Create sub folders in "local" - Map a network drive.

I am using Docs2Go and when I save a document, a see an option to save on "local"; thats where I save them. finding these documents is becoming difficult. How can I create sub folders in local disk so that documents can be organised.
Secondly, after connecting through VPN, Can I map a network shared drive.

Can't be done.

Similar Messages

Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.

Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh

HT201320 Does my email service provider have to provide the ability for me to create an IMAP email account in order for me to create Sub-folders within Apple Mail?

Hi, Apple Mail provides a function to create sub-folders within my mailbox so that I can group emails of similar subjects or from the same sender. My service provider only provides POP email protocol and the New Folder button does not appear in my Apple Mail account for that service provider. Icloud provides the opportunity for the iPad user to select between POP and IMAP. I can select IMAP and the New Folder button appears allowing me to create sub-folders within the icloud email account. Does this mean I cannot create sub-folders in my email account unless my service provider provides customers with the option of creating an IMAP email account?
This appears to be a problem for quite a few Apple Mail users, but service providers appear reticent to provide a response other than 'use Microsoft Exchange / Hotmail, Google GMail, or some other third party email service provider'. This is why I have chosen icloud as my email service provider. It is Apple and therefore Apple supports it. I have been a Telstra customer for over 15 years and they informed me today, strongly, that they support their own products and services, not Apple products, even though Telstra sell them. When I asked the Telstra Customer Support Manager whether they support Telstra customers, I was informed 'no, because the Telstra customer is not a Telstra product or service'. I have since cancelled my Telstra email account and am in the process of cancelling all of my Telstra services.

Apple Sceptic wrote:
Does this mean I cannot create sub-folders in my email account unless my service provider provides customers with the option of creating an IMAP email account?
Yes. That is what it means. You need an IMAP account in order to create sub folders on the iPad.

When importing photos it always creates sub folders. I do NOT want that.

How do I stop it from creating sub folders every time I import photos?

Have a look at thei video on importing: http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-5/lightroom-5-imp orting-your-images/

One user can not map a network drive

Hi,
A costumer of mine is trying to map a network drive for an existing user that has always had access to the NSS6000 Network Storage Device. This still works for all other users except this one. It looks like an authentication failure. They connect thru CFIS (which means it's using the active directory).
So far i have troubleshooted the following and ran out of options half an hour ago.
I rebooted the NAS. No luck.
I made a different folder and gave the user access. And tried to connect to that. No luck. (to confirm its not related to the folder security)
I tried to map the drive on a different computer. No luck. (to confirm its not a local computer problem)
I tried to map the drive to another folder on a different server, this worked fine. (to confirm credentials are correct).
I tried to remove the user on the NSS600 and tried to update it. The user reappeared instantly in the user list on the NAS. No luck.
I fear the user table the NSS keeps is corrupted. And i can't find a way to force the NAS to recreate it based on current folder security or active directory users.
Please help, as i am in no mood to reconfigure the entire NAS.
Kind regards,
Tim Sars

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

I can not map a network drive in window 8.1 under VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

How can I map a network drive on an iPad once a VPN is established?

I have a new iPad and I am trying to access a network drive once I establish a VPN on my company's network. I can establish the VPN, but I am not sure of how to map a network drive like I do on my MacBook using smb.

Not true. You can use the app NetPortal https://itunes.apple.com/us/app/netportal-access-files-on/id323133602?mt=8
Does exactly what you want. There's a free version, netportal lite, that does the same thing but only lets you access PDFs. Try downloading the free version first to see if you are able to get connected. I was able to easily on first try once I establised my VPN, ran this app, and entered in the local IP address, username, and password.

I can't map a network drive from Windows 7, using the exact same settings that work fine with Vista or XP

I have Windows 7 64 bit Home Premium,and I can't map a network drive. I use a Cisco VPN client to connect to my University network, and then when I go to map the drive I get a message that it can't be found. I have done web research it seems that I am unable to edit the local security settings (apparently you can do this in Ultimate and Professional versions), and that this may be the culprit. Does Microsoft make some patch available? My IT people, and the tech help at HP are baffled by this. If Windows 7 Home Premium does not allow for mapping of network drives, then I'm dumping it and returning to Vista. Has anybody had similar problems?

