Create standby database using restore backup
Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.
f55237a7-2c38-4db3-a7a3-1d77256f0730 wrote:
Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.
Hi,
You are created standby control file on primary and copied to standby side:
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
And now, in paramter files, you have CONTROL_FILES parameter as below :
control_files='/u01/app/oracle/oradata/DB11G/control01.ctl', '/u01/app/oracle/fast_recovery_area/DB11G/control02.ctl'
it means you must copy controlfile IN standby side to second control file. Control files must be same.
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
You not need shutdown priamry database, becuase you copied standby control file to standby side, and all operations goin in standby side.
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Yes, you can use (db11g_stbg.ctl) standby controlfile
Regard
Mahir M. Quluzade
Similar Messages
-
Standby database using rman backup
I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AMuser10444101 wrote:
I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AMSee the following link
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#i1008564 -
Build standby database using cold backup on a different file system & host
Hi gurus,
The database version is 11.2.0.3. OS is HP UX Itanium 11.31
I am building a standby database using cold backup of primary. The primary mount points are (/p003/oracle, /p004/oracle) on HOST1 and the standby file system on HOST2 are (/s003/oracle,/s004/oracle). I am not using Data Guard to apply logs as we have a script that mounts the log location periodically to standby server and apply the logs to make it current. I am using cold backup as the database is small like 200G and can be taken down. Could someone help me with the steps to build standby using cold backup for a different file location in standby ?? My concern is I can copy the data files from /p003 to /s003. How will I build the controlfile ?
If it was same File system on both HOST 1 and HOST2 I can copy the cold backup to the standby server, build a standby control file on primary and copy and replace the standby control file and everything was set.
Thanks
Cherrish VaidiyanHello;
I have a note on this using a cold copy of the current files instead of a copy backup :
http://www.visi.com/~mseberg/data_guard_on_oracle_10_step_by_step.html
I will post SCP SQL in a moment.
Best Regards
mseberg
set heading off
set feedback off
set pagesize 100
set linesize 400
select 'scp '||a.name ||' server_name:' || a.name as newname from v$datafile a;
select 'scp '||a.name ||' server_name:' || a.name as newname from v$controlfile a;
select 'scp '||a.member ||' server_name:' || a.member as newname from v$logfile a;Edited by: mseberg on May 25, 2013 10:35 AM -
Creating standby database using data guard.
Current Env:
Oracle 11.2.0.1
ASM
Size 1.7T and growing.
I'm rebuilding a standby database and need to use rman because of a few factors. In the past, I did a file copy create a standby control file config init.ora and it always worked.
We have a database and had the stanby build; but someone issued a flashback and corrupted the standby database.
Because of the size 1.7T and growing and we are now using ASM.
My research is only showing building standby through rman using dupicate database command.
I would like to copy the cold backup to a external drive and ship it to the standby site where I'll do the restore. This is because of time and bandwith required to rebuild the standby will interfere with operaitions for the period the files are being copied.
So what would be the high level steps.
1) get the cold backup
2) create the standby control file
3) ship the data via corrier
4) restore the database
5) and this is where i'm not sure. recover the standby control file - but during the restore of the database the "normal" control file will open and perhaps do a checkpoint. therefore the standby controlfile will be usless.
6) recover the standby database.
Has anyone accomplished this?
As much specifics will be helpful. This system is operational and needs to be done right the first time.
thanks,
-RobThank you.
1) I'm going to off load the cold backup to an external drive and have a courier take it to the DR site.
Why, we are replicating the SAN over to the DR site. When SAN replication backs up Oracle becomes non-responsive. Therefore; sending the data over the pipe is not an option for the standby rebuild. Yea' that's the easy way to do it. But this system is operational and critical to operations; so we will not risk saturating the pipe for any period of time. The pipe got saturated one time and it was not pretty.
2) I'm running the test in my lab to make sure I can create the standby database using the cold backup and rman.
3) In the past it was easy; I got a cold backup of the data files using the same ksh scripts that have been working for 20 years. Copy the files over to the standby site, and put it into managed recovery. This technique has been working fine sense Oracle 8i days. ASM through a huge monkey wrench in the ksh script backup and now I'm forced to use rman. Hey, I'm told it's an okay product but when it comes to backups I never get fancy; that just makes things more complicated. Okay I wont complain about asm anymore, i guess there is an advantage in there somewhere.
