Create T-Code for Maintenance View

Hi all,
I created Maintenance View and i want to create a T-Code for the maintenace view.
I go to SE93 and enter the name and push a create push button. But i dont know the category i must select for the maintenace view.
Would you please help me out and please advise me step-by-step.
Thank you in advance,
Regards,
Peerasit

Follow these steps :
1. go to transaction SE93 , give your own transaction code say ztran_tab, for maintaining your ztable.
2. Click on create button and check the radio button Transaction with parameters (PARAMETER TRANSACTION) and click on the tick button.
3. In the next screen enter default values:
transaction : SM30
check the check box skip initial screen
4. Scroll down you will find a table control for default values
Name of the screen field | value
VIEWNAME | your ztable name
SHOW | X
Save your work.
Now as you have created a custom transaction for maintaining your ztable this transaction can be called from any program with CALL transaction 'XXX'.

Similar Messages

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

What r the trns code for maintenance view, help view and projection view

hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari

What is the Different Types and Usage of Views
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View (SE11)
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish

To Find transaction code for maintenance view J_1BT001WV

Hi Gurus,
I have to find transaction code for maintenance view J_1BT001WV. Plz tell me how can i do it.
regards
Rajesh

Hello Rajesh
There are no specific transactions defined for this view (except for SM30 ).
The IMG activities where the view is used are (check OBJSUB ):
SIMG_ORFB_J_1BT001WV (Assign business place)
J_1BASSBRANCH (Assign CGC branch to plant)
In order to find the view in the IMG call transaction SM30, enter the view and push button Customizing.
The following activites are found on ERP 6.0:
South Korea: Basic Settings for Value-Added Tax     Assign Business Place
Business Place (Generic)                                        Assign Business Places to Plants
Official Document Numbering (Indonesia)                 Assign Business Places to Plants
Nota Fiscal                             Assign Business Places to Plants
Official Document Numbering (Thailand)                    Assign Business Places to Plants
Regards
Uwe

Transaction code for maintenance view

Hi all
I created a maintenance view and I also generated the table maintenance dailog for the view.Now I am changing the values using the transaction code SM30.But I have to create a transaction code for this maintenance view to access it and update the table instead of using sm30 for this purpose.Please help me.
Thank You.
Regards
Giri.

Hi
create transaction using 'se93'
select parameter transaction and give below attributes
Transaction code ZTX1
Transaction text Maintain View ZSDCZTVIEW
Transaction SM30 Screen 0
From module pool
Name of screen field Value
VIEWNAME = ZSDCZTVIEW
UPDATE = X
Thanks

How to find T-CODES for maintenance view of custom tables?

Hi,
I have a list of custom tables for which maintenance view is generated. Also, many of them might have a T-Codes assigned to them.
I need to know how to find out these T-codes?
Is there some table which maintains these or a function module which can give the t-code name?
Help will be appreciated.
Thanks.
Shreyas

Hi shreyas,
1. one way is
2. goto se93
3. Press Ctrl F
4. Expand the search criteria (from button on toolbar)
5. In program name enter SAPMSVMA (This program is for sm30)
6. In transaction code enter Z* or Y*
regards,
amit m.

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

How To Create ABAP Code For HR Context Sensitive Structural Authorization

Hello,
We have created a HR Custom Program which IS NOT built off the PCH or PNP Logical Database. As a result, we need to manually create ABAP code for HR Context Sensitive Structural Authorization Check in our custom HR program. Via HR Context Sensitive Structural Authorizations, we are restricting access to personnel numbers and the underlying HRP* tables.
Any assistance would be greatly appreciated with the identification of the SAP standard function modules (Ex. RH_STRU_AUTHORITY_CHECK, HR_CHECK_AUTHORITY_INFTY, HR_CHECK_AUTHORITY_INFTY , etc) used in HR Context Sensitive Structural Authorization Check, how they are used to control HR Structural authorization (P_ORGINCON), and some sample code.
Thank you in advance for all your assistance,
Ken Bowers

Hello Ken
You can use the interface methods IF_EX_HRPAD00AUTH_CHECK to get the same structural authorization as you can see in PA20/PA30. You need to use the methods set_org_assignment and check_authorization for this purpose. For more information you can refer to include FP50PE21 from line 237 onwards till 270.
Regards
Ranganath

How to create transactoin code for a predefined variant?

