Create TRM task with resource element assigned

hi all.
I want create a TRM tasks with the resource element yet assigned.
There are some customize action or Add-in to do this???
Thanks a lot
Ismael

Hi,
  Tasks automatically get created based on Transfer orders with the help of this BADI and program:
LTRM_RQST_GLOBL_SCAN. Look at example  implementation class inside BADI definition.
After implementing this BADI.
Call this Function Module to create tasks automatically:
LTRQ_REQST_SCHDL or you can set up this program RLTRQSCHEDULER in background
  For you to assign a task , use the following FM:
LTSK_TASK_ASSIGN
Hope this helps
Thanks
Vinod.
Edited by: Funko Technical on Jan 20, 2010 8:47 PM

Similar Messages

  • Activate the TRM (Task and Resource Management)

    Could you tell me where to activate the TRM (Task and Resource Management) in WM?

    Hi Stefanie,
    First, you create the TRM site in:
    SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
    You can assign your TRM site to you warehouse number here:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
    And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
    Then, you continue with the rest of TRM customizing work.
    Hope this will be helpful for you.

  • TRM (Task and resource management) extractor

    Hi people!!
    I would like to know, if is there some
    TRM extractor for sap bw, or what could be
    the procces to load TRM information in BW.
    Regards!

    Hi Stefanie,
    First, you create the TRM site in:
    SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
    You can assign your TRM site to you warehouse number here:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
    And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
    Then, you continue with the rest of TRM customizing work.
    Hope this will be helpful for you.

  • Create shopping cart with WBS element

    Hi,
    Creating SC with WBS element ( assignment no ) getting the error that "The account assignment objects are defined for different business areas" 
    Give me some input what could be the cause??
    Thanks
    Hareesha

    Hi Hareesha,
    As Sreedhar has rightly said the issue is definitely with the correctness of the data.
    Check the assignment of WBS to the proper business area which you are using to create the shopping cart.Check your org. structure and attributes and their assignments once again.
    Neverthless some OSS notes for your reference if in case you can not able to make P.Os or the SC's / P.Os are not getting transfered to back end R/3.
    <b>Note 727897 - WBS element conversion in extended classic scenario</b>
    <b>Note 1000184 - Account assignment error when document transfer to back end</b>
    Even after validating the data if the problem still persists please explain it clearly with the errors for further help.
    Rgds,
    Teja

  • Unable to create a task with DAQmx: error -89136

    Hello,
    I am trying to create a task with DAQmx_CreateTask using C API on a PCIe 6535 device (using driver DAQmx 9.5.5 under Windows7), but I get the following error code:  -89136 [DAQmxErrorRouteNotSupportedByHW_Routing], although this function works on another PC with XP.
    The driver 9.5.5 seems to be correctly installed (MAX autotests on device work fine)
    Thanks for help
    amse

    This is the french speaking part of the forum, maybe you'd get better luck to obtain a good answer in the general section.
    To answer your question directly, I'd say check the options/parameters you're using because the error message clearly states that the way you're setting the physical channels / routing is not supported.
    Never used the C API so I can't really help you more than this.
    Hope this helps
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • Creating a task with a PXI-2522

    I am trying to create a task with a PXI-2522 module, this is a relay output module and I need to create a digital output task.Simply trying to create a digital output task with MAX, the PXI-2522 doesn't show up in the supported physical channel list? I've tried creating the task dynamically in LabVIEW and that doesn't work either. I must be missing something really obvious?
    I am using LabVIEW 2013 f2 with DAQmx version 9.8.0f0

    The PXI-2522 is considered to be in our Switch family of devices, not digital I/O. You can still program it using DAQmx though. Check out the example code that ships with DAQmx and see which VIs to use. You can access these examples by going to Help » Find Examples » Hardware Input and Output » DAQmx » Switches. From here you can select which example is most fitting for your application. 
    Nathan M.
    Applications Engineer
    National Instruments

  • Can Anyone Tell Me How to Create Greeting Cards with Photoshop Elements 7 or 8?

    I need a 7x10 page setup so that when the card is folded to a 5x7 my photo is landscape on the outside of the card.  Currently I can only find a 8 1/2 x 11 paper size.
    Thanks,
    Lexington59

    In Photoshop Elements 8 Editor, go to the Create tab, and you will see Greeting card, with 5x7 page size.

