Create "Sysadmin Read only" Responsibility and add to Application user.

Hi
I am using 11.5.10.2 (Single node installation) on RedHat LinuxAS4 OS. I have couple of requests from the users.
Issue 1:
The user has requested to "Sysadmin Read Only" Responsibility and attach that responsibility to his user. Please find below the request raised by the user.
Can u add query only access for Sysadmin responsibility as I need an option to check the values assigned to each profile option and other relevant functionalities in sys_admin responsibility.
Issue 2:
The user is unable to open two forms simuntaniously. I was asked to set a profile option for that, please let me know which profile option is that.
Thanks and Regards
Amith

Amith
Issue 1:
Refer the following thread
System Administrator Read-Only responsibility.
Issue 2:
Perform the following steps
System Administrator ->Security->Responsibility->Define
Query the responsibility for which u want to enable Multiform access
In the Menu Exclusions tab add
Type: Function
Name: Navigator: Disable Multiform
-HTH
Regards
Mahesh

Similar Messages

Workflow Admin read only responsibility in EBS 11.5.10.2

Hi All,
I have a requirement to create a read only workflow administrator. For that I have done the below steps.
1. Created one permission set with Monitor Data.
2. Created one role and one grant for that role with the above selected permission set.
3. Then I have assigned the responsibility Workflow Administrator Web (New) to a user.
4. Assigned the above created role to to that user.
Then I tried to access the WF pages from that user, but still he is able to do all the activities that is possible by the Workflow Administrator Web Applications responsibility.
When I navigated to Workflow Administrator Web Applications-->Administration, Workflow System Administrator LOV is having value '*'. I changed that to 'Workflow Administrator Web Applications', and tried to access Workflow Administrator Web (New) from the above user.
Now no buttons are enabled for him. But in the Status Monitor, the user will be able to view only the Workflows owned by him.
But my requirement is to view all users workflow.
Can anyone guide me on how to achieve that.?
Also, I found that there is no significance for assigning Monitor Data permission. Please suggest me on that aspect also.
Hoping for youe valuable comments.
Thanks in advance.
Regards,
Charls K V

Hi Charls,
The note is also telling the same thing.:(
Then is there anyway to achieve my requirement.
Should be able to query everything as the admin does. But won't be able to perform any actions.
Looking forward for your valuable comments.I did manage to create the same using (How to Restrict Access to Data in the Workflow Monitor based on Item Types? [ID 559072.1]) but for specific item type (omit this step if you want to have access to all item types).
If you could share the steps you followed (in details) to implement the above, it would be helpful.
Please also review (How to enable Workflow Owned By LOV in Workflow Status Monitor for a User other than SYSADMIN [ID 1328447.1]) and see if it helps.
Thanks,
Hussein

Read only responsibility

Hi
I would like to create Read Only responsibility for administration purpose. As i have seen in this forum that, there are some read only resposibilities for AR, HR, AP etc. Like wise responsibility for administration purpose. I do not want to create new with new menu etc.
Regards

You can set "HR: Query Only" Profile option to Yes at responsibility level for HRMS.
Another way is you can create a responsibility with a data group that is attached to a read only database user. You might find the folliowing link helpful in creating the readonly apps database user and responsiility
[http://oracle.anilpassi.com/read-only-schema-in-oracle-apps-11i-2.html]

Form personalization for a read only responsibility for a custom form

Hi,
I have a read only responsibility. My requirement is to make a custom form updatable through this responsibility but wth a condition that only the specific custom form should be updatable and rest all other form accessed through read only responsibility be read only. How can i achieve this using form personalization?
Pls give me detailed steps if possible.
Thanks

I tried override Query Only values through Forms Personalization but it did not work for me. With a bit of determination I might have been able to work around it but no luck on that front.
You can do it this way, although it's a bit cumbersome:
1. Clone every function and menu in the Responsibility
2. In all but your custom function set the Function parameter QUERY_ONLY=YES

How to create a read only access for database

I am developer but willing to lear some of the dba tasks. I would like to know the steps that i need to take to creat a read only access database that is going to be used for the report development.
I really appreciate if you tell me all the steps I need to create that. I have a full right to do this in the develpment database. thanks

thank you for your reply but it does not tell me how i can set up a read only access acccount for the user. Do i need to create a role and assign the role to the users?

