Create unicode file and read unicode file

Hi
How can create a unicode file and open unicode file in LV
Regards
Madhu

gmadhu wrote:
Hi
How can create a unicode file and open unicode file in LV
Regards
Madhu
In principle you can't. LabVIEW does not support Unicode (yet)! When it will officially support that is a question that I can't answer since I don't know it and as far as I know NI doesn't want to answer.
So the real question you have to ask first is where and why do you want to read and write Unicode file. And what type of Unicode? Unicode is definitly not just Unicode as Windows has a different notion of Unicode (16 Bit characters) than Unix has (32 Bit characters). The 16 Bit Unicode from Windows is able to cover most languages on this globe but definitly not all without code expansion techniques.
If you want to do this on Windows and have decided that there is no other way to do what you want you will probably have to access the WideCharToMultiByte() and MultibyteToWideChar() Windows APIs using the Call Library Node in order to convert between 8 bit multybyte strings as used in LabVIEW and the Unicode format necessary in your file.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

How to locate a phrase in a file and read the file after that location

I have a text file with the following contents
Previous date data.....[10,000 lines ]
same as below but with earlier dates
* ABC AutoJournal Utility - Version 2.00 *
Beginning Reportournal at (time): Tue May 04 18:07:46 IST 2010
AutoJournal assigned updated records a timestamp of (server time): *2010-05-04* //THIS IS THE PHRASE i am looking for
# Posted Date,           Policy, Reason, Amount, Insured Name, Agent Name
1) 2010-04-26 00:00:00.0, 7363496, GRSS, 10.0, KRASSNER W, BROOKS STEVEN E
2) 2010-04-23 00:00:00.0, 4768200, GRSS, 0.0, STECKLER M, STECKLER GIBSON
3) 2010-04-20 00:00:00.0, 7328358, GRSS, 4.0, LYON GREGO, WEST MICHAEL J
4) 2010-04-20 00:00:00.0, 4754236, GRSS, 0.0, PEEBLES JA, HOFFMANN GABRIE
5) 2010-04-22 00:00:00.0, 7363793, GRSS, 2.0, LAHAYE NAN, GONYEA MICHAEL
6) 2010-04-26 00:00:00.0, 7360935, GRSS, 35.0, AMITAY NOA, WIESEL HENRYI need to locate the date and start reading the data for the current date only i.e Today's date
Thus far i have done this....
it's just the outline
String srchDate="2010-05-04";
BufferedReader bf=null;
               try {
                      bf = new BufferedReader(new FileReader("C:\\File.log"));
                   int lineID = 0;
                   Pattern pattern = Pattern.compile(srchDate);
                   Matcher matcher = null;
                   String line =null;
                      while((line=bf.readLine())!=null){
                             System.out.println(line);
                                lineID++;
                                matcher = pattern.matcher(line);      //Will match the entire line against srchDate and will return false ...
                                if( matcher.find()){
                                    //do stuff...      //stuck here
                                      //get the line no..
                    } catch (Exception e) {
                         e.printStackTrace();
                    }     Some help on this would be very helpful...
Thanks :)
P.S:This needs to be done using java 1,4 only

kevinaworkman wrote:
RainaV wrote:
kevinaworkman wrote:
If I were you, I would split your problem up into smaller pieces.
Write a method that reads a file into a String.This file is actually quiet huge i am not sure if this would work as the file will only grow in size in the future....How big is "quiet huge"? I wouldn't worry about optimization until you've actually encountered a problem.FYI The file size is 20MB ...
>
Write a method that figures out where in a String a substring occurs (hey, that one might be done for you already...).
Write a method that returns a substring of a String, based on a start index and a length (something tells me this one might exist already too).
Write a method that converts a String to the correct datatype.
Regarding these steps i am not sure if i follow>>
the lines you see 1)....
2).... till last line say 800..
I don't understand your question.I was wondering if your appraoch would be complicated but will give it a try...
>
Actually i thght i would just read one complete line and store that in an list and then write it to an excel sheet...Okay, and the steps I outlined would work for reading in one line at a time, as well. It's just one more step.
i am unable to locate this phrase using regex so can you suggest something on that lines
You're trying to find today's date? Why does that require a regular expression?I want to read the data after i have located today's date in the Text file so i need to locate it first but the code i posted doesn't work so i suggested if you can advice on the correction....as per my approach mentioned in the original post
But if i do it your way then definately no need for regex i need to store all of it in a string and work woth sub strings so on,...

