Create slideshow elements 11

Is there a way to make the pictures on the timeline larger , also the arrow to move the timeline .  i have Elements 11

The question I have is about the  storyboard, When I add pictures to the
storyboard to make a slideshow,  they are so small they are hard to see.   Can I
make the storyboard  bigger? In windows movie maker I can drag it and make it
bigger. Thank you for your help.
fatstuff2

Similar Messages

  • Cannot create slideshow in Premiere Elements 8

    I just installed and am trying to use Premiere Elements 8. I have been racking my brain for the last two hours trying to figure out how to create a slide show.  I do not have a create button anywhere.  I jumped from Elements 1.0 to 8.  I am ready to return 8 and go back to 1 if I cannot figure this out.
    Where do I find the slideshow dialog box?
    Can someone please help?????
    Thanks.

    Oh come on, Eric! You're not really going to return the program just because you couldn't figure out how to use it, are you?
    I"m just teasing you. The program can be a bit intimidating at first. That's why I spend most of my day showing people how to use it.
    Actually, there are at least four ways to build a slideshow in Premiere Elements. I show you how to do them all in my book, "The Muvipix.com Guide to Photoshop Elements and Premiere Elements 8," if you're interested.It's available on Amazon.com and from the Muvipix store.
    I don know specifically what kind of slideshow you're trying to create, so I can't give you specific instructions.
    But first, before you bring any photos into Premiere Elements, be sure to resize them to 1000x750 pixels, per the FAQs to the right of this forum.
    http://forums.adobe.com/thread/431851?tstart=0
    Then use Get Media/From Files and Folders to get the photos into your Project panel (also under the Organize tab.)
    Once you've got all of your photos gathered in your Project media panel, select them all and right-click -- and select Create Slideshow.
    As I say, there are a number of other ways to do it, but this is the easiest. There is also an option for creating a slideshow in Themes and there's a slideshow creator built into the Organizer.
    But that should get you started.
    Meantime, why not check out my free Basic Training with Premiere Elements tutorials on the Muvipix site?

  • Purchased Premiere 13. Won't burn dvd of slideshow created in elements 12.

    I created a slideshow in Elements 12. Saved as WMV. Tried to burn DVD. Get message inviting me to try Premiere 13 trial. Have already purchased Premiere 13, but Elements 12 doesn't recognize that.
    Tried opening Premier 13, importing my WMV from file. Go to create DVD. After seeming to go through the entire burn, I get a message that says something is stopping the complete burn. Provides a link that takes me to a page not available. Is there a way to get my Elements 12 to link to Premiere 13? What else can I try?

    susanK
    If you have outputted your Elements Organizer 12 slideshow to obtain a wmv file saved to your computer hard drive, you should be
    able to import that into Premiere Elements 13 Editor with the Editor's Add Media/Files and Folders and edit and export accordingly.
    There is no integration between the Elements Organizer 12 Slideshow Editor and Premiere Elements 13/Elements Organizer 13.
    However, you can convert the 12 catalog in 13. But 13 will require you to convert the slideshow in that catalog to its new format which
    is significantly different from what you have used in 12.
    Have you updated 13 to 13.1 yet. If you have, sounds like the program is using a new 13.1 feature which leaves you with .iso image file
    if you hit burn to failure. You can take that .iso image file to DVD-VIDEO on DVD using a free program named ImgBurn.
    You can also use Publish+Share/Disc/DVD  burn to Folder (4.7 GB) to obtain a saved folder containing the VIDEO_TS Folder that you can
    get to DVD-VIDEO on DVD disc using the ImgBurn program.
    Things to check out
    http://www.afterdawn.com/guides/archive/burn_dvd_folder_imgburn.cfm
    Elements Organizer Help | Create slideshows
    Please review and consider and then we can decide what next.
    ATR

  • Premiere elements 11 on iMac, creating slideshow ?

    Creating slideshow w/transition & music in Premiere Elements 11, photos become very granny, what is happening? 

