Create system alias (Mac) or shortcut (Windows)

Hi,
is there any way to create such "files" from an Air Application ?
I think there's no API able to do this. But maybe is it possible using raw binary data writing ?
Thank you.

How did you remove Windows 7? If you did not use Boot Camp Assistant you have messed up your drive and will have to start over by erasing and formatting your drive then reinstall OSx and and Windows 8.

Similar Messages

Unable to create system Alias.

Hi All,
I Created one system object , but i am not able to create system Alias.While creating system Alias it throws this error " This system object is restricted and u can't create System Alias". Exactly what is the prob?What is the solution?
Thanks in Advance.

Hi,
system object is restricted
1. Make sure you have required permissions to create the system object. You should use administrator user to create the system.
2. Check the object properties and permissions.
Refer following procedure to create the system object and see if you have missed any step.
http://wiki.sdn.sap.com/wiki/display/EP/11Systems-+Creation
Regards,
Varun

Problem in creation of system alias for bw system

Hi,
I want to create system alias for the bw system
system admin->sys Config->system landscape->portal content->my own folder
for this folder i created the system object
after creation of system object, from property category i select the connector and give the details.
after that i select the user management and give
authentication ticket - select
Logon method- UIDPW
User Management type- admin,user
i saved till now
in the display object i select the system alias
then that screen displays
In the system alias screen, i clicked on add button for adding alias then we r getting this message.
User Mapping Status: (Not ready for user mapping configuration)
Please give the solution for solving this problem
Regards,
Sid.
Edited by: sid m on Mar 11, 2008 12:15 PM

Hi Krishna,
I checked the connection settings.
WAS settings in system object is giving this mistake
before user mapping it works fine.
after giving usermapping i ma getting this exception.
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
5. HTTP/S connection failed
for testing the connector i am getting this exception
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Regards,
Sid.

System Alias Configuration in EP6

Dear All,
Can Any one tell me How To Configure the System Alias in Ep6 netweaver Component...
I have followed the steps given in Documnetation
first i created the system...
while creating the system it is asking system id system name..
i gave system id some thing like Test1 and System name as url of the my SAP server which is some thing like /K/192.65.177.3/...../10.30.245.40/K/141.119.9.130
after creating system i created a system alias but whatever i created system alias should come under users manage ment section to configure the user id password after selecting the system as how it comes in ep5.. but it is not comming can any thing is miising or wrong in my system alias configuration....
can any one please help me in configuring the system alias
Thanks and Regards
Prasad.Y

Hi Prasad,
What User Mapping Type have you given?
You should give "Admin,User" for the system to come for user mapping.
Regards
Prakash
PS: Could you please not duplicate the posts.

How to enable shortcuts on "MAC" as in windows. (ie : Alt+I+I = for image size in PS )

How to enable shortcuts on "MAC" as in windows. (ie : Alt+I+I = for image size in PS )
Im using a mac system and adobe CS6 package. mainly works with Indesign, Illustrator and Photoshop.
But shortcuts doesn't works like Alt+I+I, Alt+I+S..... like that as on Windows computers.
Is there any way to enable "underline for shortcut letters" in mac for adobe products...?

Here in Photoshop on Windows OS you can see the letter for shortcut shown as underlined
In Menu bar
F for File
E for Edit
and I for Image
We can press alt+F to list file menu
and alt+E to list Edit menu
Is there any option like this to enable shortcuts for menu bar in "MAC OC"

Is there a way to create an action or keyboard shortcut to set Crop tool to the front window size?

Is there any way to create an action or keyboard shortcut to set the Crop tool to the front window size in Photoshop CS6?
I find that I use that several times a day. I got used to it being the top choice in the Crop tool presets menu.
Thanks.

It depends on whether you have the cloud version or perpetual license version.
For the cloud version press I (eye)
For the perpectual version press F

I tried opening my Mac files to windows by using Macdriver 8, however upon opening the file my previous mac folders were converted to windows shortcuts and upon returning to my mac pc, all my folders has a .lnk file extension which I cannot open.

I tried opening my Mac files to windows by using Macdriver 8, however upon opening the file my previous mac folders were converted to windows shortcuts and upon returning to my mac pc, all my folders has a .lnk file extension which I cannot open. Need help very badly since the hard drive I use is the only back up I have for my very old pics. Thank you...

Backup with cloning software your HD to have an exact copy of it as it is.
Use this methodology to recover your partition.
Have fun,
Leo

Trouble Creating System Image in Windows 8.1

My system: Satellite P55-A5312 with 750GB HDD, Windows 8.1 (upgraded from pre-installed 8.0), BIOS fw 1.90 (just updated)
Tried to create System Image: Start ==> Search ==> File History ==> System Image Backup ( in lower left corner of the screen). Successfully finds the 1TB backup drive (newly formatted at NTFS) attached via USB. Message says 204GB of space will be needed to store the image. (Note: 1TB is almost 5 times what is needed).
Start Backup ==> "The Backup Failed", "There is not enough disk space to create the volume shadow copy on the storage location, etc.).
I found the following thread in this forum: http://forums.toshiba.com/t5/System-Recovery-and-Recovery/System-Image-Fails-on-Windows-8-1-Pro/m-p/...
and am curious what the following recommendation means: "To work around this problem, increase the size of the OEM partition on the backup drive."
What OEM partition? My backup drive has a single NTFS partition consuming the entire capacity of the HDD. What am I doing wrong?
Solved!
Go to Solution.