Error ora-12028 while creating a read-only snapshot

Hi !
I'm in trouble creating a read-only snapshot of a simple table.
The Master table belongs to an ORACLE 7.3.4 database instance, while the snapshot site belongs to an ORACLE 8.1 database. The read-only snapshot should have a refresh type FAST, but while I'm running the CREATE SNAPSHOT statement in the snapshot site I receive the following message:
"ORA-12028 snapshot type is not supported by master site string
Cause: Pre-Oracle master sites are not able to support primary key or
subquery snapshots that are able to perform a fast refresh.
Action: Create a ROWID snapshot or use a master table from an Oracle8 site. "
This message doesn't help me enough. Is there anyone who can give me an advice ?
Thanks you all.
Laura

Well laura earlier version doesn't support snap shot based on primary key
u should disable primary key constraint from master site
and create snap shot on the basis of row id.
for further detail mail me at [email protected]

Creating a read-only user account

I am trying to create a read-only user account. Reason being,
when our users may be able to use MS Access to pull information
and modify changes (if possible). I was told there is a way to
do this. Help?

I'm connecting using ODBC with a user account that I created.
This dummy account will be available to approx 15 users so they
can generate reports using Crystal. But, if there is someone
that wants to generate queries using MS Access, they can still
modify the data. So, how do I create only select statements to
disallow users from using MS Access to link to the oracle
database and change data?

Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"

hi,
I'm on the https://helpx.adobe.com/creative-cloud/learn/start/premiere.html page trying to work through the Create a sequence or timeline and add audio tutorial
And cannot see the Video & Audio, as shown in the bottom right sub-window
I'm using a trial version of Premier pro CC downloaded yesterday. On my mac mini running 10.9.2
does anyone know how to fix this problem?
thanks
david
I am able to hear the audio.
Message was edited by: spottedsilvertabby

Hi,
Error 7 is when a router or the connection to the router is broken in some way.
Some devices have features such as Denial Of Service protection (DoS) that cut a particular Internet Port when it thinks too much data is coming (Presuming it is an attack.)
iChat 5 in Leopard is not capped by the System Preferences > Quicktime Streaming speed (which we used to suggest was set at 1.5Mbps)
It now sees your whole Connection speed and your Upload may be much faster than this.
Your Download is likely to be much faster. However iChat will tend to operate at the lower figure of your Upload.
DoS features are threshold based.
You may now be bumping in to this Threshold where you were not before.
SPI (Stateful packet Inspection) does a different job but has the same effect when it is overloaded by the speed of the data.
If you have either of these features, turn them Off (Disable them)
7:25 PM Friday; October 2, 2009

MOVED: Folders Created As 'Read Only' By Default

This topic has been moved to Off-Topic Technical.
Folders Created As 'Read Only' By Default

This topic has been moved to Off-Topic Technical.
Folders Created As 'Read Only' By Default

Can an unique index be created on read only cache group

Hi
Can an unique index be created on read only cache group
Regards
Siva Kumar

No, I do not think so. Creating a unique index could cause autorefresh operations to fail if the data being refreshed contains duplicate values that would not be allowed by the index. You can create regular indexes on a table in a readonly cache group.
Chris

Steps to create a read only schema

Plataform 11.5.10.2
Hi Guys,
Can someone provide me with the steps to create a read only schema in Apps please.
Thanks in advance

Check the following thread:
READ-ONLY APPS Schema in EBS
READ-ONLY APPS Schema in EBS.

How do you create default Read/Write Permissions for more than 1 user?

