Create Support Message from external system
HI experts,
I would like to change the Create Support Message screen(Menu->Help->Create Support Message) and add three fields namely: Category, Subject and Solution Number because currently these fields are not populated in the Service desk if I create message in this way unlike in using NOTIF_CREATE tcode where there are selection fields for these.
Also, I'm creating the support message from an external SAP system and the messsage is sent to the Solution Manager system. The NOTIF_CREATE tcode does not exist in the external system as well as the whole package DSWP.
Please let me know you rthoughts on this.
Thanks
Eric
Hi guys,
Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
As you will notice, there are lots of standard objects that I've changed. =)
My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
Thanks,
Eric
Similar Messages
-
Roles required to create support message from satellite system
Hi Team,
I am trying to create support message from satellite system. i have assigned S_RFC and S_RFCACL to the Zrole. Apart from that, is there any other roles to be assined in satelite system to create support message?
Regards
KumarI think that's it.
Of course they roles in the central system too: SAP_SV_FDB_NOTIF_BC_ADMIN and SAP_SUPPDESK_CREATE (or copies thereof).
Regards,
Sean -
Creating Support Messages from Satellite System without SolMan user account
Hi
We are having some problems with users "creating support message" from our ECC system to SolMan, if the user does not have a user account in Solution Manager.
It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
Regards
LarsHi,
you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
With this TA, it is easy to create BP for each satellite system.
Best regards
Marc -
Create Support Message from satellite system
Hi, when I create a ticket using "Help - Create support Message" the parameter SY-UNAME is not passed to Service Desk
in other word, the message is created but the field "Reported by" is not filled.
if I want to display the entire message in the form, before saving, I can see that this value is correct...
SY-SYSID DE1
SY-MANDT 300
SY-UNAME SOLMAN
SY-DATUM 20080410
etc.
Any suggestion ?
Regards,
Nacho.Hi,
1) Under identification tab in external BP no. put details as
<Server short name>space<client>space<search term
(which you have maintained in address tab or employee no.
of that user in satellite system)>
2) In ID type put CRM001
3) Under identification put details as <Server short
name>space<installation no.>space<client>space<search
term (which you have maintained in address tab or
employee no. of that user in satellite system)>
4)Go to trns. BP>select BP role as "Employee"> Indentification tab--> Maintain user name same as user id of employee in satellite system or serch term you maintained while creating BP.
Try this. Reward the points for useful answer.
Regards,
Niks -
With SP16-17 we can't create support message from satellite system anymore
hello,
We have implemented the support package 16 and 17 SAPKITL427 in solution manager last week-end and since then all satellite systems can not create support message anymore.
The process is perfectly working in solman itself and we don't think we have thus a process customizing issue here but who knows...
The key user creates the message with the help -> create support message
and when he saves it (clicking the mailbox button) he gets the following error
Error in Local Message System: Function not available Message was Not
Created
In fact the error Message is BCOS088
We debugged the function BCOS_CREATE_MSG and we found out that the function
DNO_OW_CREATE_NOTIFICATION is returning error code 1.
We checked out RFC connection and it looks ok
There is no dumps in ST22, no error in SLG1 in both system...a nightmare
The notification SLF1 is created in solman but the status field of the notification is empty and it looks that the record is somehow corrupted because you can't modify it with dnotifwl.
Due to the fact that the notification is not correctly created the support message is also not created.
SAP and our solman consultant are working on it since 2 days but don't have a clue. Maybe some program where no regenerated correctly ?