    I think I have the most recent version of Quicktime.  I downloaded it yesterday and then bought the Pro edition. 
    When I go to Share/Computer I have the following choices:
    Adobe Flash Video - use for posting on web pages
    NOEG - Use for playback on this computer or burning to DVD
    AVCHD - Use for exporting AVCHD
    QuickTime - Use for email and playback on Mac
    Image - use for exporting still image
    Audio - use for esporing audio
    Nothing equivilent to the PC choice of AVI - use for editing in a Premiere Elements project
    I have shared to QuickTime and the quality I get is not nearly as good as the AVI on the PC.  Nor is it as good as the mp4 file I get when I share in iMovie 10.  I just like to edit in Premiere Elements.  And I will ditch the iMac when I can and download everythig to the PC in the future.  Suggestions would be appreciated.

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

  • Can't find "Create Slideshow" dialog box.

    I have Premiere Elements 7, and am trying to create a slideshow.  The Help page refers to a "Create Slideshow" dialog box, but I don't see that anywhere.  I've looked through every menu, every icon, and tried right clicking on the photos that were dragged down to the timeline, but no slideshow option.
    I've done slideshows manually using PE7 before, but it's a big pain having to manually reset the duration of each slide, rather than changing the default somehow.
    Thanks!
    Bennett

    There are actually four different ways to build slideshows in Premiere Elements, and I show you how to do each in my books.
    But I think you're referring to the slideshow creator on the Project panel. To use it, select several stills or clips in the Project panel (by selecting as you hold down the Ctrl or Shift key) and right-click. This will open the panel I think you're looking for.

  • Audio problem when creating slideshows

    When creating slideshows in Adobe Photoshop Elements 9.0 I do not get any audio/music in the .pdf file.
    I can get audio in preview and if I create a .wmv file but not in the .pdf file.
    Why?
    I seen some discussions on the forum but no real answer.
    I have tried to add the document as a trusted document in the preferences.
    I have tried with Adobe reader 7.0, 9 and X. Nothing works.
    Note: My music is longer than the slideshow since I would like music during the whole slideshow. It is one musicfile.
    I run on a PC, Windows XP, servicepack 3.
    Is this a bug in Adobe Photoshop Elements??
    Some error by me?
    Or is there  a workaround?
    /Tor

    OK!
    Thank you!
    Seemed so strange since the Adobe Photoshop Album 2.0 was able to do this. Sad that this function disappearred. Is there another way to get music in the .pdf file?
    The .wmv file seem to distroy the picture resolution quite a lot. I get the impression that if I set the .pdf and .wmv output to same resolution the .wmv file gives pictures that seem to be done with a lower resolution (that the pictures get damaged in the transformation) . .....and as an extra disadvantage the file gets big.
    Do you have any suggestion for what you think is the best option for me to do a slideshow?
    Best regards
    /Tor

  • How can I create an element in the model node?

    Hi, Experts,
    I create a model node that name is containerNode in the contxt. Cadinility is: 1..n
    I write the code in the method:
      private String getDataForOutputTable( IWDNode wageTypePayslip, IWDNode containerNode ){
           String betrgSumStr = "";
         int index = 0;
         Vector containerVector = new Vector();
         int size = wageTypePayslip.size();
         IWDNodeElement element = containerNode.createElement();// The system report error when I run the application.
         BigDecimal betrgSum = new BigDecimal( 0 );
    I try to create a element in the containerNode, But the system report error when I run the application.
    java.lang.IllegalArgumentException: model object must not be null
         at com.sap.tc.webdynpro.progmodel.context.ModelNodeElement.<init>(ModelNodeElement.java:66)
         at besuretech.com.wdp.IPrivatePayDataDispView$IOContainerElement.<init>(IPrivatePayDataDispView.java:1537)
         at besuretech.com.wdp.IPrivatePayDataDispView$IContextNode.doCreateElement(IPrivatePayDataDispView.java:88)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.createElement(NodeInfo.java:884)
         at com.sap.tc.webdynpro.progmodel.context.Node.createElementInternal(Node.java:1351)
         at com.sap.tc.webdynpro.progmodel.context.Node.createElement(Node.java:1370)
         at besuretech.com.PayDataDispView.getDataForOutputTable(PayDataDispView.java:251)
         at besuretech.com.PayDataDispView.getAllData(PayDataDispView.java:196)
         at besuretech.com.PayDataDispView.onPlugPayListViewIn(PayDataDispView.java:154)
         at besuretech.com.wdp.InternalPayDataDispView.wdInvokeEventHandler(InternalPayDataDispView.java:391)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:881)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
    How can I create an element in the model node ?
    Best regards,
    tao

