Create Time Master Inspection Characteristic (MIC)

Hi all,
Pls tell me how to create an time based mic (Inspection Charactsrstic) where the Format of the values should be 00.00 ..12.00
I tried creating it with 2 decimal places but the result is like 0.00 and 12.00,the first digit is being deleted
your help is appreciated
Regards

Dear colleague,
the two types of characteristics of the standard SAP are
qualitative (for example, "product color") or
quantitative (for example, "material density").
Please see the online-documentaion:
http://help.sap.com/saphelp_47x200/helpdata/en/61/
2db434d6e3681ae10000009b38f83b/frameset.htm
There is no possibility to convert numrical fields into date in
results recording. Your request might reachable using classification
of characteristics. Please see the following online-documentaion:
http://help.sap.com/saphelp_47x200/helpdata/en/ec/
62ab0a416a11d1896d0000e8322d00/frameset.htm
under
Entering Basic Data / Format / Data Type: Time Format/Date Format
Thank you for contacting
Maria

Similar Messages

How can copy master inspection characteristic from plant1 to plant2

Now I have 2 plants
I already created all master inspection characteristic that i need by QS21 for plant1
Is there any way I can copy all master inspection characteristic from plant1 to plant2 ?

i'm creating inspection plan( QP01 ) for material , but all the materials & plans are in plant 2 (ss03)
now i have to assign MIC to inspection plan , i only can select MIC of plant 1 ,and plant text would show"plant 1" ....
so i want to create the same MIS for plant 2 , is there any way i can mass copy MIC from plant 1 to plant 2 ?

How to call "long text" of master inspection characteristic in ALV

Dear All,
we have created customized QM report in ALV which shows Result, Valuation and Short text for each MIC against each inspection lot. Can we call long text also in the ALV.
Please guide how to call it in ALV?

just implement some function on the ALV toolbar, read the long with FM READ_TEXT and show it to the user e.g. using CATSXT_SIMPLE_TEXT_EDITOR.

Master inspection characteristic -delete

Hi all,
MIC's were assigned wrongly to around 1000 recipes.
Is there anyway / any transaction code can be used for removing/ deleting those MIC's from recipe's.
I am not going to replace, i want to delete from recipes.
I am looking for some Mass transaction which is available in ECC 6.0?
or only option is write some program to remove?
Need some experts opinion.......
Thanks
Sami

Hi,
You go to Change Master Recipe (C202) transaction and you select the operations in the operation tab and click on View button.
Go to tab General and click on Inspection characteristics button and select the characteristics such as 10, 20, 30, etc and click on Delete icon after that the MIC gets deleted in the screen.
Please check & revert back to me.
Regards,
Mohan

Master inspection characteristic

Dear All,
if a characteristic has two unit of measures then how can we manage it .e.g, if we test temperature with one method then unit will be centigrade and we same characteristic is tested by another method then unit of measure is farenhiti. please guide me how can we manage this type of characteristics.

Basically, you can only have one UOM per MIC. So it is not possible to do what you are trying to do.
What most of the posters here are saying is that you should,
1) pick one form of the mic or the other. Have the techs in the lab always use the same one. It prevents lab errors if the techs know they always record in either C, or F. You should of course select as the lab standard the one you report out most often to customers.
2) which ever is the standard for the lab, create a calculated characteristic of the other. Where you have to report the form that the techs don't record in, add the calculated characteristic to the plan. It will then always be calculated for the techs.
FF

Automatic Valuation and Closing of Master Inspection Characteristic during

Hi Experts,
I have a requirement wherein some of the MICs need to be valuated manually and others automatically by the system.
I want that the characteristics should get automatically valuated and closed on putting the results in result recording screen.
I have tried many options but failed. I don t want to change the plant settings for result recording and want it to happen at characteristic level.
Please suggest, if there is any setting for this.
Thanks
Arun

check your sampling procedures and use the appropriate valuation mode to evaluate a char. manual or automatic. The evaluation mode in the sam.proc drives the behavior of char. evaluation. For MIC's - based on their evalution requirements assign the samp.procedure in the task list.
Thanks,
Ram

Date format in Master inspection characteristics

Hi All
I have a requirement where my user wants to enter the date format in the master inspection characteristic. For example we want to add date of manufacture and the date of expiree as a inspection characteristics and during the results recording they want to enter this characteristics in a date format.
MY question is can we have a master inspection characteristic with a date format, if so what all the settings are required.
Please suggest.
Thanks,
Quantum.

