Create transformation from structure

HI,
There is option to create simple transformation structure on transction STRANS
and move the structure to internal table ?
any simple example will help i need to do poc for that ,
Thanks in advance
Alex
Edited by: Alex Dean on Mar 25, 2010 1:07 PM

HI
I am familiar with the option to transfer abap table to XML via TR.STRANS
and call transformation but i am not familiar how to do the opposite i.e. create structure
in TR. STRANS and transfer it to internal table .
Regards
Alex

Similar Messages

Error while creating transformation from DSO to InfoCube

Hi Gurus,
When i am creating tranformation from DSO to InfoCube getting an error, " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value
'8.50 ' "
ZAMT_PLC is created with 0CURRENCY.
On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
I want to know why is this we need to have value for 0Currency field???
Thanks & Regards,
Anup

Hello Anup,
If you load a key figure which has a unit assigned to it,
then for every records where the key figure has a valid value
(value 0) the corresponding unit has to be delivered as well.
Additionally please check note 1366474 regarding the RSTRAN 312
error message:
"The corrections contained in Note 1165168 are incomplete.
Depending on the sequence during loading, the system may not issue error
message RSTRAN 312 even though data regarding the assigned unit or
currency "space" is incorrect."
This means actually, that the system should have issued the RSTRAN312
error message even before the upgrade, but for some reason this
check found no issues in some constellations. This means furthermore
that your system behaved incorrectly in the past, that this
error message was not triggered if you loaded key figures without
any unit.
I'm sorry to tell you, but the system behaves and works as designed
as it should be even before the correction from note 1366474.
Please change your transformations for key figures which
have a unit assigned, that the unit field is filled correctly.
with the corresponding units, otherwise the system will abort
the processing of the data with the above mentioned error
message.
Best Regards,
Des

Create querry from Structure

Hello gurus,
Is it possible to create a query from SAP structures using TX:sqvi?
if it is possible, pls help out
Regards,
Tolulope

I THINK YOU want only fileds which are used in structure for your report
create one work area of structure type
types : begin of w_test.
include structure BSEG_ALV.
types : end of w_test .
data : it_test type standard table of w_test with header line .
now your internal table of type structure is ready
select data according to your specification
step by step
and push data into internal table .
this will help you .
If purpose is different please explain .
Regards
Deepak .

Adobe 6.0 Pro--PDFs created from multiple PDFs don't have bookmarks from structure?

I'm working with my company's 6.0 Pro (old, I know, but what we've got is what we've got,) on a Windows 7 machine. I've read online that in 6.0, PDFs created from multiple PDFs, by defaut, should have bookmarks from structure that use the original filenames as the bookmark names. I was surprised to read this, because ironically enough this is precisely what I began looking online to see if I could do, and all I could seem to find then were ways to get rid of that function. I don't believe that our installation has been modified in any way, but the binders I'm creating don't automatically have bookmarks from their structure, nor do the bookmarks I'm creating from the structure by menu command have the original file names as their names. Such an automatic bookmark structure w/ that naming scheme would in fact be very helpful in our workflow, as we deal with large volumes of files where outside data paired with file names needs to be one-to-one matched against the actual pdf contents, and opening files individually is time consuming. As of now, when I go to create bookmarks from structure in my document made of multiple pdfs, I have two choices: "Document", which only creates a bookmark to the first page of the whole thing, and "Part," which creates bookmarks to the first pages of all the documents that were combined, with each bookmark named "Part."
We would be satisfied with nameless bookmarks except that the combine feaure is also unreliable. It usually switches the first and last files of the alphabetical order, but not always, meaning that we can't rely on bookmark order to know which file we are looking at once the binder is created.
What I'm hoping to discover is if this behavior for 6.0 Pro is really abnormal and if so, what fixes or workarounds might be available. Thanks.

