Create TO (transfer order) for different materials?

Can we create one TO for diffrent materials in LT09 transaction. Or is it like for a single material i can create a single TO ? In LT09 tcode Can i add materials o the item details tab after giving the stor unit no. dest and source bins?
Thanks
VV

yes you can create if you refer same document (PO,Order).
eg:if you do a GR for a PO with 3 line items(3 different materials).Then you can create a single TO for all the 3 different materials.But if you refer different PO for each line item,then it is not possible.
regards
venkadesh

Similar Messages

How to create separate Transfer Orders for different items in a single D/O?

Hello gurus,
In my D/O there may are Item A and Item B. I would like to have separate transfer orders created.
1 T/O for Item A and another T/O for Item B. Currently, I get the message "L3131 No partial picking allowed for delivery documents". System does not allow.
I have checked D/O Doc Type LF and Item Cat TAN. I don't see any field which allows partial picking (unless I missed it?).
How / Where can I configure to allow such feature?

Hello,
I had exactly same problem, and I found no answer on the web.
A friend, Anderson Ranéa, Senior WM Consultant, helped me...
So... you need to set the flag PartialPick at: SPRO/LE/WM/Shipping/Interfaces/Shipping/Define Shipping Control/Shipping Control per Warehouse Number.
Regards.

Customization for create 2 Work orders for different vendors against 1 PR

Hi,
What are the customization settings to create 2 work orders for 2 different vendors against 1 PR with half-half quantity?

thank you Mario.
Actuly its infrastructure cmpany & user wants create Purchase order(service work order) for two different vendors with reference to single PR with alocating 60% quantity to 1st vendor & remaining 40% to another vendor.
user allready created Po for 1st vendor (60% Quantity).
Now system showing error " Quantity is allready full for reference PR"
I want to know what is the procedue to solve this issue & customization.

How to create automatic Transfer Order for posting change delivery mvt.321?

Hi,
We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
Thank you,
Regards,
Madhavkrishnaa.

Pls see the customizing.
SPRO: Logistic Excution>Warehouse management>interfaces-->Define Quality management

How to create a transfer order for stock lying in consignment?

Hi All,
I'm stuck creation of Transfer Order. The scenario is for Intercompany Stock Transfer.
The delivering plant has the requested material as consignment stock only (in a bin in storage type HRC). When the delivering plant attempts to create TO for Outbound Delivery, the error says "System can not find storage bin". When I enter the source storage type and bin, the system says 'Storage type HRC doesn't allow negative stock figure".
My question is, how to enable the system to search the consignment stock?
Thanks,
Rana

Hi,
Pl refer OSS note 13006 which says
It is not possible to transfer vendor consignment stock from one plant to another plant (movement types 301 to 306 for special stock 'K').
A stock transfer by means of a delivery is also not supported (movement types 641, 643, 647).
Cause and prerequisites
This program function is not supported.
In order to implement this program function, it would be necessary to find a solution to the business-related aspect of the valuation problem:
Since the consignment price of a material from a vendor can be different in the two plants involved, it would be possible to manipulate the consignment liabilities towards the vendor prior to consignment withdrawals by performing a transfer posting and thus transfering the consignment stock to a suitable plant.
Solution
You can post the stock transfer in two steps:
1. Post the stock issue in the issuing plant using movement type 562 in combination with the special stock indicator 'K', for example.
2. Post the stock receipt in the receiving plant using movement type 561
in combination with the special stock indicator 'K', for example.
Hope this is helpful.
Regards,
vijay

Error while creating a transfer order for delivery note.

Hi Gurus,
I have already created an outbound delivery. I am creating a transfer request as a basis for goods movement in the warehouse and to print the picking list. so i use the path:
Logistics -> Sales and Distribution -> Shipping and Transportation -> Picking -> Create Transfer Order -> Single Document.
Now here i enter the warehouse number, plant, delivery. when i press enter i get error "No items that are to be picked were found".
I went to the following IMG path -- Enterprise Structure --> Assignment --> Logistics-Execution --> Assign Warehouse number to plant/storage location.
Assign the warehouse to the plan and storage location.
Still i get the same error. Could some one help me out here?
Thanks in advance
Amit

Hi,
can you check whether Warehouse number exists and transfer order creation is required or not at Delivery document under Picking tab

Creating a transfer order for a Billed Delivery

Hi,
After billing a delivery, wich already had picking confirmed, the picking field in the delivery was blanked.
Is there a way to create a new tranfer order for this delivery, even if it is already Billed?

