Create type outline that includes stroke?

Hello. How do I create an outline out of type (as in Type>Create Outline) that includes the stroke? Can't find it anywhere.

That's one possible solution. But you still have a two color print. If your publication is B/W (or one color only) and you want a more richer black - be assured that at the print shop they can control te amount of ink that's printed.
In case of a B/W (one color) publication you coul'd also use a Spot colour, Pantone Coated or Uncoated (depends on the paper used) - as such a color has much better pigmentation it looks better when printed on paper than standard CMYK colors. The result is a better looking printed publication and you will save some money as you have only one color to print.
Just select a Pantone swatch and you will have no problems with trapping.
The same goes for full colour print - also in that case you will have a 5 color print (the four CMYK plates + one Spot color) but your solid background printed with the Spot color will be much better looking than when printed only in black.
When using negativ small type on a solid background I usually use a Spot color (I prefere Pantone) and a sans-serif or a slightly bolder serif typeface. I avoid using typefaces like regular TimesNew Roman. You could try to find some type face that has a SemiBold or DemiBold font style.

Similar Messages

Outline path to create an outline that includes the rounded edge?

In illustrator CS6 I have a line with a rounded endpoints. When I try to OUtLINE PATH - it will clip off the rounded edge -- as if I'm asking AI to outline a path with a non-rounded edge. How can I get outline path to create an outline that includes the rounded edge? Many thanks!

Karen,
It sounds like something that may require something from this list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Need help with adding form fields to PDF created in InDesign that includes links

I created a collateral piece in InDesignCC that includes hyperlinks and bookmarks - I then used LiveCycle to add an image field and text field to the front cover so our sales folks can customize it before use - the sales people with Reader can't save it without the hyperlinks and bookmarks being lost. Anyone have an option on how to fix that?

No. Not at all. I feel like I have clicked EVERYTHING. Lol. But obviously I have missed something.

Can I create a PDF that includes photos using Adobe Reader?

Is it possible to create a PDF document that includes photographs using only Adobe Reader?
Or do you have to pay yet more for Acrobat?

Rachel, although Word is not specifically designed for the job you describe, it can be used for it. Once you have completed your document, you can export it to a PDF file directly from Word (File > Save as > PDF). I would suggest trying first with a single page containing text and photographs like those you'll be eventually using. If results are not as good as you would like, you can explore other methods, such as using a proper design program to produce your originals. And, whatever method you use, don't forget to keep the original files along with your PDFs, and backup copies of both.

Upgrade to Final Cut 10.0.7 destroyed my generators created in Motion that include drop zones. Anyone experienced the same problem ?

In Motion 5 I created generators that included a drop zone. The objective it to bring them into Final Cut and insert into the drop zone a clip of the same duration.
In FCX 10.0.6 I used to bring a clip to the time line and re size it to the exact duration of my generator. Then I bring the generator to the time line and selected the generator, click in the drop zone of the published parameters menu and select this clip I wanted to insert. The result was the generator using my clip and the clip playing during all the duration of the generator with the generator effect.
Now, with 10.0.7 I can’t make that work. When I click in the clip I would like to import into the drop zone, the result is that there’s just a frozen image of the clip (in the same place I clicked with the mouse)
Is this a known problem of 10.0.7. It used to work well in 10.0.6
Thanks for your help !

I can't see that the update would have any effect on custom generators as they are housed separately from FCP X.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Can I create a task that includes 2 C series modules?

I am trying to create a single task that includes 2 NI-9425 C series modules but when I wire the physical channel constant "Mod3/port0, Mod4/port0" into the DAQmx Create Virtual Channel.vi I receive error -200086 which states physical channel range syntax in the input string is invalid because multiple devices were listed in the string. It is my understanding from LabView help that multidevice tasks are allowed. Also according to this KB article http://digital.ni.com/public.nsf/allkb/CF85114C6025C84C862571C000722DDA multi-device tasks are supported for S Series devices, C Series, and DSA devices, and according to this KB article http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument I have formatted my physical channel constant correctly.
Can someone please explain why I am getting this error when all indications are that this should be a simple thing to do?
My C series modules are in slots 3 and 4 in a cDAQ-9188 chassis, I am currently running LabView 8.5.1, with Windows XP
Thank you,
Eric
Solved!
Go to Solution.

