Create snapshots for many images?

After I have completed editing on a batch of photos, I would like to create a snapshot for each selected photo. If I just create a snapshot, one is created only for the current photo, not for all others. Is there a way to create a snapshot for every selected photo?

I edit a few hundred photos from a shoot. I will now release them to one person in that form. Then I will further work on some for artistic development, probably with some further work in LR and then on to PS CS3. I want in some way to "mark" the ones I have released so I can get back to the released form of an individual image if needed. I'd prefer to do that at the first release stage rather than having to remember to take a snapshot before doing any further work--as I might forget to do that. I thought a snapshot was the way to do that.

Similar Messages

Create Snapshot for Multiple Images

How would you like the feature to work?:
To have the ability to select more than one photo and create a snapshot that would apply to all selected images.
Why is this feature important to you?:
When using Sync.. to synchronize work such as spot removal on several similar images (such as bracketed exposures), it would be a great time saver to be able to select these several images and create the snapshot to apply to all of them at once... For example, this would be a benefit when removing dust spots. It would just save time.

Hello Bud,
See below In answer to your question for clarification of my new feature request in September or 2009.
The dynamic implementation of Lightroom has its upside and its downside. Its upside is that through the ability to reset edits and virtual copies, and create snapshots of edited images it is not necessary to do multiple saves to recover different editing effects. The downside is that if snapshots are not created before new edits are made on photos or photo sets it is time consuming and sometimes difficult recreate an exact set of previous edits.
I am a travel and event photographer. I normally edit large final sets (50 to 200 images) out of a shoot that may have thousands of images. Normally I do not do a final snapshot of each image until the entire set is edited. This is because on final review of the set I will frequently tweek individual images to bring them into balance with the set. When I am done with the full set I must return to each image and creat a snapshot that I title "Final Edit dd/mm/yyyy" Then if I return in the future and intentionally or unintentionally make a change to one of the images I do not lose the set edits.
It is time consuming to go back through the full set and make a snapshot of each image in the set and sometimes I forget or simply run out of time and never get back. For this reason It would be very valuable to select the entire set and click on snapshot, create the snapshot name indicated above or some creative set ID and automatically create a snapshot preserving the individual edits of each of the selected images with the same snapshot name.
Another benefit of this feature is that if the images in a set Included images from multiple directories and were not in a collection they could all be located by their snapshot name.
I believe that if this feature was implemented it would be used by many if not all professional photographers that use Lightroom to do the majority of their editing.
Jim

Has anyone received this error, "Failed to create directory for PX images"

I recently migrated to Windows7. 98% of the migration went well. All of my pictures and Elements Catalog came over fine. I had to "reconnect" all of the pictures in the catalog due to new directory name, but it worked fairly well. Of the 11,000 entries synch'd with photoshop.com, 10,500 re-synch'd fine. However almost 500 are stuck with an error of "Failed to create directory for PX images". Can anyone help with how to resolve this issue? Note, I did try to remove the picture from the album and then re-add, but that didn't work.
Thank you in advance for any help you can provide.
Thanks,
Jeff

function(){return A.apply(null,[this].concat($A(arguments)))}
JeffAGoldberg wrote:
Erased everything on photoshop.com (which I couldn't accomplish due to bugs on photoshop.com) and created a new catalog.
Jeff
What problems are you facing in deleting files from PS.com. Are you able to maintain a proper synced catalog now ? If possible please elaborate so that we can help.

