Create solution for each system Landscape?

Hi,
We are using Solution Manager 4.0.
We have created one solution and all of our ECC 6.0 systems with in ECC landscape have been already integrated with that existing 'Solution'..
Now, we are implementing BI 7.0 system.Since this is seperate landscape
would it be better if i created another solution and integrate all BI systems with
that?
I thought of taking your opinion before i implement that.
Thanks,
Ram

If you group them by system type, how do you classify the Leading Role of your Solution?
You have to assign, Dev, Test, Prd, etc to the leading role of your solution, other systems in the logical component that do not have the same classification that the solution is assigned wont show up.
edit -
Once you have an active solution you can edit your solution settings and add other systems to your solution even if the leading role of your solution differs from one of the systems of your logical component. You can simply add a system by adding the logical component that it is defined in, then right click on the system and click "add to solution".
Edited by: David Labuda

Similar Messages

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

Need to change screen colours for each system in the landscape

hi ,
we are in need of having different themes for different systems in the landscape .
that is
if i click development system , the screen with 'theme1'
if i click quality system system , the screen with 'theme2'
if i click production system system , the screen with 'theme3'
how to configure this colour setting in accord to the system for all the users

Hi Susin,
You would do this by changing the parameter sapgui/theme for each system. It uses the Tradeshow theme by default as of Web AS 6.40. As long as the SAPgui itself is set to "System Dependant" then it should work fine.
Regards,
Nelis

Defining CMS Track Data for 4 systems landscape

Hi all,
We are configuring CMS for 4 system landscape (DEV - TEST - QA - PROD).
The Track Data only allow 3 system landascape , as we can see "Landscape Configurator " and also in the following documentation:
http://help.sap.com/saphelp_nw04/helpdata/en/e9/c7cb6545a3446b92eff4f9ba876072/frameset.htm
XI Repository URL DEV
HTTP address of the server on which the XI development system is installed
XI Repository URL CONS
HTTP address of the server on which the XI consolidation system is installed
XI Repository URL PROD
HTTP address of the server on which the XI production system is installed
The question is :
" How can we define Track Data for 2 Consolidation Landscapes " ?
Thanks
Artur Moreira

Hi,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Also...
How to configuring the CMS for XI?
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Where can I get installation files of DTR, CBS, and CMS?
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
'How ToTransport XI Content Using CMS'.
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards
Chilla

Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

Hi ,
I am getting the below error:
Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
Regards
Anumit

Anumit,
when will you get this error?
if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
if it doesnot work
try to reimport the certificate or restart the server
Thanks
Bala Duvvuri

Could not create JCOClientConnection for logical System:

Hi,
I am facing a wierd problem in using the JCO destinations.
I created a page where it is using some JCO destinations say SAP_R3_HumanResources.
when i open the page it is working for the first time .without closing the page if i open the same page again it is giving the following error
Error connecting using JCO.Client: null
Error connecting using JCO.Client: null
Pernr:Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.swissre.CustomData. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Please let me know how to solve this issue
Thanks
Bala Duvvuri

Hi Bala,
It seems that this is a custom webdynpro application which when executed causes such problem. This might be due to JCO connection not released back to the pool.
Please refer to the following threads and that might be helpful.
Re: JCO Connection close
How to close a model object connection for Adaptive RFC?
You might have to call disconnectIfAlive method on your model.
Regards,
Jigar

Create of (demo for)OVAI (transaction for create entries for each vendor)

hi all,
can anyone plz tell me how 2 create (demo for)OVAI (transaction for create entries for each vendor)
thans & regards,
srinivas reddy.

hiii
yes you can call transaction like that..take tcode in that parameter then you can use it in your program with statement like
call transaction (variable)..in background process.
regards
twinkal

Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA

Hi,
I am facing a big problem...I have created WebDynpro Application & when I am running that application from WebDynpro, it's showing the page but giving me the error message as:-
Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA - Model: class com.bcone.bcool.musa.model.MUSABAPI. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
What do I do? what connections I have to check?
pls help.

Hey if you are connecting to SAP system making use of adaptive RFC model you hav to create logical systems(JCOs).So while creating the model you have to specify 2 logical system names(one for model data or on for the meta data).If you have not created the JCOs or if the JCOs are not active then you are going to get this type of error.To activate those JCOs ask your administrator to activate the JCO for metadata of your application.If you are having proper credentials then log on to portal
System administration>webdynpro>expand the local directory>select your project>click on maintain JCOs and activate the JCO for the metadata.
Or else change the logical system in your application.

Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

Looks nice!
I understand what you've done now. You used the "Set Layer Visibility" command which sets the on/off state of all the layers at once. What you need is a more subtle approach, one that will only change the state of the specific layer associated with the button, not the rest of them (so that you could have multiple layers enabled at the same time). The way to do that is by using a script.
I wrote the script for you and applied it to the top-left counties (WILLIAMS and FULTON), in the attached file. You can now copy the actions I associated with those buttons to the rest of them, and it should work as you want it to.
The file: MAP-HHA-Geographic(3)_edited.pdf - Google Drive

JCO connection error:Couldn't create JCOClientConnection for logical System

Hi All,
We are facing a production outage issue.
We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error   saying Could   not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
u2022     Minimum value of JCo Pool Size in total = 80
u2022     Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
u2022     Maximum Number JCo Connections = 160
Please let us know if we are missing on some settings, any help in this regard is appreciated.
Regards,
Priyanka

