Create slideshow - language or font error ?!

Hi,
I have Fireworks CS3 in German - CS3-MasterCollection
In FW we can create a slideshow = create slideshow
The problem is, that in the panel appears 2 languages German
and Symbols (Japan, China)
What can I do?
Greetings

Hi,
> In FW we can create a slideshow = create slideshow
> The problem is, that in the panel appears 2 languages
German and Symbols
> (Japan, China)
I noticed the same problem on 22/02 and asked for help. It
seems to be a
"German" problem.
Leolux

Similar Messages

Error '' Unit IN2 is not created in language EN"

Hi all, I have created new material using UoM as "2 (square Inch), when i am doing excise Invoice for the same material it is ginving me error that '' Unit IN2 is not created in language EN" while it is allowing me to do GRN without Exc Invoice.
i have tried to CUNI , there is no entry showing for unit of measurement for "2 or IN2 . i tried to maintained is is giving message
'Unit of measure IN2 already exists' if i checked table t006A it is showing the Enrty in EN & DE both language,
i have also teried
Goto --> translation --> unit of Measurement but not sure what to do there, i have save confirm translation for the "2 there but still same problem is appearing.
Please Guide Any helpful ans will be awarded full marks. thanks

In what language did you create this new unit?
when you start CUNI, in the initial screen choose from menu GOTO > Translation to translate your unit into english language.

CUNI - Creation of new unit - error Unit is not created in language EN

Dear BI community,
We have created via transaction CUNI a new unit. Everything looks fine - it appears in the unit of measurement and the conversion works.
The problem only occurs when we check it in table T006A by example. When looking for it we get the following error message
"Unit is not created in language EN".
We have tried the "translation" option of CUNI but when we select another from language than EN we get not value.
Any idea?
Thanks,
Rodolphe

Hi All
We have the same issue.
Please let us know how could you fix this issue.
Thanks

Unit KG is not Created in language EN-- Error in MMBE

Dear Guru,
When i am running MMBE to verify the stock, system showing the stock as per parameters givien for Unit of Messasurement ( ex. EA.)
After Executing the report, at header level when i am chaing Unit of Messasurement ( Ex. to KG) system giving Error message
Unit KG is not Created in language EN
But when i am running mmbe by giving Unit of Messasurement KG and excuting ..its shows the report.
Y i am getting error message after excuting report and changing the UoM.
Plz guide me.
Regards,
Venkat

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B

Error 'Unit ST is not created in language EN...' at conversion exit

Hi
When i try to load a flat file i have this error message :
Error 'Unit ST is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field SALES_UNIT record 1, value ST)
My source has unit field. in the field in have sometime PC or ST --> ST is coming from BW
But when i load the file it gives the error for ST value.
In my datasource i have the correct CUNIT conversion routine apply on the unit field
Thanks for your help
Cyril

Yes this value is not maintained in T006 table. that's why i have the problem.
So how to solve it.
I have an ETL tools which read my DSO tables and it extract ST so i need to convert it this value exist in BI (internal code of PC)
Cyril

Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSI

Hi Experts,
I'm loading Flat File data of 1.5 Lacks record in to Cube. I'm encountering this error in InfoPack monitor.
Can anyone help to resolve this please.
Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 6628, value 1)
Thanks

It got resolved by checking the internal in the field selection tab of Datasource.

After Effects CC "Unable to Create Font" error fix?

Can some one help me with this complicated problem?
My After Effects CC 2014 won't work due to "Unable to create font" error.
Error appears when in the project footage is missing. When footage is found it runs perfectly fine.
What's the solution?
I'm running Windows 7 64Bit

Footage - I mean Product pictures imported from Photoshop. No odd file names.
Error appears on every project I have when I remove footage. *(replace product shot in photoshop for example)
System info:
Windows 7 Proffesional 64 Bit
Intel Core i7 CPU 3.40Ghz
Nvidia GeForce GTX 560 Ti
12GB Ram

When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459

When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459. Help!

but I tried that earlier and the same thing happened.
Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
Regards
TD

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

Distiller "can't find font" error with MS-Gothic and ArialUnicodeMS

Hi. I'm tried to verify that Distiller (both 9 and XI) and PDF Generator (11.0 SP1) are able to generate PDFs from Postscript files using a variety of fonts. Almost every font that I tried works perfectly fine, but MS-Gothic and ArialUnicodeMS both fail with "can't find font" errors. I've verified font configurations in both Distiller and PDF Generator, and lots of other fonts work fine. I've also verified that the two fonts are installed, enabled, and can be used in other applications (e.g., MS Word). In fact, I can generate PDFs from MS Word documents on the same server that use both of those fonts. I suspect the errors are misleading in that those apps can find the fonts, but are unable to open or use them for some reason. I've been able to replicate this behavior both on Windows Server and Mac OS X.
Has anyone seen behavior like this? Any suggestions on how to get more information out of these Adobe apps to get a better idea what the real error is?
JJR

