Create Support Message via BAPI with additional partners

Hi all,
i need to create a support message (slfn) via  bapi / function module. The basic creation is no problem with BAPI_NOTIFICATION_CREATE.
But i need to set additional partner(functions) like "approved by" in the support message. With this bapi i can only set the processor and creator of the message.
How can i add additional partners via BAPI call?
Any help would be much appreciated.
Daniel

Hi Daniel,
i do not think there is a standard functionality for this.
you can use function module CRM_DNO_UPDATE_PARTNER to set partner functions to a message. You will have to build your own RFC enabled function module around this, though.
Then you can use it to add your partners after the message was created.
Regards,
Christoph

Similar Messages

  • Create Support Message via ESS

    Hi,
    I have come up with one new requirement to create support message from ESS.
    I have found one BSP application DSWP_CREATE_MSG for same and attached
    It in portal. Now the problem is, when message is created SOLD-TO-PARTY, Reported By
    Are not getting populated, even Ibase is not getting populated.
    I have mapped user with BP also.
    When same user creates support message from R/3 its works all fine.
    Please help me in this matter..
    Edited by: SHREE WADEKAR on May 29, 2009 3:19 PM

    Hi SHREE WADEKAR,
    Did you find solution for this issue?
    We encounter the same issue.
    Can you please share the solution?
    Thanks in Advance.
    Regards
    Sanjai

  • Create Support Message via Help - Limitation for certain people

    Hi,
    i try to configure my SolMan, so that only a couple of person can create a support message with Help -> Create Support Message.
    I look for a role, but can't find anything to solve this issue. Does anyone now what I have to customize, that only people I allow can create a support message in that way?
    Thanks in advance
    Michael

    Thanks for your replies, but this doesn't solve my problem
    1) When I don't create a business partner for those people, they can create messages, but then then the filed "message processor" would be empty in SolMan
    2) which role do you mean? I tested with a test-user without any role - he can create support messages as well...
    regards
    Michael

  • Send  data from  "create support messages"  via Mail to a ticket system

    Hello all,
    I'd like to make use of the option "create support messages" directly out of the induvidula SAP systems. This would raise highly the Information our supporters recieve.
    As far as I understand there must be an initial setup to get the above mentioned functionaly in an individual SAP system.
    The problem is that we do not want to use the SAP Service Center. We have a very effectiv Interface to our current ticket system which scans incomming eMails, evaluates, classivies and routes them.
    Due to this I like still to use the "create support messages" directly out of the induvidula SAP systems to gather the information BUT then I like to send all as an eMail to our ticket system.
    Has anyone done something like this or has an idea how to set this up? I have heard that this is a not too rar setup but until now I couldn't find someone who actually set this up.
    Thanks a lot
    Michael

    Hello Michael,
    I found your forum entry and I would like to ask if you have solved this problem? I would also like to implement a third party ticked system with menu - create support message.
    Do you have any information or documentation how to do this?
    Thanks and kind regards,
    Leo

  • With SP16-17 we can't create support message from satellite system anymore

    hello,
    We have implemented the support package 16 and 17 SAPKITL427 in solution manager last week-end and since then all satellite systems can not create support message anymore.
    The process is perfectly working in solman itself and we don't think we have thus a process customizing issue here but who knows...
    The key user creates the message with the help -> create support message
    and when he saves it (clicking the mailbox button) he gets the following error
    Error in Local Message System: Function not available Message was Not
    Created
    In fact the error Message is BCOS088
    We debugged the function BCOS_CREATE_MSG and we found out that the function
    DNO_OW_CREATE_NOTIFICATION is returning error code 1.
    We checked out RFC connection and it looks ok
    There is no dumps in ST22, no error in SLG1 in both system...a nightmare
    The notification SLF1 is created in solman but the status field of the notification is empty and it looks that the record is somehow corrupted because you can't modify it with dnotifwl.
    Due to the fact that the notification is not correctly created the support message is also not created.
    SAP and our solman consultant are working on it since 2 days but don't have a clue.  Maybe some program where no regenerated correctly ?
    If you would have any idea in which direction to look, i would greatly appreciate
    thanks a lot
    best regards Xavier