Just to clarify --
"... should have bookmarks from structure ..."
Not true.
If a PDF is tagged then Acrobat Pro can create new Bookmarks from the PDF's structure (from the Bookmark panel's Options menu).
Currently there is no other mechanism for this.
This may change after PDF-2 (ISO 32000-2) is released but that is still out on the timeline.
Just some things to consider.
When combining multiple PDFs into a new, single PDF click on the Options button and tick "Always add bookmarks..."
This should give you the filename. If a PDF has an entry in its "Title" this will be a bookmark nested under the top (filename) bookmark.
Also, when combining PDFs if there is no entry in "Tiltle" expect to see the filename as a bookmark.
It there is an entry for "Title" expect to see the "Title" entry as the bookmark.
What you describe for the elements/tags "Document" and "Part" are consistent with what they are and how they are permitted to be used in a tagged PDF.
(See ISO 32000-1, Section 14.8)
Be well...

Error while creating transformation in BI

Hi Experts,
Could you please help me in sloving the below two points in BI.
1. While creating transformation from Data source to infosource in BI, it was throwing error 'Active version of emulated 3.x DataSource XXXXXXX cannot be displayed'. The source system here is another BW 3.5 system. Please help how to create transformation for this.
2. While adding no-cumulative key figure to infosource it gave error ' non-cumulative key figures can't be added to infosource'. Is there any way to add these type key figures to infosource.
Could you please give solution for the above.
Thanks
Konda Reddy

Hi,
Check the DataSource is in which version, i mean is it in 3.x or 7. Because we can create the transformations if and only if the DataSource is in 7 version. If it is in 3.x, it will allow u to create Transfer rules. So first migrate the DataSource form 3.x to 7 suing tcode RSDS.
Non-cumulative keyfigures are loaded directly from datasource to data target. System not allows u to maintain at InfoSource level ( I am not sure about this, confirm once).
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy

Bookmarks from structure - limit on length of text?

I am trying to create bookmarks from structure when converting a WORD 2007 document to pdf. The WORD doc contains headings in Heading 1 format. The first part of this heading appears OK in the bookmark but it is truncated i.e. only the first few dozen characters of the heading appear in the bookmark. Is there any way of increasing the number of characters that appear in the bookmark?
I am using WORD 2007 Adobe 9 Pro extended on Windows XP

What wizard created items with even-longer names than were already on your page? FYI, items with names longer than 30 characters cannot be used as bind variables but should work otherwise. It's possible that we're binding using those names using one of these new-fangled constructs (like form pagination) and that the exception is being masked. In any case the Builder could be more helpful in this regard.
Scott

Creating Transformations -- Automatic Rules not Generating

Hi All,
I am Trying to create Transformations from Data source to DSO,
Automatic Rules not Generating, I have more that 120 Objects in DSO but it is generating only 2 roles , I am manually creating remaining rules
For automatic rules generation what I have to do ???
Regards,
Shaik

Hi Anil,
Thanks for quick Response ,
I am trying this , I am installing Transfer rules from BC, once Transfer rules Activate, I think it will work,
I need to know from u is this right way to do this????
Regards
Shaik

Create Value node instance from structure at runtime

Hi,
I have a requirement where an internal table is given with some details.
Now I need to add each row of this internal table as one entity into a collection.
For this I need to create value node instance for each entry of the table and then
lr_collection->if_bol_bo_col~add( lr_entity ).
this to add to the collection.
Please tell me how to convert this one row of this table into entity.
Regards,
pooja

Try it like this:
DATA: lt_data type table of ty_line.
DATA: ls_data type ty_line.
For the value nodes we need an data object
DATA: lr_line_ref type ref to ty_line.
The value node which should be added
DATA: lr_value_node type ref to cl_bsp_wd_value_node.
First create the reference structure
CREATE DATA lr_line_ref.
*Loop over you itab
LOOP AT lt_data into ls_data.
Create the value node based on the ref line
CREATE OBJECT lr_value_node
EXPORTING iv_data_ref = lr_line_ref.
Now set the data from the internal table
lr_value_node->set_properties( ls_data ).
Now add the created value node to the collection
lr_collection->if_bol_bo_col~add( lr_value_node ).
ENDLOOP.