After increasing the size of 1 partition, the System Image utility completed without error. To fully confirm, I need to try an image restore.
The long answer is noteworthy (refer to the attached). I used 3 different methods to query partition size and usage.
1. Disk Management shows that 4 of the 5 partiions are 100% free space. What I don't understand is how the System Image utility of Windows 8.1 understands the partition sizes/usage but Disk Management does not.
2. Macrium Reflect gives what appears to be an accurate representation of the partitions and their size/usage. It also includes a (hidden?) partition not shown in Disk Management, thus 6 instead of 5 partitions.
3. MiniTool Partition Wizard agrees for the most part with Macrium Reflect with two notable exceptions. It shows the 128MB partition has zero free space (vs 113.7MB = 89% free space using Macrium Reflect). This is a BIG difference. Also, the C partition showed slightly different usage than Macrium Reflect.
In the end, I used MiniTool Partition Wizard to modify 1 partition only (increase the 350MB partition to 414MB, resulting in a little more than the mandatory 50MB free space). The System Image operation then completed without error.
What baffles me is why 3 different utilities give different results of partition usage (I think they all agree on partition size). I would have never thought that determining partition usage was akin to rocket science, but perhaps it is...
Attachments:
PartitionInfo.pdf ‏241 KB

Creating System Restore Points in Windows Server 2012

Searching for "Create a restore point" on Windows Server 2012, brings up a link that when clicked takes you to System Properties. Once there, there is no System Protection tab or option to create a system restore point. Windows Server Backup
is installed and functioning.
Is this feature available in Windows Server 2012? Was it replaced with Shadow Copies for Shared Folders?
Thanks for any insight you can provide.

HI,
To create a system restore point, run msconfig.exe, that will launch a UI, click the tools tab, select system restore, that should invoke a UI which asks if you want to restore to an earlier version or do you want to create a new restore point. I clicked
"create a new restore point" The problem that I ran into is that when I click that button is I receive the error: can't find "C:\Windows\System32\rstrui.exe". That's the .exe which supports the "Create / restore point' processes. I
posted a question about the missing .exe on the windows > windows 8.1 > Repair and recovery forum and was told to post it here. :>) The subject title of that post is "rstrui.exe Create a system restore point on windows server 8 Standard".
That post documents the steps that I followed trying to create a system restore point. (FYI: I'm not trying to backup any drives. I know what a system restore point is and what backup is. They are two different animals). I want to create a restore
point prior in order to prep for installing an App. So, If a problem occurs; the registry keys and app files can be backed out to some extent. BTW: Create system restore point on windows 8.1does work perfectly well, there's a different UI. I just didn't
know where to post the initial problem.regards,Steve

Open Project Created On a Mac with Windows Version?

I filmed and created a video of my friend's rap concert since he is a rapper with Premiere CS4 and Encore CS4 to make the DVD. I created this project on my Mac, but now I am trying to finish it on my Windows 7 PC which has the CS3 Master Collection as I no longer have the CS4 Collection on my Mac because I borrowed it from someone. I am trying to open the files on the PC and Encore says I cannot because it was created with the Mac version of Encore. Premiere says the file contains corrupted data! How can I fix this? If it cannot be fixed, I'll need to try to obtain the software again from the person and Adobe also needs to support cross-compatibility within their applications!

Within a few parameters, the answer is yes. So long as you are going from older to newer versions of PrPro, most should be fine.
There are a few considerations: there are more Transitions and Effects in the PC version, than in the Mac version. This is a LIST of the "missing" Transitions and Effects.This was for CS4, IIRC, but will be similar for CS5.
If you have any 3rd party Effects, or Transitions, you will need those in your CS5 on the Mac. They also must be 64-bit to work with CS5. This might be an issue.
Those are the only things that I can think to warn you about, but they CAN be considerations.
Good luck,
Hunt

Hello I have an I mac with Yosemite operating system. I installed a windows seven 64 bit on it. also i have a parallels desk top with version 10. if i run my windows without parallels my windows and my office is activated ,but if i run my parallel

Hello
I have an I mac with Yosemite operating system.
I installed a windows seven 64 bit on it.
also i have a parallels desk top with version 10.
if i run my windows without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
My problem is activating my windows and office through parallels desktop .
i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
all of my application in windows works properly through parallels desktop except
activation of office and windows .
I do not no any solution for my problem , i need for helps .thanks

It is not W10, it is the Technical Preview version of W10.
Search on the Windows forums (fora for the latinist) for activation in the TP W10.

I installed icloud for Windows on my new PC. However the folders I created on my mac icloud drive aren't showing up.

I installed icloud for Windows on my new PC. However the folders I created on my mac icloud drive aren't showing up.

Update... I restarted my computer and the folders are now there! but they are empty! So odd. They are not empty when I look at them on my mac in the same room.

