Create TO automatic by using wave pick for outbound delivery NLC (STPO)

Dear all,
In Cross company code process, we have to create TO automatic by using wave pick for outbound delivery NLC (delivery type NLCC). Time data in outbound delivery NLC have been fulfilled, but there is no TO created, what is wrong in this? pls help.
Thanks

Hi Kishor,
Is there any requirement of TO when ECC system is Interfaced to EWM.
As per my understanding we have terminology WT & WO in EWM.
Regards,
Rock

Similar Messages

Reverse Picking for Outbound Delivery

Hi all,
As we know that LT0G does not work for HU managed Storage Location. For reversing Picking of HU in WM
Alternative option available: From Outbound dlvry process we have to execute following steps in Sequence in VL02N
Step 1. Select HU & press button Delete HU assignmnet
Step 2. Edit --> Copy Pack Qty as Delivery Qty
Can anyone plz tell me:-
what is the Function module or BAPI for above mentioned step 2
OR
Do anyone have developed code for this?
Many Thanks in Advance for your help
Edited by: Hiren N. Panchal on May 5, 2011 12:25 PM
Edited by: Hiren N. Panchal on May 5, 2011 12:29 PM

See if BADI_HU_PACKING_QTY will work.

BAPI for outbound delivery without order reference???????????????????

hello folks
i want to a bapi for transaction <b>VL01NO</b>. this transaction is used for creating outbound delivery <b>wihtout a order reference</b>. I did a search but was not able to find a bapi pls help.

Hi,
Could you please send me the sample code for BAPI_DELIVERYFREE_PROXY_CREATE? I am using the IDOC for outbound delivery w/o order reference. I didnt find any standard process code for this..
Any suggestions on the same??
Thanks,
Prasad

Once I create a html5 animation using the 'Toolkit for CreateJS' in flash, how do I then insert it..

Once I create a html5 animation using the 'Toolkit for CreateJS' in flash, how do I then insert it into a webpage via Dreamweaver:
This has been sending me round in circles for over a week - can anyone let me know how I do this or can they point me in the direction of a tutorial? Thank you in advance - d;-)

There are some tutorials on Adobe site:
<http://www.adobe.com/devnet/createjs/articles/getting-started.html>
<http://tv.adobe.com/watch/adc-presents/toolkit-for-createjs-part-1-designing-game-assets/>
<http://tv.adobe.com/watch/adc-presents/toolkit-for-createjs-part-2-adding-game-interactivi ty/>
The parts 1 and 2 are videos about 10 minutes each while the first link is a detailed article that you can print and practice on your machine.
Hope this helps.

Create a work order using the BAPI for IW31

Hi,
      I want to create a work order using the BAPI for IW31 tr. can any one help me with the program description.
Full points will be awarded for the useful answers.
Thanks and regards,
Sunil

hi,
first use fm "bapi_po_create".
then use fm "BAPI_ACC_GL_POSTING_POST"
The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
     No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
     In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
     A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM).

Create a formula variable using replacement path for current date

Hi All,
I created a formula variable using replacement path for current date.
But when i used this variable am getting an error message saying .
" This Variable cannot be used in this query".
Could you please let me know the reason?
Thanks,
Zehra

Hi All,
Thanks for all your help...
I just found a solution via the below link
in Bex Formula variabel, Current calander day(sap exit) missing.
Here he is trying to use the existing formula variable.
My doubt here is, Even i could not find this varaible in BEX formula variable, But could see this in BI Content path as mentioned in the above link. DO i have to transport this varaible , or i simply can activate it in production?
I just could find this in BI Content but not in MetaData Repository.
Thanks,
Zehra

Goods Receive for Outbound Delivery Without Reference using MIGO

Dear Colleague ...
We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
(1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
(2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
(3) The first 2 (two) cases work just find with MIGO. We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
(4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5". We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
(5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
Appreciate for any thoughts or input on the above. Many thanks,
Alvon Sibarani

use transaction mb0a it will work for the scenario.

Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.k

I tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
       gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
       lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
       git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
       gwa_item_data TYPE bapiobdlvitemcon,
       git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
       gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
       git_return    TYPE STANDARD TABLE OF bapiret2,
       gwa_return    TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900002'.
gwa_item_data-dlv_qty         = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900002'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900003'.
gwa_item_data-dlv_qty         = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900003'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '000020'.
gwa_item_data-dlv_qty         = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '000020'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
    header_data    = gwa_header_data
    header_control = gwa_header_ctrl
    delivery       = lv_delivery
TABLES
    item_data      = git_item_data
    item_control   = git_item_ctrl
    return         = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

How do we do Automatic freight preperation for outbound delivery in SAP

How do we do Automatic freight preperation for outbound delivery in SAP

'Automatic freight preperation'? New concept that SAP came out with? Or is it Freight Calculation? If it is the latter, activate Shipment and Transportation and you have it in a jiffy. You need to work on VT01N, possibly VI01. Plenty of work in SPRO, too
Regards
Ramana ND

Plan order created for Outbound delivery

Hi Gurus,
For some materials, When MRP is run it generates plan order for Outbound material with same qty as that of outbound delivery.
What setting should be done as not to generate plan order for outbound delivery.
thnx in advance.