    hi Rohit,
    on the satellit I have the following versions
    SAP_BASIS     700     0012     SAPKB70012     SAP Basis Component
    SAP_ABA     700     0012     SAPKA70012     Cross-Application Component
    PI_BASIS     2005_1_700     0012     SAPKIPYJ7C     PI_BASIS 2005_1_700
    ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
    SAP_BW     700     0013     SAPKW70013     SAP NetWeaver BI 7.0
    SAP_AP     700     0009     SAPKNA7009     SAP Application Platform
    SAP_HR     600     0018     SAPKE60018     Human Resources
    SAP_APPL     600     0010     SAPKH60010     Logistics and Accounting
    EA-IPPE     400     0010     SAPKGPID10     SAP iPPE
    EA-APPL     600     0010     SAPKGPAD10     SAP Enterprise Extension PLM, SCM, Financials
    EA-DFPS     600     0010     SAPKGPDD10     SAP Enterprise Extension Defense Forces & Public Security
    EA-HR     600     0018     SAPKGPHD18     SAP Enterprise Extension HR
    EA-FINSERV     600     0010     SAPKGPFD10     SAP Enterprise Extension Financial Services
    FINBASIS     600     0010     SAPK-60010INFINBASIS     Fin. Basis
    EA-PS     600     0010     SAPKGPPD10     SAP Enterprise Extension Public Services
    EA-RETAIL     600     0010     SAPKGPRD10     SAP Enterprise Extension Retail
    EA-GLTRADE     600     0010     SAPKGPGD10     SAP Enterprise Extension Global Trade
    IS-PS-CA     600     0010     SAPK-60010INISPSCA     IS-PUBLIC SECTOR CONTRACT ACCOUNTING
    IS-OIL     600     0010     SAPK-60010INISOIL     IS-OIL
    IS-M     600     0010     SAPK-60010INISM     SAP MEDIA
    IS-H     600     0010     SAPK-60010INISH     SAP Healthcare
    IS-CWM     600     0010     SAPK-60010INISCWM     Industry Solution Catch Weight Management
    INSURANCE     600     0010     SAPK-60010ININSURANC     SAP Insurance
    FI-CAX     600     0010     SAPK-60010INFICAX     FI-CA Extended
    FI-CA     600     0010     SAPK-60010INFICA     FI-CA
    ERECRUIT     600     0010     SAPK-60010INERECRUIT     E-Recruiting
    ECC-DIMP     600     0010     SAPK-60010INECCDIMP     DIMP
    IS-UT     600     0010     SAPK-60010INISUT     SAP Utilities/Telecommunication
    SEM-BW     600     0010     SAPKGS6010     SEM-BW: Strategic Enterprise Management
    LSOFE     600     0010     SAPK-60010INLSOFE     SAP Learning Solution Front-End
    ST-A/PI     01K_ECC600     0000          -     Application Servicetools for ECC 600
    APICON     1470000000     0000          -     APICON GmbH, Interface Add ON
    thank you Xavier

  • Service desk error creating support message "help- create support message"

    Hi
    I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
    I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
    Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
    The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
    Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
    In order solve the error I review:
    - The satellite SAP system is at the iBase installed components.
    - I've Assign Number Range for ABA notifications at SLF1 transaction.
    - I've Checked number range for Service Desk Message at SLFN transaction.
    - I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
    - (satellite system) Transaction sm30, table BCOS_CUST:
       Appl.            +       Dest.                                  +                     +
       OSS_MSG   W     SM_SMGCLNT010_BACK    CUST620          1.0
       TST_CUS                                                        0120009939
       RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
    - (satellite system) I logged with a SAP user with these roles:
      SAP_SUPPDESK_CREATE
      SAP_BC_CUS_CUSTOMIZER  according SAP NOTE 834534
      SAP_BC_CUS_ADMIN       according SAP NOTE 834534
      SAP_SV_FDB_NOTIF_BC_CREATE
      SAP_SV_FDB_NOTIF_BC_ADMIN
      All these roles are mantained.
    - I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
    Please could you help me?
    Thanks and Regards
    Raul

    Hi,
    When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
    system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
    ========================================================================
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Date and Time          10.07.2008 10:17:26
    Short text
        Access via 'NULL' object reference not possible.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: " ").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "OBJECTS_OBJREF_NOT_ASSIGNED" " "
        "CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
        "PROFILE_CONTAINS_PARTNERDEP"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
    Information on where terminated
        Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
         in "PROFILE_CONTAINS_PARTNERDEP".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 41
        of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
    =========================================================================
    Thanks and Regards
    Raul

  • Creating Support Messages from Satellite System without SolMan user account

    Hi
    We are having some problems with users "creating support message" from our ECC system  to SolMan, if the user does not have a user account in Solution Manager.
    It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
    We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
    Regards
    Lars

    Hi,
    you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
    With this TA, it is easy to create BP for each satellite system.
    Best regards
    Marc

  • SOLMAN EHP1 - anyone can create support message in Satellite System's Help?