>
quantum wrote:
>Can i use characteristics in the inspection plan instead of the master inspection characteristics. I am using Work bench transaction code CWBQM to create an inspection plan.
Direct characteristic you can't use in inspection plan. If you want to use characteristic in IP then create chara. (CT04), then assign this charac. as class chanr.(QS21) in MIC. Now you can use this MIC in inspection plan.
Hope this helps.
Thanks!!!

Config settings for Decimal places in Master Inspection Characteristics

Hi,
can any body tell me where to do the configuration settings for decimal places in master inspection characteristics
i want my limits to be 1.234
i want 3 decimals after point
Regards,
Raj

Hi,
Please go through the below link.
http://www.freesaptutorial.com/how-to-create-master-inspection-characteristic-in-sap-qm-module/
While creating the MIC in QS21 after entering the control indicators you will get Quantitative data screen.
In that screen you can enter the decimal places, UOM, target, lower limits etc
Regards
Hari

Inspection Plan & MIC status.

Dear SAP,
We have a requirement that QC will creat the MIC & Inspection Plan in status created, and QA will review and change the status from Created to Release.So where or in which object level i can put control so that QC not able to select the Status 4 for inspection plan, and Release for MIC.
Regards,
Asif.

Dear Craig,
I have created a new roll will basis help.and attached the below condition in the object you can refer dow.But then to user able to create MIC & Inspection plan in release mode.Please explain what would be the issue.
MIC Status Table & Field Name (Object Name-Q_STA_QPMK,Table-QPMK, Field-LOEKZ)
Inspection Plan Status Table & Field Name (Object Name-Q_ROUT,Table-PLKPO, Field-VERWE)
QSTATMERK Master Inspection Characteristic Status 1
STATU Status 1
Regards,
Asif

QM view material master (Inspection Type)

Hi there,
 I didn't understood the pragmatic usage of the check box inspection by configuration & inspection by characteristics.......that can be set for the inspection types..........
Please enlighten me ......
Thanks
Kaushik
Message was edited by:
 Kaushik Choudhury

If you set this indicator, the system takes the configurations from the sales or production order into account when inspection lots are created and changes or supplements the inspection specifications in the task list or material specification.
The indicator only works for the following inspection lot origins:
o 01 Goods recipt for purchase order
o 03 Production
o 04 Goods receipt for production order
The indicator cannot be used for the inspection lot origins 10 and 11.
Example
When creating the sales order, the customer defines that the pH value of the product to be manufactured should be between 5.0 and 5.5. When an inspection lot is created for the resulting production order, this tolerance is then copied into the inspection.
Dependencies
The specifications are only copied into the inspection lot if there is a link between the class characteristic and a master inspection characteristic.
Hope this helps you.

Record results per Product, not per inspection characteristic

Dear,
Is is possible, in transaction QE51N to record results per product (or serial number) rather than per characteristic?
Today, I can only see a result recording per characteristic. For example: for inspection characteristic 1, I enter all the results for each product, then I go to inspection characteristic 2, etc. I would like to enter my results per products, i.e. for product 1: enter results for inspection characteristic 1, 2, ..., and then do the same for product 2, etc.
Is that possible?
Regards,

NehSAP wrote:
What are the parameters you entering to execute QE51N? I believe you are ececuting this transaction for chara not inspection lot or material. Make sure you are not entering MIC in intial screen throgh variant.
>
> If you execute QE51N for particular one lot then you can see all assigned MIC to that lot in transaction output & you can record them one by one.
>
That is what I do. I execute the transaction for one particular inspection lot. However, when I enter into the record results screen for this particular inspection lot, I first have to "enter" into one of the master inspection characteristic, and then start recording per product (or serial number). What I would like to have is to "enter" into one product (or serial number), and for this particular product, enter all the master inspection characteristics I have previously defined.
If you still don't see what I mean, can you give me your e-mail so that I can attach an image
Oh yes, and by the way, is it possible to execute the transaction qe51n based on the criteria "production order" instead of on the criteria "inspection lot" or "plant" or whatever. I know that you change it in the layout, but I really can't find the production order on the "hidden fields"
Regards,
Edited by: MrFitch on Nov 8, 2011 9:11 AM