Day 2 of trying to map a drive in Windows 7 Professional:
My journey to ____..
Begins:
I purchased Windows 7 Home 3xuser license pack for ~140 US I kep hearing friend sayhow much faster it was than Vista 32bit so I thought hey let’s “upgrade”
.. I looked up the definition of the word “upgrade” the following is what I found:
1.
To exchange a possession for one of greater value or quality; trade up.
2.
Computer Science
To replace software or hardware with an upgrade.
3.
Computer Science
a.
To replace (a software program) with a more recently released, enhanced version.
b.
To replace (a hardware device) with one that provides better performance.
So we,re all clear on what an upgrade is suppose to be. I wanted tomake sure I understood before I proceeded.
I installed a copy on my latptop Toshiba Centrino 1.83 Ghz/3 G Ram decent computer for all intent and purposes. It’s been working fine
on Vista but running slow. So I went through MS “requirements checking” to determine if my computer passed the MS test and worth of such the honor and also get MS’s blessing before I moved forward with the “upgrade”.
I proceeded with the upgrade went relatively smoothly had to uninstall a few programs but I figure that’s such a
small price to pay for such great enhancement that I will receive from my “upgrade”. Approximately 4 to 5 hours later after minimal reboots I was all set to go with my new upgraded OS. It was working as prescribed faster than Vista cleaner
interface sorta, helpful little taskbar gadgets. I was stoked that night I went to be thinking I will go to work and be a rock star on my brand newly “upgraded” computer.
Oh and by the way, I was so thrilled about Windows 7 I even upgrade my home computer as well.
I go into work and I have a very big user migration that night, I am an network engineer and I use my laptop for work I use Visio, Wireshark
and others, all the tools that help us do our job efficiently and effectively.
I sit down turn on my computer it boots faster than Vista and I’m just chomping at the bit to get going have lots of work to do. So let
go back for a minute an look at the definition of “upgrade”
“3.
Computer Science
a.
To replace (a software program) with a more recently released,
enhanced version.
b.
To replace (a hardware device) with one that provides
better performance.”
So were good on what upgrade is?
I have my computer up I have logged in (locally) not on a domain as I was not when I was on Vista OS. I wanted to attach the server to get some
files so I go to map a drive………………. Hmmmph ….. that’s weird I cannot map a drive …… let’s try this again……… hmmmph…. what this domain thing going here I
never need that before in the lesser product Vista but ok I’ll add my
\\servername\folder and my domain.org\username..... hit enter and hmmmmmph …. It ask me for my password again.. well I could have fat gingered it so I’ll type it in reallllllllly slow.. hmmmmmmph ….. again no such luck…
So I decide consult a colleague of mine who recommended I “upgrade” to Windows 7. After speaking with me he tells me oh! You need
Windows 7 Professional to do the same things you did in Vista home … I’m perplexed by this but let’s once more take a look at the word “upgrade” to “enhance
and/or make better
”. So now I’m a little perturbed by this little bit of information but I suck it up and decide I’ll drop another ~100.00 US on an “upgrade” to Professional small price to pay for such a great product.. I mean have
you seen those commercial WOW!
I make my purchase download and once “upgrade” to new “upgrade” with even more improvement over Vista and XP I mean
with those two OS’s it took me all of 5 second to map a drive SURELY Windows 7 Professional will map a drive like no one business.
After
few reboots my computer has been fully “upgraded” and ‘upgrade” again to W7 Pro and I’m off to the races ready to get to work cause my migration will be starting in a few hours and I want to be prepared. Sytsem reboots quickly
I’m logged and ready to start getting my information I so desperately need. I go to map my drive I figure I’ll help W7Pro out I’ll be proactive and use “domain.org\username” that way W7Pro
will like me and think oh! this man is brilliant. I hit enter with my correct password that I type realllllly slow. …… waited it’s thinking for sure this is it .. the anticipation is killing me the excitement is overwhelming …….
THUD my world just came crashing down ..no luck .. no login ..no mapping drives…I’m now on hour 6 of this ridiculous journey to the “upgrade” to “upgrade” ____. So now I’m left to forum because MS surely does not
think I am going to pay them $275.00 and hour for support on something that should have work right out of the box.
So I’m on day to I have tried everything on this forum page to get my mapped drive to work with nothing working for me. It appears that
if I want to use my computer I will have to rolled back to the lesser (Vista).
Just in case you’re wondering how I made it through the user migration. I had my co-worker bring me my XP computer worked like it’s
was suppose to.