Hi, I have created one variant for a custom report.How to create transaction code for the report with that variant?

When you create the transaction in SE93 select the Program and selection screen(Report transaction) type not
the transaction with variant(Variant transaction)

How to create t.code for report painter report created using CJE5

Hi All,
I'm trying to create T.code for a report painter program created using CJE5.
I using the D_SREPOVARI-REPORTTYPE as "RE" and
D_SREPOVARI-EXTDREPORT as KP 01RPSCO_X <report name>
If I provide spaces between KP 01RPSCO_X <report name>, its not allowing spaces.
If I didn't provide the space then its saying that "report does not exists"
Please let me know how to overcome this issue?.
What this KP & 01RPSCO_X stands for? Is this always constant?
There is a similar kind of transaction in other system which Looks like this " KP 01RPSCO_X <report name>" spaces in between
I dont understand why its not allowing spaces in this system. As its in different system i cant make a copy of this transaction and change the parameters.
Edited by: Mr A on Feb 18, 2010 5:28 PM
Edited by: Mr A on Feb 18, 2010 5:54 PM

thanks for giving me the link.
I searched for all these link in SDN before posting itself.
my issue is how to give the value for the parameater EXTDREPORT.
If i give spaces for the value KP 01RPSCO_X <report name>, its throwing error, T,code its self is inconsistent.
if i didnt give spaces its i'm able to create the t.code, but when i execute it, its giving error message saying "report does not exists"
but if i go to CJE5, that report is there.
thanks

Problem creating T-Code for report(type Form-report)

Hi all,
Can T-Code be created for reports which are of type'form report '.
Here is the problem in detail :-
I have to use transaction 'CJE3' where four reports got created.These reports are of type 'form report'.Currently I am not able to create the transaction for the reports in se93 transaction.
Please advice on how I can create T-Code for these reports.
Regards,
Anirban

Hi Dutta ,
this report is created by Report painter for this Reports if u want to create tcode please follow the steps.
se93 ---> take option parameter transaction .
1.default valuse for transcation is START_REPORT
2.skip initial Scree = kich this one
3.screen = 0.
4.kich all GUI check boxes
5.last one , u have to entry values like this
D_SREPOVARI-REPORTTYPE = report Type
D_SREPOVARI-REPORT = name of the report in the bottom scree.
Regards
Prabhu

Create t.code for report painter in CO-PA

Dear experts!
Now, I'm getting some issue about creating t.code for report painter in CO-PA.
Really, I don't know to create t.code for report painter that is created and run in t.code KE30.
Help me to solve the issue!
Best regards, Huy

Dear Huy,
To create a tcode for report created on the KE30:
1 - Get the parameters from your Z report, on table TKEB2 (on field REPID)
2 - On the SE93 create your tcode with option "Transaction with parameters"
2.1 - On the field "Transaction" fill with START_REPORT
2.2 - Choose the option "Skip inicial screen" and "Inherit GUI attibutes"
2.3 - On "Default Values" use the follow parameters:
D_SREPOVARI-REPORTTYPE <RE>
D_SREPOVARI-REPORT <NULL>
D_SREPOVARI-EXTDREPORT <APPCLASS SUBCLASS+TABNAME REPID>
*This information you got in table TKEB2, eg:
KE 01CE1CPFL ZDREB01
I hope the information has been useful,
Regards,
Melina

Problem when creating a tcode for maintainence view

when i'm trying to create a tcode for maintainence view of table ,i used to fields view name: here i gave the table name;
update : x
now when i activated and executed the tocde the screen is showing some abnormal values in the display..this is happening in the development server..can any one help me on this..i can send the screen shot if required..thanks in advance,,
challa

hi,
thank you.
i have done the same...but here i dont want to skip the intial screen...so i didnt check that box..now comes the problem ..i can see some boxes with 'x' at the end of the paarameters..give me u r mail id i can send u the screen shot..
thanks,
challa

Create T-Code for Maintenance View

Similar Messages

Maybe you are looking for