-Rob -
Problem creating standby database using RMAN
I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukantachannel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M -
Creating standby database using RMAN
When I'm creating standby database with RMAN command
'duplicate for standby' backups for creating standby database
have to be accessible from host where standby database
is created. I can copy the backups to standby host, or use
NFS to share the disk with backups to standby host.
But when I have backups in ASM diskgroup how can
I achieve it would be accessible from standby host?
Thanks a lot for advice,
M.OK, thanks,
I will create standby using Grid, but I have the following problem:
database instance is running on the host where I want
to create standby database. The running instance is for
testing purposes and has the same db_name, db_unique_name, db_domain
parameters as in primary database.
I will change db_unique_name to be distinct from primary database one,
should I also change instance SID not to be the same in
testing database and standby on the same host, or when creating standby
database I can specify distinct one for standby database? -
To create standby database using oracle 10g standared edition
my producation database is oracle 10G standard edition .Can i implement a oracle dataguard or standby database using standard edition licenses.if standby database is possiable in standard edition .what are the steps for creating a standby database using oracle 10g standard edition.
General answer is http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#BABJICBB.
For Data Guard you cannot :
- use instance parameters to automatically send archived redo logs
- use instance parameters to resolve archived redo logs gaps
- create a logical standby
- use SQL statements to do switchover / failover
- use Data Guard Broker. -
Create Standby Database using RMAN changing backuppiece location ID753902.1
[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AMCKPT wrote:
user9198889 wrote:
[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AMHave you restored from the recent backup?
validate the backup compeltion_time and then retry the operation, Are you restoring from tapes?yes its recent backup(last and only backup infact ) , the backup took couple of days to run..
the backup was executing using this command BACKUP INCREMENTAL LEVEL 1 AS COMPRESSED BACKUPSET DATABASE TAG 'LEV1_BCKP_2011-06-27_11_54' PLUS ARCHIVELOG DELETE INPUT
there was no full backup so oracle must have taken full one and not incremental correct?
first logseq that was back's up is : 35818
primary uses local disk for its db and backup
standby that i am trying to create is on asm. i have copied backup to FRA and restored to +data its recovery that is failing now -
How to create standby controlfile from restored backup
Hi Techies,
I am re-building one of my DR server, Source and target DB is oracle 10g.
I have taken the source backup which is going to be restored on target, But I forgot to take a standby controlfile from source DB at the time (Pre/Post) backup.
Now the issue is I can create a standby controlfile on primary and copy the same to target, But so many datafiles are added after the backup which I have taken to restore and medias are already shipped.
I can send the other set of backup to DR site, but it takes a week time and I don't want to do that If I can regenerate it.
So any clue to create standby controlfile on target with restored datafiles?
Regards,
Nick LoyHmm... sounds like you perform this in a rather manual fashion...
Do you use RMAN for taking the backups?
Or maybe the BR*TOOLS?
With these tools you are usually safe from such mistakes - I can only recommend to use them!
However, since you don't have a control file at all on the target side, the only thing left to do would be to
ALTER DATABASE BACKUP CONTROLFILE TO TRACE NORESETLOGS;
on the primary side and manually remove the files that have been added since you took the backup from the control file script,
Afterwards you use the script on the standby side to create the control files.
regards,
Lars -
Creating Standby database using Cloud Control 12C
Hi,
I want to setup Standby database for my existing RAC database, Both standby and PRimary databases are on 11.2.0.3 and we are using "Cloud Control 12C".
After specifing and testing the Host creddential and Database credentials and choosing the Backup method when I click next I get following error message
"Username- The Specified user must own the source database oracle server installation."
I am giving the host credential as oracle, we use single os user "Oracle" for all our installation and administration.
This is AIX OS and 11.2.0.3 database installation.
Any help will be appreciated.
Regards
BhushanGuys,
After searching for 2 days on web and raising question on OTN, in the last we resolved the issue. The issue was registering the primary database with correct oracle binaries.
We have 2 set of binaries Oracle Infrastructure and Oracle RDBMS, The database was register in 12C with Oracle Infrastructure binaries. I changed that and every thing is working soomth.
regards
bhushan -
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
Error while setting up Standby database using Grid Control
I am getting this on grid control 10.2 on windows env while creating standby database using EM. I have checked this folder and it does exists.
any ideas?