My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc.
However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/folder.
By default new files and folders grant Read/Write to the creator of the new file/folder, and read-only to the Group "Staff" in our own accounts or "Wheel" in the /Users/Public/ folder, and read-only to Everyone.
We are both administrators on the machine, and I know we can manually override the settings for a particular file/folder by changing the permissions, but I would like to set things up so that the Read/Write persmissions are assigned for both of us in the folder for that holds our business files.
It is only the 2 of us on the machine, we trust each other and need to have complete access to these many files that we share. I have archiveing programs running so I can get back old versions if we need that, so I'm not worried about us overwriting the file with bad info. I'm more concerned with us having duplicates that are not up to date in our respective user accounts.
Here is what I have tried so far:
1. I tried to just set the persmissions of the containing folder with us both having read/write persmissions, and applied that to all containing elements.
RESULT -> This did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
2. I tried using Sandbox ( http://www.mikey-san.net/sandbox/ ) to set the inheritance of the folder using the methods laid out at http://forums.macosxhints.com/showthread.php?t=93742
RESULT -> Still this did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
3. I have set the umask to 002 ( http://support.apple.com/kb/HT2202 ) so that new files and folders have a default permission that gives the default group Read/Write permissions. This unfortunately changes the default for the entire computer, not just a give folder.
I then had to add wife's user account to the "Staff" group because for some reason her account was not included in that. I think this is due to the fact that her account was ported into the computer when we upgraded, where as mine was created new. I read something about that somewhere, but don't recall where now. I discovered what groups we were each in by using the Terminal and typing in "groups username" where username was the user I was checking on.
I added my wife to the "Staff" group, and both of us to the "Wheel" group using the procedures I found at
http://discussions.apple.com/thread.jspa?messageID=8765421&#8765421
RESULT -> I could create a new file using TextEdit and save it anywhere in my account and it would have the permissions: My Username - Read/Write, "Staff" or "Wheel" (depending on where I saved it) - Read/Write, Everyone - Read Only, as expected from the default umask.
I could then switch over to my wife's account, open the file, edited it, and save it, but then the permissions changed to: Her Username - Read/Write, (unknown) - Read/Write, Everyone - Read Only.
And when I switch back to my account, now I can open the file, but I can't save it with my edits.
I'm at my wits end with this, and I can believe it is impossible to create a common folder that we can both put files in to have Read/Write permissions on like a True Shared Folder. Anyone who has used windows knows what you can do with the Shared folder in that operating system, ie. Anyone with access can do anything with those files.
So if anyone can provide me some insight on how to accomplish what I really want to do here and help me get my system back to remove the things it seems like I have screwed up, I greatly appreciate it.
I tried to give as detailed a description of the problem and what I have done as possible, without being to long winded, but if you need to know anything else to help me, please ask, I certainly won't be offended!
Thanks In Advance!
Steve

Thanks again, V.K., for your assistance and especially for the very prompt responses.
I was unaware that I could create a volume on the HD non-destructively using disk utility. This may then turn out to be the better solution after all, but I will have to free up space on this HD and try that.
Also, I was obviously unaware of the special treatment of file creation by TextEdit. I have been using this to test my various settings, and so the inheritance of ACLs has probably been working properly, I just have been testing it incorrectly. URGH!
I created a file from Word in my wife's account, and it properly inherited the permissions of the company folder: barara - Custom, steve - Custom, barara - Read/Write, admin - Read Only, Everyone - Read Only
I tried doing the chmod commands on $TMPDIR for both of us from each of our accounts, but I still have the same behavior for TextEdit files though.
I changed the group on your shared folder to admin from wheel as you instructed with chgrp. I had already changed the umask to 002, and I just changed it back to 022 because it didn't seem to help. But now I know my testing was faulty. I will leave it this way though because I don't think it will be necessary to have it set to 002.
I do apparently still have a problem though, probably as a result of all the things I have tried to get this work while I was testing incorrectly with TextEdit.
I have just discovered that the "unknown user" only appears when I create the a file from my wife's account. It happens with any file or folder I create in her account, and it exists for very old files and folders that were migrated from the old computer. i.e. new and old files and foders have permissions: barara - Read/Write, unknown user - Read Only, Everyone - Read Only
Apparently the unknown user gets the default permissions of a group, as the umask is currently set to 022 and unknown user now gets Read Only permissions on new items, but when I had umask set to 002, the unknown user got Read/Write permissions on new items.
I realize this is now taking this thread in a different direction, but perhaps you know what might be the cause of this and how to correct or at least know where to point me to get the answer.
Also, do you happen to know how to remove users from groups? I added myself and my wife to the Wheel group because that kept showing up as the default group for folders in /Users/Shared
Thanks for your help on this, I just don't know how else one can learn these little "gotchas" without assistance from people like you!
Steve

Shared Computer over Ethernet is creating read-only files and folders

Hi,
I have set up a ssecond mac connected to my G4 via ethernet connection. We are both using my mac as the main computter and both working from one folder on it. BUT when the second computer creates a folder or saves a job into this folder the permissions are set for them to 'read only'.
How do you make it so whatever they create is all read and write.
The second mac is logining is not as the administrator but as a normal user. I do not want them to have full access.

