Create Transaction (of CRM system) as Receiver thru "RSBBS" TCode for query

Hello,
My requirement is to Jump to a SAP-CRM transaction from a BEx query.
Thru TCode : RSBBS, I selected "TRANSACTION" as receiver of a query, then I selected "CROCLNT002" as the source, then in the Report field I gave the SAP-CRM Transaction "crmd_order" and selected OK.
Then, I tried to execute the query thru Web, On the Context Menu's 'Go To' property, I clicked on the Transaction, It gives me the following errors:
"No Web server maintained for the presentation of log. system CROCLNT002"
"Jump target cannot be executed"
" An error occurred with the report to report interface during the jump"
Do I need to execute some other steps also in order for this to function smoothly. Thanks to help me in understanding the loop hole.
Best Regards,
Sumita

Sumita,
This is 'coz your CRM client CR0CLNT002 might be a WINGUI and not a WEBGUI interface. CRM does provide a WEBGUI for its CRM 4.0 or later if you need to be jump to a transaction from Web report.
You can jump to a WINGUI from a BEx report as an alternative. So you will have to make a choice.
Doniv

Similar Messages

How to extract Taxonomy data from MDMGX transaction of CRM system

Hi all,
I have a requirement on product master where in i have to upload data into MDM as taxonomy table from MDMGX transaction in CRM system. Is it possible? If yes can anyone guide me the stepwise procedure as i observed it involves the Function Modules like MDM_COMM_CAT_ATTRIBUTES_EXTR.
Thanks in advance
Samatha

Yes,
You can very well do it. You need to define parameter " Hierarchy ID" in function module for exceptional cases in MDMGX. This hierarchy ID you can get using Transaction COMM_HIERARCHY in CRM..
This will solve you requirement....
Thanks and Regards,
Shiv

Business Content for Bill Up transaction in CRM system

To all Experts,
I'm currently working on a project that requires Bill Up transactional data ( Source Table: CMSD_BU ) to flow from CRM to BW system. I'm looking for Business Content that can fulfill this requirement. However, till to date, I couldn't find any information of such Business Content. I'm not sure if such BC exist. Can anyone help if you have experience implement this data flow?
When searching for the DataSource / Extractor, I found BW Extract Structure CMST_BU_BW and CMST_BU_BW_C in the CRM system. But couldn't find any DataSource for both extract structure. Not sure if we need to install any support pack in order make the BC available in the system. Please help if you have any idea.
Thanks in advance.
Regards,
Hui Pin

Hi Shalini,
The document is replicated from ECC to CRM without any errors.
For this document I just want to create follow up transaction in CRM.(I dont want to change the document in CRM)
The follow up transaction is in display mode. this is my problem.
Hi Rekha:
I have done following setting in CRM to create follow up transaction in CRM for the document which is replicated from ECC to CRM.
1)     Defined the Copying Control for Transaction type
2)     Defined Copying Control for Item categories
3)     Defined Item category determination when copying
Thanks in advance,
Regards,
-Rahul.

Error in SLG1 transaction in CRM system

Hi exports,
We are getting error in application log in SLG1 T.code in CRM system while the system monitoring.
Error Conclusion :Determinaiton of Component from SCR Failed"
Details are:
USER External ID Object Text Programme Mode
DDIC Collector for None-R/3-Statistic SAP Global Workload Statistic Collector SAPLSAPWLN3_COLLECTOR Batch progra
When double click on error log we are getting message test :
>> Collector for DSR statistics started
TOTAL aggregation of daily data started
Determination of component from SCR failed
Any help is greatly appriciated..
Thank you
Regards,
Ram

Hello
This error message is caused by the SAP_COLLECTOR_FOR_NONE_R3_STAT background job. If you don't have SAPCCMSR agent installed to collect the DSR statistics, you can un-schedule (stop) the background job.
Regards
Joaquin

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

Error while creating Campaign in CRM

Hi all,
When I am trying to create Campaign in CRM, system is throwing an error saying that "Can not get RFC destination for SEM".
We are not using SEM in our project.
Can anybody suggest me how to avoid/rectify this error?
points will be guaranteed.
Thanks in advance.
Regards,
Rahul.

Hi Rahul,
As long your are not activate/ use the key figure planning or budget,
you can use without SEM. There is setting in SPRO to set this.
Also in your CRM Campaign, you do not use scenario planning.
Hope this helps,
Gun.

