Create subnumber for asset

Hi
I created asset 10058 in T.code AS01. But when I create subnumber for asset 10058, it notice error:
"Main asset number 10058 does not exist
Message no. AA178
Diagnosis
Main asset number 10058 does not exist.
System Response
The system cannot find the ANLH record for this main number.
Procedure
Enter an existing main asset number or choose an asset using the asset matchcode to help you"
Please help me to fix that error
Thanks&Regards
Ngocpt

Dear,
The system cannot find the ANLH record for this main number.
ANLH - Main asset number is a table in SAP which contains main numbers of assets per company code.
Since the creation and assigning of assets in SAP system is done by FI part, I suggest to contact FI consultant in your business to define / create / update the ANLH table.
Regards,
Syed Hussain.

Similar Messages

Create subnumber for asset which already has book value RM1.

Hi everybody,
Can i create subnumber for asset which has been depreciated until RM1 book value ? This asset has a few quantity and need to be breakdown to different cost center ? If yes, how ? AS11 or AS94 ?

Hi,
Thanks Andreas. However, the asset is an old asset (already reached RM1 book value). I have tried to use AS94, but hits an error " Legacy data transfer year is not last closed fiscal year 2007". FYI the take over date in the system is 31/3/1998 while closed fiscal year is 2006. Now we are in fiscal year 2007 (Apr to Mac). If i were to change the take over date to become 31/3/2007, is there any impact to the depreciation run for other assets in the system. I'm worried if i change the take over date, the depreciation will get haywired.

Error while creating PO for Asset is investment measure

Hi All,
I am getting error when I try to create PO for Asset which is investment measure.
Error is as below:-
Asset is investment measure, transaction type not allowed
Message no. AK005
Diagnosis
Asset 305000003 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
Procedure
Check the asset and transaction type 120.
I am using account assigment catergory 'A' in PO. I have checked Allowed transaction type for Acquisition and 120 is already allowed.
Please guide.

Hi,
Try to create PO with account assignment category as P/N for project related ones.
If the related asset is related to Investment Measure we need to settle transactions to WBS element and from WBS element to AUC. We cannot directly post to AUC.
Thanks and Regards,
padmaja

Creating Thumbnail for asset FAIL

Hi!
We recently installed FCS and have begun to do some testing. We have "Edit Proxies" enabled. When we upload small FCP projects everything works fine and edit proxies are created. If we upload a FCP project with large media files, Final Cut server seems to be trying to create the Thumbnail for the large media file before it has uploaded to the server. This creates an error (FAIL) in the Search all jobs window. After that, FCS doesn't attempt to create either Edit proxy or Clip proxy for that file. It moves on to the next media file in the FCP project. If this is a small file, FCS successfully creates proxies for that file. Anybody that can give us some help with this?
Thanks in advance
Patrik

Verify that you can actually open the files in Quicktime on the Mac running the Final Cut Server (Server Software). Do this by logging on via Apple Remote Desktop, Screen Sharing, or via the KVM switch if your system is in a server room.
If you can successfully open/read/playback the Decklink codecs directly off the server then you can eliminate that. I would then try to transcode the file using the copy of Compressor that's on the FCSvr, this will simulate a proxy encode.

Release Strategy for Asset Purchase order

Hi,
I have the following client Requirement.
1. PO document type will be anything but Po created is for Asset
2. In such case, Release strategy should be approved only be certain groups only. Anyway the Account assignment category will be "A"
As we cannot control the PO Release by Account Assignment category, it has to be controlled via User Exit.
I.e., combination of Acc Assignment category and Purchasing Group should result in a particular strategy.
Can you suggest relevant user exit? This is importantly needed. Please help.
Thanks

Hi,
Please do the following changes,same is tested by me in Our dev server and works successfully in PO.
Go to Se11 ,open structures -CEKKO (You will find KNTTP-account assignment field is missing)
Click on append structures ,system will ask you object name ,give as anything,then put a description /
Then system will ask you to add new field in CEKKO structures.
Add field KNTTP and save ,system will generate request for the same.
Now create a characteristic as CEKKO_KNTTP and save ,don't give table name here
Once saved,re-open the CEKKO_KNTTP ,here you need to give table name as CEKKO and field name-KNTTP. Define values an save.
then add the same in class ,and then select the required assignment in CL20N ,save.
And check the PO effects,it will works.
Regards,
Sandesh Sawant