Hello DH-Studio
Hi, this is still causing me problems, is there another way?
Sharepoints does work howerver the other way to do this that does not involve using UNIX commands is to run Server Software such as Mac OSX Server.
The 10 User licenced version is affordable and it has an excellent GUI called the Workgroup Manager which can setup sharepoints, users & groups permissions very easily. It has many other benefits.
Other than that their are UNIX commands such as umask. However I have no experience using umask and I understand it make global changes to your system. I would avoid using it.
You also could setup a crontab rule that changes the permissions on the shared folder every minute. In your terminal use the following commands
sudo nano /etc/crontab
You will then see
using your arrow key move the cursor down to area indicated in my example then enter the following information
*/1 <press tab twice> * <tab> * <tab> * <tab> * <tab> root <tab> chmod -R 777 /shared
it should look like the following
replace "/share" with the actual path to your sharedfolder
Then close the file with "control +O", then "return" then "control X"
Now any file that is saved to your share folder will be readwrite to everyone every minute. This is a clumsy method but it works.
iBookG4 1.33ghz. 20inch iMacG5, 1.2ghz Mac Mini, ipod video, iSight Mac OS X (10.4.3) Linksys WRT54gs+1.05 Talisman Firmware, Telewest 10mb/384k

Read-only textbox and/or disable buttons in Infopath 2013

In a InfoPath 2013 custom list form, my requirement is to make textboxes read-only, disable buttons, and/or create new buttons so users can not update fields in a custom list once the user has updated data in the list. Basically after the user hits the 'save'
button so that the data is saved.
The requirement is not to set up custom permissions since my SharePoint administrator said I should find another option. This administrator said he does not see a reason for only an 'add' permission.
Thus can you tell me how to meet my requirements? Can you show me screen prints, pictures, or urls on how to solve the problem?

Hi,
According to your description, you might want to prevent users from editing the existing items.
There are two workarounds I can provide as below:
As the first workaround, you can remove Ribbon from SharePoint InfoPath List Form via modifying the OOTB settings of InfoPath Web Part.
Here is a link about more details, you can use it as a reference:
http://the-north.com/sharepoint/post/Remove-Ribbon-from-SharePoint-InfoPath-List-Form
As the second workaround, you can apply the CSS code below to your page, it will hide the “Edit Item” button in the Ribbon:
<style type="text/css">
#Ribbon\.ListItem\.Manage\.EditProperties-Large{display: none !important;}
</style>
About how to add JavaScript/CSS into SharePoint page:
http://blog.cloudshare.com/2012/10/29/how-to-insert-custom-javascript-code-in-sharepoint-2013-pages-part-i/
Best regards
Patrick Liang
TechNet Community Support

How to create a new cell attribute and add adorner to the cell

Hi
I am relatively new to InDesign and wanted to do the following
I want to add a new boolean attribute to a selected table cell. When this attribute is set, I would want to draw one line vertical and one line across the selected cell ( kind of like a "Plus" sign over the cell). I am wondering how to go about doing this.
PS: I read the snippet snpManipulateTableStyle and can see how to change a cell style using existing attribute (kcellAttrFillColorBoss). However in my case, i want to create a entirely new boolean attribute and based on it being true or false, I would want to draw the adornment on the cell
Any help with this would be greatly appreciated..
thanks!
Sam

I would create the new site first, then promote the new domain controllers and add them to the site. You can do this during the dc promote process.
There's step by step guides already available for creating a site so I don't see any point reinventing one.
Here's one:
http://www.petri.co.il/create-active-directory-sites-windows-server.htm
You may have to adjust the site links part since it looks like Site 3 will only be linked to Site 1.
Of course, the IP addresses for the domain controllers in Site 3 have to be in the IP subnet configured for that site.
Using the example above, you'll of course have to enter the information that makes sense for your netwrok.
I doubt anyone will create a custom step by step for you using the information you provided (they'd also have to know your subnets for one thing) but then, who knows.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Create "Sysadmin Read only" Responsibility and add to Application user.

Similar Messages

Maybe you are looking for