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Do i need acrobat pro to open a pdf i created in quark and reduce the file size?

do i need acrobat pro to open a pdf i created in quark and reduce the file size?

i'll try that! thank you.
Daniel Flavin <mailto:[email protected]>
June 24, 2014 at 3:23 PM
>
do i need acrobat pro to open a pdf i created in quark and
reduce the file size?
created by Daniel Flavin
<https://forums.adobe.com/people/Daniel+Flavin> in /Creating, Editing
& Exporting PDFs/ - View the full discussion
<https://forums.adobe.com/message/6493113#6493113>

41810-error creating the menu,cannot read the file

While creating the menu i am getting the following error
"41810-error creating the menu,cannot read the file".PLease help to rectify this error.

It is probably attached to the Forms module (see the library node in the navigator window).
In a general way, try to know where are youe design modules (*.pll, *.mmb, *.fmb), look at the FORMS_PATH variable to see what directories are part of this environment variable, compile every design time module to get the executable versions *.plx, *.mmx and *.fmx, then put these executable files in one of the directories pointed by the FORMS_PATH variable.
Francois

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
== When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

Brilliant! Problem solved! Thanks so much.

How to open and read binary files?

How do I open and read Binary files?

Did you look on The Unarchiver's web site where it has a link to older versions? http://theunarchiver.googlecode.com/files/TheUnarchiver3.2_legacy.zip
The best thing to do is ask your friends what programs they used to produce these files, or at least what format files they are producing. Otherwise it's like being shown a car and given a bundle of 200 keys with no idea to which one to use, or even if any of them work with that car.
Using The Unarchiver will likely not do anything because it too will not know what format files are involved, and they may not even been in an archived format. If they sent you a Word file without telling you (a favorite of Windows users to do -- it drives me crazy when they could have just sent them in plain text), The Unarchiver won't open them. If it's a picture file then using Hexedit will just show you a bunch of unintelligible stuff as shown in an earlier post, though you may see a line of text providing a hint.
As I said earlier, often .bin may be an executable program which needs another program to actually interpret it. That's what Java is trying to do. Still, it may think it can execute the file, but it is highly unlikely somebody would send you an executable program (and if they did I would not trust it). For all you know it may be a Windows virus.

