Create the SSL (Server Security Layer) Connection .

Hello sir
Here im using the client server connection using throuth TCP Connection .
Now i need to establish the SSL (Server Security Layer)
TCP Server and Client Working Properly .
so any one can help me out.
Thanking you.

Now i need to establish the SSL (Server Security Layer) Take care to distinguish it from Secure Sockets Layer.

Similar Messages

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.

I tried to redeem a digital download copy of a movie and was presented the following error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
Any guesses on what it is and how to resolve it?
Thanks

Hi
Abhilash Francis,
Could you tell us your scenario? What's your project? Is it a WCF service?
Looks like this is not a code issue.
Just from the error information,
it seems that you do not configure the service certificate very well so as to Server was unable to process request.
I am not completely sure what the real scenario is, but it might be a problem of that It is a WCF services application, please check these following articles to configure the service certificate.
If not, please feel free to let me know.
How to: Configure an IIS-hosted WCF service with SSL
Could not establish trust
relationship for the SSL/TLS secure channel
Hope this helps.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Could not establish trust relationship for the SSL/TLS secure channel with authority SharePoint ssis connectors

Hi All,
I am using SharePoint List Connectors to load the data from Sharepoint list to Sql server.
I have created an ssis package and attached to the SQL agent job in works fine
SharePoint Source dev url : http://company.dev.com (working fine)(http)
DB server:(server\instance)
I thought all i good and can test with the uat sharepoint url.
I have changed the configuration url yo point to uat.(https)
SharePoint Source dev url : https://companyuat.dev.com (working fine)
DB server:(server\instance)
Suddently it fails when with the following error:
In both the cases i am running the agent job from the same db server
DB server:(server\instance)
Error Message:
Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source: Data Flow Task SharePoint List Source [1] Description: System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority 'companyuat.dev.com'. ---> System.Net.WebException:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Is there is workaround to reslove this?Any inputs highly appreciated as it is time to move to production :(.
Thanks
Ravi
Ravi

This is the important error: The remote certificate is invalid according to the validation procedure.
Your SharePoint server certificate is invalid. You have to either correct your certificate or make your SSIS client machine explicitly trust the server certificate.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Step by Step : How to Create an SSL Server Certificate (Part 3)

How to Create an SSL Server Certificate (Part 3)
In the previous part you have completed step 10, now you are almost there.
Step 11:
This is another very important step.
Leave the settings as is or tick more options if you know what you do.
Step 12:
Again leave as it is.
Step 13:
Another important step !
In the DNS Name field enter the host name(s) separated by spaces (or commas), e.g.
myserver.name.private myserver.dyndns.org
You can enter your local IP if you wish.
Step 14:
Certificate Assistant now procedes to create your certificate. Within a few seconds you should see the new certificate in your Keychain.
Switch to Server App (if at this stage Server App has crashed, don't worry , re-open Server App and proceed.
Repeat step 2 described in Part 1 and select the new certificate from the drop-down menu of available certificates.
You may want to use this certificate for all services (iChat, iCal, Mail, Web) or create different ones.
If you use the same certificate for all services the name of the certificate is diplayed next to "SSL Certificate", if you don't you will see "Custom" instead.
Addendum:
1. Do not forget to open port 443 in your router to enable https connections.
2. Enable SSL in your iCal account settings if you wish.
Enjoy your server !

Hi,
Are you talking about the Mercedes leaderboard ad? Because that look a lot more complicated than "fade in - fade out" images?
Anyway... I am looking at the easiest way to create a banner ad with fade in - fade out images that I have created in illustrator.
This tutorial helped me alot.
http://www.youtube.com/watch?v=gFw-1D8yaMs&NR=1
cheers

Set-IRMConfiguration failed with error "Cou ld not establish trust relationship for the SSL/TLS secure channel."

Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTM

Hi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support

"Could not establish trust relationship for the SSL/TLS secure channel"

During the configuration of DUET_E , when calling the DUET Application from SharePoint, the following error is shown :
"Could not establish trust relationship for the SSL/TLS secure channel with authority 'MYSAPNW702SERVER:8001'"
I have already seen the Post :
Error in DUET Configuration at SSL
This mentions the error, but does not provide any answers on resolution.
The DUET_E troublshooting guide suggests that the SAP Standard SSL Certificate is added to SharePoint Central Admin > Security > Manage Trusts
This has also been done.
We are using the Standard SAP SSL Self signed certificate - not one signed by an external CA.
Can anyone provide any guidance ?
Thanks in advance.