Hi Eric,
I'm afraid that you can't configure hardware timing with the NI 9425 in CompactDAQ. The NI 9425 data sheet explains: "The NI 9425 is a static digital module, so you can use it to perform software-timed or static operations only when installed in an NI CompactDAQ chassis."
For AI, AO, and counters, daisy chaining multiple calls to DAQmx Create Channel is equivalent to specifying a list of physical channels, but for DIO it's different. A single DIO virtual channel can contain multiple physical channels (lines). It would be completely reasonable to assume that specifying a list of lines with "one channel for all lines" would cause DAQmx to put all of the lines in a single virtual channel, but due to how it's implemented in the DAQmx framework, this is not possible when the lines are on multiple devices. It would also be reasonable to assume that if DAQmx couldn't put all of the lines in a single virtual channel, then it would create one virtual channel per device, but that's also not how it's implemented--it returns the error that you received.
Instead, here are two approaches to putting all 64 lines in one task. Either one should work.
Approach A: Create a single task, containing two virtual channels (MyChan0 and MyChan1). MyChan0 contains cDAQ1Mod3/port0/line0:31 and MyChan1 contains cDAQ1Mod4/port0/line0:31. The Digital 2D Bool NChan 1Samp read VI returns a 2x32 array of Booleans. To flatten this into a 1D 64-element array, you need to use Reshape Array or some other method.
The DAQmx Task >> Channels property is there to show that there are two virtual channels named MyChan0 and MyChan1. Also, I used a for-loop to show that you don't have to hardcode multiple calls to DAQmx Create Channel. The "one channel for all lines" constant is redundant because that is the default.
Approach B: Create a single task, containing 64 virtual channels (MyChan0 through MyChan63). This uses the "one channel for each line" constant, which is not the default. MyChan0 contains cDAQ1Mod3/port0/line0, MyChan1 contains cDAQ1Mod3/port0/line1, etc. The Digital 1D Bool NChan 1Samp read VI returns a 1D 64-element array of Booleans. If you used the Digital 2D Bool NChan 1Samp VI instead, you would get a 64x1 array because there are 64 virtual channels containing 1 line each.
Brad
Brad Keryan
NI R&D

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to create one movie that includes these short movies that I can then either burn to a DVD or show in iMovie's Theater. How can I do it?

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater. How can I do it? The movies are now shared to iTunes.

Another easy way to fix this.
What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
Otherwise, if it's too late, you can either do the above or this...
Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business.

Creating GUI component that includes other components

Hello, I need to create an UNIVERSAL FORM (panel) consisting of several textboxes and labels. These textboxes and labels will be defined in XML. I want it as a GUI JavaBean. It should be made from a panel with some layout and it should consist other components. Here are my questions:
1) What class to derive from? JPanel?
2) Well, when I override a GUI Swing component I must implement a paint method but this is a bit strange. I just want to set up the textboxes -- I do not need any special painting. A question appears -- is JavaBean technology good for this situation? Is there any better solution?

I mean why this doesn`t work:
public class Uniform extends JComponent implements
Serializable {
     private String xmlContent;
     private int type;
     private JPanel panel;
     public Uniform() {
          panel = new JPanel(new GridLayout(1,2));
          panel.add(new JTextField("A"));
          panel.add(new JTextField("B"));
     public void paint(Graphics g) {
          panel.paint(g);
}Is it a good solution? How would you solve the
problem?
Thanks for your ideas.If you mean by 'dont' work' that your text boxes and panel doesn't appear, then it's because you're missing this line in your constructor:
public Uniform() {
this.add (panel, BorderLayout.CENTER);
}Regards,
Devyn

How do I create a LLB that includes the top level VI and all SubVis for LabVIEW 8.0.1?