    Hi,
    I just curios that why everyone can create support message in satellite system-> help -> create support message?
    I tested with restricted profile user and without role SAP_SUPPDESK_CREATE, NO BP created but he still manage to create support message???? Any idea??
    Also, same goes to any user can process ticket in SOLMAN with no BP-Employee role and SAP_SUPPDESK_* roles assigned.
    Your kind input is very much appreciated.
    Thanks,
    Nicholas Chang

    Hi Nicholas
    If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
    The user entered in the RFC details probably has the authorization to create Support desk messages.
    Regards
    Amit

  • ERROR when Trying to create support message in satellite system

    Hi
    I have a wired problem.
    My user's are opening support message in the solman through the ECC system.
    But when a user is open a support message with the component FI he get the following message:
    "Error in Local Message System: Component FI does not exist: Check your entry Message was Not Created"
    I'm working with ECC6 and SOLAMN 4.
    Why I can't generate support message with the component "FI" ?
    Please advice
    Best regards
    Lior Grinberg

    Hi
    SAP Component is FIN Financials not FI that is why I thnk u r getting an error.
    Normal process is
    Whenever your user will post any message from any Transactions of FI module in ECC they goto help->create support message
    This will automatically fill the SAP Component
    Secondly if they are posting from initial logon screen they can choose the value by pressing F4 in SAP component field
    Hope it solves ur problem
    Regards
    Prakhar

  • Error 513 while creating support message help menu in Solman system.

    Hi Expert
    I am trying to create support message though help in the Solman system. But i am getting an "error 513 message has not created in the Solution manager system".
    - maintained the BCOS_CUST table with RFC - NONE
    - have SAP ALL authorisation
    - using the transaction type SLFN for support message.
    - Check the Action profile for SLF1 and found OK.
    - Also refered some notes in the sap and implemented but still i am getting the same error.
    Please advice.
    Regards
    Kumar.

    HI
    Do u have BP existing for ur id in solman
    Use BP_GEN to create bp for ur user id
    otherwise using BP tcode and check if the identification tab is carrying details for solman system with curent client and userid
    Hope it solv ur prb
    Regards
    Prakhar

  • Add new field in the Create Support Message Popup Screen

    Hi Experts,
    I need to create Project Code Field in the standard popup screen Create Support Message
    Suggest me any Badi or FM or Bapi or Enhancement to create a new field and update the field value to the Support Message created.
    Please let me know if this is possible or not?
    Thank You,
    Sowjanya Sreekrishna

    Dear Abhijit
    Even after doing PGI, there are some fields which are in editable mode in delivery.  For example, in VL02N, if you select "Goto --> Header --> Shipment, you can see fields like Bill of Lading are in editable mode.
    If you specify what your requirement is, then probably, a better option can be given.
    Thanks
    G. Lakshmipathi

  • Wrong number range in ECC Message creation in "Create Support message " tab

    Dear All,
    While creating the support message in any R3 server (ECC,BW etc.) system by clicking
    help->create support message option in main menu tab.
    The message number sequence changes from existing to new saequence.
    The initial sequence is 9999011940 but the current sequence generated
    by system is 1549. We had updated our R3 system with SAP_APPL component
    stack to 17. This changed sequence is happening after patch upgrade.
    Thanks in advance.
    Regds
    Ravi Kant Arya
    +91 9818880902

    Hi Ravi,
    Did you also patch your SOLMAN system ?
    I believe this is controlled by number range object CRM_SERVIC  in your solution manager. Check OSS note 903528 (particularily the section around the resetting of the number range object)
    Regards.
    Ruchit.

  • Create Support Message from external system

    HI experts,
    I would like to change the Create Support Message screen(Menu->Help->Create Support Message) and add three fields namely: Category, Subject and Solution Number because currently these fields are not populated in the Service desk if I create message in this way unlike in using NOTIF_CREATE tcode where there are selection fields for these.
    Also, I'm creating the support message from an external SAP system and the messsage is sent to the Solution Manager system. The NOTIF_CREATE tcode does not exist in the external system as well as the whole package DSWP.
    Please let me know you rthoughts on this.
    Thanks
    Eric

    Hi guys,
    Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
    I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
    I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
    I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
    This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
    As you will notice, there are lots of standard objects that I've changed. =)
    My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
    Thanks,
    Eric