Program Menu for mac equivalent to Windows Start Menu

I have just spent 30 minutes trying to find an image scanner app that I downloaded when I first got the Mac 6 months ago, had no idea what it was called, so had to trawl through every single unknown app and folder in the Applications directory.
In Windows, under the Programs menu, I used to have sub groups, such as Internet, Graphics, Audio, Utilities etc.
Is there a way to have a menu group structure/pop up menu type system in Leopard, Ok so yo have the dock for regularly used apps, but I donot want shortcuts on it for every single app on the machine.
Some sort of convenient groups menu system as in Windows that allows you quick access to rarely used apps ...especially ones that yoy have forgotten about, and cant user spotlight to find, since you cant remember their names!
Either an app, or a a way of doing it within Leopard would be better.
I have tried a few freeware ones, but wonder if anyone had any other suggestions that I may have missed
Neil

Neil Paisnel wrote:
I have already added several other apps of my own to the Utilities folder. i was wondering if I could create new folders within the Application folder and then drag them into there, but if you cant move the Apps that came with the OS, then that would get a bit messy.
You can, but sometimes software update and the installers don't like it. So you should leave them alone. I suppose what you could do is;
Make a new folder in your home folder somewhere called Apps.
Create within that as many folders as you like with the categories you described.
Create aliases by right clicking all the Applications you need to and move them into the subfolders in your new Apps folder.
Put that folder in the dock.
I had tried to create folders full of alises, but that does not work either, some apps do not give you the option to create an alias for them.
For some reason some apps (Tag 0.4.1, GPSBabel, VueScan, SuperDuper, Carbon Copy, Chronosync etc ) when you right click on them do not show a 'Make Alias' in the contextual menu.
Maybe it's a Snow Leo thing? I seem to be able to.
Link seems to be incomplete.
Sorry, the link was incomplete. Is good now.

Can no longer share my Mac to my windows PC

With 10.4, sharing my Mac to my windows PC was really easy. Now that I've installed 10.5, my PC can no longer see my mac's shared folders.
When I try to map network drive to \\192.168.1.4\shared_folder (for example), my PC just gives me an error that the "network path could not be found."
Yes, I read the online help and tried everything in "If you can’t connect to a Mac from a Windows computer"
For some reason, the systems preferences will not let me set a workgroup for my mac. I type in the workgroup name for the mac, and click save, and then when I go back to look at it again, it doesn't appear to have saved the workgroup name I typed in. So, if the workgroup name is the problem, I can't appear to fix it. why isn't it saving this information?
What the heck am I doing wrong?

To set up file sharing:
Choose Apple > System Preferences, and then click Sharing.
Select the File Sharing checkbox.
Users you have set up with accounts in Accounts preferences can access your computer by connecting to it over the network.
To refine user access to your computer and set up specific folders or volumes to share, click Add {+} at the bottom of the Folders list and select the folder you want to share.
To further refine user access, click Add {+} at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Accounts preferences), Network Users or your Address Book. Or click New Person and enter a name and password to create a sharing account. Select the user from the list and click Select.
After the user is in the list, use the triangles next to the user name to assign privileges for that use user (No Access, Read & Write, Read Only, or Write Only (Drop Box)).
Click Options and select the way you want to share your computer: using AFP, FTP, or SMB.
If Windows users will connect to your computer to share files, make sure SMB is selected, select the On checkbox next to the name of the account that will share your computer, and enter the password for that user.
Message was edited by: KJK555

Bootcamp - Create new partition and format in Windows 7

Hello All
I have Windows 7 installed on my sons MacBook Pro.
The Drive is partitioned at 500GB for Windows and 300GB for Mac.
In windows, I need to shrink the Windows drive, and then create 2 extra drives from it.
However, I can shrink the drive, but when I try to Format, it tells me that it cannot find the drive, and then it changes the drive types to all "Dynamic" including the Mac Drive.
And once this happens, I can no longer access the Mac drive during Boot, and windows will not load, as it cannot find the drive during windows boot up. And which point, I have to restore the system and it takes up to 6 hours to installed Lion, as my Internet is slowing that a cold winters day.
So, my question is the following.
How can I successfully shrink the drive.
Then Partition the FREE space
Then Format to NTFS without loosing drive type and integrity?
Thanks All
carrzkiss

Kurt Lang wrote:
I ask because what you want to do can be done right from within Windows if you're creating two more NTFS partitions out of the original.
In a single disk system, the MBR looks like this. Even Windows cannot add an entry, unless this Hybrid MBR is manipulated by hand prior to the partition creation. For example, one can create the '0xEE' entry as start=1, size=1454211071, which then allows Windows to create two more entries. If that is done by hand, the GPT and MBR are now out-of-sync. which means OS upgrades or anything done in Disk Utility will cause a data loss or create Windows boot issues.
sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0 geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 1452530904] HFS+
3: AB 1023 254 63 - 1023 254 63 [1452940544 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1454211072 - 499998720] HPFS/QNX/AUX
If the OP really wants a clean installation, pure EFI of both OSX and Windows is the best solution.

Create system alias (Mac) or shortcut (Windows)

Similar Messages

Maybe you are looking for