  • Automatic PR'S to be created in system with MRP element

    Sir,
    Ply help me out how automatic PR'S will be created with the help of MRP element
    regards
    amey

    Hi,
    PLease check this link with screen shots for MRP run which will create PR:
    http://www.sap123.com/showthread.php?t=89
    Regards
    Ram

  • CREATING "MASTER" PROJECT WITH PREMIERE ELEMENTS (PRE)

    I am creating a new thread following up on earlier questions re Premiere Elements 8.0 (PRE).
    I have created (authored?) 14 projects with music using PRE and burned each on 1 DVD.  I did not save to a folder, but went to Share and Burn Disc.  They show well on TV from an ordinary DVD player.  Now I must combine these projects into 3 "master" projects on 3 DVDs and burn multiple copies to send to former members of my Boy Scout Troop.  See the chart below. I thought (silly me) that I could do that straightforwardly with PRE.  I am going to start following suggestions from Bill Hunt and Nealeh.  
    Titles of Existing “Premiere Elements 8.0” “Sub” Projects
    All Burned Individually to NTSC DVD Standard
    Each Project Now on Separate DVD
    No. of Slides
    Running Time
    Min:Sec
    Desired
    New Project for DVD Players
    Introduction & Dedication
    21
    5:30
    DVD NO. 1
    417 Slides
    69:46
    With Main Menu Marker for Each SubProject
    1974 Canoe Trip
    60
    9:12
    1975 Canoe Trip
    105
    16:41
    1976 Canoe Trip
    24
    5:12
    1977 Canoe Trip
    16
    3:00
    1978 Canoe Trip
    89
    14:02
    1979 Canoe Trip
    15
    2:15
    1982 Canoe Trip
    87
    13:54
    1973 Jamboree
    62
    10:42
    DVD NO. 2
    247 Slides
    34:32
    With Main Menu Marker for Each SubProject
    1981 Jamboree
    124
    15:11
    1985-2001 Jamboree
    61
    8:39
    Troop 184 Camping & Hiking
    190
    34:28
    DVD NO. 3
    443 Slides
    78:12
    With Main Menu Marker for Each SubProject
    Other Activities 1972--1985
    65
    10:19
    Troop 184 Family Camping  1974--2006
    188
    33:25
    Total Slides
    1,107
    182:30
    182:30

    Hey, those ain't "newbie" questions. The first one gets posted to the Forum Comments forum weekly. The second one, well I should have posted my normal detail, but got lazy - mea culpa, mea culpa.
    1.) This ARTICLE should step you through the processes with the e-mails. If you have any questions, let us know. There are several places, where e-mail notification can be turned ON and OFF. Some are global, and some are specific to threads.*
    2.) Ah, the ImgBurn site. The top 2/3 are all ads. Hey, it's great free software, so who can blame 'em? Scroll down to where the page has the various versions and what they addressed. There is a Download button there (well below those ads). That is what you want. Normally, I mention the scrolling way down page, but you caught me here.
    Good luck,
    Hunt
    * Going back a few months, while trying to help another user on the Forum Comments forum, I got hit with a global change in my e-mail settings. I got about 1,000/day, for every forum that I participate in - think 1,000 x PS, PrPRo, Encore, InDesign, Illustrator, Audition, PrE and all of their sub-fora! Fortunately, it only took about 3 days for Adobe to get that fixed.

  • Can I create a matrix with empty elements?

    I am trying to make a 3D plot of experimentally obtained data points. I understand how to set up the block diagram, but the problem is that I dont have a z data point for every combination of x and y. I need to make a matrix like this:
    5   6   7   8   9   10   11
    3        53     820       15
        45       35      57
    25     34      57         48
    5   6   7   8   9   10   11
    Where the blank spaces signify no data was taken, so the matrix needs to have some type of 'greyed' cell.
    If I try to do this now, the VI just inserts zeros in those places and I get an incorrect surface. If I put NaN in those spaces, VI plots the points, but does not connect them to make a surface. 
    Any suggestions?
    Thanks in advance!
    Luke

    Luke,
    I can see two options:
    1. Try to fill the voids by interpolation. Look into the interpolation vis.
    2. There are methods that can plot such a so called 'scarce matrix'. Such a method basically accepts the data as a series of 3D vectors and performs a 2D curve fit. Typically 2D splines or B-splines are used as test functions. However, I don't know if this is available in Labview. Such code is available e.g. in the NAG library.
    Cheers
    Edgar

  • Error while creating Subcon PO with Order (F) account assignment cat

    Hi,
    I am trying to implement Outsourced Manufacturing scenario with ECC 604 and SNC 7.0
    We would like to demonstrate "Real Time Consumption" once a phase has been completed for WO in SNC.
    For this, it is necessary create Subcon PO with A/c assignment category F. While trying to create PO, i get the following error:
    1. Acct assignment determination is not poss.in the account assgnmnt manager
    Message no. IAOM220
    Diagnosis
    Errors occurred during the determination of the account assignment in the account assignment manager. Thus it is not possible to determine the account assignment.
    2. Characteristics for Controlling object have errors
    Message no. IAOM034
    Diagnosis
    There are errors in the characteristics that are transferred when creating or changing a Controlling object.
    System Response
    Processing stopped.
    Procedure
    Look at the messages prior to this object in the error log. They give an indication as to which characteristics have errors.
    3. Hierarchy level 01 not defined in business scenario Outsourced Manufacturing
    Message no. IAOM027
    Diagnosis
    In business scenario 'Outsourced Manufacturing', hierarchy level 01 was accessed. There is no key characteristic defined for this hierarchy level.
    System Response
    Processing is terminated.
    Procedure
    Inform SAP or the provider of the business scenario, if the business scenario was not provided by SAP.
    If you are responsible for the business scenario yourself, check the definition of the business scenario.
    Settings specific to CO order that have been maintained:IAOM1 - Maintain Controlling Scenario
    IAOM2 - Maintain Controlling Integration
    KA02 - Default Cost assgnmnet
    Tick RT consumption in ME11 (Vendor Purchasing Info Record).
    Any idea???
    Regards,
    Sandeep

