Create speech audio in Spanish

I am using the Captivate 6 English Version but would like to gereate the audio in Spanish. I have installed the additional resources but still generates the audio based on an English person trying to speak Spanish. Not sure where to set-up that audio should be generated in spanish (the text provided is in spanish). Thanks!

No other languages are coming with CP6, just English voices. Very sorry, you'll have to look (buy) elsewhere for TTS voices.
Lilybiri

Similar Messages

  • After encoding a sequence, music audio (Track 1) is fine, but speech audio (Track 2) is sped up and crackling.

    Hello forumites,
    So I've run into an odd problem I haven't experienced before. I exported my docu film last night. I have my music audio on A1 and speech audio on A2 in the timeline. When reviewing it, the music audio plays back fine, but the speech audio is playing back slightly fast (resulting in a bit of a chipmunk effect) and it's crackling (possibly because of the speed-up). The video appears to be in sync with this weird speed-up.
    I'm using Windows 8.1 Pro and the latest version of Adobe Premiere Pro CC. Although this is happening on two different systems, here are my computer specs.
    PC 1:
    Custom built desktop
    CPU: FX-8350 4 GHz
    Motherboard: ASUS Sabertooth 990FX R.2
    Memory: 16 GB DDR3
    SSD: 256 GB Samsung 840 EVO (Primary)
    HDD: 2 TB WD Red (Data)
    GPU: 2x Radeon 6950 (CrossFireX mode)
    PC 2:
    ASUS G53S laptop
    CPU: Core i7-2830QM 2 GHz
    Memory: 6 GB DDR3
    SSD: 120 GB Crucial M4 (Primary)
    HDD: Seagate 500 GB (Data)
    GPU: GeForce 460M
    I did a bit of troubleshooting and thought that perhaps I nested sequences too many times. So, I did a few test renders from the ground up on each sequence where the nesting gets deeper. I got up to two nesting levels (where one sequence has a nested sequence which contains a nested sequence - Sequence-ception ) with all audio rendered normally.
    However, the next nesting level resulted in the audio issue. So, I copied and pasted the timeline from the previous sequence to the current sequence, overwriting the nested timeline. Oddly enough, it still caused the problematic audio, which has me thinking that it's not related to nested sequences after all.
    Keep in mind that playback inside Premiere works fine. I even created a new sequence from scratch into which to paste the timeline. Also, encoding using different codecs didn't make a difference. Of course, I also did the basic things and updated my video card drivers, restarted my computer, uninstalled/reinstalled Premiere Pro and Media Encoder, and tried encoding without GPU hardware acceleration.
    Here are some 5-second DNxHD renders to get a grasp of what the results are.
    Double Nested: https://www.dropbox.com/s/0xp50qbm48gjupd/Double%20Nested.mxf?dl=0 (Good audio)
    Triple Nested: Dropbox - Triple Nested.mxf (Bad audio)
    I should probably mention that I configured symbolic links to remap the Users folder to my data drive, as that has been known to cause some problems with Windows, but I made sure to link all the assets in my project using the actual file paths rather than the symlinks. Also, I've been rendering other projects prior to the previous patch with this setup and didn't experience any issues.
    Has this happened to anybody else as well? I did some searching for this issue but I'm apparently the only one. I'm just hoping this is some weird bug introduced in the last patch.

    That may be so, but why even have that feature if one can't even take full advantage of it? I'll be asking Adobe that if I don't get many suggestions or input here.
    Thanks for responding, though!

  • Is there a way to create an AUDIO alert when my MacBook Air (Mavericks) battery runs low (say 10%)?

    Is there a way to create an AUDIO alert when my MacBook Air (Mavericks) battery runs low (say 10%)?  I often miss the visual power percentage in the top bar, so would like an audio alert as well.

    For global alerts, yes:
    There is no need to do anything before the alert appears, and the MBA will not lose data should it go to sleep. If it goes to sleep at 0% you still have several hours to plug it in before it shuts down.
    I wouldn't even bother displaying the percentage value.

  • How can I create an audio CD from the audio only portion of my iMovie?

    Hello, I brought in about 50 min of Digital video into iMovie, I separated (split) the audio from the video, I unlocked the audio, I deleted the video, and now I want to just create an audio CD from the audio that is left.
    Can I do this? and if yes how? If I can not, how can I create an Audio CD from on my G5 off a tape on my digital camcorder?
    Any help would be apprecaited.

    This is how:
    Go to:
    'File'
    'Share'
    'Quicktime'
    'Expert Settings'
    'Audio as AIFF' or pick your brand of compression.
    Drag and drop the resulting file into iTunes.
    Enjoy!
    P.S. - You didn't need to delete the video but I think that'll be okay.

  • How i create an audio streaming in adobe muse?

    I am creating an online radio station. As I can create streaming audio with adobe muse?

    Hi
    Please refer to this thread :
    https://forums.adobe.com/message/6276219
    Thanks,
    Sanjit

  • HT201441 how can i create and audio cd from a music track I have on my ipod

    how can i create and audio cd from a music track I have on my ipod

    This is how:
    Go to:
    'File'
    'Share'
    'Quicktime'
    'Expert Settings'
    'Audio as AIFF' or pick your brand of compression.
    Drag and drop the resulting file into iTunes.
    Enjoy!
    P.S. - You didn't need to delete the video but I think that'll be okay.