Create hyperlink for all images

Hello everyone,
I am new to scripting, but I am assuming my current task needs some scripting.
I have a catalog laid out in InDesign. It is about 250 pages and each page has about 10 image so there are about 2500 images. The way I have them laid out is each image is placed inside a frame. Now, I need to hyperlink each image to an external web site. For example, for an image whose name is (12345.jpg), the hyperlink will be "https://www.testabc.com/productdetails.aspx?itemnum=12345". Similarly if the next item is 67890, then the hyperlink would need to be "https://www.testabc.com/productdetails.aspx?itemnum=67890". All images are linked to a folder on the computer.
Can you please suggest how best to write and run this script. Any and all help would be greatly appreciated.
Thank you

I can't test the script at the moment, but looking at it, I do notice that the entire for loop is within a try-catch. That means that if it encounters an error, it stops processing any more graphics. There may be a good reason for this, but I think you could just move the try-catch into the for loop, so it can catch any individual linking error without stopping completely. Something like this:
var myDoc = app.activeDocument;
var myGr = app.activeDocument.allGraphics;
alert(myGr.length)
    for(i=0; i<myGr.length; i++)
      try{
        var myGrName = String(myGr[i].itemLink.name);
        var mySplitName = myGrName.split(".")[0];
        app.select(myGr[i].parent)
        myHyperlinkPageItemSource = app.activeDocument.hyperlinkPageItemSources.add(app.selection[0])
        var myHyperlinkURLDestination = app.activeDocument.hyperlinkURLDestinations.add("https://www.testabc.com/productdetails.aspx?itemnum=" + String(mySplitName)));
        var myHyperlink = app.activeDocument.hyperlinks.add(myHyperlinkPageItemSource, myHyperlinkURLDestination, {name: "https://www.testabc.com/productdetails.aspx?itemnum=" + String(mySplitName)})
        } catch(e){}
alert("Process Completed")
The forum's syntax highlighting is giving me a hard time, but I would probably throw an "alert(myGrName)" into those catch brackets so you can begin to try to figure out where it's erroring out (if that is indeed the problem).
Another thought is that, if there's a chance of multiple images with the same number, you might want to have your hyperlinkURLDestination check for an already existing destination before adding a new one.

Create Placeholder for Rotating Image Link

Hello,
The other day I created some rotating banner ads on my site thanks to the fantastic help I received on this forum.
Once thing I notice on my site is that when the banner ads switch the spacing on the page shifts so that the text/jpgs that are below the ads bounces around.
I was wondering if anyone knows a way that I can create a placeholder to contain the banner ads so that the other content would stay put?
Thank you so much for any help that you can provide.
Glenn
My website is - www.glennbartley.com
The code I inserted is:
<a id="bannerid" href="photoworkshops/Workshops/Manitoba-Churchill.htm"><img src="naturephotography/Banner Ads/BannerAdd-Churchill2014.jpg" /></a>
<script language="JavaScript">

</script>

The anti-right click script you have is useless. If someone can see your images in their browser, they are already downloaded to their computer. Taking away the right click function will not stop them from taking the images if they are so inclined and it is supremely annoying. If you want to protect your photos, use a watermark that is difficult to remove from the image instead.
You have some errors in your code that are being caused by having things out of place. Run your page through the validator at http://validator.w3.org so you can clean those up.
As for the shifting issue, that is being caused by the container of the images going empty for a moment and shrinking it's height. Set the height of that container in the css to an appropriate number and it should stop.
Something like...
#bannerid {
height:50px;
Set it to whatever the height of the banners is and it should fix the problem.

My 3.4.5 has ~ 35000 jpg masters. I have set aperture not to create previews on import and have ensured "maintain previews" is not ticked. Every time I start aperture it insists on creating previews for ~ 4300 images. Why?

Having had the previews created I selected all photos and "delete previews". It did this quickly and no more previews being created. Once aperture is closed and then re-opened aperture immediately sets about creating the previews for the same photos. I don't understand why this should be happening.
This is occuring on my Mackbook Air (Aug 2012) which has 256 GB storage. I am fast running out of space as I am using "Managed Masters". I intend to make the masters referenced by relocating them to an external HDD but before doing this would like to clear up this problem first. I keep my Vault on the external HDD and have Time Machine and Time Capsule. When I have relocated the masters to the external HDD I intend that TM backs the external HDD to the TC. I tink that I will use the second partition on the external HDD for Carbon Copy Cloner to back up the Mackbook Air.
Any help or advice warmly welcomed.

