Create Tasks for target group.

Hi guys.
I want craete Tasks for target group.
But, I don`t see "Employee Responsible" in "Create Business Transactions for Target Group Members".
How can I set Employee Responsible for Tasks?
Thanks.
Sergey.

Hi Sergey,
What i observed while creating Task from TG is we dont have fileds from where we can assign Emp responsible, as in Task Partner detemination(Standard) Access sequence we use for Emp responsible is User, and when we create Task from TG sytem takes User's Id as a Emp reponsible i.e. using which user u r creating Task from TG.
Regards,
DD's

Similar Messages

Personalization (Cross-Selling Rules for Target Group) in E-commerce

Hi,
Could any one suggest solution for the query...
Scenario: Personalized Cross-Selling for Target Group in a Webshop (E-Commerce-B2B Occasional User Scenario). The Cross Selling is to
appear only for Target Group, but the system is prompting the Cross Selling
Rule for both Target Group aswell Global. The Config details are below
mentioned.
1. In Method Schema (11) we maintained Cross Selling Methods for Global as well
as Target Group.
(CRM_MKTPR_PP_CS_GL_READ & CRM_MKTPR_PP_CS_TG_READ).
(I did remove Global Method for testing, but still it is appearing for Global
Target Group)
2. Created Cross Selling rules in CRM for Target Group Target Group & is
Activated.
3. Target Group Modeling done in Segment Builder.
4. Target Group Assignment done in the webshop.
5. Application Administration related tasks (clearing done).
6. Product Catalog Updated Replication is done aswell.
7. Simulation of Product Proposal is done using program
"CRM_MKTPR_PRODUCT_PROPOSAL"
Please suggest me if I miss anything to recommed Cross-Selling rules only to the Target Group.
Thanks in Advance,
D u r g a r a o

Cartweaver
http://www.cartweaver.com/
Web Assist Power Store
http://www.webassist.com/support/ecommerce-options.php
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Changing archived status for target group or segmentation model.

Hello, CRMies!
In SAP CRm WEBUI i set "To archive" flag for segmentation model and now it has status "Archived". The problem is hat it became inactive now and i can't reset this status. I didn't execute any archiving reports, just set the flag on. I was looking for any FM or reports to recover the status.
Anybody knows how to unarchive segmentation model or TG?

Hi Katya,
as far I know the segmentation model is archived with the next scheduled archive run once the status 'to be archived' is set. The status can be undone before the archive run, once this is archived there is no way other then generating the segment again.
Please refer to the online help about further information:
Archiving Segmentation Elements - SAP Library
For target groups andproduct segments there is also a read program in transaction SARA, which you can use to display the archived segmentation elements again at a later point in time, if required.
Furthermore, the information structure SAP_CRM_MKTTG_I is available for target groups and product segments in the transaction SARA.
You can not only read, but can also load archived segmentation models into the system. However, you should only use this function when it is absolutely necessary. For further information, see Reloading Archive.
Since you cannot load target groups or product segments into the system, you need to generate these again to be able to use them.
I hope this helps.
best regards,
Johannes

Actions creating task for multiple partner functions

Hello Masters,
Need help in below scenario.
We are using actions in quotations. Different actions gets triggered as per status of quotation.
ex: Status: manger approval request: Task to be create with action for manager
Status: Manger approved: Task to be created with action for Sales employee.
I have configured action profile. My actions are partner function dependent.
Partner functions are different for manager and sales employee.
But when action is getting triggered it is creating task for both partner functions.
How can I avoid this? Does though we say action is pertner function dependent is it true or it is actually partner function catagory dependant. In my case partner function category is same for manager and sales employee. The partner function category is "Employee"
looking for your guidence
Thanks
Kushal

Hi Kushal,
The partner function category is same - employee and hence it is triggering actions at the same time.
You may have to see if you can assign a separate partner function category to meet your requirement.
Hope this will be useful
Thanks and Regards
DJ

Retreiving the guid for target group selected for trade promotion in CRM 7

HI,
I am working on building API for creating trade promotion. I need to find a way where I could retreive the GUID of the target group to be assigned to the trade promotion.
Please share you thoughts on this. Let me know if we could use any standard function module or SAP class which could be used to achieve the objective.
Awaiting your replies.
Thanks

Check this function module
CRM_MKTTG_TG_H_GETLIST_OW

Error in Creating task for user decision

Hiee friends .
I am new to workflow .I was going through the workflow tutorial [building a workflow from scratch] available at the elearning section[ABAP eLearning Catalog].
I am praticing abap in sap netweaver available for free download from sap ag[its not having any functional module ].
I am able to create the userdecision and then when i try to create task in the activity section of yes userdecison.
There i am getting a error while choosing the basic data section.
In netweaver i don't have any functional module ,so i taking the flight booking system .
I am choosing the Oject category as BOR Object type
and then the object type as Sbook
and method as display .
But when i am choosing save button a error is coming telling me that "Prefix Number : entry missing for system NSP client 000" .
I clicked on the message it's telling me to maintain table T78NR in customizing and create an antry for the sytem in question and the current client .
Please help me out .....

