Create User in SRM 7.0 with EP

Hi experts
i'd like to know how is called now the transaction in order to create User in SRM 7.0 via EP
regards
andrea

Hi,
If you logon as administrator, you see WebDynpro UI for creating user.
Regards,
Masa

Similar Messages

Unable to created users through UME on portal with AS ABAP as its data sorc

Hi,
Unable to created users through UME on portal with AS ABAP as its data source.
I have assigned SAP_BC_JSF_COMMUNICATION to the user SAPJSF but this only helps in editing the already existing users but not in creating new users on portal.
I have checked that that the role SAP_BC_JSF_COMMUNICATION is properly generated and has * in all authorizations. I have even assigned SAP_ALL and SAP_NEW to SAPJSF and another ID.
DO we need to make any config changes to make the database writable from portal. Please advise.
Thanks,

Hi,
If your system is a AS ABAP + +JAVA System,, you have to do the following
1. Login to Client 001 using SAP GUI
2. Create a user id
3. Login to portal and you will be able to see the user.
4.Assign him the portal rights
If you want the portal to use seperate Database for USers, there is a setting in Visual admin, that you can change for the same, but i dont remember that

Create user menus in hierarical tree with access control

Hi All,
I am facing problem in populating user menus in hirarical against user access control.
I have table of menus in which i populate data as:
Menu
- Sub Menu 1
-- Form 1
-- Form 2
-- Form 3
- Sub Menu 2
-- Form 4
-- Form 5
-- Form 6
Now I have created hierarical query as:
SELECT -1, LEVEL, menu_name, NULL, id
FROM menu_opt
START WITH parent_id IS NULL
CONNECT BY PRIOR menu_id = parent_id
and menu_id in
(3, 4);
Note: where menu_id 3 = Form 1, Menu_id 4 = Form 2.
If I allow only menu ID 3 and 4 (not parents menus) then Hierarchy should be completed from top to bottom. What change i have to made to achieve my target?
Thankx
Qasim Javaid

Hi,
Sorry, it's very unclear what you want to do.
Whenever you have a problem, please post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that sample data.
Say which version of Oracle you're using, e.g. 11.2.0.2.0. This is always important, but especially so with CONNECT BY queries, because every version since Oracle 7 has had significant improvements in this area.
See the forum FAQ {message:id=9360002}
If you can show the problem using commonly available tables (such as scott.emp or hr.employees, both of which contain trees) then you don't need to post any sample data; just the results you want and an explanation of how you get those results.
For example, I think you're asking something like this:
"I want to show the hierarchy in scott.emp, but I only want to show certain nodes and their descendants. For example, if I ask for 'MILLER' and 'SCOTT', I would want to see
{code}
` EMPNO ENAME
7876 ADAMS
7788 SCOTT
7934 MILLER
{code}
(order doesn't matter). ADAMS is included because ADAMS is a child of SCOTT."
Here's one way to do that:
SELECT DISTINCT
     empno, ename
FROM     scott.emp
START WITH     ename     IN ('MILLER', 'SCOTT')
CONNECT BY     mgr     = PRIOR empno
;This query should work in any version of Oracle.

Create User for Target (Terminal Adapter) with private key authentication through web service

Hi
I have a question about Terminal adapter.
My current aim is to create process "Execute script through ssh on remote Linux system" with input parameters ( login, path to private key, path to script)
It was very helpful to find this discussion https://supportforums.cisco.com/message/3543289#3543289 .
Is there a way to create Public-key Authenticated Admin Runtime User with private key for authentication by using NB webservice ?

I will second Shaun's comment...
Unfortunately, it looks like this is not possible in 2.3.X. (That is you can create the user but the fields you need to use to configure that user properly do not appear to be exposed to the Northbound Web Service).
It looks like something that will be fixed in a future release of Process Orchestrator.
Svetlana

OIM 9.1.0.1 :- Create User Operation with Approval.