Addirional note: This is a java class within a JavaFX application if that is relevant.
It does seem to be relevant - if I create the same class as part of a Java application rether than a JavaFX application it compiles without error. Is the imported java.awt.GraphicsEnvironment different in the tow cases??
Edited by: Sidereal on Aug 28, 2009 11:19 AM

Unit *** is not created in language EN - POSDM in CAR 1.0

Hi all,
I am getting the error message "Unit *** is not created in language EN" (Message no. BM305), while creating POSDM transaction.
I did set up and loaded data into BI components 0MATERIAL, 0PLANT, 0RPA_MEAN, 0MAT_PLANT & 0RPA_MARM.
I have verified that tables T006 & T006A are having Unit of measure 'EA' with language English.
When I used Tcode 'CUNI' and gave source and target language as EN. I am getting error message 'Could Not Save Target Text'. But this would not be an issue I guess, because I have verified a working system source/Target were not maintained there.
Please let me know if any further setting to resolve the issue.
Thanks,
Venkatesan

Thanks Vikrant for your reply.
Actually I have used flat file upload, and ensured that the Infoobjects are mapped properly.
When I use POSDM Workbench, I am getting error like 'Unit EA is not created in language EN'. T006/T006A are having UoM in language EN. Is any other common setting I am missing here?
0RPA_MARM - has only attributes? Do I need to upload TEXT for this object?
Thanks,
Venkatesa

'unit STD not created in language RO'

Hi there everyone
system outputs error message: 'unit STD not created in language RO' while loading the cube YSD_C03 (transaction SM37- in job log). (The loding process ends with error.) Why is that?
the same message or the like appears in transaction 'Monito for qRFC' in source system, for Data Source : 2LIS_13_VDITM, on the bottom of the screen.
Thanks for taking the trouble!

Hi,
Seems the unit is not maintained for the language Romanian in the source system.Nut you are getting some data in the R/3 transaction data for that.
just check the table T006A and see if this unit STD is maitained against the Romanian language or not??
May be you can ask your R/3 team to create it or change the document.
Thanks
Ajeet

Unit not created in language EN

Hello,
When loading a flat file, I receive the following error:
Error in conversion exit
CONVERSION_EXIT_CUNIT_INPUT
So then I checked the units of measure in my flat file against the T006A table via SE16 in BW. When I looked up some of the units of measure, I get the following error:
Unit is not created in language EN.
Question: How do I create the unit of measure in language EN?
Thanks,
George

Neither of the suggested solutions worked.
I ran RSDMD_CHECKPRG_ALL from se38 for 0BASE_UOM and 0UNIT.
I also removed CUNIT from the column CONVE which is next to the UNIT column.
I am still receiving the same errors as before.
Any other suggestions?

Unit *** is not created in language

Dear all,
in SAP CRM WebUI when I'm trying to create ERP Sales order from ERP Quotation in a follow up process I get the error "Unit *** is not created in language EN".
CUNI settings are OK in both ERP and CRM systems.
In a web page dialog when I want to confirm/choose the items to get copied into ERP Sales order I get the item shown in as 1 *** (instead of 1 PC - piece). When I confirm, in the next step system raise the error message.
Same scenario happens on all languages.
Any idea how to solve this is most welcome.
Best regards.
Hrvoje

CUNI setup (units of measures) in both systems is equal and seems OK.
Creating ERP sales order from reference to ERP quotation in ERP itself is working with no problems.
Best regards,
Hrvoje

Unit ST is not created in language EN

Dear all,
we are using SRM 5.0 in the extended classical szenario.
Here we are facing a problem in transaction BBP_POC (Process PO):
When we try to add a new line to a PO we get the following error message "Unit ST is not created in language EN".
Although the first line was created with ST in EN.
Afterwards it is not possible at all to change the PO. We get the error message in every screen.
Thanks and regards
Achim

Hi
See this pointer / links below ->
Note 781669: Correction of BBP_CND_CUSTOMIZING_CHECK
Please maintain your ISO Code for ST in Tcode CUNI, the ISO code for ST supposed PCE and tick the primary code. After you maintain the ISO Code, try to retransfer the PR again from SMQ1, and if there's still error, check to SRM--Tcode SLG1, and see what's the error.
Related link ->
Re: Incorrect status in pricing - SRM server 5.5
Re: PR transfer error to SRM " Measurement unit ST has no ISO code"
Do let me know. Hope this will help.
Regards
- Atul

Create slideshow - language or font error ?!

Similar Messages

Maybe you are looking for