While creating PO for Low value assets error

Hi Seniors,
When user creating PO for low value assets ,system throwing error as
u201CMaximum Low value amount exceeded in the case of at least one asset .u201D
Details about this issue:
1.User creating ONE PO for 8 assets as 8 line items, each line item
value below 5,000 only.
2.In this year only they created 8 new asset master records with ref to
Particular asset class(below 5,000) asset class.
3.Non Taxable item P0 (p zero).
Checked:
1. checked at AW01N, no values in each asset.
In configuration:
2. at OAYK   Specify amount for Low value assets,
   Value is 5,000 rs
3. at OAY2 selected option is u201CCheck maximum amount with qtyu201D
I created POu2019S for below 2 options
1   Value based maximum amount check
2   Check maximum amount with quantity
But same error.
Note:
In development server i created some POu2019s like user creating in
Production server but no error in Dev server,
Plz guide me.
Thanks in advance

Hi,
I think you are using a single asset master record in all your line items in the PO.
If you use individual asset master record for each line item in the PO, you issue might solve.
Post again for further queries.
Thanks,
Srinu.

Not able to created Number Ranges for Asset Classes in AS08

Dear Friends,
I am not able create Number Ranges for Asset Classes in AS08.
It is giving me an error message as company code does not exist.
When I Check Consistency under path SPRO -> Financial Accounting -> Asset Accounting -> Preparing for Production Startup -> Check Consistency -> Overview Report: Company Codes. I am getting the following
RSOL Reliance Sealink One PLtd
CoCode no. alloc.    NKTR
Fiscal Year Variant V3   Apr.- March, 4 special periods
Start 2nd half month 00
Transfer date        31.03.2006
Chart of dep.        TOLL Chart of Depreciation - For Highway Projects
Net worth tax        01   Book depreciation as per Compinies Act 1956
Enter net book value
Status company code 2
Current fiscal year 2007
Doc. type dep. pstng AF   Dep. postings
> Number range &1 in co.code &2 for doc.type &3 must be defined as internal
Calc.insur.value
Input tax exempt
If you see the above first two line you will find the difference is that Company code RSOL in the first line and NKTR company code in the second line.
Actually CoCode no. alloc. has been wrongly copied as NKTR while copying CoCode it should be RSOL and not NKTR.
I think because of this wrong allocation it is giving me an error in AS08. Also it is not showing me CoCode in drop down list in AS08.
Please help me to resolve the problem.
Thanks
Rahul Jain

Look in TC OAOB if the company code is assigned to a chart of depreciation

Posting not possible in Purchase Order created for Asset.

Hi All
I have created a Purchase Order for Asset. While making down payment for the same through f-48, I am not able to post the same. How I will take care of this?
Please guide how to make the posting.....
Thanks
Ruby

Hi,
your question is not clear. There are two possibiliteis-
1. you are making the payment with reference to PO. In this case enter PO number and the line item number in po in option Purcgase doc.
2.You are making the down payment against the asset. In this case you need to configure in AO90 the DP Accounts. And put the asset number in f-48 while entering the data.
Regards

Which table contains net book value for Assets created with AS91.

Which table contains net book value for Assets created with AS91.
I have a problem locating where the net book value is stored in SAP. Is it simply calculated and not stored in any one place? I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on. If it is stored in a table some place, can anyone please let me know!
Thank you all

Hi anar.samadzade & Michael Stewart
It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
Gross Block & Accumulate Dep you will get from Table: ANLC
http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
Dear anar.samadzade Ask Questions politely
Regards
Viswa

Error when creating a bdc for asset master upload

I am getting a warning message (AA186), when changing the depreciation start date to capitalization date. It says,
"Different Order Dep. start date in depreciation area 01. Check"
This error is a problem in creating the BDC for asset master upload. We have only one depreciaton area 01 (book dep).
Please help.

This is normal message you get when you try to change depn start date. I think this should not be a problem for BDC posting. This message can always be bypassed.

Creating locations for the assets in Asset accounting

Hi,
Can anyone please let me know how to create locations for the existing assets in AA module? We need to create locations and assign the assets so as to track the assets location wise.
Thanks,

Goto
SPRO-->Enterprise structure->Definition-->Logistic General->Define Location
there you can create location

Create a completed asset for wbs element

When I create a completed asset for a wbs element in transaction cj02 (Extras--> Create completed asset)i have a screen layout rules that i don´t want. Anybody knows if Is it possible to change these rules?
Thank you very much in advance.

