Create unique user accounts for each Oracle process
hi,
Please tell me the command to create unique user accounts for each Oracle process
Thanks
create unique user accounts for each Oracle processWhat do you mean by unique user account for each oracle process ? Provide more information.
do you mean create oracle user?
create user <username> identified by <password> default tablespace <tablespace_name>;
-Anantha
Similar Messages
-
Create unique user profiles for each separate session
Hi,
How can I configure TS environment so that each user (who logs onto Windows using the same generic Windows user ID) gets their own unique Windows user profile.
For example, imagine a scenario where the users are logging onto Windows using the shared user "SYSTEMAPP"
The intention is to configure the TS server's Windows, so that it creates unique user profiles for each separate session, for example:
- SYSTEMAPP
- SYSTEMAPP.000
- SYSTEMAPP.001
- SYSTEMAPP.002 (etc...)
The server version for TS is Windows Server 2012 and not joined to AD. User IDs are created at Local Users and Groups.
Kindly advise.Hi Susie,
Just to illustrate my point further. Let's say a user logged into the server using user ID SYSTEMAPP for the first session. So, if
you browse the folders in the server, you'll be able to see this:
C:\Users\SYSTEMAPP
Then, another user logged into the same server as SYSTEMAPP user using other session. In this case, my intention is to configure the
server to create another unique user profile as below:
C:\Users\SYSTEMAPP.000
Subsequently, if more users logged in using the same account, the unique counter number will keep on adding...
C:\Users\SYSTEMAPP.001
C:\Users\SYSTEMAPP.002
C:\Users\SYSTEMAPP.003
Previously, I checked from my third party software vendor that this can be done but I still cracking my head on this which is why led me
to this forum.
Kindly advise. -
I have created separate user accounts for my 2 boys on my macbook. How do i get my itunes library onto their new ipods?
They can't. Which came first - the chicken or the egg? Actually, that's a bad comparison but a sync must come first.
The library is actually part of iTunes and it contains everything. iTunes is then configured so that you (or they) determine which portion of everything will be synced to each iPod (identified by a unique name, see below for an example of an iPod and an iPad). iTunes can't make that decision until AFTER it knows which iPods exist.
By the way, I (you, they) can very easily change the name of each device to whatever I (you, they) wish to call it. -
I have 3 users on one computer with 3 unique user accounts. Each of us have separate and unique ITunes accounts. How do we share our music libraries using Home Sharing? Everything that I can find talks about sharing between networked computers, but this is all on the same computer. I just want to share between ITunes accounts. Thanks!
Hi b noir, I also have two users on one pc with two different iTunes libraries. But I also want to put them onto an external hard drive so that I can free up some memory on the pc. So I figure I need to consolidate the two users iTunes libraries first before moving to hard drive? But not quite sure how to do that on the iTunes 11? Thanking you in advance!!
-
I have four iphones on my icloud account, can i create an icloud account for each phone?
I have four iphones on my icloud account, can i create an icloud account for each phone?
Welcome to the Apple Community Joe.
There is nothing stopping you doing so, but you won't be able to sync anything between them. -
Hi there, newbie here. Wondered if anyone can help, opened another user account for daughter on windows 64, and when we tried to open itunes a message came up saying it could not open because of digital signature policy, when i go back to my user it opens ok.
Could anyone help.
Cheersam not prepared to enter my credit card also on her account application.
You can enter it on the registration page then delete it immediately after you complete the registration.
If I purchase a iTunes card with some credit, can I open the account for her just with the code?
If you wish. Instead of going to Create new accout, go to Redeem on the main iTunes store screen, enter the code, then select *Create new account*.
What will happen if the credit on the card gets to zero?
She will not be able to make a purchase until another gift card is entered or a CC is linked to the account. -
I need to create a user account for my wife that initially duplicates mine
Thank you in advance for your thoughts and/or links.
It is becoming more and more "the norm" for me to come upstairs to my MAC and find that my wonderful wife has five or more Safari windows open, three Word documents open, Mail up and running, etc...
I certainly don't mind her using the computer, but I really like to come to my MAC with it having a nice clean desktop and ready for me to go at video editing etc.
I have set her up a user account, but of course all our bookmarks, documents, etc. are under my username.
Is there a script or an easy-to-follow step-by-step process to start her out with all the same Mail preferences, messages, Safari bookmarks, access to documents, etc.?
I read one response about iTunes and iPhoto that I really liked - he/she set up a shared user (or something like that) and used it for every users iTunes & iPhoto library. I guess the same thing could be accomplished by sharing ones iTunes and iPhoto libraries...
Anyway, you help/links would be appreciated.
DwaineI can see how it'd be possible to copy of one user's info into another's folder by temporarily changing ownership permissions. This would get you to your "start her out with all the same...." point.
itunes/iphoto libraries would be straightforward, as you've found - sharing documents too.
It can be done - but if you'll forgive me - I'll wait a day or so in case someone posts an easy- no playing with permissions-solution that saves you a lot of hassle.