If you would have any idea in which direction to look, i would greatly appreciate
thanks a lot
best regards Xavierhi Rohit,
on the satellit I have the following versions
SAP_BASIS 700 0012 SAPKB70012 SAP Basis Component
SAP_ABA 700 0012 SAPKA70012 Cross-Application Component
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C PI_BASIS 2005_1_700
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-In
SAP_BW 700 0013 SAPKW70013 SAP NetWeaver BI 7.0
SAP_AP 700 0009 SAPKNA7009 SAP Application Platform
SAP_HR 600 0018 SAPKE60018 Human Resources
SAP_APPL 600 0010 SAPKH60010 Logistics and Accounting
EA-IPPE 400 0010 SAPKGPID10 SAP iPPE
EA-APPL 600 0010 SAPKGPAD10 SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS 600 0010 SAPKGPDD10 SAP Enterprise Extension Defense Forces & Public Security
EA-HR 600 0018 SAPKGPHD18 SAP Enterprise Extension HR
EA-FINSERV 600 0010 SAPKGPFD10 SAP Enterprise Extension Financial Services
FINBASIS 600 0010 SAPK-60010INFINBASIS Fin. Basis
EA-PS 600 0010 SAPKGPPD10 SAP Enterprise Extension Public Services
EA-RETAIL 600 0010 SAPKGPRD10 SAP Enterprise Extension Retail
EA-GLTRADE 600 0010 SAPKGPGD10 SAP Enterprise Extension Global Trade
IS-PS-CA 600 0010 SAPK-60010INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-OIL 600 0010 SAPK-60010INISOIL IS-OIL
IS-M 600 0010 SAPK-60010INISM SAP MEDIA
IS-H 600 0010 SAPK-60010INISH SAP Healthcare
IS-CWM 600 0010 SAPK-60010INISCWM Industry Solution Catch Weight Management
INSURANCE 600 0010 SAPK-60010ININSURANC SAP Insurance
FI-CAX 600 0010 SAPK-60010INFICAX FI-CA Extended
FI-CA 600 0010 SAPK-60010INFICA FI-CA
ERECRUIT 600 0010 SAPK-60010INERECRUIT E-Recruiting
ECC-DIMP 600 0010 SAPK-60010INECCDIMP DIMP
IS-UT 600 0010 SAPK-60010INISUT SAP Utilities/Telecommunication
SEM-BW 600 0010 SAPKGS6010 SEM-BW: Strategic Enterprise Management
LSOFE 600 0010 SAPK-60010INLSOFE SAP Learning Solution Front-End
ST-A/PI 01K_ECC600 0000 - Application Servicetools for ECC 600
APICON 1470000000 0000 - APICON GmbH, Interface Add ON
thank you Xavier -
ERROR when Trying to Create Support Message in Satillite system
Hi,
I have configured Service Desk in solution manager, when i try to send a Support Message(Help ->Create Support Message) from satillite system to Solution Manager i got this ERROR msg. "Error in local message system; message 000000000001 not complete".
Help me to sort out this.....Hey ...I had a same problem last week...
I'm unable copy the Weblog / upload the document ...Any way follow below steps.
1)Go To Transaction Code SPPFCADM in Solution manager
select DNO_NOTIF and click on 'Define action profile and actions
Select action profile 'SLFN0001_STANDARD_DNO'
2)choose action definition 'SLFN0001_STANDARD_DNO_CRM' and click on
the processing types
3)delete the container expression ITEM_PRODUCT_ID
Refer SAP Note 1011376
Hope this helps you.
Praveen, -
Not able to create a message from satellite system
Hello Everyone.
We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
Note : Error Message related to this problem is ....
<b>"Error in Local Message System : External number assignment, Enter notification num message was not Created."</b>
Thanks in advance.
Regards,
Nimesh V . MasterHi, you need to check the number ranges for the notifications and make sure they are correct. Look in the IMG of the SAP Solution Manager system for the instructions. You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+. In the later SPs much of this configuration from the IMG is automated in the wizard.
-
Hello,
I have create a an external content type .
I Choose "Connect with user's Identity".
I create a external list that uses the ExternalContentType.
When I try open the external list from browser by User "TestUser" . I get the following error "Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'"
My Question :
I need to know why pass the credential "NT AUTHORITY\IUSR" to connect to the data base not the
current log in"TestUser" ? How Can I solve it ?
Thanks
Hema
ASkHi,
did you configure Kerberos delegation?
NTLM fails when you try to open external list from client computer, because SharePoint cannot pass user's identity - "Double Hop" issue.
Take a look at confguring Kerberos for SharePoint 2010 white paper
Download Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products from Official Microsoft Download Center
http://www.microsoft.com/en-us/download/details.aspx?id=23176
Robi MCT Kompas Xnet d.o.o. Ljubljana | blog: http://xblogs.kompas-xnet.si | website: http://www.kompas-xnet.si
Slovenia
Please vote if you find reply useful or mark it as answer.
Thank you -
SOLMAN EHP1 - anyone can create support message in Satellite System's Help?
Hi,
I just curios that why everyone can create support message in satellite system-> help -> create support message?
I tested with restricted profile user and without role SAP_SUPPDESK_CREATE, NO BP created but he still manage to create support message???? Any idea??
Also, same goes to any user can process ticket in SOLMAN with no BP-Employee role and SAP_SUPPDESK_* roles assigned.
Your kind input is very much appreciated.
Thanks,
Nicholas ChangHi Nicholas
If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
The user entered in the RFC details probably has the authorization to create Support desk messages.
Regards
Amit -
Create support message in satellite system
Hi,
What are the pre-requisites to configure creating support message in satellite system.
Thanks
RajeshHi,
Follow this blog u can set up ur service desk
mainly it comprises of roles table entry and rfc destination in satellite systems
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
hope it solves ur problem
Regards
Prakhar -
Support Message from satelite system: Reported By field blank only from BI
Hi,
I have configured the Incident Management for solman 7.1 with SP12. I am using the transaction type ZMIN that is a copy of SMIN.