  • How to create an audio role for any library in FCPX

    Does anyone know if there is a way to create an audio role in one library and have it as a saved preference that you can use in any library?
    Or do you have to re-create the roles for every library?
    Any help is appreciated!
    Thanks!
    Adrian

    Looks like this has been resolved in the latest update of FCPX 10.2

  • How to create a audio only conference at MCU 5320 .. ?

    How to create a audio only conference at MCU 5320 .. ?

    Hi Hermanus,
    Please, post this question to Telepresence support community as this community is for Cisco WebEx Meetings Server and Cisco Unified MeetingPlace products and is not being observed by TP experts. Hence, you will not be able to get an answer to your questions.
    I hope this helps.
    -Dejan

  • Creating Alternate Audio Streams

    Hi guys,
    I've worked with DVD Studio Pro before and I'm currently working on this project where I'm supposed to make a DVD that will play the film in either standard or dolby 5.1 audio. I've been trying to figure out how to make it use alternate video streams without just making two sets of the film in its entirety and I just can't understand the manual at all with all the talk about stories and whatnot. Can anybody tell me in simpler terms how I can create a dvd menu that will allow the viewer to choose to play the film in either normal stereo audio or dolby 5.1 audio?

    Create both audio streams. Drop them into tracks 1 and 2. Now you have 1 video track with 2 audio tracks the user will be able to choose from while the video is playing. When you create a menu button, the button Inspector allows you to not only set a buttons target but will also allow you to set which stream to play.

  • Can I created a calendar in spanish

    I am trying to create a calendar in spanish.  Does anyone know how to do that?

    You can change the system's languague to Spanish to work on the calendar or try this application: TJ-HD Software - Language Switcher. It will let you use a different languague in an applicaiton while keeping the system language the same.
    I've not used it but others have reported success with it.
    OT

  • Im using Creative cloud trial, i want to use Premiere speech analysis in spanish, i downloaded the language model, but when i try to use it , its blocked

    Im using Creative cloud trial, i want to use Premiere speech analysis in spanish, i downloaded the language model, but when i try to use it , its blocke

    You will likely get better program help in a program forum http://forums.adobe.com/community/premiere/content
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I have premiere pro cc and i can't put the speech analysis models spanish for adobe premiere pro cc

    I have Premiere Pro CC and I can't put the Speech Analysis Models Spanish for Adobe Premiere Pro CC, they're installing on the folder CS6 and when I try to analyze it only appears on english... If anybody can help me

    the messsage is for forum housekeeping and is not a message directed to you.

  • Premiere CS5 Captures .mov on mac but creates four Audio lines in Timeline...

    Hello,
    when I capture a video from my sony camera it captures it in the *.mov format on my mac. Thats ok, but when I insert the captured video in the timeline, it does not use the Audio line directly below the video line for the audio track, but creates 4 audio lines (audio 4, 5, 6, 7) and puts the tracks on them.
    What do I have to do to make Premiere inserting the audio track just like in other formats as AVI, MP4, MPG etc. into the audio 1 directly below the video 1 track?
    I woukld be very thankful if anyone could help me
    greets
    Alex

    Thanks
    You're right, it records 4 Mono Tracks.
    I captured it right now on a Win7 PC and found out that there it shows one Video Track and one Stereo Audio Track on Audio 1.
    I have made two screenshots:
    This is how it looks like on my mac, when I capture something and put it into the timeline:
    http://www.abload.de/img/adobeonmactn0n9.png
    This is a screenshot from my PC:
    http://www.abload.de/img/adobeonpchf3k9.jpg
    I don't know whether its about a setting in my camera or a setting on my mac...?

  • Creating An Audio CD in FCP

    Can I create an audio CD by editing the sound in FCP?
    History: A client was given an audio cd of his show, who in turn, has asked me to create copies. There is only one long track that fills up the entire CD. The client is wondering if "chapters" can be added so that a listener can go straight to a certain part of the CD without fast forwarding.
    Is FCP the application to do this? I think if I import the audio into FCP, I can create and export separate audio files to iTunes, then create a CD. I am guessing to this process, since I've never done this.
    Or can "track" breaks be added, similar to adding chapter breaks in video, without breaking up the large audio files into small ones?
    Please let me know if there is another discussion area for this, since I am a bit stumped.
    Thanks,
    Gary

    you could use FCP but i'd be more inclined to use Soundtrack or another audio editing application.
    in fact you should be able to break the track up into mutliple segments just using QT player, by selecting smaller portions and exporting those as self-contained files

  • Burn playlist to cd in itunes to create an audio cd

    I'm trying to burn playlist to cd to create an audio cd in itunes but certain songs get truncated (go from 4 to 5 minutes each to 2 minutes in length).  I know the length of the playlist fits on the cd, so what's happening and how can I fix it??  Also, at the bottom of the screen that shows the playlist you can see the length of the playlist.  Once the playlist goes over an hour, the length shows 1.1 or 1.2 hours, etc.   Can I change the view to see 1 hour and the number of minutes?

    Also, at the bottom of the screen that shows the playlist you can see the length of the playlist.  Once the playlist goes over an hour, the length shows 1.1 or 1.2 hours, etc.   Can I change the view to see 1 hour and the number of minutes?
    Yes. 
    Click the time, and the format will change to hours:minutes:seconds. 
    Click it again, and it changes back to decimal hours.

Maybe you are looking for