Create Upgrade Evaluation Site Collections Timer Job does not send notification Email when the Site is created
Hello Everyone,
My problem is:
The Create Upgrade Evaluation Site Collections job does not send a Notification Email when the Eval Site is created. I only get a notification E-Mail that mention that a Upgrade Evaluation Site Colletion is requested and then after 27 Days that the Evla
Site will be deleted in three Days.
My Enviroment:
SharePoint Foundation 2013 Sp1 on Windows Server 2012
Exchange 2010 SP3
I hope someone can help.
best regards
domschi
Hi domschi,
As I understand, you didn’t receive email generated from Create Upgrade Evaluation Site Collections timer job. While you might receive email generated from Delete Upgrade Evaluation Site Collections.
When you request an evaluation site collection, the request is added to a Timer job
which runs once a day. You will receive an e-mail message when the upgrade evaluation site is available. This might take up to 24 hours. The message includes a link to the evaluation site. Upgrade evaluation site collections are set to automatically
expire (after 30 days by default).
Please go to CA > Monitoring > Review Job Definitions, locate issue timer job and click Run Now. Then go to Job History and check if the issue job failed to run.
Also, please check if the email are received by Exchange Hub server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support
Similar Messages
-
i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why? edit
DetailsSorry, I should distinguish between slow loading and manual reloading.
I understood your problem to be that Firefox never finished loading the page, i.e., some part of the page was loading too slowly.
By reloading, I meant Ctrl+r (or the reload button), to manually reload the page. You can disregard any cached files and reload all content fresh from the server by adding the Shift key, i.e., Ctrl+Shift+r (helpful when specific sites do not load correctly).
If the page is automatically reloading itself over and over, that sounds like a completely different problem. -
after installing lion, time machine does not always back up. The back up disk is occasionally not recognized. Help!
This is easy one.. for most.. just restart the TC.. ie pull out the power.. count to 10.. plug in the power.
If the simple doesn't work you can see more info here.
C12 http://pondini.org/TM/Troubleshooting.html -
URGENT: createSubscription does not send notification
Can anyone help me i am creating a subscription with
ISubscription subscription = subscriptionManager.createSubscription(
resourceContext // resource context
, sName // name
, condition // condition
, resource // resource
, channel // channel
, recipientListTmp // recipient / recipient list
, attributes // attributes
but some recipients receive a notification and some dont
Can some one help me with an example.
Please help,
FilipeHi domschi,
As I understand, you didn’t receive email generated from Create Upgrade Evaluation Site Collections timer job. While you might receive email generated from Delete Upgrade Evaluation Site Collections.
When you request an evaluation site collection, the request is added to a Timer job
which runs once a day. You will receive an e-mail message when the upgrade evaluation site is available. This might take up to 24 hours. The message includes a link to the evaluation site. Upgrade evaluation site collections are set to automatically
expire (after 30 days by default).
Please go to CA > Monitoring > Review Job Definitions, locate issue timer job and click Run Now. Then go to Job History and check if the issue job failed to run.
Also, please check if the email are received by Exchange Hub server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected
My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
DanBUMP
Any ideas? -
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
When I accept meetings in outlook 2010 on my Iphone it does not send my acceptance to the requestee. How do i fix this
Outlook 2010 is an email client that runs on a PC. It does not run on an iPhone at all.
Is this a corporate email account? What did your IT department say when you went to them about the problem?
The ability to correctly process meeting requests when using an Exchange server depends on the version of Exchange your organization is running. It has nothing to do with what mail client you use on your PC. -
Upgrade to mountain lion, time machine does not work
After upgrading to Mountain Lion. My time machine does not save infomation anymore. I've also lost a folder on my macbook pro. This is the error message that I'm receiving. Please help
Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65c900560 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65b209e10 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65cd08190 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.That seems unusual unless you changed drives.
If you upgraded the drive it sees the computer as a different one to the original backup..
I am not sure that it isn't better to do a fresh backup but you can try and inherit the old backup..
See Pondini
B5 B6 http://pondini.org/TM/Troubleshooting.html -
Upgrade to lion and time machine does not work
I upgraded to Lion and my WD Live network drive that I always used for wireless time machine back ups no longer works. I get the following error:
Time Machine could not complete the backup.
The network backup disk does not support the required AFP features.
What can I do to fix this?Your network drive isn't compatible with Lion. See #C16 in Time Machine - Troubleshooting.
-
Search does not work in one of the site collections
The Search in one of the site collections in my extranet sites is not working. When I search it the does return any results, it's not finding anything. I went to search just the documents library it does not work as well. I didn't find any errors in the
log or event viewer. All other site collections the search work fine. There is no exclusion in the search rule. The site collection is set as searchable. The site has no crawlog log.
Any help?No. I added pdf. The site collections is not being crawled it doesn't exist in any of these tables .msscrawlhistory
.msscrawlcontent
.msscrawlurl -
Hi All,
I encountered this issue in my client site when implementing project server 2013.