    Hi,
    You need to execute the model before creating the element.
    Regards
    Ayyapparaj

  • How to create UI element in VC

    Hi,
         I want to create UI element in VISUAL COMPOSER like text field, input field, button etc.How we can develop in VC iView?
    Thanks,
    Kundan

    Hi,
    Refer
    http://www.sdn.sap.com/irj/sdn/nw-vc;jsessionid=(J2EE3417200)ID1217882450DB11101197022981941087End?rid=/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
    Regards,
    Manivannan P

  • How to create dynamic elements in action of a view?

    hi all,
    I created 2 buttons dynamically in WdDoModifyView(). I created  action1, and parameter for that action i.e, id of type string.
    when i click on button1, some ui elements must be displayed.....
    can anyone tell me how to dynamically add UI elements in onAction() of view.....
    i wrote the following code to create & map dynamically in WdDoModifyView()........
    if(firstTime)
        IWDButton b1=(IWDButton)view.createElement(IWDButton.class,"button1");
        b1.setText("Button1");
        IWDButton b2=(IWDButton)view.createElement(IWDButton.class,"button2");
        b2.setText("Button2");
        IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
        tc.addChild(b1);
        tc.addChild(b2);
         IWDButton butt1 = (IWDButton)view.getElement("button1");
         IWDParameterMapping pm1a = butt1.mappingOfOnAction();
         pm1a.addParameter("id1","link1a");
         IWDButton butt2 = (IWDButton)view.getElement("button2");
         IWDParameterMapping pm1b = butt2.mappingOfOnAction();
         pm1b.addParameter("id1","link1b");
    after writing this..... in onAction().........of view... i wrote like this...
    if (id1.equals("link1a"))
    else{
    in the if & else condition, i have to create UI elements dynamically.
    when i am trying to create Ui elements dynamically, but i am unable to create dynamically here.
    pls give me suggestion how to proceed this
    regards,
    vila

    Hi Vila,
    Are you trying to create UI elements dynamically in the action? If yes then you won't be able to do so because you can only create UI elements dynamically in WDDoModifyView().
    Always WDDoModifyView() would be called after your action. So, you can handle it as you want in your WDDoModifyView() itself.
    But if you want that those elements should be created everytime when you fire an event then don't write it within if(firstTime) clause as this would be true only when WDDoModifyView() is called for the first time when the page intially loads.
    Regards,
    Murtuza

  • Error while Creating WBS element using BAPI 'BAPI_BUS2054_CREATE_MULTI'

    Hi Expert,
    I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner.
    CALL FUNCTION 'BAPI_PS_INITIALIZATION'
      CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
        EXPORTING
          i_project_definition = g_pdwbs
      TABLES
        it_wbs_element             = it_wbs_element
       et_return                  = it_return
      EXTENSIONIN                =
      EXTENSIONOUT               =
        CALL FUNCTION 'BAPI_PS_PRECOMMIT'
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    When I do so I am getting the below errors. Please suggest.
    "Individual check for creating the object WBS Element C-497082 required ".
    "Individual check for creating the object WBS Element C-497082-0001 required".
    Please suggest how to correct this error. 
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Edited by: Alvaro Tejada Galindo on Aug 18, 2008 5:25 PM