Frank
Many thanks for your input.
Following your advice I have selected all the projects individually and checked the status of Mantain Previews. Some were indeed marked up for Mantail Preview so I have unmarked them.
I have also selected Photos and deleted previews and also repeated this for My Projects.
Checking the Get Info for the Preview folder in Aperture Library in Finder this now tells me that I have zero bytes for 564 items.
Close and then reopen Aperture and it regenerates these564 previews in the blink of an eye. I haven't been able to locate these photos yet. I know there are about 120 in facebook and 10 in photostream but dont know where the rest are.
It seems the issue is not with Aperture but with myself and not understanding Aperture sufficiently well
Do you see the problem this way?

Newb Question: Creating overlays for an image

I'm new to flash and am stuck on a project I'm working. Any
help would be greatly appreciated.
Essentially I'm trying to create a webpage with an image of a
piece of furniture on one side of the page. On the other side
I'm trying to create some digital swatches to represent a
type of material that part of the furniture can have as an option.
What I'd like to do is set it up so that people can click on
the digital swatch and have the furniture image change so that
they can see what it would look like with that option.
Thanks in advance for any assistance.

Hi ,
I am working on IndesignCS2 as a third party developer . I have overrided Drag-Drop functionality ( while working with
Document ) in my plugin. The problem is now I want to apply same functionality to Master Document with slight differece .
Can you tell me how to identify Master page programatically ,So that I can differentiate these both cases programatically .
I'll be greatful to you if you could help me.
Thank You.
Regards
Vijay Choudhari

Make Ps create thumbnails for CR2 image files

It's frustrating trying to find an images with cryptic camera file names. Why doesn't Ps create thumbnail images of those file types?

Just as a bit of follow-up, with appropriate codecs these things are entirely doable....
Windows Explorer browsing of many different image file types in Thumbnail view:
File Open dialog from Photoshop showing image preview:
Even Microsoft Photo Viewer works:
-Noel

Create subfolders for many movies

My kids and me have hundreds of videos made at home. We would like to organise them on the Apple TV into folders. For example, under the folder Birthday, we would like to put various years and all our videos of birthdyas during the year in that folder.
Is there a way of doing this ? We can create folders and playlists in iTunes, but these playlists disappear and all the videos are alphabetically listed on the apple TV.
Any help appreciated.
TIA
Anil

Welcome to the  Discussion Forums.
Unfortunately folders are not currently available for movies etc. Many believe this is one of the biggest omissions from the tv and I am one of those that agree.
Whether or not this gets included in a future update or not is anyone's guess but if consumer demand has any bearing on what gets included in updates this would be top of the list.

Looking for a script that creates labels for linked image files in the layout

I'm working on a large book with over 650 images and I need to show the file names along with the images in layout for proofing reasons. Does anyone have a script for that does something like this? I'm working in INDD 6.
Appreciate your help / suggestions!

This is great— thank you! however you have to select all the image in order to generate the live caption. My file is about 320+ pages, any way to run live caption without having to select the files?

Create frame for an image, PSE 10

After reading various help sites and watching tutorials, I still cannot get a frame to show up in the workspace where I have the image. I bring the image into the workspace, drag a frame thumbnail on top of the image, but the frame never appears. I get the image surrounded by a sort of checkerboard space. I'm not stupid and it seems to me this should be a simple operation. What am I not doing? Thanks so much.

No, seeing as how it's an intermittent problem, try the Prefences thing.
Added:
Oh, wait a minute -- check the size and resolution of your image. If it's a huge image at a very high resolution, it's probably that the frame size is too small to appear onscreen. If you view the framed image at "Actual Pixels" size, can you see those failing frames?
Ken
Message was edited by: photodrawken to add comment.

Firefox will not work with our library's web site, creating inconvenience for many users. Ideas?