Hi Min,
reading through your first post the problem might be the CN of the certificate. If you used the Wizard or the default way to create a self signed certicate, it is probably created with the CN server.domain (the fully qualified name of the server).
However, when you created the BDC models the URLs pointing to the WSDL is probably only the servername (at least that is what I would assume after seeing your error message).
Because of that SharePoint calls the SAP Duet server with the severname, but the certificate presented by the SAP system is not the servername, but the fully qualified servername. Because of that -- although SharePoint trusts the certificate -- the URL and certificate do not match and you get the error "Could not establish trust relationship for the SSL/TLS secure channel with authority 'MYSAPNW702SERVER:8001"
If that is the case you have two options:
1) you go to STRUST and create a new SSL certificate that has a CN of only the servername. Then you export this certificate and trust it in SharePoint
2) or -- and this is the way I would recommend -- you try to adjust the URL used in the BDC model. Usually you get only the servername (and not the fully qualified DNS name) when you have not specified the profile parameter icm/host_name_full. Which URL is currently used when you start transaction SAML2 or SOAMANAGER? If you have not yet set icm/host_name_full, then give this a try.
Regards,
Holger.

Could not establish trust relationship for the SSL/TLS secure channel with authority

Hello everyone, I need to establish a connection between my HTTPS WCF hosted in Windows Azure Web Role and my Windows Store App Client. The service is actually exposed for testing purposes using a self-signed certificate.
I have installed the certificate in Personal and Trusted Root Certification Authorities in Current User and Local Manchine.
In the Windows Store App, I create the service reference pointing to the cloud https service, then edit the manifest and create a new declaration to Add a New Certificate, I checked Exclusive Trust and Auto select, pointing to Root storage name and
my self-signed certificate.cer.
The result is the following exception in the IntelliTrace stack:
Exception:Caught: "The remote certificate is invalid according to the validation procedure." (System.Security.Authentication.AuthenticationException)
A System.Security.Authentication.AuthenticationException was caught: "The remote certificate is invalid according to the validation procedure."
Time: 19/01/2015 04:42:33 p. m.
Thread:Worker Thread[17080]
Exception:Thrown: "Could not establish trust relationship for the SSL/TLS secure channel with authority 'appchallengewhi.cloudapp.net'." (System.ServiceModel.Security.SecurityNegotiationException)
A System.ServiceModel.Security.SecurityNegotiationException was thrown: "Could not establish trust relationship for the SSL/TLS secure channel with authority 'appchallengewhi.cloudapp.net'."
Time: 19/01/2015 04:42:34 p. m.
Thread:Worker Thread[17080]
Appreciate any help, to solve this with the approach of WCF Service Reference in Windows Store App.
Note:
If I call the HTTPS service using a Console App it works very good using the following the code:
ChannelFactory<IAgentService> factory = new ChannelFactory<IAgentService>("basicHttpBinding_IAgentService");
ServicePointManager.ServerCertificateValidationCallback = (sender, cert, chain, error) => true;
IAgentService wcfProxy = factory.CreateChannel();
Thanks in advance,
RC

Maybe not implemented.
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/2dab2818-8f4c-4474-a7a1-db2cbfb40d40/accepting-client-certificate-for-https-connections?forum=winappswithcsharp

Could Not Establish trust relationship for the SSL/TLS secure channel Sharepoint Web services

I am trying to updateList items into a sharepoint list from the xml document stored in my shared drive in remote server. To make that work i wrote down a Powershell Script that utilizes Sharepoint Webservices Api Updatelistitems function to perform the acitivity.
I ran the script over in Dev environment it works, Then i went into QA that Works too. At last i am now in PROD and agains ran the script i am now receicing following error:
New-WebServiceProxy : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel
All of my servers dev, QA and PROD web apps are encrypted by Https 443 using Cerified root certificate. Powershell script i am running are mirror copy. System accoutn i am using has owner privileages to sharepoint site and its list.
Am i missing something here, what is blocking this traffic i have no clue.
Thank You

are u using self singed certificate?
also check this http://www.poshpete.com/powershell/new-webserviceproxy-and-ssl
http://www.brainlitter.com/2012/03/13/sharepoint-2010-and-cert-trust-could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Problem when we created the managed server to configure different ports.

I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu P

Dear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew

SChannel error- The SSL server credential's certificate does not have a private key information property attached to it.

