Create transfer order
Hi,
I know LT01 is for creating transfer for single material.Is there any tcode for creating transfer order for mutiple materials,please?
-Jaheer
If you want move entire quants to a different bin, then you can use LT10
Similar Messages
-
Creating Transfer Order for a Material document
Hi,
I am transferring the Unrestricted stock from one material to another material through Movement type 309.
I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
Regards,
Kishore.Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri -
Error While creating Transfer Order
Hi all......
Im trying to create Transfer Order with ref. to Transfer requirement in LT04, and getting the following error.
"This screen is only allowed for manual transfer orders".
Can any one tel which transaction I hve to use ? And I need User manuals for WM transactions.
Thanks n Regards
DurgaHello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman -
BAPI - Goods receipt and then create transfer order for a production order
Hello Everyone
We need to do goods receipt and then create transfer order for a production order (Material for WM scenario)
We are using BAPI 'BAPI_GOODSMVT_CREATE'
i_items-orderid = wa_afpo-aufnr .
i_items-order_itno = wa_afpo-posnr.
i_items-mvt_ind = 'F'.
i_items-stge_loc = wa_afpo-lgort.
i_items-stge_type = '901'. "wf_styp.
i_items-stge_bin = wf_sbin.
i_items-entry_qnt = wf_qty.
i_items-entry_uom = wa_afpo-meins.
i_items-entry_uom_iso = wa_afpo-meins.
i_items-batch = wa_zmobtag-charg.
i_items-move_type = '101'.
i_items-move_reas = wl_3131.
We are passing i_items (like line of goodsmvt_item) along with other parameters to BAPI and its creating material document and Transfer order automatically. Problem is the TO created is showing destination storage bin as default storage bin( from material master).
The field goodsmvt_item-stge_bin is just changing the Source bin details. There is no field for bin in the BAPI so that we can change the Destination storage bin as per our requirement.
My requirement : Creating material doc and then TO. Material should move to specified storage bin.
Please let me know any alternate way( No BDC) so that my requirement is achieved.
Regards
SwetabhHi ,
can u check these fields ,
STGE_TYPE_PC UBTYP CHAR 3 0 Storage type for transfer posting
STGE_BIN_PC UBPLA CHAR 10 0 Storage bin for transfer posting
Regards
Prabhu -
FM/BAPI to create Transfer Order(TO) with reference to TR or Material Doc.
Hi,
I am in need of Function module or BAPI to Create Transfer Order(TO) with reference to Transfer Requirement(TR) or Material Document.Hi,
Please try any of the below,
1.Look at function group L03B (Transfer order processing)
2.Use L_TO_CREATE_TR
3.BAPI_GOODSMVT_CREATE set:
GOODSMVT_ITEM-STGE_TYPE_PC = destination storage type or GOODSMVT_ITEM-STGE_TYPE_ST = destination storage type
4.Look at fm L_TB_VERAENDERN. This isn't RFC, but you might copy fm into ZL_TB_VERAENDERN and set RFC on.
Hope this helps.
Thanks,
Harini -
Create Transfer Order for Consingment Pick up
Hey, is there anyone know how to create transfer order for consignment pick up.
I had tried it using LT06 by using GR material document but it didnt work.
Please i need the answer rather sooner than later.
ThanksHello,
Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
Your stock should be maintained in customer consignment and not in interim storage type.
Ideally your process shall flow like this
Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
BR,
Tushar -
Not able to create transfer order..
Hi all,
When i am trying to create Transfer order,it gives an error"No items that are to be picked were found".
I have maintained all the settings regarding item categories and delivery item categories.
i am using Lean ware house management,What I feel is that there is some error in ware house settings.Please suggest..
Roopakhi,
i think you have 2 or more line item in sales order, the delivery date for one or two item will be in the past,so when you create delivery the item which is in the past delivey date will not get copied to delivery.
check all item is there in the delivery document,if no check the mising item delivery date, create the delivery based on that delivery data.
update the thread
regards
senya -
How to create Transfer order from material document uFF08Move type is 101uFF09
Hi all,
is there any function module, BAPI to create transfer order from a material document number?
I want to use FM L_TO_CREATE_SINGLE,but the result is "Movement type 101 for manual transfer orders does not exist".
Is the parameters error?
Thank you in advance
RegardsThe error message you get is number 196 from message class L3, do a where-used on it from transaction SE91 and then put a break-point on each line result. Afterwards, re-execute your function call and see which break-point is hit and investigate from there.
With that said, you really should be using Bapi BAPI_GOODSMVT_CREATE for all goods movement operations. It shares code with MIGO and executes the same Badi's and user-exits, so data integrity is not broken. Don't forget Bapi BAPI_TRANSACTION_COMMIT to commit changes in the database after a successful call.
cheers -
How to create Transfer order from material document
Hi gurus,
is there any function module, BAPI to create transfer order from a material document number.
waiting for positive reply.
thanks
vinodHi,
The FM L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE could solve your problem.
Hope it helps.
Chang -
Anyone used BAPI/FM for LT03 create transfer order
Hi all,
Has anyone used BAPI/FM for <b>LT03</b> create transfer order based on delivery.
the BAPI/FM should accept <b>multiple line items for individual storage units</b>.
thanks,
Subbathanks Amit....
But it would be helpful to know the usage of this FM....and if anyone has used in their program....
thanks,
Subba -
Create Transfer Order from TR - Consignment stock
Hi,
I've implemented vendor consignment stock in SAP. However I cannot get it fixed that when an TO is created from an TR that a TO is created for the material which is a part of the consignment stock.
Is it possible to make a TO automatic (with LT04) that also creates a TO with consignment stock as a source bin?