I tried to give prefix number in the tcode-OOW4.[i gave it 500]
Prefix number : 500
SAP System id : NSP
Client ID : 000
But while saving it telling me that
"Preix number 500 is not in the customer namespace".
Is there any standard prefix number , or as i am doinf it in netweaver trail version there are problems .
Plse help me out ..
What would i do now ?

Tables for Target Group

Dear experts,
I have been looking for the table that stores the target group.
Could anyone please help?
thanks
Mehmet

CRMD_MKTTG_TG_H & CRMD_MKTTG_TG_T

Workflow creating task for user in Outlook

Is it possible to create a task in outlook for a specific user via workflow? My Boss want to have every user informed via mail that there is a new element in a list (that works fine) and one User should have a task (even better a complete to do list) in
his outlook task tab.

Hi Elite,
Based on your description, my understanding is that you want to create the tasks for users in Outlook with workflow.
I recommend to use workflow to create tasks in a task list in SharePoint and then sync the task list with outlook by clicking the button Connect to Outlook in the ribbon of the task list.
After that, the tasks created in the task list will be automatically synced to Outlook.
Please refer to the link below for detailed steps:
http://netizenapps.com/blog/?p=6
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Create datasource for processing group text

Hi All,
I want to create a datasource in R/3 to pull the text for Processing group in BW. Currently only codes are pulled in BW for processing group. It would be great help if somebody can provide me details regarding the same. A step by step solution will be of gr8 help.
Thanks

HI
In R/3 execute the TCODE RSO2
Then create a text data source.(ZZ...)
Then assign the table from which you need to get the data, or create view for the required fields in SE11 first and then assign the VIew in RSO2 in the field View/tables,
Then Save and generate Data source.
Then come to BW select the application component under which you created the data source.
Replicate the data source.
Then assign info source.
Extract the data.
Regards
RaM

Creating Task for Maintanance Project !!!!

Dear all.
When i open my maintainance project, i got to System landscape->Change request-> Create task-> i get the error "Project is not released, Project Cycle cannot be created "
How do i release the project..
Secondly ON clicking the Refresh TAB, I GET THE error "errors during synchronization of landscape".
ny idea???

Hi Suzzane,
What is the error log you are getting in slg1 after you clicked "refresh"?The error log will provide some help.
Thanks and regards,
Avinash

Unable to create multiple transport target groups in SLD

We have multiple R/3 QA systems but just 1 XI QA system and we need to test interfaces with all R/3 QA client at the same time. My XI development team has asked to explore whether its possible to create multiple target systems.
Currenlty R3_dev has R3_QA1 as target business system, we would like to add R3_QA2 as target system for R3_dev.
There is a "add/change" option in Transport tab and there is a grid which seems to imply that multilple entries are possible.
I have added R3_QA2 to the Group "Qa_Bus_Group" and was able to replace
R3_QA1 with R3_QA2 however I was unable to create multiple target systems.
I was wondering if anyone ran into this issue and any suggestions are welcome. Thanks in advance.

Hi Syed,
           You can create multiple target systems only for different business system groups.If all the business systems like R3_QA1,R3_QA2, R3_QA3 belong to the same business group "QA_BUS_GROUP" , then you can have only one among the three system as target.
           So R3_DEV can have only one system as target either R3_QA1 Or R3_QA2 or R3_QA3 since they belong to the same business group "QA_BUS_GROUP".
            If there are three different business system groups then you can have 3 target systems that correspond to their respective business system groups ,in this case source business system can be assigned to the 3 target systems that belong to different business system groups .
           Since that is not the case with your scenario, you cannot create multiple target systems.
Regards,
Laawanya

SCOM 2012 - Is there a way to create a class/target/group based on the presence of a folder?