    I am getting the same error, but I cannot figure it out how to detect it and fix it.  Will you please share your solution?
    Thanks,

  • Error while creating WBS element.. regarding source structure

    I am creating a project and then a WBS element. Its a investment project. While creating WBS element XXX, it gives me error that "WBS element XXX: SOurce assignments for source structure A1 missing in Investment Profile ZZZZZ."
    What shall I check? what could be the reason?
    Thanks,
    A

    hi,
    In this IMG activity, you define the source structures used when settling and costing joint products.
    A source structure contains several source assignments, each of which contains the individual cost elements or cost element intervals to be settled using the same distribution rules
    Just consult with your CO Consultant...
    Venkatesh

  • Error while Creating cost element under category 90

    Dear Experts,
    I have some Balance Sheet related G/L account, which I have created as cost element through transaction KA01, system gives an info message saying its an BS related account, if I ignore that message and proceed further it creates a Cost element with category (system automatically picks the category and the field gets into gray mode) 90.
    We have created one more BS G/L account today and trying to create the cost element for the new G/L account, system is producing an error message:
    G/L account 3200220 is a balance sheet account
    Message no. KS036
    Field status group     R005     Material accounts is maintained
    Can some one guide me to rectify this error?
    Thanks in advance,
    Regards,
    Praveen

    Hi,
    The use of cost element category 90 is only provided                            
    in the following two cases (note Note 75980):                                                                               
    1. asset acquisitions and down payments which are                           
       assigned directly to a fixed asset or asset under construction can       
       be assigned to an account on internal orders or WBS elements             
       statistically.                                                                               
    2. cost elements of category 90 can also be created                         
       for material stock accounts to display material make-to-order stocks     
       on sales orders or customer projects.                                                                               
    If you G/L account does NOT correspond to the standard cases 1) or 2),      
    you can (on your own responsibility)                                        
    both deactivate the account assignment                                      
    check in the CO interface (message KI098) and when you create cost          
    elements (message KS036). Both checks are deactivated by maintaining        
    Transaction OBA5. Deactivate message KI098. Message KS036 cannot be         
    deactivated directly with Transaction OBA5 - rather, it is deactivated      
    indirectly when you deactivate message KI098.                               
    The message must be DE-ACTIVATED. Please do not set it to any other         
    type. Please proceed as follows:                                            
    Please call OBA5 in the production system - if not set to changeable        
    please do this in Your development system.                                  
    In OBA5 choose KI and in the detail screen add 098. 
    Then set the type of warning to "-".  
    Best regards,
    MLM

  • Cannot create target element /Invoice. Values missing in queue context.

    Hi Experts,
    I am working on Idoc to File scenario using SAP PI 7.1. In this scenario I am mapping Invoic02 Idoc with Invoice xsd. I am able to test the mapping in ESR with status as success.
    In ID Tools --> Test Configuration I used the same payload and tried testing the configuration step by step. while executing I am getting an error at Operation Mapping saying "Runtime exception occurred during application mapping com/sap/xi/tf/_MM_SRM_Hubwoo_Invoice_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /Invoice. Valuesmissing in queue context. Target XSD requires a v~"
    Even though the mapping is getting executed successfully in ESR, I am not able to fix this issue. Need your inputs in resolving the same.
    Regards,
    Saurabh
    Edited by: saurabh mathure on Oct 16, 2010 8:14 AM

    Hi ,
    issue"Can not create the target element   value missing the queue context'.
    reason for this issue:
    Target field expecting some value from sender field. so in testing your not getting  any data from source field  for this reason your getting that issue.
    Solution:
    In mapping use node function:Mapwith deafault between source and taget fileds.
    Then activate mapping . now excute the scenario it  will properly without that issue.
    Cheers,
    Meera