Error while downloading Contacts from R/3 to CRM system

Hi All,
I am trying to download Contacts from R/3 to CRM system.
Through Initial Download. For this i have set filters through Tcode: R3AC1
as on KNVP and KNVV for the field VKORG.
As we have our requirement to download contacts based on or differentiating
on 'Sales Org".
We have downloaded our Accounts properly without any errors.
But for Contacts we are facing issues such as one or more extra
relationships are getting created between Contacts and Accounts other than
its original Contacts.
Means already existing contacts are creating more relationships after
download.
But a unique feature is visible for all, All those with false
contact-account relationships.
Contact has field value for 'Address type' missing while the same address
type field is properly added for correct relationships. ( please find attached the screenshot of the same)
Any pointers in which direction we should proceed for the solution would be
appreciated.
Thanks in advance.
Cheers,
Sharad

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Sales Document Creation in CRM System

Dear all,
We are implementing CRM 5.0 and ECC 6.0 (IS-Retail) for our client. As per the Business Process Customer creation take's place in CRM, which uploads Customer Records into ECC system.
Material Master (Article), Pricing Procedure and Condition Types are being maintained in ECC system only.
Now the new requirement is to create Quotations in CRM system, in turn it has to upload into ECC system. We have to enable or maintain all article data, Pricing Data and Discounts in CRM system also.
I don't know how could we exchange the Article Master Records (Material), Pricing Procedures and condition types between ECC system.
I have expertise in CRM Marketing. by getting basic understanding of CRM and ECC data flow landscape, Middleware Settings and Object downloads, I have confidence to map the requirement into SAP successfully.
I request you to educate me on this scenario, your help and suggestions will be highly appreciated.
Thank you
Raghu ram.

Hi,
i'm not quite sure about ECC retail, but for sure, as per CRM 5.0 and ECC 6, depending on your scenario, you may not need whole complete set of pricing, nor the condition tables to be maintained in CRM.
you can use minimum pricing which is basic condition type PR00. once the quotation is saved in CRM, during the replication process, the pricing will be determined in the ERP and passed back to CRM. so when you look into CRM quotation document, you will be able to find all the condition types maintained in CRM.
however, this scenario is not suitable if you require customer to review the pricing before saving the quotation, let say internet sales / e-commerce. then in that case you'll probably need to have complete set of pricing in CRM.
hope this helps.

Hierarchy in CRM system?

Hi all
I have created a Base Hierarchy in CRM System by name " BASE_PROD" and assign some category to this hierarchy.
Now the problem lies in:-
1. I am not able to assign certain set types which I want to use as they are used in other Base Hierarchy ( These Base hierarchy are copied from R/3 to CRM)
2. I don't want to use the hierarchy which are copied from R/3 to CRM and want to create them in CRM system itself.
3. When I try to delete these Base Hierarchy in CRM, system issue error Massage " Hierarchy R3PRODSTYP may only be changed in original system ER1CLNT200".
(here ER1CLNT200 is the R/3 system).What is the menu path in R/3 for deleting/changing these Hierarchy.
4.Is there any way to use same set types which are already assign to other hierarchy/Category.

Hi
Proceed as follows to remove one or more objects from the hierarchy:
Select the objects to be removed by positioning the cursor on each of the objects and activating Select/deselect node (for entity types) or Sel./desel. sub-tree (for data models).
Select Modeling object ® Delete assignment.
The objects are automatically removed from the hierarchy.
You cannot remove an object from the hierarchy without also removing all its subordinate objects.
Delete assignment only removes objects from the data model hierarchy in question.
Cheers

SHDO-how to create transactional ,screen , standard variants for a t code..

hi experts,,,,,
1)can u explain the use of it.......
how to create diff type of variants.......
2)......how to give batch number assignment alpha numerically.......
here in the system only numbe\rically available, and i have to assign the batch number internal assignment.........for a particular production order.

