to be shown at the head of a table on page 1, and 'Assessment Information Continued' to be shown at the top of the table on all subsequent pages, and as this is a batch print job, we need the pageing to restart for each new main group)
    2.) If this is the right way to do it, can anyone help me get it working?
    I can post a small example xml and rtf if it helps.
    Thanks for any suggestions,
    Ben

    To test this further I created a new rtf template and xml file which make the problem quite clear I think.
    I've created 5 new items in the template.
    Each one of them uses a different printing condition as specified in the user guide, from which I quote:
    • first - the contents appear only on the first page
    • last - the contents appear only on the last page
    • exceptfirst - contents appear on all pages except first
    • exceptlast - contents appear on all pages except last
    • everytime- (default) contents appear on every page
    When you preview the report, what happens is that:
    • first prints on every page except the last
    • last is never printed
    • exceptfirst prints on every page except the last
    • except last is never printed
    • everytime prints on every page except the last
    None of these behaves as descibed in the manual, and nothing is ever printed on the last page.
    Anyone got any ideas? Someone must be using this functionality succesfully...
    Thanks,
    Ben

Maybe you are looking for