Crashes and read-only file systems

Notice: I apolgize for the long post, I've tried to be as thorough as possible. I have searched everywhere for possible solutions, but things I've found end up being temporary workarounds or don't apply to my situation. Any help, even as simple as, "have you checked out XYZ log, it's hidden here", would be greatly appreciated. Thanks
I'm not sure what exactly caused the issues below, but they did start to happen within a day of running pacman -Syu. I hadn't run that since I first installed Arch on December 2nd of this year.
Setup:
Thinkpad 2436CTO
UEFI/GPT
SSD drive
Partitions: UEFISYS, Boot, LVM
The LVM is encrypted and is broken up as: /root, /var, /usr, /tmp, /home
All LVM file systems are EXT4 (used to have /var and /tmp as ReiserFS)
The first sign that something was wrong was gnome freezing. Gnome would then crash and I'd get booted back to the shell with all filesystems mounted as read-only. I started having the same issues as this OP:
https://bbs.archlinux.org/viewtopic.php?id=150704
At the time, I had /var and /tmp as ReiserFS, and would also get reiserfs_read_locked_inode errors.
When shutting down (even during non-crashed sessions) I would notice this during shutdown:
Failed unmounting /var
Failed unmounting /usr
Followed by a ton of these:
device-mapper: remove ioctl on <my LVM group> failed: Device or resource busy
Nother of these errors had ever appeared before.
After hours of looking for solutions (and not finding any that worked) I was convinced (without any proof) that my Reiser file systems were corrupt and so I reformatted my entire SSD and started anew - not the Arch way, I know I set all logical volumes as EXT4.
After started anew, I noticed
device-mapper: remove ioctl on LVM_SysGroup failed: Device or resource busy
was still showing up, even with just a stock Arch setup (maybe even when powering off via Arch install ISO, don't remember). After a lot of searching, I found that most people judged it a harmless error, so I ignored it and continued setting up Arch.
I set up Gnome and a basic LAMP server, and everything seemed to work for a couple of hours. Soon after, I got the same old issues back. The System-journald issue came back and per the workaround on https://bbs.archlinux.org/viewtopic.php?id=150704 and a couple other places, I rotated the journals and stopped journald from saving to storage. That seemed to stop THOSE errors from at least overwhelming the shell, but I would still get screen freezes, crashes, and read-only file systems.
I had to force the laptop to power off, since poweroff/reboot/halt commands weren't working (would get errors regarding the filesystems mounted as read-only).
I utilized all disk checking functions possible. From running the tests (SMART test included) that came as part of my laptop's BIOS to full blown fsck. All tests showed the drive was working fine, and Fsck would show everything was either clean, or
Clearing orphaned inode ## (uid=89, gid=89, mode=0100600, size=###
Free blocks count wrong (###, counted=###)
Which I would opt to fix. Nothing serious, though.
I could safely boot back into Arch and use the system fine until the system decides to freeze/crash and do the above all over again.
The sure way of recreating this for me is to run a cron job on a local site I'm developing. After a brief screen freeze (mouse still moveable but everything is otherwise unreponsive) I'll systemctl status mysqld.service and notice that mysqld went down.
It seems that it's at this point my file systems are mounted as read only, as trying to do virtually anything results in:
unable to open /var/db/sudo/...: Read-only file system
After some time, X/Gnome crashes and I get sent back to shell with
ERROR: file_stream_metrics.cc(37)
RecordFileError() err = 30 source = 1 record = 0
Server terminated successfully (0)
Closing log file.or_delegate.h(30)] sqlite erro1, errno 0: SQL logic error or missing database[1157:1179
rm: cannot remove '/tmp/serverauth.teuroEBhtl': Read-only file system
Before all this happened, I was using Arch just fine for a few weeks. I wiped the drives and started anew, and this still happens with just the minimal number of packages installed.
I've searched for solutions to each individual problem, but come across a hack that doesn't solve anything (like turning off storing logs for journal), or the solution doesn't apply to my case.
At this point, I'm so overwhelmed I'm not even sure where exactly to pick up figuring this issue out.
Thanks in advance for any help

Did this occur when you booted from the live/install media?
What is your current set up? That is, partitions, filesystems etc. I take it you have not yet reinstalled X but are in the default CLI following installation?
If turning off log storage didn't help, reenable it so that you may at least stand a chance of finding something useful.
What services, if any, are you running? What non-default daemons etc.?
Does it happen if you keep the machine off line?
Have you done pacman -Syu since installation and dealt with any *.pacnew files?
Last edited by cfr (2012-12-26 22:17:57)

How to import a csv file and read in sap ui5?

Hi,
I want to import a file and read it contents to bind it to table.How to do it?
Thanks in advance.

I tried to do this all from within the application but found it easier to just start with a JSON file. But, you can use a JS library to convert your CSV into JSON from within the application like this one:
archan937/csonv.js · GitHub
I just converted my CSV to JSON. Once you have that, all you need to do is instantiate a model for it and bind to table.
onInit: function () {
    var oModel = new sap.ui.model.json.JSONModel("PATH TO YOUR JSON FILE");
    this.getView().setModel(oModel);
<Table id="idProductsTable"
    inset="false"
    items="{
      path: '/ProductCollection',
      sorter: {
        path: 'Name'
    }">
The UI5 demo kit is a good resource. I believe it'll be same/similar for SAPUI5:
OpenUI5 SDK - Demo Kit
See here for example of defining your model and binding to a table:
sap.m Explored

VBScript to read the content of a .csv file and delete old files mentioned in the .csv

I have a Windows 2003 file server.
I have generated a report in .csv format, about the files which are older than 1 year.
I need a VBScript to read the .csv file and delete the files which are enlisted there.
Can someone please help me with this?