    well it seems to be an CO issue
    please check if the g/l is maintained as cost element
    also check the setting s of account assignment catergory F and let us on which modifier key is maintained there make sure in OBYC-GBB the g/l is maintained for the material valuation class and which should be cost lement

  • SNC : Error while creating Subcon PO with Order (F) account assignment cat

    Hi,
    I am trying to implement Outsourced Manufacturing scenario with ECC 604 and SNC 7.0
    We would like to demonstrate "Real Time Consumption" once a phase has been completed for WO in SNC.
    For this, it is necessary create Subcon PO with A/c assignment category F. While trying to create PO, i get the following error:
    1. Acct assignment determination is not poss.in the account assgnmnt manager
    Message no. IAOM220
    Diagnosis
    Errors occurred during the determination of the account assignment in the account assignment manager. Thus it is not possible to determine the account assignment.
    2. Characteristics for Controlling object have errors
    Message no. IAOM034
    Diagnosis
    There are errors in the characteristics that are transferred when creating or changing a Controlling object.
    System Response
    Processing stopped.
    Procedure
    Look at the messages prior to this object in the error log. They give an indication as to which characteristics have errors.
    3. Hierarchy level 01 not defined in business scenario Outsourced Manufacturing
    Message no. IAOM027
    Diagnosis
    In business scenario 'Outsourced Manufacturing', hierarchy level 01 was accessed. There is no key characteristic defined for this hierarchy level.
    System Response
    Processing is terminated.
    Procedure
    Inform SAP or the provider of the business scenario, if the business scenario was not provided by SAP.
    If you are responsible for the business scenario yourself, check the definition of the business scenario.
    Settings specific to CO order that have been maintained:
    IAOM1 - Maintain Controlling Scenario
    IAOM2 - Maintain Controlling Integration
    KA02 - Default Cost assgnmnet
    Tick RT consumption in ME11 (Vendor Purchasing Info Record).
    Any idea???
    Regards,
    Sandeep

    Dear,
    Did you also experience the following?
    We are at the following step in the scenario:
    Supplier confirms production progress =>Manufacturingworkorderproductionprogressnotification XML is generated => POST component consumption is executed in the R/3 system (ECC 6 EHP4).
    We see the following problems after posting the component consumption
    -     table EKBE_SC is not filled
    -     in transaction kkf3 => CO production order => no booking/posting of progress
    -     Component consumption is reflected in an outbound delivery with movement type 543, but it is missing the link with the purchase order+item (see screenshot below) => as a result any post issue booking is not possible.
    Thanks for your help.
    Kindr regards,
    Stefan Hemeryck

  • How to create a Business Partner with internal number assignment

    Hello,
    We are using a CRM 7.0 system. We want to create a new Business Partner using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03 to perform it. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
    Please put attention that we also don't want to enter any alternative external number because we don't want the end user to see after in the WebUI.
    Thanks in advance,
    Sergey Kozyrev

    Hello,
    Standard CRM PC UI application offers three options when you push 'New' button: 'Person', 'Organization' and 'Group' (combobox appears). In your case, 'Person' should be selected.
    p.s. If you don't see combobox mentioned above, it could be security issue.
    Kirill

  • How to create array with "n" elements...

    Hy, how can i create a array with "n" elements ?

    i know, but the thing is: the other methode (which
    one isn't developed fom me) needs an Object Array
    (Object []) to work correctly...then take a look into the method toArray() of the Collection interface.
    thats why i need this gay "object Array"....I think it would be wise to avoid that adjective in this context and meaning.

  • Task and Resource Management

    HI SAP GURUS
    I have created a Transfer Order with 4 line items for 4 different materials. And I have created 4 tasks with reference to the same  TO in TRM Monitor. System is generated same group reference number for all tasks. Now how to assign this group reference number to a warehouse resource (worker) to create a task bundle?
    Thanks inadvance,
    Siva
    Edited by: siva.T on Aug 4, 2010 11:11 PM

    Hi Siva,
    Can you Resolve my Problem,
    While i am going to TRM Monitor to Create Task, There i am not getting any Inbound Delivery or Transfer Order.
    Can you tell me the answer...
    Thanks,
    Mukesh

Maybe you are looking for