Hi,
Thanks for the answers. After some tests we find the solution!
In this case we change the billing status of the delivery to "A", then was possible to create a new transfer order, without cancel the billing.
In Brazil we can´t cancel the billing document after the goods to have left.
Thanks,

How to create collective Transfer order for a collective outbound delivery?

Hello All
I created a group of deliveries and I got two outbound documents, now I want to create a collective Transfer order it gives me an error does not exist in T311 however the individual outbound delivery whiten the group could be picked
Can any one help me to solve this
Regards
Jacopo Francois

hi
Transfer order will create based on delivery document . U got two delivery document number.
So goto LT03
enter delivery document number
execute save.
again goto LT03
enter another delivery document number execute, save it
regards
krishna

Problems when creating a transfer order for moving storage units

Hi,
When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
is displayed. When i use the FM again after this message then the TO is created correctly.
When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
Does anyone have a solution for this problem?
Thx in advance.
Kind regards,
John Nijburg

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Creating transfer order for delivery with ABAP

Hi Experts,
I'm using L_TO_CREATE_DN to create a transfer order for delivery note...
Is it possible to use this function or another one, to create a transfer order for one position of the delivery note ?
Regards,
David

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

Stock transfer order for differrent divisions

I would like to create the stock transfer order for different divisions say 18,19. In SPRO i could set the shipping data for only one division for a plant. Is there any possibility that i can assign different divisions for same supplying plant.

Hi Sahana,
Division is defined as per the material. So, why you need to put a material belongs to one division to some other division.
I dont think SAP allows for it.
Reward if it helps.
Bidhu

Issue during Transfer Order for Process Order

Hello,
Can anyone tell me how can I create a Transfer Order for picking items once the Process Order is created.
I have created a Process order and released it abd trying to create a Transfer Order via LB13 but it says " No data available for criteria specified:
I am missing some steps before I create the TO or something is missed in the configuration.
Can someone tell me the steps after creation of Process Order until the confirmation mainly the WM steps.
Please let me know ASAP
Thank you
SAP FAN....

Hi,
As far as I know in case of PrdOrds you can:
1. Book GI (mvt 261) and after that start to process the TR from LB10.
2. Set up WM-PP interface (http://help.sap.com/saphelp_47x200/helpdata/en/c6/f840fb4afa11d182b90000e829fbfe/frameset.htm)
2a) Set SAP to create TR when releasing and saving the PrdOrd
2b) LP10
(In case of pick parts...)
Regards,
Csaba

Create transfer order for moving storage units

Hello guys,
I need to create transfer order for moving storage units, the same with the transactions LT09, I found this FM 'L_TO_CREATE_MOVE_SU' but no work, somebody have an example for this FM, thanks a lot!

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Creating Transfer Order for a Material document

Hi,
I am transferring the Unrestricted stock from one material to another material through Movement type 309.
I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
Regards,
Kishore.

Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri

Creating Transfer Order for Delivery with Specified Source Bin

Hello,
My requirement is to create a pick transfer order for an outbound delivery.
<b>L_TO_CREATE_DN</b> works perfectly well, however, it does not let me to specify the source (fixed) bin in my warehouse. It actually executes the bin determination routine to pick the source bin for me, which is not acceptable.
<b>L_TO_CREATE_SINGLE</b> won't work as my destination bin is a dynamic bin, and this FM does not allow to set LTAP-NKDYN.
So, I'm stuck. LT03 actually allows the user to input source bin information, so I'm saving BDC as my last option, but wanted to see if anyone here has other ideas.
Thanks in advance!
R.D.

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

Create TO (transfer order) for different materials?

Similar Messages

Maybe you are looking for