Hi,
As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
Regards
Puneet

Could not create JCOClientConnection for logical System: SAP_R3_HumanResour

Hi,
For all the standard ESS (sap.com) the JCo connection used is SAP_R3_HumanResources .
All the applications are working fine.
I am trying to add a test Component in one of the (sap.com~eepro) for testing a standard BAPI call for getting user details.
I have used the same Model and the same SAP_R3_HumanResources destination name.
But i get the following error when i try to execute the standard BAPI_USER_GETDetails (non - HR).The other applications for standard components (Vc ) work when i run the application.
My question here is why a custom , local webdynpro when try to make a RFC call using the running already existing JCO connection throws such error.
How could this be solved.Note the connection is running and working fine for all the ESS webdynpros!!
Error:
Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.test.hr.model.Test. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Your experience would be worthy enough.
Regards,
Swathi

Hi Swathi,
Here are some suggestions to trace down to the actual problem.
1) First check if all users are having this issue. (All other applications working and only one application giving problem)
2) If no, then take list of users having this problem and check their portal and SAP accounts
3) If yes, then concentrate on testing the JCo connections and the user account mapped in JCo settings
Possible things u can check is user's portal account (locked or not), SAP account (lock or validity), pernr mapped (validity), JCo user (check for lock), ping and test JCo connections
If none of them are issue, check the logs if there are any trace for this issue. I believe there must be certainly one. That can help u going further.
Regards,
Harini S

Create entry for remote system necessary?

Hello,
is it necessary to start in CEN transaction RZ21 u2192 Technical infrastructure u2192 Configure Central System u2192 Create entry for remote system.
What is the result of this transaction and why is a <sid>adm user needed?
Thanks

Hello,
I take you mean you have a JMS queue created in an Oracle database (A) and you want to propagate messages to a JMS queue create in an Oracle database (B)?
If that is the case you use normal AQ propagation. You can follow <Note:102771.1> as an example changing the ADT as appropriate, etc.
MGW is only to be used for Oracle to 3rd-party propagation.
Thanks
Peter

Can I use local SLD for each system?

Hi!
Our company is a big SAP outsourcing with hundreds of SAP systems.
We plan to use the local SLD for each new system (>640).
Is this a possible and good solution?
Point guaranteed.

Jenni,
Please have a look at the below doc on how to place SLD in your landscape, its worth reading and you can decide your dimensions of placing the SLD.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/29b1f3ea-0c01-0010-2dae-cc64bb381c97
Best regards,
raj.

Creation of solution for J2EE system

Dear All,
We need to add our EP7 (JAVA) in solman as new solution kindly suggest.
Thanks,
De'

Hi Surojeet Dey,
Use this note: "Note 987835 - How to define Solutions in SMSY for Diagnostics".
Steps:
1. SMSY->Landscape Components->Server->Right Click and Create new server.
2. SMSY->Landscape Components->Databases->Right Click and Create new database.
3. SMSY->Landscape Components->System Components->Right Click and Create new system component. Enter System Component name(eg., EP7_J) and choose Type as "Java".
4. SMSY->Landscape Components->Systems->Right Click and Create new system.
Enter a System name(eg., EP7_S); choose Product as "SAP Netweaver" and Product Version as "SAP Netweaver 7.0(2004s)". Save the changes.
5. Now select the created system(EP7_S), Go to tab "Selection of Main Instances" on the rightside.
Check the check-boxes of "Enterprise Portal" for "Relevant" as well as "System Component" and enter the created java system name(in this case EP7_J). So you linked the java system to EP system.
6. Next, Create logical component and assign this logical component to the EP system.
7. Finally create a solution and assign this logical component to this solution.
You can use SAP tutors also to create Systems(SMSY), Logical components and Solution.
https://service.sap.com/rkt-solman
Once you login rkt-solman, then select Solution Manager 7.0 > Technology Consultants and System Administor
1. [System and Solution Maintenance (SMSY)|https://websmp203.sap-ag.de/~sapidb/011000358700000894082006E.sim]
2. [System Landscape (SMSY) - Create Logical Components|https://websmp204.sap-ag.de/~sapidb/011000358700004860082004E.sim]
3. [Assign Systems to new and Existing Logical Components - with Assistant|https://websmp204.sap-ag.de/~sapidb/011000358700002912242006E.sim]
Regards,
Sanjai

Can't find an SC at the CMS after creating it at the System Landscape

Hello,
I am trying to implement SAP's Scenario 2 of the NWDI located at this URL:
http://help.sap.com/saphelp_nw04/helpdata/en/71/384c4005a99523e10000000a1550b0/frameset.htm
At the moment I am at the preparation section.
I have finished succefully the
"Creating a Software Component in the SLD" part and now I am at the "Creating a Domain and Track in the CMS".
At this part you should *** the SC using the "Add SC..." button. When I click tthis button I see a lot of SC's yet I can't see mine. I tried filering by each one of the parameters and double checked all the parameters of the SC at the System Landscape yet I can't find it.
Any idea why?

Hello Pascal,
I assume you are fereffing to this post installation step:
Register the SLD Server in the SLD
1. On the initial page of SLD, choose System Landscape
->Technical Landscape.
2. In the Technical System Browser, choose New Technical System.
A Technical System Wizard appears.
3. In the Technical System Wizard, choose the option System Landscape Directory and
then Next.
4. On the next page, enter values for:
Web AS Java: The <SID> of this system
Roles: Landscape Server
CIM Server URL: http://<server>:<port>/sld/cimom
Object Server: The name of the object server of this SLD server (see also
Activate the SLD Server)
5. Choose Finish.
I have made this update at the installation process. In any case I have verified that it exists and it does yet I still see only 6.30 versions when I add dependencies to my SC. Please correct me if I'm wrong.

Create solution for each system Landscape?

Similar Messages

Maybe you are looking for