Guru/Experts,
I am currently using OIM 9.1.0.1 , and i want create user functionality to be work with approval. Whenvr a user Or xelsysadm tries to create user then its should ask for approve/Rejact then only it will create or reject the operation.
Thanks,
Hemant.

user8995781,
Thanks for your reply , but i am not able to create a user. I am getting illegalArgumentException. My Approval process is triggering properly but i am not able to see provision process triggering properly.
Please find below log :-
13:24:07,457 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:07,478 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:07,481 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:07,616 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:24:09,285 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
13:26:09,387 ERROR [REQUESTS] Class/Method: tcRequestOperationsBean/getRequestDetail encounter some problems: Error while executing query to get request information.
13:26:09,388 ERROR [REQUESTS] Class/Method: tcRequestOperationsBean/getRequestDetail encounter some problems: {1}
java.lang.IllegalArgumentException
at java.sql.Date.valueOf(Date.java:138)
at com.thortech.xl.ejb.beansimpl.tcRequestOperationsBean.getRequestDetail(Unknown Source)
at com.thortech.xl.ejb.beans.tcRequestOperationsSession.getRequestDetail(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy767.getRequestDetail(Unknown Source)
at Thor.API.Operations.tcRequestOperationsClient.getRequestDetail(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy786.getRequestDetail(Unknown Source)
at com.thortech.xl.webclient.actions.RequestAction.setPendingTask(Unknown Source)
at com.thortech.xl.webclient.actions.RequestAction.requestDetail(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
at java.lang.Thread.run(Thread.java:662)
Thanks,
Hemant.

"The CREATE USER statement must be the only statement in the batch" in SQL Azure - why? what to do?

I'm getting an error on a line in the middle of a larger sql script, only in SQL Azure.
IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'foouser')
CREATE USER [foouser] FOR LOGIN [foouser] WITH DEFAULT_SCHEMA=[dbo]
GO
Error: "The CREATE USER statement must be the only statement in the batch."
I don't actually understand what 'the only statement in the batch' means.
What is a batch? Is it a SQL file? Is it related to a 'GO' statement or an 'IF' statement? What is the reason for the error? And how do I avoid it?
Thanks,
Tim

>IF...ELSE imposes conditions on the execution of a Transact-SQL statement
I understand the general purpose of an If statement. I could let go of our definition of statement counting disagreeing too except that because of the error I'm stuck.
It's less important for Create User but what I am really puzzled over now is a very similar issue how am I supposed to do a safe version of CREATE LOGIN, when I don't know whether a login has been previously created on the server or whether I
am setting up the database on a clean server?
IF NOT EXISTS (SELECT * FROM sys.server_principals WHERE name = N'foouser')
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
If I try and execute this script, it throws the same error as above.
The first unworkable workaround idea is to omit the if statement
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
But if the login already exists on the server (because a similar script was already run), then the script throws an error.
The second unworkable workaround idea is to do
DROP LOGIN [foouser]
GO
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
Obviously this throws an error in the second block if the login doesn't already exist on the server.
The third workaround idea I have is to go conditional by putting an IF condition around DROP instead of CREATE:
Unfortunately that doesn't work for me either!
"The DROP LOGIN statement must be the only statement in the batch"
(This is despite the fact that 'drop login' is listed on the
supported commands page, not the partially supported page..?! Which disagrees with the notes on
this page.)
Anyway the real question I am interesting in addressing is: is there actually a way to have a 'Create/Delete login
if exists' operation which is SQL-Azure compatible and doesn't throw me error messages (which messes with the sql execution tool I am using)?
If there is no way, I would like to believe it's because it would be a bad idea to do this. But in that case why is it a bad idea?
Tim

Not able to create users in OID through OIM

HI,
I am creating users in OIM and provisioning them to OID. The create user is working fine but provisioning is not working.
The create user task is getting rejected with error message as :
Response: Target Unavailable Error
Response Description: Target server not available
In the weblogic console its showing error as:
INFO,24 Feb 2010 18:42:13,140,[XL_INTG.OID], Parameter Variables passed into co
m.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S): are
sContainerDN = ou=AGI(ENI UK Ltd),o=Shippers,dc=xoserve-apps,dc=com, sFirstName
= testuser17, sLastName = testuser17, sUserDNParam = TESTUSER17,
INFO,24 Feb 2010 18:42:13,156,[XL_INTG.OID],com.thortech.xl.integration.OID.uti
l.tcUtilLDAPOperations : connectToAvailableOID() : SSL option is not selected in
ITResource
ERROR,24 Feb 2010 18:42:16,156,[XL_INTG.OID],===================================
=================
ERROR,24 Feb 2010 18:42:16,156,[XL_INTG.OID], ERROR in OID:connectToAvailableOID
() CommunicationExceptionUnable to create Initial LDAP Context
ERROR,24 Feb 2010 18:42:16,156,[XL_INTG.OID],===================================
=================
ERROR,24 Feb 2010 18:42:16,156,[XL_INTG.OID],===================================
=================
ERROR,24 Feb 2010 18:42:16,156,[XL_INTG.OID],10.224.29.51:389
ERROR,24 Feb 2010 18:42:16,156,[XL_INTG.OID],===================================
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID],com.thortech.xl.integration.OID.uti
l.tcUtilLDAPOperations : disconnectFromLDAP() : : Unable to close LDAP Context.
The context was probably not created, since it is null
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID],===================================
=================
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID],===================================
=================
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID], ERROR in com.thortech.xl.integrati
on.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) NoInitialContextExceptionEr
ror while connecting to target
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID],===================================
=================
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID],===================================
=================
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID],com.thortech.xl.integration.OID.uti
l.tcUtilLDAPOperations: Unable to close LDAP Context. The context was probably n
ot created, since it is null
ERROR,24 Feb 2010 18:42:16,171,[XL_INTG.OID],===================================
=================
Please help.
Thanks in advance.