I've searched the boards, and I have not found a solution for creating
a LLB with all subVIs for LabVIEW 8.0.1. I've seen the answer to
use Save With Options. I haven't been able to locate this.
I'm not too familiar with all of LabVIEWs options, so I greatly
appreciate any help that can be offered on this.

You can do Save As... and then go to Duplicate Hierarchy to new location and then under Packiging options, select custom and then check the box that says save as llb.
Yo u can also specifiy the loaction of the files in this screen.
Kenny
Kenny

Unable to create a rule that includes "dimming" setting for lights

Just a quick head's up to the team who is monitoring the forums to correct issues with the new portal: I was unsuccessful with creating a new rule to turn on a light to a specific dimming setting. For example: "I want to create a rule for Living Room Light to turn on at 50% when Front Door is open." I am able to move the slider bar to select a 50% dimmer setting, but the rule still turns the light on to 100%. Going in to edit the rule, it appears that it saved a 100% dimmer setting. I've tried creating the rule on two different Windows 7 machines, using both Internet Explorer 11 and Chrome. I reverted to the original version of the portal, and creating the dimming rule worked fine. Thanks!

Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Can I create an executable that includes my scaling?

Is it possible to c reate an executable VI including scaling, for use on multiple systems? Please include instructions.

Keep your project all together. Add the Task and Scale to the project.
if you look inside this build you will find
\Data\NI-DAQmx.ini
[DAQmx]
MajorVersion = 9
MinorVersion = 8
[DAQmxChannel ProjectVoltageTask/Voltage]
AI.MeasType = Voltage
AI.Voltage.Units = From Custom Scale
AI.TermCfg = Differential
AI.Max = 10
AI.Min = -10
AI.CustomScaleName = ProjectScale
ChanType = Analog Input
PhysicalChanName = Dev1/ai0
[DAQmxTask ProjectVoltageTask]
Channels = ProjectVoltageTask/Voltage
SampQuant.SampMode = Finite Samples
SampClk.ActiveEdge = Rising
SampQuant.SampPerChan = 100
SampClk.Rate = 1000
SampTimingType = Sample Clock
SampClk.src=
[DAQmxScale ProjectScale]
Lin.Slope = 1
Lin.YIntercept = 0
PreScaledUnits = Volts
ScaledUnits =
ScaleType = Linear"
Right there in the exe.
Jeff
Attachments:
My Application.7z ‏379 KB

Creating an Outline

Whats the best way to create and outline that requires multipul indents (tabs) (ex 1. A. II. a.) with out having to enter each bullet as I outline?
Pages on OSX does this? Is it an oversight that is being corrected?

Hi AlexP99,
You can post feedback here.
Carolyn

Entity Memberlist That Includes Base Members?