The Marin COunty(Calif) web site is interactive, allowing us to reserve or renew books on line....The new Firefox will not allow this interaction, so I wonder if you could fix the problem+?

What happens if you try to login?<br />
Is there only a problem with the login or are there other problems?
Is all data send correctly to the server?
It is a form with 3 input fields.
The first input doesn't have a type attribute (defaults to type="text") and the second has type="name" that may be invalid or not recognized.<br />
https://developer.mozilla.org/en/HTML/Element/input
<pre><nowiki><input name="name" id="name" value="" size="40" maxlength="40">
<input name="code" size="40" maxlength="40" type="name">
<input name="pin" id="pin" value="" size="40" maxlength="40" type="PASSWORD"></nowiki></pre>
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25

How to create snapshot on Oracle VM 3.1.1

Dear All,
Any one know about how to create snapshot in Oracle VM 3.1.1? Where we can find it in Oracle VM 3.1.1?
Please kindly shared experience about this.
Thanks and regards,
Vandy

Thank you very much for your help.
Now I am using Sun Storage 6180 Array direct attach (Fiber Chanel) with 2 Sun Fire X4100M2 Servers as Cluster, I don't know whether this storage can create snapshot for this or not? How about Oracle VM Manager can help for this?
It seem more difficult than VMware vSphere, if Oracle can create a option for this is very good.
Thanks and regards,
Vandy

Snapshot for packages

Hello All,
Can anyone guide me on how to create snapshots for packages?
Really appreciate it. Thanks.

@blackout23
Yup, signing out is a known problem. It is also not possible to add or switch to another user or Google account yet, neither using the login manager nor from the Settings menu, probably because a lot of the infrastructure of Chromium OS isn't actually there.
Currently, I've wired things up to use the login manager only the first time you log in (it gives you the "out-of-box-experience" and asks for your Google account info), also because using it for all logins would cause it to ask for a password, which is inconvenient if you start the UI from a display manager (in which case you would have been asked for a password already).
To fix your problem, I think the best thing to try is to delete $HOME/.config/chromiumos-ui/user directory and try to login again (my script will then try and use the login manager once more). Since everything on a Chromebook is supposed to be synced to the cloud, you should not lose any data, but make a backup of $HOME/.config/chromiumos-ui if you want to be really sure.
Hope this helps, if not, don't hesitate to ask
Last edited by ackalker (2013-12-02 13:53:58)

Error in creating snapshot

Hi,
I use the following script to create snapshot for my table everyday.
CREATE MATERIALIZED VIEW item20060830
NOCACHE NOPARALLEL BUILD IMMEDIATE
USING INDEX
NEVER REFRESH
AS SELECT
FROM
item;
However, these few days, it fails to do so and gives me the following
error whenever I run it.
ORA-00600: internal error code, arguments: [kcbgtcr_12], [1], [], [],
Can someone advise what could be the possible reason?
I'm using Oracle9i Enterprise Edition 9.0.2.1 (solaris version).
Thank you.

Cause: This is the generic internal error number for Oracle program exceptions. It indicates that a process has encountered a low-level, unexpected condition. Causes of this message include:
1) timeouts
2) file corruption
3) failed data checks in memory
4) hardware, memory, or I/O errors
5) incorrectly restored files
The first argument is the internal message number. Other arguments are various numbers, names, and character strings. The numbers may change meanings between different versions of Oracle.
Action: Report this error to Oracle Support Services after gathering the following information:
1) events that led up to the error
2) the operations that were attempted that led to the error
3) the conditions of the operating system and databases at the time of the error
any unusual circumstances that occurred before receiving the ORA-00600 message
4) contents of any trace files generated by the error
5) the relevant portions of the Alter files
Note: The cause of this message may manifest itself as different errors at different times. Be aware of the history of errors that occurred before this internal error.
-aijaz

Create snapshots for many images?

Similar Messages

Maybe you are looking for