  • Prob in displaying the dynamically created ui elements on click of a button

    hi all
    i created 1 inputfield, 2 buttons & i wrote the following code in wddomodifyview() of view.
    IWDInputField inf1=(IWDInputField)view.createElement(IWDInputField.class,"inf1");
        inf1.bindValue("Student.name");
        IWDButton but1=(IWDButton)view.createElement(IWDButton.class,"button1");
        but1.setText("Button1");
        IWDButton but2=(IWDButton)view.createElement(IWDButton.class,"button2");
        but2.setText("Button2");
        IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("TransparentContainer");
         tc.addChild(inf1);
        tc.addChild(but1);
        tc.addChild(but2);
         IWDButton button1= (IWDButton) view.getElement("button1");
         IWDAction theAction=wdThis.wdCreateAction(IPrivateDynCompView.WDActionEventHandler.DISPLAY,"");
                        but1.setOnAction(theAction);
                             IWDParameterMapping bm1 = button1.mappingOfOnAction();
                             bm1.addParameter("id", "b1");
                   IWDButton button2= (IWDButton) view.getElement("button2");
                   IWDParameterMapping bm2 = button1.mappingOfOnAction();
                   bm1.addParameter("id", "b2");
    and i wrote the following code in onactiondisplay()
    if (id.equals("b1"))
         wdContext.currentStudentElement().setName("First Button Clicked");
         else
         wdContext.currentStudentElement().setName("Second Button Clicked");
    when i run the application, the following error is displaying.....
    The initial exception that caused the request to fail, was:
       com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: View: Cannot add element with duplicate ID "inf1" of type com.sap.tc.webdynpro.clientserver.uielib.standard.impl.InputField
        at com.sap.tc.webdynpro.progmodel.view.View.addElement(View.java:481)
        at com.sap.tc.webdynpro.progmodel.view.ViewElement.<init>(ViewElement.java:43)
        at com.sap.tc.webdynpro.progmodel.view.UIElement.<init>(UIElement.java:188)
        at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.AbstractInputField.<init>(AbstractInputField.java:143)
        at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.InputField.<init>(InputField.java:71)
        ... 35 more
    com.sap.tc.webdynpro.services.exceptions.WDCreationFailedException: Cannot create view element implementation com.sap.tc.webdynpro.clientserver.uielib.standard.impl.InputField
         at com.sap.tc.webdynpro.progmodel.view.ViewElementFactory.createElement(ViewElementFactory.java:75)
         at com.sap.tc.webdynpro.progmodel.view.View.createElement(View.java:89)
         at com.sap.dynactions.DynCompView.wdDoModifyView(DynCompView.java:140)
         at com.sap.dynactions.wdp.InternalDynCompView.wdDoModifyView(InternalDynCompView.java:240)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:190)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:398)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.modifyView(ClientApplication.java:679)
         at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:381)
         at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
         at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
    Caused by: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
         at com.sap.tc.webdynpro.progmodel.view.ViewElementFactory.createElement(ViewElementFactory.java:65)
         ... 30 more
    Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: View: Cannot add element with duplicate ID "inf1" of type com.sap.tc.webdynpro.clientserver.uielib.standard.impl.InputField
         at com.sap.tc.webdynpro.progmodel.view.View.addElement(View.java:481)
         at com.sap.tc.webdynpro.progmodel.view.ViewElement.<init>(ViewElement.java:43)
         at com.sap.tc.webdynpro.progmodel.view.UIElement.<init>(UIElement.java:188)
         at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.AbstractInputField.<init>(AbstractInputField.java:143)
         at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.InputField.<init>(InputField.java:71)
         ... 35 more
    pls tell me how to run this application without errors.....
    thanks & regards,
    vila.

    Hi Vila,
    Issue here is you are trying to create Input field with already used id "inf1" in first line of code
    IWDInputField inf1=(IWDInputField)view.createElement(IWDInputField.class,"inf1");
    Please change it to
    IWDInputField inf1=(IWDInputField)view.createElement(IWDInputField.class,"inf2");
    and correspondingly line
    tc.addChild(inf2);
    Your code will work.
    Please note that you should follow....following code style in wdDoModifyview
    if(firstTime)
    //dynamic view elements creation

Maybe you are looking for