I need to create monitor(s) for an application, but the application services are different on all the servers. Usually I would find a application service that is common among all the servers I want to monitor to create the target,
but this does not exist. There are no common services for this application. However, every server does have a common folder in the Program Files on the C: drive (i.e. "xyz" folder exist on every server for the application).
Is there a way to create a target based on a folder in the Programs Folder?

Please refer to the following, which is quite exactly fit your requirement.
http://msdn.microsoft.com/en-us/library/bb437613.aspx
Roger

How to create disks for disk group ?

Hello Experts
I am RHEL 5 with Oracle 10g, I am configuring ASM. What will be steps to create disks that can be used in disk group and I am using normal redundancy so how many disk groups are needed(min.)

Sunil,
Well to be honest, so far I have not tested ASM over RHEL/OEL 5. I demonstrate ASM over 10g using DD command , creating virtual devices than binding them as a raw decices. So far, this technique is very successful, though I have not tested the same over RHEL5.
The article quoted uses asmlib driver. Its good but not mandatory to work with asm, at least for the learning purpose. So I wont' recommend to do the labor. What you can do is the following,
# mkdir /asmdisks
# chown oracle:dba /asmdisks
# su - oracle
$ dd if=/dev/zero of=/asmdisks/disk1 bs=1k count= 4000
$ dd if=/dev/zero of=/asmdisks/disk2 bs=1k count=4000
$ dd if=/dev/zero of=/asmdisks/disk3 bs=1k count=4000
$ dd if=/dev/zero of=/asmdisks/disk4 bs=1k count=4000
# losetup /dev/loop1 /asmdisks/disk1
# losetup /dev/loop2 /asmdisks/disk2
# losetup /dev/loop3 /asmdisks/disk3
# losetup /dev/loop4 /asmdisks/disk4
# raw /dev/raw/raw1 /dev/loop1
# raw /dev/raw/raw2 /dev/loop2
# raw /dev/raw/raw3 /dev/loop3
# raw /dev/raw/raw4 /dev/loop4
# chown oracle:dba /dev/raw/raw1
# chown oracle:dba /dev/raw/raw2
# chown oracle:dba /dev/raw/raw3
# chown oracle:dba /dev/raw/raw4
# chmod 660 /dev/raw/raw1
# chmod 660 /dev/raw/raw2
# chmod 660 /dev/raw/raw3
# chmod 660 /dev/raw/raw4You should be able to see these logical devices with the DBCA. I have not tested the same over RHEL5 so far so no guarantee that it would work over there or not and I don't have a RHL5 box with me at the moment to test the same too. But over OEL4, RHEL4 this works dandy. Do give it a try and post the feedback.
HTH
Aman....

How many ways we can create authorization for user groups in sap query reports

Hi Gurus, I am getting a problem when I am assigning users to user group in sap query report .The users other than created in user groups are also able to add &change the users .So please suggest me how to restrict users outside of the user group.
Please send me if u have any suggestions and useful threads.
Thank You,
Suneel Kumar.

I don't think it can be done. According to the link below 'Users who have authorization for the authorization object S_QUERY with both the values Change and Maintain, can access all queries of all user groups without being explicitly entered in each user group.'
http://help.sap.com/saphelp_46c/helpdata/en/d2/cb3f89455611d189710000e8322d00/content.htm
Although I think you can add code to your infoset and maybe restrict according to authority group, i.e.:
Use AUTHORITY-CHECK to restrict access to the database based on user.
Press F1 on AUTHORITY-CHECK to find out how to use it in the code

Create folders for brush groups, like swatch folders CS4

I enjoy the folders in the swatch palette,
can we add something like this for brushes,? right now it groups brushes by brush type when listing brushes, scatter, art etc,
I`d like to be able to drag/drop brushes into different folders, and name the folders, then be able to save those folders out as brush groups (brush libraries), but not necessarily all the brush folders or brushes on that palette, just the brush folders we select.

I`d also like to be able to, in "list view" of the brushes palette, as you hover over a brush name, a pop up window about 4x4 cm appears showing the shape of the pattern of that brush, the thumb view doesnt give me the name feedback I need and the list view omits the pattern shape,
The pop up of the brush head also allows me to identify the exact shape variation of the brush in list view, I prefer list view as identifying a brush by name is important, thumb view is not large enough and besides this I identify the words quicker, but then the brush head pop up would allow clearer identification of different variants within a brush group, helpful when your using all kinds of floral swirl brushes and they look very similiar, different organic brushes with slight variations like this are also hard to "name' and by name identify the differences unless you can see a clear visual of the brush head..

Create Tasks for target group.

Similar Messages

Maybe you are looking for