Look into the "Learn" link above. There are resources and instructions on how to write VBScript code. Look into how to use the FileSystemObject.
¯\_(ツ)_/¯

Read a csv file and read the fiscal yr in the 4th pos?

Hello ABAP Experts,
how to write a code for read a csv file and read the fiscal year in the 4th position.
any suggestions or code highly appreciated.
Thanks,
BWer

Hi Bwer,
Declare table itab with the required fields...
Use GUI UPLOAD to get the contents of the file (say abc.csv) in case if the file is on the presentation server...
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = 'c:\abc.csv'
   FILETYPE                        = 'ASC'
    WRITE_FIELD_SEPARATOR           = 'X'
tables
    data_tab                        = itab
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use OPEN DATASET in case if the file is on the application server..
After that USE SPLIT command at comma to get the contents of the 4th field...
Regards,
Tanveer.
<b>Please mark helpful answers</b>

File Adapter : read XML file with data validation and file rejection ?

Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

Why can I no longer download and read .pdf files

I have never had any problems downloading and reading .pdf files until I 'upgraded' the Adobe reader to version 11. Now all attempted downloads fail because "I don't have the necessary helper application or even C:\DOCUME~1\Will-o\LOCALS~1\Temp\Back Channel II - The Vietnam Betrayal - Chaps 1&2.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences. What in the world is going on and how do I fix it?
Under 'Tools - Applications - Adobe Acrobat Document, the I've selected 'Use Adobe Reader.' However since I also have Adobe Acrobat 8.3, I've tried substituting that for the Reader, but that doesn't work either. Please help.

Brilliant! Problem solved! Thanks so much.

Can I save and read text files on a server that I host?

Hello everyone,
I am a java hobbiest. I was wondering if I set up my own server, running out of my house, could I have my applets save to my computer and read from my computer without having to learn JDBC and a DATABASE language. In other words could i just have my applet save and read text files from and to my server?
I'm trying to set up a sight for my 5th grade class where parents can log into. Thanks for your time.
Oh yeah, which is easier, learning how to set up a server or learning JDBC and a DATABASE language?
If you have any other good idease please tell me them
Thank you, Bryan

Short answer: This isn't gonna work
Long answer: For this to work, the first thing you're going to need is a static IP address and a DNS name registered -actually you don't necessarily need #2 but you're probably gonna want it and it's by far the easier of the steps.
As far as I know to get a fixed IP address you've either gotta be directly attached to a larger network (ie university network) or get a leased line from an ISP.
Once you've got that done come back to us.

How to read multiple files and generate multiple files

Dear all, I would like to process some LTE measurement files. Currently I can only load a single file and process the data and save it to a single binary file. Since I would like to run the code continously, could someone show me how I can modify the code to load multiple files and specify multiple files to save the process the data please? I have attached the code to the question. Many thanks for your help.
Attachments:
RF Analyze IQ File.vi ‏46 KB

There is no official "bin" format and I am confused by some of your statements:
Kiwibunny wrote:
Currently I can only load a single file and process the data and save it to a single binary file. Since I would like to run the code continously, could someone show me how I can modify the code to load multiple files and specify multiple files to save the process the data please? I have attached the code to the question. Many thanks for your help.
What you could do is use "list folder" with *.bin as pattern, and use a FOR loop and iterate over all *.bin files found in a selected folder.
In any case, your code uses some weird constructs and you seem to do way to much. Are you using "continuous run" mode? Don't!
Use a proper state machine instead ot these stalling loops. Why do you need to query the queue after each enqueue? Why do you need a queue at all?
LabVIEW Champion . Do more with less code and in less time .

Create unicode file and read unicode file

Similar Messages

Maybe you are looking for