In our landscape are two satelite systems: BI and ECC
When I create a message from managed/satellite system via HELP>Create Support Message, it comes to Solman the field "Reported By" is not filled automatically if I created the message from BI. The Creation from ECC works fine: the field "Reported By" is filled automatically.
The system data is fetched up correctly and it includes the system info, component code and all details. Even the Support Team Determination with BRF+ is working fine.
Not successful actions to solve the problem:
- I tried some access sequences in Partner Determination for "Reported By":
- Preceeding Document -> Reporter -> Current User
- User
- Checked IB52
- Checked DNO_CUST04
No_User_CHECK; No Existence Check for User; field value:X
- Checked BP (Generated with BP_GEN):
identification in BP seems correct (I added created/expiry date manually)
- Checked BCOS_CUST.
- Checked Read RFC.
Has someone an idea what the problem could be?
Thank You for your effort in advance,
BedaHi,
1) Under identification tab in external BP no. put details as
<Server short name>space<client>space<search term
(which you have maintained in address tab or employee no.
of that user in satellite system)>
2) In ID type put CRM001
3) Under identification put details as <Server short
name>space<installation no.>space<client>space<search
term (which you have maintained in address tab or
employee no. of that user in satellite system)>
4)Go to trns. BP>select BP role as "Employee"> Indentification tab--> Maintain user name same as user id of employee in satellite system or serch term you maintained while creating BP.
Try this. Reward the points for useful answer.
Regards,
Niks -
ERROR when Trying to create support message in satellite system
Hi
I have a wired problem.
My user's are opening support message in the solman through the ECC system.
But when a user is open a support message with the component FI he get the following message:
"Error in Local Message System: Component FI does not exist: Check your entry Message was Not Created"
I'm working with ECC6 and SOLAMN 4.
Why I can't generate support message with the component "FI" ?
Please advice
Best regards
Lior GrinbergHi
SAP Component is FIN Financials not FI that is why I thnk u r getting an error.
Normal process is
Whenever your user will post any message from any Transactions of FI module in ECC they goto help->create support message
This will automatically fill the SAP Component
Secondly if they are posting from initial logon screen they can choose the value by pressing F4 in SAP component field
Hope it solves ur problem
Regards
Prakhar -
Ibase/Component issue while creating a message from satillite system
Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
BabuHi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand -
Creating SC's from external system
Hi there,
Does anyone have experience creating shopping carts into SRM from a different application (via an interface). I know about the existence of BAPI BAPI_SCEC_CREATE but would like to know if anyone has experience and maybe already some hints/tips/code available that I could use.
Would be very much appreciated.
Regards,
Machiel.Hi,
You can use standard BAPIs like BBP_EXTREQ_INBOUND or BBP_PD_SC_CREATE_EXTERNAL to create shopping carts based on your custom requirement.
Regards,
Sanjeev -
Service Desk - Create Message from Satellite System
Hi Guru,
I'm learning SAP Solution manager service desk tools (on EHP1 SP22). I've managed to activate it and I can create the message from satellite system (with SLFN as default transaction type). Is it possible to change default of transaction type while creating support message from satellite system (e.g. using ZSLF, etc)?
Appreciate for your input.
Thanks and Regards,
YanYes. It is very much possible.
Use transaction - SPPFCADM
select the row - DNO_NOTIF
click on - Define action profile and action
Select the action profile - SLFN0001_STANDARD_DNO
Select the action - SLFN0001_STANDARD_DNO_CRM
in processessing type, change the container value to ZSFN.
Hope this will be helpful.
Regards
K.Kumar
Maybe you are looking for
-
IPhoto 6 and Spotlight Integration Issues
I have just upgraded from 10.3.9 to 10.4.8 and upgraded from iLife 05 to 06. I was playing around with Spotlight and clicked on an image it found that is located in iPhoto. iPhoto opened but instead of going to the photo it displays the first photo i
-
Configuring AD Sites and Services best practice for multiple office site ?
Hi People, Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ? I'd like to know more about the number and the direction of the conn
-
Keyboard deactivates when switching
I have two computers hooked up to a 4-port KVM switch and every time I switch between them I have to unplug and replug in the keyboard cable from the KVM output. The keyboard is a standard 101 key PS/2 keyboard and both computer have the default Micr
-
Inspiration Browser Installation Problem Elements 8
In Elements 8 when I click on "Tips and Tricks" the message says Inspiration Browswer isn't installed. So I go through all the boxes guiding me on installation and it ends with a message that says it couldn't be installed because there was an error.
-
Hi, I have to display Tree items in clickable link item as simillar to LinkButton. Can anyone help me plz. Thanks!