Create transfer order without stock
Hi,
I have a requirement were I need to create transfer orders without stock, can we create this using the user exits (MWMTO005, MWMTO001, MWMTO002). is there anyother way of creating TO without stock by turning off ATP?
we need this for cross docking, we need a outbound TO so the inbound can be cross docked.
As I understood ur requirement u need vertual stock to make the delivery (GI) before reciving the good (GR).
Step 1. create one Stoarge Bin in 999 storage type, called as verstoack(vertual stock) As this storage are used for stock adjustment.
Step 2 Create TO from storage type 999-verstock to the in you want.
By this step -ve stock will develop in 999.
Step 3 when u do the GR, transfer this stock to 999-verstock from the recieved stoarge bins.
This is to nulify vertual; stock after receive.
This can be done on weekly basis.
Note: PGI for delivery will be done after GR only.
Please let me know if this issue is not resolved
Similar Messages
-
Create Transfer Order from TR - Consignment stock
Hi,
I've implemented vendor consignment stock in SAP. However I cannot get it fixed that when an TO is created from an TR that a TO is created for the material which is a part of the consignment stock.
Is it possible to make a TO automatic (with LT04) that also creates a TO with consignment stock as a source bin?
ThanksHi,
Below is a screenshot of the Transfer requirement:
Item 1 (1100-0002-0000) is a non-consignment material and item 2 (5800-0001-0001) is a consignment material which is stored on a consignment location.
With Tcode LT04 (Create Transfer Order from TR) it is possible to create a TO for a TR.
After clicking enter, the following screen appears
When I click Generate TO Item the system automatically creates a TO for material 1100-0002-0000. However the system cannot create an TO for material 5800-0001-0001. It gives the following screen. With the notice that the system cannot find the source storage bin.
The goal is that the TO is automatic created (just as for item 1) for this material. Thus the material can also be picked directly.
Hope this clarifies the issue.
Thanks. -
Creating Transfer Order for a Material document
Hi,
I am transferring the Unrestricted stock from one material to another material through Movement type 309.
I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
Regards,
Kishore.Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri -
Create Transfer Order for Consingment Pick up
Hey, is there anyone know how to create transfer order for consignment pick up.
I had tried it using LT06 by using GR material document but it didnt work.
Please i need the answer rather sooner than later.
ThanksHello,
Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
Your stock should be maintained in customer consignment and not in interim storage type.
Ideally your process shall flow like this
Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
BR,
Tushar -
Program/task which created Transfer order immediately
Hello All,
I want to create transfer order immediately after quality usage decision (QA32/QA11), movement type-321. I have done the required settings in WM-IM interface to create transfer order immediately and it is working perfectly fine.
Now my requirement is, I want to specify source bin by my own logic in transfer order. So can anyone guide me, how I can find which background program or job or FM or tcode gets called for immediate transfer order creation.
BR
KamalHi Kamal
you can ask your developer to use below mentioned user exit
MWMTO001 Update own data after TO creation
Since you are doing Quality decision which means transferring the stock from Quality to unrestricted i hope the FM being called will be
L_TO_CREATE_POSTING_CHANGE to create the transfer order -
Dear Sap Expert
I would like to create DBM Order without do GR for Non Stock Item. Currently charge is Cost Centre. But now we want to charge directly to profit centre only. May i know what is the correct process should be taken up. And what material need to setup in MM side.
Thanks
rgds
zaliHi,
You can use most material types, there is no one type that is more correct than the other in this scenario (although if you have a lot of these materials and they are all "non stock" then use something like MLAG this is designed to be used for non-stock items).
As long as you set the "GR" flag on the PO and use the correct account assignment category (it depends on which one matches your requirements).
If you want the costs top be posted at invoice receipt stage instead of GR stage then set the "GR" AND "GR non-valuated" flags.
Steve B -
Creating Job Order without Assembly Routing
How can you prevent Users from Creating Job Order without creating routing to the Assembly used
RegardsHi Laxmikant
Please note the steps
Create a BOM Application in OS30
Create a new BOM ID in OS31 with BOM Usage as Production
Assign this BOM ID in BOM Application
Ensure that ID is responsible for Production planning alone.
Then in that ID maintain a BOM alone without any items.
Assign this BOM Application in Order type dependent parameters in OPL8
Now u can create a production order w/o BOM
Rgds -
Error while creating Production order without BOM
Hi Guys,
While creating production order without a BOM i am getting the following error in the error log.
Error: BOM for material xxxxxx does not contain any valid items
Message no. CO636
Kindly help.
Regards,
SidDear customer,
could you check in the master data screen of the order if one BOM has been selected?
please coudl you check your customizing the following transactions:
OPJM
OPJI
what do you have in 'BOM slection field' MRP4 view of the header material?
Please check if with this info you can find the missing data to explode the BOM
regards
Maria -
Error While creating Transfer Order
Hi all......
Im trying to create Transfer Order with ref. to Transfer requirement in LT04, and getting the following error.
"This screen is only allowed for manual transfer orders".
Can any one tel which transaction I hve to use ? And I need User manuals for WM transactions.