At First I thought that this issue occurred intermittently , sometimes project creation (create project from PWA- assign resources with team member -save and publish) trigger email notification to the assigned team member and sometimes not. (new task notification)
I have checked with our infrastructure team and verify that I use the right SMTP server address and port , and cross check with them for their side configuration (exchange) , we did not find anything wrong on both settings.
and then we found out that the failed notification email comes from project creation using defined project templates in an enterprise project type, even from a project that consist of template schedule , we added new task on that project and assign a team
member on that task that resulted with notification sent to the team member, but not with task that comes from templates.
can someone help us on this issue, or is there any CU on this?
I appreciate any comments and feedback, Thanks for your attention!
Regards,
Nugroho
EPM implementatorKirteshtiw,
Yes we did create the template from project professional and as far as i know,
the only way to create template is just to save it, no option to publish the template.
When you create a new project from template for some of the task you remove the resources then assign resource to those tasks then save and publish the project.
<--there are no resources assigned from the template, when i assign resources (new assignment) this will not trigger notification
Or create a new task under summary task assign resource then save and publish the task you notification sent to the resource means it is working.
<--new task (not from template ) also trigger the notification -
so i lost my iphone and i remotely locked it on my ipod and it says i will recieve a email when its been locked but i never got one does tht mean the thief couldve went to itunes and made it a new device..?? please reply im really worried and i just go it like 2 weeks ago :3
and when i remote lock it am i still able to find it ??aww so if they restore it i wont be able to dial the old phone number that i had on it even if i turned it on.... and since i never got a message saying that the lock has been successfully added they already restored it :3
and would they just get a bill of their own.. i dont want to get a bill cause of them using it.. -
The error is "This message has not been downloaded from the server". I used to get this sometimes on my iPhone 3G too. The messages can be downloaded by a PC client or GMail or another type of smartphone. The
ChrisMy question, which I thought was obvious, was has Apple got a workaround for this obvious error in their IOS email client. It hasn't been fixed and it's about time it was.
The fact that this problem :-
1. Manifests itself on both iPhone and iPad devices
2. Does not show up on Windows clients (Outlook 2007, Outlook 2010, Windows Live Mail, Becky 2)
3. Does not show up on web clients (GMail, Pobox, Hotmail)
4. Does not show up on MacOS clients
5. Does not show up on Android clients (Mail, Touchdown)
Leads to the inevitable conclusion that the problem is not device related (so I agree with you there) but is client / platform (Mail or IOS) related. The fact that more research on this forum shows that this issue has been around since IOS 1.0 days corroborates this conclusion.
I do not agree with you presumption that the issue is with the message, all the evidence above refutes this.
So here I am on the official Apple discussion forum seeking enlightenment and assistance from the combined knowledge of the assembled technorati. And quite frankly your terse, bad tempered message falls way short. If there were an "unhelpful answer" button on your message I would have pushed it. -
New firefox sync does not send verification email. I'm locked out.
Once I installed the FirefoxDeveloperEdition, I tried to sync my datas, but noticed it didn't work.
I dug a little and found there is a brand new Firefox Sync (maybe trying an old Firefox Sync account could notify the user it cannot add any new device).
So I followed the support article in order to migrate and disabled my old Firefox Sync first. Then I tried to register a new account, and I'm stuck at the email verification step. I click on the “send verification email” but I don't receive anything.
Now I cannot sync anything for two days, and can't figure what's wrong. I use the same email as this “mozilla support account”. I forgot my password so I did request for a password modification and received the email. Everything seems to work so far. Except for Firefox Sync.
Did I miss something ?Hi CoryMH and loranger,
If I read that currently you have reset your password and have successfully reset the password of the old sync, however there is no evidence of the new account syncing in the FirefoxDeveloperEdition because the verification email is never sent.
So I tested this with an account I know that already exists and it did not detect the account right away:
I submitted the bug:
https://bugzilla.mozilla.org/show_bug.cgi?id=1097781
But please try to remove the account from the Developer's edition and add it one more time and go to about:accounts.
Does it sync on the second try without the verification email?
Maybe you are looking for
-
I am planning to buy an iPad 2 WiFi 3 G from USA , will it work in Egypt?
HI , I am planning to buy a new iPad 2 WiFi + 3 G from USA ,,,, and i will use it in Egypt.. will it be unlocked for AT&T in Egypt ? thanks ,
-
Windows 7 64 bit won't run any .exe starting with VM*
In my Windows 7 Professional 64 bit machine, executable whose name starting with "VM" is getting terminated after starting the process. For eg: vmd.exe, vmtest.exe etc will be forcefully terminated once it is started its execution. But if I rename t
-
Can't preview my ibook on my iPad!
Hi, I'm working on iBooks Author and I need to test my book to see how it looks like, before proceeding even more with writing. What I did: 1- I downloaded iBooks on my iPad. 2- I connected it to my Macbook pro, using Mountain Lion 10.8.1 3- I clicke
-
Missing first typed letter in OSX 10.8.5
Having searched I see that a lot of people had this problem a few years ago on PowerBooks. I am on a Mac Pro: We have 2x artworking machines, both 3.33 Ghz 6-core Mac Pro towers (not the tubes). We have recently upgraded both of them to 10.8.5 from 1
-
Okay, these three classes are.. well.. basically non-existant, so I feel no reservations at posting them here. Please, someone, have a look and tell me why I'm getting an error in the child class. I'll post more further down. CLASS ONE import cs1.Key