Another option is to set up a "video editing" user that you use when you want a clear desktop/no other programs loaded etc environment. You can enable fast user switching in sys prefs-accounts - so it's really no bother to change quickly; & have your various video stuff easily accessible to you - yet switch back almost instantly to a normal account with mail/safari etc all running. This may be a better idea if your editing needs loads of memory & pushes the processor to near it's limit. -
Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1 -
Creating second user account on TC. No separate folder and security issues
Hi,
I've had my TC for some time, and after some start-up triuble all is working very nicely now.
That is, until I wanted to set up the TC for my girlfriends backups too. On my mac, i created a user account for the TC, and i see two folders when i connect to the TC: "Timecapsule" and "MyAccountName". Now when i did the same on the other Macbook, i get only the "Timecapsule" account, not a folder (or sharepoint) with her account name. Also, I saw that as the sparsebundle files are on the 'main' sharepoint, it is possible to access both from both computers, wierd.
Any thoughts on how I can use 1 TC for 2 computers with 2 sharepoints for both?
So, on my own computer i would have a general folder and a personal folder, on the other the same...
Help much appreciated!To clarify: When i connect to the TC, i mount two volumes, but on the other Macbook, I only get the main volume, not the specific user volume.
-
How to use migration assistant without creating dual user accounts
I want to use migration assistant to transfer apps, software & files on my macbook pro to my new macbook air. How can I do this without creating two user accounts for myself on the m-book air -- my account from the m-book pro & the one that the air makes me create as soon as I do start-up? Can I just use the same name & password for both? or will that make things go badly awry?
Thanks!If you have not booted the MBA for the first time and gone through the Setup Assistant, then I would use the Setup Assistant to make the transfer before you even create another user account. However, if you've already created the new user account on the MBA, then create a new admine one with a different username than the account you will migrate. Log into this new account, delete the first account you made, then use Migration Assistant to transfer your account from the MBP.
-
Admin and User Accounts for Single User
I am the only user of my iMac. According to the article I found below, I should create a User Account for myself and use that one for my daily work. Is this correct?
"Don't use the administration account for anything other than setting up the machine and applications or changing "permanent" settings (if you want to, say, change network settings as a normal user you'll be prompted for the admin password, and since you'll do configuration changes less and less often as time progresses, this isn't a problem)."Aha! It would appear that this is exactly the sort of thing that using a non-admin account would normally protect you from.
..."yet all applications are available to me in Finder > Applications"...
That's good news. So I wonder where the "Applications" folder has been moved to... The folder that is opened when "Finder" is activated is something that can be changed through the "Finder" > "Preferences" menu under "General". I suspect that it is either "Home" or "Documents", so that when you refer to "Finder > Applications", the path is actually either "Macintosh HD" > "Users" > "Applications", or else "Macintosh HD" > "Users" > "Documents" > "Applications".
To put things back, it might be easier to temporarily remove any "Parental Controls" from your current account and check the "Allow user to administer this computer" check box.
Then rename the "Macintosh HD" > "Applications" folder (the one with only "iTunes") to something else, eg "Applications-temp". After that, open a second window and drag the folder you refer to as "Finder > Applications" to where it belongs in the "Macintosh HD" window.
Now check the versions of "iTunes.app" in the "Applications" and "Applications-temp" folder - one way to do this is to click on the iTunes icon once and change the "Finder" window to "Column View" ("View" > "As Columns", or use the keyboard shortcut ⌘3). The version number should be displayed in the "Preview" panel. Take the older version (lower version number), and throw it away. If necessary, drag the newer version into the "Macintosh HD" > "Applications" folder.
Now, open "Macintosh HD" > "Applications" > "Utilities" > "Disk Utility.app", select your hard drive, and click the "Repair Disk Permissions" button (not the "Repair Disk" button). This might take a few minutes.
Hopefully that will do it, and you can go back and make the account a non-admin again.
I should mention that with some third pary apps, if they were originally installed while the "Applications" folder had been moved, they may complain if their location is changed. It might be necessary to reinstall those, although it will likely depend on a case to case basis. -
We have several apple products in the family. I would like to set up different icloud accounts for each memeber. I lately noticed having activated different devices with same icloud account that each device can access everyones messages by going in their settings and clicking which number or email they want to use to see messages. Let me make sure I am understood, on my sons ipod in his messages settings he can switch to my cell number and see all my messages. Re setting the devices isn't my great issue but can i set up each kids user account on my mac to their individual icloud accounts?
Thanks!Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud). -
Error while getting the ORACLE user account for your concurrent request
Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
KrishnaKrishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ -
Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar. -
How to create Mobile User Account
Hi all,
I have a dumb question but it makes me crazy !!!
I'm new in CRM 5.2 and in mobile as weel.
My question is : How to create a user acount into my mobile infrastructure ?
I've followed the following explanation but I don't find the solution :
[help|http://help.sap.com/saphelp_crm60/helpdata/de/c8/2ae1a3c73245c8aef8c4b69c2ff072/content.htm]
In there, it tells me to go thought User Management tool of Mobile Application Studio ( is it Microsoft Visual Studio ?) but in there i do not find any tools.