  • HOW create support message ONLY for KEY USER

    Hi all,
    I just configured my service desk and I wanted to give only the key users the permission to create support messages. But every user have the rights to create a message from the satellite system.
    How can I prevent that? Is it possible to hide the option in the menu bar (help - create message) for non-key-users? The key users have the role SAP_SV_FDB_NOTIF_BC_CREATE . non sap users have just standard roles for hr, ...
    Thanks in advance!

    hi,
    in the documentation it is written
    Create messages from satellite systems with Help ® Create Support Message
    SAP_SOL_SERVTRANS_CREATE
    Authorization object S_RFC,
    profile S_RFC_VERS with the activity Execute for the object SAPSMO*
    this is working fine
    see link http://help.sap.com/saphelp_sm310/helpdata/en/71/50548566324a7491916585fe73a2b4/content.htm
    best regards Xavier

  • Sold-To Party and Reported missing when doing Help - Create Support Message

    Sorry, I know this has been asked multiple times, but I'm missing something in the responses.  The responses I am finding either don't seem to apply to my situation, or aren't detailed enough to explain what I'm supposed to be doing.
    Solution Manager 7.0 EhP1 SAPKITL435.
    If we try to do a "Help - Create Support Message" from within our production Solution Manager system, the "Reported by" field is correct, but the Sold-To Party is blank.
    If we try to do a "Help - Create Support Message" from within our non-production Solution Manager system, both the "Reported by" and  Sold-To Party fields are blank.
    If we try to do a Help - Create Support Message" from another SAP system whose RFC is pointing to our non-production Solution Manager system, both the "Reported by" and  Sold-To Party fields are blank.
    I've looked at IB52, as well as the SPRO activities under "Partner Determination Procedure."  I think a big part of my problem is that they just don'e make sense to me yet, because I can't figure out what I should be changing.
    For example, IB52 looks to me like it only applies if you want to assign something to the same person all the time.  Am I missing something there, or is that an answer to a different question?
    I also can't figure out if I need to create something new in "Define Access Sequences," or modify something existing, and, if I modify, to what?
    Does anyone know where I could find specific instructions for setting this up?

    Hi Brenda,
    Regargind this issue, please check if Sold-To party is maintained for
    your system with IB52 in your solman system as the steps below:
    SOLUTION MANAGER system
    ->IB52
    ->select the system on left hand side
    ->click on 'goto' on top menu
    ->Select 'partner'
    ->Now maintain Sold-To party
    Also check below note:
    1165357    Sold-to-Party is not assigned to Service Desk messa
    As you said ou already assigned then i would request you to please check if you have assigned at the system level or not. Somtimes people define at top of the tree and also at system level. Please assign at system level and delete all other. Most of the times this is the issue Sold-to-party doesnt fill automatically.
    For reported by field:
    Please check the note: 824640: Customizing missing for Service Desk in Solution
    read this note carefull and this will help you fixing the reported by issue.
    Please, make sure you have applied the following corrections:
    1439191 Incident Create: Message Reporter or Processor is not saved
    1486132 Incident Create: Enhance search help of Reporter field
    1497700 Work center: Message details not updated after refresh
    After this if you still having issue you need to provide more details but i think this will fix the issue.
    Thanks
    Regards
    Vikram

Maybe you are looking for

  • How many computers can you connect, how many computers can you connect

    Hi Folks I have just purchase Apple TV and was wondering if you can connect more than one computer/iTunes libarary to Apple TV. My reasoning for asking is we have a few Itunes accounts in our home so thought there was potential for others to connect

  • I pad not recognized by pc ....... Help.... Please.

    Hi to all my I pad 3 will not be recognized by my pc I have temporarily disabled my anti virus , and re booted both & made sure all drivers are up to date . I have made sure iTunes is the latest version & changed USB ports ...... Man I'm getting frus

  • Generating pdfs with invisible sections made visible through code

    I have a survey with several question that are either visible or hidden based on the user's selection from a Yes/No radio button group.  The user can then either submit the survey by e-mail or print the survey.  If the user prints the survey before s

  • Can't redownload and open an App

    I Was updating my Instagram app when my phone lost battery. I charged up back up but them I realized Instagram had been deleted. When I went to the App Store, I wasn't given the option to redownload it but rather "Open" I clicked on open but nothing

  • No url is showed at the bottom left corner when my mouse cursor is hover a link

    Hello, When I went hover a link I used to see the url showed on the bottom left corner, but it has been a while that it is not happening anymore. Is it a bug or that feature was removed? If it is a bug, how can I fix it? Thanks