Hi..
Are you referring to Asset master data screen layout...if yes then you can change it here
SPROIMGFinancial Accounting -
Asset Accounting -
Master Data -
Screen Layout -
Define Screen Layout for Asset Master Data.
Assign points if useful
Regards
Aravind

LSMW for Asset Data (Tcode-AS01)

Hello All,
I am working on LSMW for Asset master data creation for transaction AS01. When i go to tcode AS01 there is a field with description called "NUMBER OF SIMILAR ASSETS". The LSMW program for the asset data uses two structures BALTD and BALTB. But the field description field is not available in these stuctures. So i am not able to create asset data through t code AS01.
Can anybody help me out. I will reward you with points.
Thanks,

Hi,
The number of similar assets
enables you to create multiple similar assets in one master transaction. These assets initially differ from each other only by their main and/or sub-number. When you save, you can also enter a description and inventory number for each individual master record.
This function does not allow you to create multiple assets that automatically have the same long text.
In order to work with lsmw you are creating asset in reference to old asset number/subnumber. i think the default number of assets are 1. in case you require more assets to be created of same type you may have to pass different long texts.
Reward if find useful.

Error while creating a new asset in BCC.

Getting below errors while creating a new asset(catalog/category) through BCC. I have imported the required data from CIM and install.bat from BIZUI.
/atg/dynamo/servlet/sessiontracking/GenericSessionManager/KDzDSgGcJTS9nwvGpkr9wpyz4nnGKWPYs4QFFJ87Q1BjrTSd4JTG!1759330809!1386235100684
atg.web.viewmapping.ItemMappingException: Invalid Mapping Mode: AssetManager.default
[Flex Messaging] 12/05/2013 14:50:45.486 [ERROR] [Message.Remoting] Error processing remote invocation: atg.flex.service.RemoteOperationException: java.lang.NullPointerException
Kindly suggest...

As u imported data from CIM for production and publishing(assuming u imported for both), There is no need to run BIZUI.bat mannually, CIM runs this.
Coming to ur error:
From the logs it seems that following mapMode is missing, It's OOTB and should have been loaded while Viewmapping repository data load.
<add-item item-descriptor="mapMode" id="AmMmDef">
<set-property name="name"><![CDATA[AssetManager.default]]></set-property>
</add-item>
I think there must have been problems during CIM data for publishing environment loading and because of that viemmapping is not loaded properly.
Refer to this post for initial data load : Re: ATG ENVIRONMENT SETUP ISSUE
Let us know if u didn't load publishing using CIM, there is some manual work required to load some repository.
Thanks,
Nitin.

Downpayment Request for asset

Hi
I am new to Asset accounting. I have a problem which says likes this at the time of a Down payment request creation:
Message no. F5378
The asset number assigned in the purchase document
is different from the asset number entered manually
cannot be transferred, because the 'Asset number' field was hidden for the account in question
System Response
In the first instance a warning appears, drawing your attention to the different account assignments. In the second instance an error message appears, because the asset number must be transferred from the purchase order but the necessary field is hidden.
Procedure
If you receive the warning, check which asset number is the correct number for this down payment.
If you receive an error message, you must either choose another special G/L indicator for down payments so that it is possible to assign an asset number to the relevant general ledger account, or you must change or delete the the specified purchase document number. Only those purchase documents are allowed which are not assigned to assets
How can I solve this issue ?
Regards,