I have created a custom memberlist for Entities. It will drive part of the ICP report. When a region runs a report they want a report to run for the INTRA regional eliminations and the INTER Region eliminations (All entities other than that region's entities.)
I have created a list that includes all regions but the region which is running the report, however I am unable to grab the base members. I get the regional parent and not the entities. Is there a way I can change my script to include the Base members? I am able to successfully pull the correct regions and the values but I need to break it down to the entity.
See below for the pieces of my script that apply-
ElseIf HS.Dimension = "Entity" Then
aEntityLists(1) = "NM Intercompany Entities"
aEntityLists(2) = "SETX Intercompany Entities"
aEntityLists(3) = "GCTX Intercompany Entities"
aEntityLists(4) = "ALT Intercompany Entities"
aEntityLists(5) = "SPOHN Intercompany Entities"
aEntityLists(6) = "SR Intercompany Entities"
aEntityLists(7) = "NOLA Intercompany Entities"
aEntityLists(8) = "SWLA Intercompany Entities"
aEntityLists(9) = "CLA Intercompany Entities"
aEntityLists(10) = "UTAH Intercompany Entities"
aEntityLists(11) = "PHYSICIAN Intercompany Entities"
aEntityLists(12) = "CORPORATE Intercompany Entities"
HS.SetMemberLists aEntityLists
End If
Sub EnumMembersInList()
If HS.Dimension = "Entity" Then
If HS.MemberListID = 1 Then
HS.AddEntityToList "US_OPERATIONS", "SETX_REGION*",[Base] (This didn’t work)*
HS.AddEntityToList "US_OPERATIONS", "GCTX_REGION"
HS.AddEntityToList "US_OPERATIONS", "ALT_REGION"
HS.AddEntityToList "US_OPERATIONS", "SPOHN_REGION"
HS.AddEntityToList "US_OPERATIONS", "SR_REGION"
HS.AddEntityToList "US_OPERATIONS", "NOLA_REGION"
HS.AddEntityToList "US_OPERATIONS", "SWLA_REGION"
HS.AddEntityToList "US_OPERATIONS", "CLA_REGION"
HS.AddEntityToList "US_OPERATIONS", "UTAH_REGION"
HS.AddEntityToList "US_OPERATIONS", "PHYSICIAN_GROUP"
HS.AddEntityToList "US_OPERATIONS", "CORPORATE_OTHER"
Any ideas on how I can change this?
Thanks for your help!
Kristin

if HS.MemberListID = 1 Then
          eLi=HS.Entity.List("SETX_REGION","[Base]")
          For i=Lbound(aLi) to Ubound(aLi)
     HS.AddEntityToList " " aLi(i)
          Next
End If
My bad I should not have used your example, What it determines the list where the entities will be added is the MemberListID so you dont need to add the list name to your script.
Edited by: Raul Rodriguez on Apr 5, 2011 12:32 PM

Unable to save a report that includes a datasource of "Microsoft SQL azure" type

I have install SSRS in azure using the following instructions (http://msdn.microsoft.com/en-us/library/dn449661.aspx) and all seems to work fine, however when I create a report in report builder 2014 (in this case empty) that includes a Microsoft SQL Azure
datasource type I am unable to save the report and get the following error message (even though when I test connection it succeeds).
"The report definition was saved, but one or more errors occurred while setting the report properties"
Reports with standard sql datasources work fine.
I have also tried creating the report using Visual Studio 2013 and get a similar error message.
I have tried this using SQL 2012 and SQL 2014 and get the same error.
Does anybody know how I can create a report with Microsoft SQL Azure datasource type?

Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Creating a query that provides a default transaction type for those transactions not categorized?

How could I create a query that provides a default transaction type for those transactions not categorized?
So assuming I have:
* Transactions table (with transactions)
* Categories table
* transactions_categories table - allows to allocate multiple categories (with a percentage)
- tranactionID
- categoryID
- percentageAllocation
* Usage is such that only non-personal categories have been applied through out data. So there is a lot of transactions with no categories applied
Aim:
* Want to create a query that creates a list of all the allocated amounts, so would include as columns: transaction.tDate, transaction.tTitle, categories.name, allocatedAmount(calculated from percentage * transaction amount)
BUT:
* How could I include in the query, the entries that cover all transaction that haven't been allocated, to a default category "personal", where the allocated Amount would be 100% of the transaction value
* And also (if it were possible), for transactions that have been categorized but not for the complete transaction value (say only 50% was allocated to a category), how to to cover this off to.

To default the value of the category:
select IIf(IsNull(Category),"Personal",Category) as Category,IIf(IsNull(Category),"100%",PercentageAllocation
) as PercentageAllocation from [yourtable]
What do you want to put the values of these ones:
And also (if it were possible), for transactions that have been categorized but not for the complete transaction
value (say only 50% was allocated to a category), how to to cover this off to.
Fouad Roumieh

Create type outline that includes stroke?

Similar Messages

Maybe you are looking for