Use thinkvantage access connections to map a network drive

Is it possible to use thinkvantage access connections to map a network drive. I have three different basic sites (home, work1, work2) with network drives that I would like to access depending on the site.
1) I wonder if it is possible to configure thinkvantage access connections to automatically map the network resources through a connection profile?
2) I wonder if it is possible to configure thinkvantage access connections to automatically map the network resources through a connection profile that is based on vpn connection?
thanks in advance
sincerely, anders

Hi,
directly it's not possible for Access Connection to reconfigure your network drives.
However, there is one really cool part of Access Connection, that might be realy suitable for your situation. This part is the script/application, that can be executed when a profile gets applied.
So for your situation I can imagine, that you create a .bat file, that contains something like this:
net use * /DELETE /YES
net use Z: \\computer name\share name
The first part will delete all maped drives. The second part will establish connection that you want to use. Of course you can multiply the last part, so that you can configure multiple connections.
Please let me know, if this helps.
Cheers

Error 0x800704b3 when trying to map a network drive

Hi there,
I have the following error when trying to map a network drive in my home network:
"\\iomegahmd can not be reached" and the error code is 0x800704b3.
I already looked into the services, and my strong assumption is that the problem is that the service "TCP/IP NetBIOS Helper" is not statrted and it is disabled. When I try to start it, there is an error message:
"The system could not find the path specified".
I've also checked the dependency components of the service "TCP/IP NetBIOS Helper":
Ancillary Function Driver for Winsock
NetBT
TCP/IP-Protocol driver
NetIO-Legacy-TDI Support driver
in the device manager if they are running, but they are all running. The start is set to "System".
Under the TCP/IP Internet version 4 properties of the wireless device, under Advanced -> WINS Ive set Enable NetBIOS over TCP/IP, but it didnt help either.
What else could I try, so that I can map network drives?
I should also mention, that the problem persist since some week ago. Before it, it was properly functioning. Also, on the other computers in my networks I do not have problem accessing the same network drive.
Thanks in advance,
Dime

> I should also mention, that the problem persist since some week ago. Before it, it was properly functioning.
Its difficult to say whats wrong in your case. My first idea is: set the system to early time point before this error appeared.
I would also recommend to disable all the security software and check if you come across the same problem.
If you still face the issue, then follow the link to fix the corrupted user profile.
http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

Windows 7 (Client) map a network drive VPN Snow Leopard Server

Hi,
I have a Mac Mini Snow Leopard Server and are using a VPN service.
My services on the mac os x sls server are: AFP, DNS, Firewall, Open Directory, SMB and VPN.
I can connect the VPN from Mac clients and Windows 7 clients, but I can only map a network drive/share point on Mac´s.
On Windows 7 I get an error: path or name not found ( I am sure using the correct path, same from Mac client that works).
When I am using my internal network LAN I can map a network drive using Windows 7 and Mac but outside over a VPN not (only Mac works).
The only service, at this moment, that I need is File Sharing outside my network LAN using a VPN.
How can I map a network drive from a Windows 7 client using a VPN, is there any Firewall rules / SMB rules / File Sharing rules that I missed on the server side?
Thank You.

I really don't know what are going wrong with my settings. As you said/write it must be an easy setup.
I'm using a Time Capsule and used the Server app to add VPN to the port forwarding also.
When I am connected thru the VPN I tried to ping the Server IP and got no answer from it, from W7 client!?
My Mac's are just working fine with AFP and SMB share points thru the VPN.
I think I have missed some settings from the SMB or Firewall services for VPN with W7 client's or it is a Windows issue.....