Create Material Master Record with Text

Hi, I am looking to create material Master Data via ABAP. I currently have some code that creates the Master Data Characteristic value I want, but I need the text as well. Can someone tell me what I need to do to add the text for the Master Data Characteristic value?
Here's what I have using CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
TYPE-POOLS: RS, RSSM.
DATA: T_ZFREETEXT LIKE STANDARD TABLE OF ZFREETEXT.
DATA: T_INFO TYPE RSSM_S_MINFO.
DATA: RETURN_STATUS TYPE RSARR_T_IDOCSTATE.
DATA: RETURN_SUBRC LIKE SY-SUBRC.
DATA: MSG TYPE RS_T_MSG.
DATA: L_R_ACTIVATE_MASTER_DATA TYPE REF TO CL_RSDMD_ACTIVATE_MASTER_DATA.
INSERT ZFREETEXT INTO TABLE T_ZFREETEXT.
CALL METHOD CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
 EXPORTING
 I_IOBJNM = '0MATERIAL' " Technical name of InfoObject
 I_CHAVL_ENQUEUE = RS_C_FALSE
 I_T_DATA = T_ZFREETEXT
 I_S_MINFO = T_INFO
 I_MONITORING = RS_C_FALSE
 CHANGING
 C_T_IDOCSTATE = RETURN_STATUS.
IF SY-SUBRC <> 0.
 RETURN_SUBRC = 'Error happened'.
ELSE.
 RETURN_MSG = 'Process Completed Successfully'.
 CREATE OBJECT L_R_ACTIVATE_MASTER_DATA
 EXPORTING
 I_IOBJNM = '0MATERIAL'
 I_P_Q_HAVE_TO_EXIST = RS_C_FALSE.
 IF SY-SUBRC = 0.
 L_R_ACTIVATE_MASTER_DATA->ACTIVATE(
 IMPORTING
 E_SUBRC = RETURN_SUBRC
 CHANGING
 C_T_MSG = MSG ).
 ENDIF.
ENDIF.

Dear Kenneth,
do you need to add master data during load of transaction data in planning scenario? If yes, you can do this with a planning function of type exit in the INIT function module.
I think you've to use the table ETO_CHAS (table for char. combinations) and all kind of char. combinations has to be transfered.
data:
l_s_chas type /1SEM/_YS_CHAS_"YOURCLIENT"YOURPLANNINGAREA",
l_r_co_area type range of /bi0/oico_area,
l_s_costcenter type /bi0/pcostcenter.
field-symbols:
<f_coar> type /bi0/oico_area,
<f_cctr> type /bi0/oicostcenter.
select * from /bi0/pcostcenter into l_s_costcenter
 where co_area IN l_r_co_area
 and objvers = 'A'.
<f_coar> = l_s_costcenter-co_area.
<f_cctr> = l_s_costcenter-costcenter.
INSERT l_s_chas INTO TABLE eto_chas.
endselect.
Regards, Clemens

Screen Exit QS21(Create Inspection characteristic master)

Hi All,
Does anybody know some screen exit in QS21 T-CODE? I need to add some z fields at QPMK(Inspection characteristic master) table and I need to reflex those fields in QS21 t-code. Any suggestion?
Thanks in advance.
Regards...

Dear,
Follow these steps,
Go to Transaction SFAW: module pool SAPMQSDA, screen group QUAN, function 'Modified fields', 'Change'
On the following dialog box, enter the field QPMK.
Choose 'Enter'.
Place the cursor on the field QMKST-TOLERUNTEN and choose "Copy reference".
Choose 'Enter'.
Choose 'Generate screens'.
Transaction SFAW: module pool SAPMQSDA, screen group QUAN, function 'Modified fields', 'Change'
On the following dialog box, enter the field say QPMK-TOLERWBIS.
Choose 'Enter'.
Place the cursor on the field QMKST-TOLEROBEN and choose "Copy reference".
And add filed wat you want.
Save your chhanges.
Regards,
R.Brahmankar

Error QP 146 : Inspection Characteristic used several times in Insp Plan

Hi Experts,
I am getting error message while saving Insp plan which uses same qualitative master inspection characteristics more than twice.
I observed that, it doesnt happen for certain inspections characteristics used mulitple times, but for some it does.
There is no difference between the control indicator of both. I have been debugging to find the reason and have not got any success.
I know that there is an unanswered post already on the same topic. Still posting this in search of luck
Can anybody help ?
Thanks,
Nandi

Yes.. if you are loading via a BDC I have heard other people complain about the issue. It is only a "hard" error when running via BDC.
To the best of my knowledge there is no work around for this with regard to the MIC's. It always has been a warning and there is no way to get rid of the warning. As I said, it has been a pain in the @ss for me over the years.
As far as the BDC I suggest you post this in an ABAP forum and see if there is a way to progammatically trap for this error and recover from it. SAP does provide their own program for loading inspection plans. I don't know if you have looked at this or not. I don't know if their program allows for this type of situation or not. Most places have opt'ed to write their own ABAP for loading since the one SAP provides can be somewhat tedious and frustrating to get running and to set up the files for.
FF

Run time error while create Vendor master via MK01

Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
Vetrivelan

Hii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks.

Create Time Master Inspection Characteristic (MIC)

Similar Messages

Maybe you are looking for