How to Create Hierarchy From Flat file Structure

Hi Gurus,
There is a scenario for me regarding the Hierarchy.
Required Hierarchy structure - Region>Director>Manager-->Sales id
I have flat file which gives the info like user id , sales id , manager id, director id.
But the transaction data Flat file has structure with sales id, region id, sales amt, sales qty.
Note : Region id is another Master Data.
How i can create hierarchy from the first flat file which doesnot have region info in that but it is available in the transaction data Flat file.
Is there anyway we can create hierarchy based on the first Flat file structure which contains more that 1,00,000 records.
Try to Suggest me in this regard .
This is urgent.
Regards,
Mano

Hi Mano,
                Defining the source system from which to load data
Choose the source system tree File ® Create.
       2.      Defining the InfoSource for which you want to load data
Optional: choose InfoSource Tree ® Root (InfoSources) ® Create Application Components.
Choose InfoSource Tree ® Your Application Component ® Other Functions ® Create InfoSource 3.x ® Direct Update.
Choose an InfoObject from the proposal list, and specify a name and a description.
       3.      Assigning the source system to the InfoSource
Choose InfoSource Tree ® Your Application Component ® Your InfoSource ® Assign Source System. The transfer structure maintenance screen appears.
The system automatically generates DataSources for the three different data types to which you can load data.
○       Attributes
○       Texts
○       Hierarchies (if the InfoObject has access to hierarchies)
The system automatically generates the transfer structure, the transfer rules, and the communication structure (for attributes and texts).
       4.      Maintaining the transfer structure / transfer rules
Select the DataSource for uploading hierarchies.
IDoc transfer method: The system automatically generates a proposal for the DataSource and the transfer structure. This consists of an entry for the InfoObject for which hierarchies are loaded. With this transfer method, the structure is converted to the structure of the PSA during loading, which affects performance.
PSA transfer method: The transfer methods and the communication structure are also generated here.
       5.      Maintaining the hierarchy
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy
Hope this helps
Regards
Karthik
Assign points if Helpful

Creat ECM budget structure from current org structure

Hi all ,
When we are creating budget heirarchy using "PECM_GENERATE_BUDGET", we want to create it from org structure that is effective on a particular date and not for all org assignments.
For example :
For budget effective 01/01/2011 to 12/31/2011. We may want to create Budget structure from org structure that effective 12/31/2011.
( The standard transactcion "PECM_GENERATE_BUDGET" creats structures for all the effective dates )
Let's say, I have Org units Org1 and Org2 at the same level. Org3 reports to Org1 from 01/01/2011 to 11/20/2011. But effective 12/01/2011, Org 3 reports to Org 2.
01/01/2011 to 11/30/2011 -> Org3 reports to Org1
12/01/2011 to 12/31/9999 -> Org3 reports to Org2
When I run ""PECM_GENERATE_BUDGET"" this generates a budget heirarchy, that shows Org3 reporting to both O1 and O2,
whereas we want Org3 to be just shown in the hierarchy of Org2 ( effective 12/31/2011).
I see that the FM "'HR_ECM_GET_OBJECT_STRUCTURE" and "HR_ECM_BUILD_BUDGET_STRUC" generate budget structure, by taking the begin and end date of budget period( 01/01/2011 to 12/31/ 2011) into account to create the org structure. But we just want the latest structure effective on a particular date.
Has any faced this kind of scenario/requirement as this seems to be the standard budget creation functionality.
Appreciate any inputs
regards

Hi - When you are creating budget sturcture based on org. unit the system will create budget structure on the basis of defined budget period
Pls. try delimiting 01/01/2011 to 11/30/2011 -> Org3 reports to Org1 relationship and create budget structure. I feel you should be fine then.
which EHP are you in? If you are using EHP 5 its give option to generate top down or bottom up budget structure.
Can you also reply to one of my post.

Error in create-nodeset-from-delimited-string

Hi Gurus,
I am trying to use the orcl:create-nodeset-from-delimited-string XPath extension function in the XSL mapper.
I am using the Map test feature to test my map, and notice that if I use this function, the XSL does not give any output - i guess the map is failing to execute at runtime. When I open the JDeveloper as jdev.exe [so that I can see the command line window for JDev], I can see that an error appears in the command line window that states "Method orcl:create-nodeset-from-delimited-string" not found.
This XPath function is available for use in the "Advanced Functions" palette in the XSL Mapper.
Please let me know if
a) This function can be used within the Mapper, and if so,
b) whats the right way to use it.
My usage looks like
orcl:create-nodeset-from-delimited-string('tns:sampeNode',$delimVar,',')
where delimVar is a comma delimited string.
Please let me know your thoughts on this .
rgds,
Ram