Workstation not mapping any network drives

Im having an issue with different workstation not mapping any network drives. The issue to would seem totally random. Each time is over a wired connection. I havent been able to find a TID about this. The issue also just seems to have started, however no changes have been made to any of the workstations Ive seen this on. The errors I get in the login script are below. The servers are all NetWare 6.5SP7. Suggestions?
LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 15 (8819).
LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 13 (8819).
LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 9 (8819).
LOGIN-LGNWNT32.DLL-918: This utility was unable to get connection information. Error code: 8801

Hi,
technomoney wrote:
>
> Im having an issue with different workstation not mapping any network
> drives. The issue to would seem totally random. Each time is over a
> wired connection. I havent been able to find a TID about this. The
> issue also just seems to have started, however no changes have been made
> to any of the workstations Ive seen this on. The errors I get in the
> login script are below. The servers are all NetWare 6.5SP7.
> Suggestions?
>
> > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 15 (8819).
> > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 13 (8819).
> > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 9 (8819).
> > LOGIN-LGNWNT32.DLL-918: This utility was unable to get connection
> > information. Error code: 8801
Basic network connectivity issue. One known common culprit for this
error is a workstation firewall, but the raw symptom just means that
unexpected network connectivity problems occured.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

LabVIEW for Mapping of Network Drives with Error Handling

Is there a way to do the following easily in LabVIEW?
- List drive letters and network paths of existing mapped drives on host PC
- Check if a desired mapped drive is connected and if its disconnected reconnect to it
- Receive related errors that may occur during attempting a connection to a mapped drive (i.e. path cannot be found, etc...)
I know how to do most of this in VBScript but I'd like to avoid having ANY code for the work I'm doing be "non-G"!
Thanks for your time!

Hello Ray,
You may want to take a look at the following Knowledgbase articles on NI.com
How Does LabVIEW Find Which Disk Drives Are in My Computer?
http://digital.ni.com/public.nsf/websearch/9DFF8F1788A7171A86256D10003776C0?OpenDocument
How Can I Programmatically Map a Network Drive in LabVIEW on a Windows 2000/XP Machine?
http://digital.ni.com/public.nsf/websearch/313C5E597B48652F86256D2700674EDB?OpenDocument
Best Regards,
Chris J

AnyConnect VPN and mapping a network drives

How this can be done? I want to map few network drives from fileserver after the VPN connection is opened. I have seen before that this can be done via AnyConnect. Examples?

You have an option to run scripts after some actions (connect, disconnect from VPN).
Read more here:
http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/b_AnyConnect_Administrator_Guide_chapter_011.html#ID-1408-00000396
Dont havy any examples myself right now.

How can I map a network drive so that it is persistent?

When I use my PB at work, I need to connect to a network drive. Is there a way to map to this drive sutomatically when I boot up at work but not give me any problems when I boot up at home.

Are you connecting to a Windows-based network drive? If so, I can't remember the exact procedure because I've found it actually more difficult to "map to network drive" with PCs.
For the Mac, what I've done is, to save headaches, is made a shortcut to my networked drive on my Dock.
First, in the File menu:
GO > Connect to Server > Browse > (find your networked drive)
Second, double click on your choice, and what should come up is a new dialog box that says "Connect to Server" with the choice to connect as "Guest" or "Registered User."
Choose "Registered User" type in your login name and password, and click the checkbox for "Remember password in keychain" and then click on the CONNECT button.
Third, if successful, when the drive mounts, drag that to your dock and leave it there.
Then you can access your networked drive any time without having to re-enter your name and password every time. So as long as you did it right.
I don't recommend putting it in your Login Items because it can cause system hangups if for some reason, you aren't connected to your network when you startup. It will hang and search for that drive forever. ("Forever").
Trust me on that part. I've wasted precious time in most cases, waiting for the PowerBook to search for a drive that is not connected.
Also, you can put your networked drive in your "Favorite Servers" section by clicking on the "+" sign with the drive's address typed in. That way you also don't have to find it all the time.
But do the previous tip and you should be fine.
That is, if you are on a Mac to Mac network. I gave up trying to access the PC network because it kept reassigning the IP address and would never remember where it was.
(That's how I got those hangups at startup).

Create sub folders in "local" - Map a network drive.

Similar Messages

Maybe you are looking for