ThanksHi,
Below is a screenshot of the Transfer requirement:
Item 1 (1100-0002-0000) is a non-consignment material and item 2 (5800-0001-0001) is a consignment material which is stored on a consignment location.
With Tcode LT04 (Create Transfer Order from TR) it is possible to create a TO for a TR.
After clicking enter, the following screen appears
When I click Generate TO Item the system automatically creates a TO for material 1100-0002-0000. However the system cannot create an TO for material 5800-0001-0001. It gives the following screen. With the notice that the system cannot find the source storage bin.
The goal is that the TO is automatic created (just as for item 1) for this material. Thus the material can also be picked directly.
Hope this clarifies the issue.
Thanks. -
Create transfer order for material document - 4.6C system
Hi Gurus
Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
Thank you in advance
Regards
SarathSarath,
Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
Thanks again. -
How to pick additional delivery quantity after creating Transfer Order .
Hi
Sales order has been created for 30 pc of material , with reference to this sales order , delivery has been created .Afterwards I created transfer order in lt03 and got it confirmed in LT12. However , PGI has not been carried out .
Afterwards , I went to VL02N and manually increased the materialsu2019 quantity to 60 pc in delivery .
In delivery packing status is partially picked .
I request you to help me how can I pick another 30pc as already transfer order has been created and confirmed for this delivery .
Either system is not allowing me to cancel transfer order in order to create fresh transfer order to with reference to this delivery . Otherwise , I could have done it .
Could you please suggest me , how to go about it .Hi
There is an excellent way to handle your issue
While creating TO in t code LT03 in the initial screen control tab if you give pick quantity as 2 after the TO creation the system will simultaneouslely do PGI also in a single shot
This means the delivery quantity cant be changed in the VL02N
The whole VL02N will be display mode fully greyed out
That means after TO you cant change the delivery
If extra qty has to be added then it has to be a separate order only
I have practised this only and for the past two hrs i was breaking my head how come you are changing delivery after TO creation and for me it was in display mode(fully greyed out) even in VL02N and i found out i am using adopt pick qty as 2 in the initial screen of LT03 which does PGI in a single shot
This should be a good solution for you
Even the solution suggested by Mr.Raj Malhotra you will face the same problem
Regards
Raja -
Creating Transfer Order using LT03
Hi All,
Can anybody send me steps to create Transfer Order using LT03. I'm a technical guy and dont know how to create this.
Should I have outbound delivery to create TO using LT03?
Thanks n Advance.I'm new on SAP. What is BAPI?
Thanks for your answer.
Regards,
Aurélie -
Create Transfer Order inbound using an Idoc
Hi all,
I need some help on solving the error message- In our senario we want to send an Idoc (Create Transfer order ) from external system to SAP. Hence i have done mapping for the idoc but everytime i process the idoc- it comes with an error the storage location missing or incorrect.
Settings i have done is
used WMTORD message typ idoc
E1LTORH- B requirement type
4xxxxxx- PO number
101 - mvt type
Gxx - warehouse number
TAPOS 1 Transfer order item
MATNR 002xxxx Material Number
WERKS Gxx2 Plant
LETYP E1 Storage Unit Type
VLTYP 902 Source Storage Type
VLBER 001 Source storage section
VLPLA 4544000514 Source Storage Bin
VSOLM 300 Source target quantity in stockkeeping unit
NLTYP 001 Destination Storage Type
NLBER 001 Destination storage section
NLPLA 01 Destination Storage Bin
NSOLM 300 Destination target quantity in stockkeeping unit
VLENR 00000000001000000445 Source storage unit number
LGORT 2001 Storage Location
VBELN 425001423 Delivery
any help is welcomed. thanks
Jasmeetthanks for the reply,
But omzk is no transaction, however when I try to do create a transfer order using transaction LT03 it works fine and also the document gets osted with movement type 101. so i need to replicate this in an idoc which i am not able to do as i keep getting error message missing storage location or incorrect -
When we create Transfer order it should print by printer automatically
Dear Sir,
I wanted to print Transfer order automatically when we create Transfer order it should print by printer.
No need to go LT31 & generate Spool & then print.
Please provide config setting ASAP.
Regards
Manoj ChaudharyHi Manoj,
Goto SPRO-IMG-LE-WM-activities-define print control .
There you will find all settings for defining spool code(tick immediate printing), printer,print code and the repective assignments and control parameters.
-rahul
Maybe you are looking for
-
Xperia Z1 Android 4.3 14.2.A.0.290 firmware ROLLING NOW
Xperia Z1 Android 4.3 14.2.A.0.290 firmware Update Rolling Officially. Update available and confirmed in India, UK, Sweden, Finland, Singpore. Confirmed on Both C6902 and C6903 Source - http://www.xperiaguide.com/2013/12/16/xperia-z1-z-ultra-android
-
Error while running migrateInstance5
Hi all, I am getting the following error while running the migrateInstance5 when I am trying to migrate from 4.16 to 5.1:- AtributeName: mvs, Value: ( mvs-oid NAME ( 'mvs' ) DESC 'User Defined Attribute' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 X-ORIGIN
-
Hi All, I made a delta link of an standard SAP PCD object(X) into my local workspace (Y) and then edited only one property of that delta linked object (Y). so now i could see a sybmol "#" beside that delta linked object(Y). which means that there
-
Hi guys I am writning technical specification where I have to specify the order of keys in a new DSO. 1.On what basis do I choose order of keys in DSO?how will this order help me? 2.While creating DSO in BW,where do we have setting to choose this ord
-
i just installed a replacement printer. printed out a test alignment page, perfect. cannot get it to print a document from word or open office Help!