Hi,
<b>creating Transaction Variants</b>
Step 1:
Execute transaction SHD0 and create a Transaction Variant against the original transaction.
Step 2:
As soon as you press the create button, the original screen of the transaction will appear. After pressing any button/tab on the screen a menu variant screen will appear. Make sure to check any field or tab or any button you want to disappear from the menu functions. Press the exit and save button when you are sure that no further settings are required on sub-screens (if present). After pressing the exit and save button another menu variant screen will appear. Press the save button here and save as a local object or under any development class.
Step 3:
When you are back on the Transaction Variant (SHD0) screen, press shift+F6 or click the goto menu and press the create variant transaction button. Through this transaction SE93 will be executed. Enter the transaction name you want to create and any other required field and now press the save button.
Step 4:
Now execute the transaction you create through create Transaction Variant and enjoy the results.
Case two for creating Transaction Variants
Step 1:
Create a dialogue transaction through SE93 and enter the program name and screen number of the original transaction you want to make a variant on (e.g., PFCG). Press the save button and check whether the replica transaction (PFCG) has been created successfully by executing it on a new session.
Step 2:
Execute transaction SHD0 to create a Transaction Variant. Specify the transaction name (replica of PFCG) which you have just created and create a Transaction Variant against the replica transaction.
Step 3:
As soon as you press the create button, the original screen of the transaction will appear. After pressing any button/tab on the screen a menu variant screen will appear. Make sure to check any field or tab or any button you want to disappear from the menu functions. Press the exit and save button when you are sure that no further settings are required on sub-screens (if present). After pressing the exit and save button another menu variant screen will appear. Press the save button here and save as a local object or under any development class.
Step 4:
When you are back on the main screen of the SHDO (Transaction Variant) click the edit option on the menu tab and activate Standard Variant. Through this a Standard Variant will be assigned to the transaction specified (replica transaction).
Note: Make sure you activate the Standard Variant against a replica transaction and not on the original one.
Regards
Sudheer

Request tcode for create inspection points

Hi Experts,
We uses inspection points to record muiltiple result,
Because there are different persons to create inspection points and record results,
if there are tcode for create inspection points, we can do it more convenience。
Thanks .
Denis.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again.
Edited by: Thomas Zloch on Feb 18, 2011 5:10 PM

Hello Mr. Amorsen,
Follow Charm_create step by step using customer name:
1- Create a new transaction using t_code SE93 (E.g.: ZCHARM_CREATE )
2 - Copy the program : CHANGE_REQUEST_CREATE_SOCM to Z using SE38
3 - In SE93, change the program to Z created in step before
4 - In SE80 Copy the function group Change-request_socm to Z
5 - copy the function modules too (will appear a pop-up asking for this)
6 - Change the include ; LZCHANGE_REQUEST_SOCMTOP
     IN LINE 30 : gc_processtype(4) TYPE c
            VALUE 'ZDCR', "process type for change request
     Change value to ZDCR
7 - Activate all
8 - In SE38 report: ZCHANGE_REQUEST_CREATE_SOCM , change the call function SOCM_CHANGE_REQUEST_CREATE to Z
9 - activate.
Done !!!
<<text removed>>
Regards
Claudenir Bispo
Edited by: Matt on Oct 5, 2011 9:39 AM

Creating BADI for datasource enhancement in CRM system

Hi,
I am working on SAP BI/BW. This is the first time I am working in CRM system with CRM datasources. Facing some problem for datasource enhancement as never done it before in the CRM system. Is there anyone who can help in in creating BADI for datasource enhancement in CRM.
Thanks in advance
Moumita

Hi Kushal,
You can find the BADI name by,
Go to Transaction SE24
Enter the Object Type CL_EXITHANDLER and click on Display.
Double Click on method "GET_INSTANCE".
Put a Break-point on Call method cl_exithandler=>get_class_name_by_interface
Run RSA3 transaction and execute the DataSource.
The execution will stop at the break point.
Check the values of variable 'exit_name', it will give you the BADI name called at that time.
Thanks,
Kokila

I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTP

It may be best to recreate the folder and the smart playlists from scratch.
tt2

IDoc Issues when creating a Sales Order in CRM System

Hi All,
We have a BSP application in place which allows the customers to create orders online. This BSP application is linked to R/3. The R/3 BSP application remotely calls a custom code in the CRM system which creates an IDOC for the CRM Order and the IDOC is processed and a CRM Order gets created. In the BSP page we have given a provision to the client to enter a Requested Delivery Date which is mapped to the delivery date in CRM system.
Now comes the problem. When the customer creates an order, he enters the requested delivery date but the order which is getting created is not being populated with the date entered in the screen but with the current date.
But when I try and reprocess the IDOC through WE19 without changing any IDOC data records the order gets created with the date which was entered in the webpage.
Any pointers regarding what is happening?
Regards,
Karthik

Hi Karthik,
Just check on the field date, this request delivery date in CRM.
Does it come from date profile? If it does, then try to remove the
date rule or any default value for this date.
Alternatively, I am afraid you have to separately save the date
after first IDOC document creation is done. Seems that the default
value taken place (and replaced) after the document has created.
Hope this helps.
Gun.

Create Transaction (of CRM system) as Receiver thru "RSBBS" TCode for query

Similar Messages

Maybe you are looking for