Thanks n Regards
DurgaHello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman -
BAPI - Goods receipt and then create transfer order for a production order
Hello Everyone
We need to do goods receipt and then create transfer order for a production order (Material for WM scenario)
We are using BAPI 'BAPI_GOODSMVT_CREATE'
i_items-orderid = wa_afpo-aufnr .
i_items-order_itno = wa_afpo-posnr.
i_items-mvt_ind = 'F'.
i_items-stge_loc = wa_afpo-lgort.
i_items-stge_type = '901'. "wf_styp.
i_items-stge_bin = wf_sbin.
i_items-entry_qnt = wf_qty.
i_items-entry_uom = wa_afpo-meins.
i_items-entry_uom_iso = wa_afpo-meins.
i_items-batch = wa_zmobtag-charg.
i_items-move_type = '101'.
i_items-move_reas = wl_3131.
We are passing i_items (like line of goodsmvt_item) along with other parameters to BAPI and its creating material document and Transfer order automatically. Problem is the TO created is showing destination storage bin as default storage bin( from material master).
The field goodsmvt_item-stge_bin is just changing the Source bin details. There is no field for bin in the BAPI so that we can change the Destination storage bin as per our requirement.
My requirement : Creating material doc and then TO. Material should move to specified storage bin.
Please let me know any alternate way( No BDC) so that my requirement is achieved.
Regards
SwetabhHi ,
can u check these fields ,
STGE_TYPE_PC UBTYP CHAR 3 0 Storage type for transfer posting
STGE_BIN_PC UBPLA CHAR 10 0 Storage bin for transfer posting
Regards
Prabhu -
FM/BAPI to create Transfer Order(TO) with reference to TR or Material Doc.
Hi,
I am in need of Function module or BAPI to Create Transfer Order(TO) with reference to Transfer Requirement(TR) or Material Document.Hi,
Please try any of the below,
1.Look at function group L03B (Transfer order processing)
2.Use L_TO_CREATE_TR
3.BAPI_GOODSMVT_CREATE set:
GOODSMVT_ITEM-STGE_TYPE_PC = destination storage type or GOODSMVT_ITEM-STGE_TYPE_ST = destination storage type
4.Look at fm L_TB_VERAENDERN. This isn't RFC, but you might copy fm into ZL_TB_VERAENDERN and set RFC on.
Hope this helps.
Thanks,
Harini -
Not able to create transfer order..
Hi all,
When i am trying to create Transfer order,it gives an error"No items that are to be picked were found".
I have maintained all the settings regarding item categories and delivery item categories.
i am using Lean ware house management,What I feel is that there is some error in ware house settings.Please suggest..
Roopakhi,
i think you have 2 or more line item in sales order, the delivery date for one or two item will be in the past,so when you create delivery the item which is in the past delivey date will not get copied to delivery.
check all item is there in the delivery document,if no check the mising item delivery date, create the delivery based on that delivery data.
update the thread
regards
senya -
How to create Transfer order from material document uFF08Move type is 101uFF09
Hi all,
is there any function module, BAPI to create transfer order from a material document number?
I want to use FM L_TO_CREATE_SINGLE,but the result is "Movement type 101 for manual transfer orders does not exist".
Is the parameters error?
Thank you in advance
RegardsThe error message you get is number 196 from message class L3, do a where-used on it from transaction SE91 and then put a break-point on each line result. Afterwards, re-execute your function call and see which break-point is hit and investigate from there.
With that said, you really should be using Bapi BAPI_GOODSMVT_CREATE for all goods movement operations. It shares code with MIGO and executes the same Badi's and user-exits, so data integrity is not broken. Don't forget Bapi BAPI_TRANSACTION_COMMIT to commit changes in the database after a successful call.
cheers -
How to create Transfer order from material document
Hi gurus,
is there any function module, BAPI to create transfer order from a material document number.
waiting for positive reply.
thanks
vinodHi,
The FM L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE could solve your problem.
Hope it helps.
Chang -
Anyone used BAPI/FM for LT03 create transfer order
Hi all,
Has anyone used BAPI/FM for <b>LT03</b> create transfer order based on delivery.
the BAPI/FM should accept <b>multiple line items for individual storage units</b>.
thanks,
Subbathanks Amit....
But it would be helpful to know the usage of this FM....and if anyone has used in their program....
thanks,
Subba
Maybe you are looking for
-
My address book app is missing
I put my iphone in my pocket and I must have hit something because my app in the dock is gone. All of my contacts are still in the phone when I search for them, but the physical app is gone. Any suggestions on how to restore it to the dock?
-
Unwanted text from Master only shows in Preview mode
Hi, When I preview myMaster document, I see a line of text that doesn't show during Design mode. Any suggestions how to locate and delete it? Thanks, Ron
-
PR should be in Display once Released
Dear All, Once the PR is Finally Released then it should be in dispaly mode.No one should be able to make any changes.In Release Indicator B for Blocked 2 for RFQ/purchase order in B I have set Changeiblity Value 1 ,then the PR is coming in Display
-
Is there anyway I can put my DVD movies onto my iPod? Since the Australian music store does not sell movies, I would at least like some on there, since that is pretty much what I bought the iPod for. If this procedure is possible...please help
-
Hierarchial alv in a sequential manner for 6 levels
Can we have hierarchial ALV with multiple levels. I.e Header will have Item details -Item_01, on further clicking the item; it should further show item details , i.e Item_02. It is something like folder inside a folder till 6 levels. is it possible,