hi,
Pls follow some point:
Complete the Fixed Asset acquisition process from a Payment.
Define the process from Payment to Fixed Asset Acquisition document to Fixed Asset Registry.
Manage and process the Fixed Asset Shell.
Summary of Steps:
Payment Processed via PRC
Payment Disbursed in nightly batch
Fixed Asset Shell Created in a weekly Bach (currently after AD/EFT date reached)
Department Monitors Fixed Asset Shells from Fixed Asset Payment Request (FAPR) Table.
Departments update FA Shell with appropriate information to Fixed Asset Document
Fixed Asset Shell Defined:
The Fixed Asset Shell is a Fixed Asset Acquisition document that has been automatically generated by MMARS after an eligible payment and disbursement have been completed. It is used to record, better or increase the value of a Fixed Asset. Departments will manage the Fixed Asset Shells via the FAPR table. After processing the Fixed Asset Acquisition document information is updated in the Fixed Asset Registry.
To create a Fixed Asset Shell the Commodity and Unit Price must match or exceed the Fixed Asset Shell threshold settings defined for each fixed asset eligible Commodity Code. These threshold settings are stored in the Commodity FA Threshold (COMMFA) table in MMARS and sorted by Commodity Code.
Fixed Asset Document Structure:
Notes:
Step 1 - From the Home Page
u Click Search
v Click Page Search
v
u
Step 2 - From the Page Search
Open the Fixed Asset Payment Request Table (FAPR)
uType [FAPR] in the Page Code field.
vClick Browse Link
v
u
Step 3 - From the Page Search
uClick Fixed Asset Payment Request Link
u
Step 4 - From the FAPR Table
uClick Search Link
u
Step 5 - From the FAPR Search Box
Filter the contents of the FAPR table to view just your Departmentu2019s Payment Request (PRC) documents.
uType [3 Letter Department Code] in Doc Dept Field
Add any other known search criteria to filter the search
vClick OK Link
v
u
Step 6 - From the FAPR u2013 PRC Grid
u Select the PRC Document ID from the grid
Checkmark on the row notes this is the active row, this data is shown on the scalar.
vClick Generated Shell Details Link
u
v
Step 7 - From the PRC Generated Shell Details
To access the Fixed Asset document associated with this PRC.
uClick the FA Document Number Link
u
Step 8 - From the FA document
uClick the Edit button at the bottom of the page.
u
Step 9 - From the FA Header
Update the FA document.
uCheck the Auto Generate FA Number field
Define the Prefix of the Fixed Asset Number. This will be the Prefix added to the Fixed Asset Number. The prefix is the Fixed Asset Type of the base component.
The choices are:
B - Building
C - Construction in Progress
E - Equipment Other than H, K or V
H - Landmarks/Monuments/Artwork
I - Infrastructure
K - Computers/Software/Cabling
L - Land
V - Vehicles u2013 Air/Land/Water
S u2013 Computer Software over $1million
vType [Prefix] in the Prefix field
wType [Fixed Asset Description]-Departments should be as descriptive as possible to distinguish the asset in the Fixed Asset Description field
x Keep Event Type FA01 (Acquire a FA) if Applicable, otherwise update
yClick Responsibility Center Link
y
x
w
v
u
Step 10 - From the Header Section u2013 Responsibility Center Sub Section
uType [3 Letter Department Code] in Department Field (or click pick list to select)
vType [4 Digit Unit Code] in Unit Field (or click pick list to select)
wClick Component Link
w
v
u
The FA document has the following structure:
This is the component line of the FA document. Accounting lines are associated with the component and there could be multiple accounting lines associated with this component.
Step 11 - From the Component Section
uClick Component General Information
u
Step 12 - From the Component Section
From the Component General Information sub-section
uType [component number] in the component number field. For original acquisitions the suggestion would be u201C0001u201D
Note: The Comm Code and units is inferred from the PRC
Step 13 - From the Component Section u2013 Acquisition Details Sub Section
uType [Acquisition Method Code] in the Acquisition Method field (or click the Pick List Arrow to select)
the acquisition detail
vClick Component Location Details Link
v
u
Step 14 - From the Component Section u2013 Component Location Details Sub Section
uType [Location Code] in the Location field (or click the Pick List Arrow to select)
vClick Component Classification Link
v
u
Step 15 - From the Component Section u2013 Component Classification Sub Section
Step 15 - From the Component Section u2013 Component Location Details Sub Section
uKeep the default [Normal] value in the Fixed Asset Classification field. This notes a Shell generated fixed asset documents.
vType [Fixed Asset Catalog Code] in the Fixed Asset Catalog field (or click the Pick List Arrow to select)
Note: the Fixed Asset catalog is sorted by Fixed Asset type. Departments should filter their search by asset type criteria
wClick in Depreciation Structure field and choose from the drop down arrow u201CResponsibility center exception Land/CIP Asset Type N/Au201D
xClick Accounting Link
Note: The following are inferred from the F/A catalog: type, group and useful life; depreciation method
w
x
v
u
Step 15 - From the Accounting Section
uClick Expand All Arrow
Note that all of the Accounting information has been populated based on the FAPR table. No additional information needs to be entered here.
vClick Validate Action Button at the bottom of the Page u2013 check for errors
wClick Submit Action Button at the bottom of the Page
xClick Close Action Button at the bottom of the Page
After Validate and Submit the information is updated in the Fixed Asset Registry Tables, where the current fixed asset information is stored.
x
w
v
u
Rohit Agrawal

Create subnumber for asset

Similar Messages

Maybe you are looking for