Hi,
There is nothing in message control tab for outbound parameter(we20) and even there are multiple changes in delivery.
What we do is as soon as the delivery is created . Z trnx is executed which changes the dec whse status A(Relevent ) to B (distribution) simulteneously outbound Idoc is created and delivery details send to whse.
Normally there will be one outbound idoc per delivery , but in this case there are 2 (duplicate)

LSMW for Outbound Delivery

Hi,
I am not able to find an LSMW for creating GR for outbound delivery. I tried using recording in MIGO but it did not work. Also MB1C is not working for outbound delivery. Please help.
Regards,
Anubhav

Hi
I think it is better to write a Z program/ BDC to have a mass GR creation of an outbound delivery.
or
You have an Auto Goods receipt using confimations. If we activate Auto GR in customizing for Confirmation control key. Once confirmations(ASN) is created a GR will be created automatically.
Hope this helps
Regards,
Sasi

Manual (Dynamic) Interim Destination Storage Type instead of 916 for Outbound delivery T.O

HI,
we would like to create transfer order manually for outbound delivery.here both source and destination need to be given manual
i know that the interim storage type 916 given in the interface movement type , while T.O creation for the outbound delivery
we would like to have the destination interim storage type as a manual entry so i kept both destination and source storage type blank,and system permits to do picking (T.O Creation )
Created Transfer Order, with source and destination details and confirmed T.O.
But when i do the goods issue getting error as
Storage bin MT1 does not exist (check your entry)
Message no. L9009
when i checked table LIPS- LGTYP and LGPLA , both fields are empty.
Please let me know how can i make this functionality.
Thanks.

The requirement is , my interim storage areas are real storage areas,for which goods are issued the stock goes to interim storage area and PGI will be made after verification ,but the interim storage area is dependent on the customer , not a fixed one which we will know only when we deliver the goods .
I use that process too, with verification on the final storage area before shipping, but what I do is to use SD in conjunction with WM. I use the gates in the Outbound Delivery, to separate the stock, since WM creates a bin in 916 for each delivery document and I can use that to know in which gate each quant is.
That way, everything goes to 916, but I have a report that tells me which stock is near each gate, so I can run the audit process before shipping.
It's not completely standard, but WM standard is very hard to use without an additional UI layer on top anyway.

BAPI_GOODSMVT_CREATE update VBFA or not for Outbound Delivery?

Dear Gurus,
When I try to use BAPI_GOODSMVT_CREATE to do the goods receipt for the outbound delivery as the replacement for MIGO transaction, I use 01 as movement code and the bapi create material document and updating MSEG. But it doesn't update VBFA so the items is still showed in MIGO and cannot post there (because it is already moved in BAPI in program.)
Anybody have any suggestion for this situation? Thanks a lot and points will be rewarded.

Hello,
When you use BAPI_GOODSMVT_CREATE to post Goods Receipt for outbound delivery, reference documents at header and line items should be delivery number and line numbers (BAPI2017_GM_HEAD_01-REF_DOC_NO, BAPI2017_GM_ITEM_CREATE-DELIV_NUMB_TO_SEARCH & BAPI2017_GM_ITEM_CREATE-DELIV_ITEM_TO_SEARCH). Then only document flow will be updated.
Thanks,
Venu

BAPI for GR for Outbound delivery

Hi Gurus,
   I need to create a Goods Receipt against an Outbound Delivery ( movement type "101" ) using the BAPI BAPI_GOODSMVT_CREATE
user is using MIGO transaction for the same. There he will choose the GOODS RECEIPT for OUTBOUND DELIVERY and enters the delivery number. The movement type "101" is used.
I tried passing gm_code = 01 and mvt_type = 101 and mvt indicator as u2018Bu201D , but Iu2019m getting an error message 'ENTER PURCHASE ORDER NUMBER'.
I donu2019t have PO number . I just have shipment number from which I have found open outbound deliveries and now I need to do GR for each of the Outbound delivery.
Please let me know if Iu2019m passing the right gm_code and mvt indicator to the BAPI or if Iu2019m missing any parameters. Iu2019m passing the following parameters to the BAPI ?
Delivery. No. , delivery item, Doc. Date , Posting Date , ref document num , Quantity, Storage Location, External qty, External qty unit, matnr, werks .
Your help is greatly appreciated.
Thanks in advance.

Thanks for replying. I went through the entire BAPI documentation but did not found anything related to GR for outbound deliveries.
I searched some older posts in sdn related to this problem but almost all are unanswered question.
I'm passing gm_code = 01 , mvt_type = 101 and have tried all movement indicator like 'B' , 'F' and blank.
here is what I'm passing in my Bapi.Please let me know if I'm missing something or if I'm passing something incorrectly.
gm_header-pstng_date = sy-datum.
      gm_header-doc_date   = sy-datum.
      gm_header-ref_doc_no = wa_lips-vbeln. "The Outbound delivery Number
      gm_code-gm_code      = '01'.
     MOVE '101'              TO     gm_item-move_type.
      gm_item-material             = wa_lips-matnr . "Material Number from the Delivery.
      gm_item-plant                = wa_lips-werks . "Receiving Site.
      gm_item-stge_loc             = wa_lips-lgort. "Receiving Storage Location.
      gm_item-entry_qnt            = wa_lips-lfimg.
     gm_item-entry_uom           = wa_lips-vrkme.
      gm_item-ENTRY_UOM_ISO        = wa_lips-vrkme.
      gm_item-mvt_ind              = 'B ' .
      gm_item-deliv_numb           = wa_lips-vbeln.
      gm_item-deliv_item           = wa_lips-posnr.
      gm_item-DELIV_NUMB_TO_SEARCH = wa_lips-vbeln. "delivery number
      gm_item-DELIV_ITEM_TO_SEARCH = wa_lips-posnr. "delivery item
if I donot pass any value in mvt indicator the error I'm getting is 'Update control of movement type is incorrect (entry 101 X X)'
if I pass 'B' in mvt indicator error is 'Material document data and PO data do not match (Plant)'
if i pass 'F' , erro ris 'Order not found or not permitted for goods movement'.
Please help me. This is kind of critical issue. or please suggest if I can do GR for outbound delv in any other way.
Thanks...!!!!

Create TO automatic by using wave pick for outbound delivery NLC (STPO)

Similar Messages

Maybe you are looking for