Hello..
Look, I paste a functional piece of code that I develop in a transformation.
Take this for your example and develop with the same structure.
BR...Rodrigo
<xsl:param name="HomeNumber"
select="/tns:GetCustomerResponse/tns:GetCustomerResult/tns:DefaultAddress/tns:HomePhone"/>
<xsl:param name="HomeNumberExt"
select="/tns:GetCustomerResponse/tns:GetCustomerResult/tns:DefaultAddress/tns:HomePhoneExt"/>
<xsl:param name="WorkNumber"
select="/tns:GetCustomerResponse/tns:GetCustomerResult/tns:DefaultAddress/tns:WorkPhone"/>
<xsl:param name="WorkNumberExt"
select="/tns:GetCustomerResponse/tns:GetCustomerResult/tns:DefaultAddress/tns:WorkPhoneExt"/>
<xsl:param name="Fax1"
select="/tns:GetCustomerResponse/tns:GetCustomerResult/tns:DefaultAddress/tns:Fax1"/>
<xsl:param name="Fax2"
select="/tns:GetCustomerResponse/tns:GetCustomerResult/tns:DefaultAddress/tns:Fax2"/>
<xsl:param name="Email"
select="/tns:GetCustomerResponse/tns:GetCustomerResult/tns:DefaultAddress/tns:Email"/>
<xsl:param name="contactMedium"
select="concat($HomeNumber,'-%',$HomeNumberExt,'-%',$WorkNumber,'-%',$WorkNumberExt,'-%',$Fax1,'-%',$Fax2,'-%',$Email,'-')"/>
<xsl:param name="contactMediumNodeSet"
select="oraext:create-nodeset-from-delimited-string('contactMediumNodeSet',$contactMedium,'%')"/>

All fields are not visible while creating transformation

Hi experts,
I am trying to create transformaion between a LO datasource and DSO designed by me. In R3, in RSA6 I can see more than 45 fields but while creating transformation only 30 fields are available.
I tried by replicating the datasource multiple times but no change.
kindly suggest where I am doing wrong.
thanks and regards,
rajesh.

Hi Rajesh, Please follow the follwing steps:
Goto RSA6, select your data source and then click on change and save button.
this will take you to transfer structure. There check the fiels you want to see have hide check box or not. If yes then un hide them. Then save the transfer structure.
Execute the datasource in RSA3. You should be able to see the filds you have unhide in previous step.
replicate the data source in in BW
Goto transfomation in change mode and then to routine. Now you will be able to see the fileld in the routine.

Short Dump while creating transformation in BI

Dear fr,
I am extracting data from a system and passing this data to an infocube
But while creating transformation getting the follwing error
Cannot generate proposal
Message no. RSTRAN017
Please help will reward points for sure.

Hi,
Seems others already had this problem before: /thread/347000 [original link is broken]
regards,
Csaba

Short Dump while creating transformation in SAP Trial 7.01

Hi All,
I'm getting this dump when I try to create transformation(BI 7) in Trial Version 7.01 software which I downloaded from SDN. Below is the dump error.
"Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx auf are
installed on your computer. You can find notes on installing and
checking the BW Frontend by searching for SAP Notes with the
following key words:
Version, sapservX, Setup, Patch, Installation, Frontend, BW,
sapbexc.xla, checktool, wdtaocx, wdtaocx.ocx
If the front end is installed correctly but the error still occurs,
contact SAP."
I tried some notes but they didn't help. Few other threads said to install the latest patches. I have oss user id but market place allows downloads of latest patches only through Solution Manager. How do I install Sol Man in trial software. This is what Download Basket says:
"All corrective software packages, for SAP NetWeaver 7.0 and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here . "
Any other solution if anyone knows then please share. Points will be assigned.
Regards,
Sujit.

Hi,
The problem was with the sap gui version. I installed the trial version on my office computer and my office computer had the latest gui. The sap gui that comes with the trial version has this problem. Check if they have a new trial version now. Hope this helps you.
Regards,
Sujit.

Error while creating datasource from table MBEWH

Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.

Hi Zakir,
      This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and   create one datasource...
   so, you need to check that   related table also.. for that MBEWH table..
    ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay

Create transformation from structure

Similar Messages

Maybe you are looking for