Thanks for your future help
Regardshi,
Creation of User Accounts
Purpose
This process describes the steps required to create user accounts for secured and controlled access to the Mobile Application Repository (MAR). User accounts are created for consultants, who intend to customize mobile client applications using Mobile Application Studio (MAS). User account allows a consultant to log on to MAS.
Process Flow
1. During the installation of MAR, the system enables the User Management feature.
If MAR is upgraded from a release prior to 3.0 to the current release, the User Management feature must be enabled manually by system administrator. This is done by changing the umfrc parameter value to YES in the ARS_SYSTABLE.
2. The CRM technical administrator creates a DSN to access MAR by using the default internal login arsdb with password arsdb.
3. The CRM technical administrator carries out the following tasks using the User Manager tool of MAS:
a. Creates user accounts.
b. Associates each user account with a standard MAR profile. For more information, see Profiles of the Mobile Application Repository.
c. Specifies a password for each user account.
Login IDs of the Mobile Application Repository
Definition
A login ID is a source through which users log on to Mobile Application Studio, and connect to the Mobile Application Repository (MAR). When MAR is installed, standard login IDs are available by default. While creating user accounts, the system administrator associates a standard login ID with the profile of each user account.
Structure
Login ID
Allows you to:
ARSAdmin
· Perform administrative activities in MAR.
· Create and modify development objects in MAR.
· Modify the password of a user account.
ARSDeveloper
· Create and modify development objects in MAR.
· Modify your own password.
ARSUser
· View development objects in MAR.
· Modify your own password.
ARSSys
· Get information about the MAR.
· Validate MAR users.
ARSdb
Create a DSN for MAR. The default password for this login is arsdb.
Profiles of the Mobile Application Repository
Definition
A profile of the Mobile Application Repository (MAR) is a collection of access rights defined for:
· Development objects, like tiles, tile sets and business objects of mobile client applications
· Services of MAR like change lists and namespaces
Structure
The standard profiles that are available are listed below.
Profile name
Associated login ID
Allows you to:
Administrator
ARSAdmin
· Perform administrative activities like creating and maintaining users.
· Read and write repository specific information (ARS_SYSTABLE).
· Create and modify development objects in MAR.
· Release and revert a change list.
· Transfer the ownership of objects to another MAR.
· Create link objects to integrate tile set help.
· Create and modify framework objects in MAR.
ROGuest
ARSUser
· View development objects in MAR.
· Modify your own password.
Developer
ARSDeveloper
· Read repository specific information (ARS_SYSTABLE).
· Create and modify development objects in MAR.
· Release change lists that have been created only by you.
· Modify your own password.
· Transfer the ownership of objects to another MAR.
SPDeveloper
ARSDeveloper
· Read repository specific information (ARS_SYSTABLE).
· Modify your own password.
· Create and modify development objects in MAR.
This profile does not allow you to release change lists.
QMResponsible
ARSDeveloper
· Read repository specific information (ARS_SYSTABLE).
· Create and modify development objects in MAR.
· Modify your own password.
· Transfer the ownership of objects to another MAR.
· Release and revert change lists.
This profile does not allow you to create a change list.
Coordinator
ARSDeveloper
· Read repository specific information (ARS_SYSTABLE).
· Create and modify development objects in MAR.
· Release and revert change lists.
· Modify your own password.
· Transfer the ownership of objects to another MAR.
Frwkuser
ARSDeveloper
· Read repository specific information (ARS_SYSTABLE).
· Create and modify development objects in MAR.
· Release the change list you have created.
· Transfer the ownership of objects to another MAR.
· Create and modify framework objects in MAR.
Infodeveloper
ARSDeveloper
· Read repository specific information (ARS_SYSTABLE).
· Create and modify development objects in MAR.
· Release the change list you have created.
· Create link objects to integrate tile set help.
thanks
karthik
ifhelpfull reward me some points
Maybe you are looking for
-
Purchase requisition problem?
hi what is the difference when deletion indicator is set in purchase requistion line item in the item overview detail and and when we tick on the check box closed in the item detail.As far as my view is concerned both are same(no further purchase ord
-
I am on an Adobe Reader and I don't remember my password for the contact signature of my name (also the preparer signature of my name but I remember they were one and the same)
-
Is it possible to change memory size while runtime?
Hi! Is it possible to set the Xmx value while runtime? I try to do something like this java Myclass -Xmx128mBut only in a dynamically way while my application is running. I'm developing an image-rendering - extension for an existing app and there's n
-
Dropping users and their objects
Is it possible to drop users and their objects (default tablespaces, stored procedures, etc.) ?
-
"Install new ink cartridges to continue." Error
After just installing new ink cartridges, my HP Photosmart C6180 All-in-One has the audacity, the gall, and the nerve to tell me that I need to "Install new ink cartridges to continue."! Now why, oh why, in the Wild World of Wonka, would my printer d