We have a public SSL certificate that allows for Active Directory sync with LDAPS on port 636 with our email smart host. This was working fine and suddenly stopped working and we are now getting SChannel errors Event ID 36869. There were no changes made
to the Exchange server, the firewall or the DC which holds the certificate. I have run a new certreq from the DC and then re-keyed the public SSL certificate and re-installed 3 times but the error does not go away and AD Sync with the vendor
fails. When I run LDP.exe the connection on port 636 fails with "cannot open connection" and the system event log throws the S Channel event 36869 "The SSL server credential's certificate does
not have a private key information property attached to it" There is no software firewall set on the DC. When I run Certutil -VerifyStore MY it shows the current certificates as well as the revoked and expired certificates
correctly. Certificate 0 is the public cert and is listed with Server and Client authentication, the FQDN of the server is correct and "Certificate is Valid" is listed. The private cert is Certificate 1 and has server and client authentication, the
FQDN is correct, Private key is not exportable and it ends with Certificate is Valid. I do not see a point in re-keying the cert again until I figure out what the root of the problem is. I have read in some forums that the private cert should not be set to
expire after the public cert but that does not make a lot of sense when in a situation like this the private cert is of course newer than the public. In fact it is too early to renew the public cert. I have been troubleshooting this for a few days and at this
point I would have to drop my AD sync with the vendor to LDAP in order to add new users. I do not want to do that for obvious reasons and I do not want to have our spam filtering and email archive service running without Directory sync. Any help would be greatly
appreciated.

Hi,
Have you tried this?
How to assign a private key to a new certificate after you use the Certificates snap-in to delete the original certificate in Internet Information Services
http://support.microsoft.com/kb/889651
Best Regards,
Amy

My Firefox no longer works, it will not go to any website and offers the message "The proxy server is rejecting connections". I had the same problem in IExplorer but was able to fix it. I did not choose a proxy server, ever. How do I fix this in Firefox?

I changed out my wireless router, from a Linksys to a Netgear. Everything seemed to work fine, but shortly afterward Firefox could not be used to find any websites, and gave me the message above. The same happened with Internet Explorer, but a tech representative for my ISP directed me to the page where "proxy server" was incorrectly checked and it fixed the problem. I don't know where to go in Firefox to find the same or a similar page. My laptop continued to work fine for some time after, but eventually developed the same problem. I uninstalled and reinstalled Firefox, with no luck, and all desktop shortcuts based on Firefox are inoperative. I just keep getting the message that the proxy server is rejecting connections. Since I did not select a proxy server, I don't know how to deselect it.

No idea what "tried everything" means.
Here is how you troubleshoot a password problem.
Go to your email providers web mail page and verify that you have a working username and password by logging into your account there. If you cannot log in there, look for the link to reset your password. Your email password is administered with your email provider.
Once you have a working password you need to remove any stored passwords in Thunderbird and replace with the new, working password.
From the menu bar select''' Tools-Options-Security-Passwords-Stored Passwords'''
Remove the passwords for the problem account. Close Thunderbird and restart it. You will be asked for a password. Enter the new password.
No menu bar with Tools? Press the '''alt '''key.
FYI: Thunderbird settings are stored in a different file from the program. Removing the program and reinstalling just keeps you busy for a little while and rarely fixes anything. As you have seen the old settings are picked up when Thunderbird is reinstalled.

A fatal error when attempting to access the SSL server credential private key. Error code 0x8009030d. Windows 8.1.

Hi,
We develop a server-side application which receives incoming https connections using self-signed certificate. It was all ok while we were using Windows 7 or Windows 2008 as OS, but when our clients started installing Windows 8 as server OS they encountered
big problem: application got unavailable in few hours after start.
In event logs we have following:
A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10001.
After restart, application recreates certificate and all works normal few hours till next fatal error.
This
article did not help us. And I repeat that this error appears only on Windows 8 (we tested on Windows 8.1). Windows 2012 Server we did not test yet.
How we can solve this problem?
Best regards.

Hi,
Since this article released in 2008,I suspect the code mentioned in this article doesn't supprot Windows 8.
And since the certificate was written by C#,I suggest you submit a new case on MSDN Forum as they will be more professional on your issue:
https://social.msdn.microsoft.com/Forums/en-US/home
Regards,
Kelvin hsu
TechNet Community Support

Create the SSL (Server Security Layer) Connection .

Similar Messages

Maybe you are looking for