C:\oracle\ora10.1\network\admin\listener.ora: java.io.IOException: The system cannot find the path specifiedThere is no problem tnsnames.ora & listener.ora since I am getting the same error for just standby backup also.
this is error on emoms.trc file
2007-07-18 13:19:37,318 [EMUI_13_19_37_/console/database/instance/sitemap] ERROR perf.sitemap setMaintenancePage.1812 - java.sql.SQLException: ORA-00933: SQL command not properly ended
ORA-06512: at "SYSMAN.ECM_UTIL", line 509
ORA-06512: at line 1
java.sql.SQLException: ORA-00933: SQL command not properly ended
ORA-06512: at "SYSMAN.ECM_UTIL", line 509
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:180)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:869)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1153)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3023)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4132)
at oracle.sysman.util.jdbc.PreparedStatementWrapper.execute(PreparedStatementWrapper.java:173)
at oracle.sysman.util.jdbc.CallableStatementWrapper.execute(CallableStatementWrapper.java:135)
at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.getClonableHomes(CloneHomeSql.java:449)
at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.getClonableHomes(CloneHomeSql.java:561)
at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.isHomeClonable(CloneHomeSql.java:363)
at oracle.sysman.db.adm.inst.SitemapController.setMaintenancePage(SitemapController.java:1807)
at oracle.sysman.db.adm.inst.SitemapController.setRequestAttributes(SitemapController.java:1385)
at oracle.sysman.db.adm.BaseController.handleEvent(BaseController.java:1154)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:577)
at oracle.sysman.db.adm.RootController.handleRequest(RootController.java:174)
at oracle.sysman.db.adm.DBControllerResolver.handleRequest(DBControllerResolver.java:114)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
at oracle.sysman.eml.app.Console.doGet(Console.java:318)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
2007-07-18 13:19:42,505 [EMUI_13_19_42_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:44,224 [EMUI_13_19_44_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:46,052 [EMUI_13_19_44_/console/database/dataguard/create] ERROR em.dataguard mapHelpPage.2002 - StandbyUtil.mapHelpPage: dghelp for database/dataguard/createSchedule not mapped to any help ID.. Defaulting to oemdba_consens_data_guard_page
2007-07-18 13:19:47,130 [EMUI_13_19_47_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone createTemplate.379 - TemplateManager.createTemplate(): Exception: java.io.IOException: The system cannot find the path specified
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone submitJobPreparation.3013 - DBCloneObject.submitJobPreparation(): Exception: java.io.IOException: The system cannot find the path specified
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone submitDBCloneJob.3228 - DBCloneObject.submitDBCloneJob(): Exception: The system cannot find the path specified
2007-07-18 13:19:58,006 [EMUI_13_19_58_/console/database/dataguard/create] ERROR em.dataguard onEvent.1038 - CreateConfigController: Exception: oracle.sysman.db.dg.util.VxxStandbyException: The system cannot find the path specified -
Standby database using RMAN.
Hi All,
Please provide me complete steps to create standby database using RMAN.
Regards.http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377
-
How to create standby database by using duplicate
Dear all,
How to create standby database by using duplicate,is there some doc to read?Hi;
You can use
Step-By-Step Guide To Create Physical Standby On Normal File System For ASM Primary using RMAN [ID 838828.1]
Creating Physical Standby using RMAN Duplicate Without Shutting down The Primary [ID 789370.1]
Also use goole, there are many blog-site-dogs mention that topic. From googling:
Creating a Standby Database with Recovery Manager
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm
http://www.pythian.com/news/248/recipes-for-creating-a-managed-standby-with-rman/
http://docs.oracle.com/cd/B19306_01/server.102/b14239/rcmbackp.htm
Regard
Helios -
Error while creating physical standby database using Oracle Grid 10.2.0.5
Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
ns main err code: 12533
TNS-12533: TNS:illegal ADDRESS parameters
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan
Maybe you are looking for
-
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
-
Adobe Acroat 8 Pro & Windows 7 (64-bit)
I have gotten a new computer that is running Win7 64-bit. I have a copy of Adobe Acrobat 8 Pro that I'm trying to get to work on the new system. During the install process, it brought up an error asking for the Windows Vista adobepdf.dll file. Since
-
how can i update my iphone to connect to tomtom or get features to connect ?
-
Read only checkboxes in tables still seem to be clickable.
I know there is also "disabled" for check boxes, but then the thing is hardly readable. Is there any way to make it readable, but not clickable? Or should I switch to 'Y' and 'N'?
-
I just installed arch, and I got these errors in errors.log Apr 1 19:44:01 localhost dhcpcd[467]: eth0: sendmsg: Cannot assign requested address Apr 1 19:44:07 localhost kdm_greet[521]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such f