Thank a zillion to both of you...
It was connection problem. Somebody changed my OID's IP address.
Now my users are getting provisioned.
One more doubt how to give points to both of you. I dont know how to give points in this forum.

SRM: Create Contact Person Could not create user; contact your system admin

Hi All,
First, I am not sure this question should be posted here, or SRM General. From my point of view, here is more suitable.
Our Problem:
Activity "Create Contact Person With Reference" error with message:
Step to reproduce:
1. Login to SRM JAVA as super administrator
2. Open tab "SRM Administration"
3. Using the current query, search for Business-Partner no: 30000725
4. Press "Create Contact Person with Reference"
5. Fill all required fields, tick "Is contact person" checkbox
6. Put: /SAPSRM/SUPPLIER as Role
7. Save
The following Message appear:
Could not create user; contact your system administrator
SPML Service error: Error reading request status. Display Help
Contact Person 2000000214 Created Successfully for BP 30000725 Display Help
E-mail was sent
The first error is intriguing. The username & password is created successfully in ABAP System (Our UME is in ABAP).
QUESTIONS:
1. What cause this problem? How to trace the error?
2. We want the user have portal role automatically. How to achieve that?
Thank you for any responses and helps.
SRM ABAP Version:
SRM_PLUS     700     0009     SAPKIBK209     SRM_PLUS for mySAP SRM
SRM_SERVER     700     0009     SAPKIBKV09     SRM_SERVER
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SRM JAVA Version:
SRM JAVA: Release 7 SP Level 9.0
BP SRM: Release 7 SP Level 9.0
Edited by: Nur Agus Suryoko on Mar 11, 2011 11:36 AM
Version information added

Hi Fernando,
Can you please tell me how you resolved this issue ??
Regards,
Adren

Create and assign new user in SRM org struct when HR Distribution is active

Hello experts,
In SRM HR Distribution list is active.
Now requirement is we want to create new user in SRM and assign it with the SRM Org structure.
1.)Do i need to create a user in SRM and in ECC HR i mean in both the system or in ECC-HR only.?
2.)When user is there in ECC-HR system then how i can assign user to SRM Org structure. Is there any FM or Standarrd Program ?
Thanks!!
Sunny

Hello Sunny,
As you mentioned HR distribution is active hence you need to create the user in ECC environment and assign it to the org. structure in ECC.
Again there would be few user which you would create in SRM evironment and those would be administator specific.
Activating pointers for HRMD_ABA message allows to replicate all changes made to the organizational structure in HR to SRM.
Changes in HR structure include modifications (add/modify/delete) in the following:
u2022 Organizations
u2022 Jobs
u2022 Positions
u2022 Employees
A change in the relationship of any of the elements above will also be replicated to SRM. For instance, an employee changing units will be reflected in SRM.
Pre-requisite: SU01D ID should exist prior to replicating the concerned user in SRM.
Thanks,
Yatin

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH!

Is it possible to create a playlist and share it with another itunes user?

Is it possible to create a playlist and share it with another itunes user?

try this out
Select distinct
v_R_System.Netbios_Name0 AS [Computer Name],
v_GS_COMPUTER_SYSTEM.UserName0 AS [User Name]
from v_R_System
left join v_GS_COMPUTER_SYSTEM on (v_GS_COMPUTER_SYSTEM.ResourceID = v_R_System.ResourceID)
inner join v_fullcollectionmembership as b on (b.ResourceID = v_R_System.ResourceID)
left join v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP ON v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID = v_R_System.ResourceID
inner join v_GS_SYSTEM e on e.resourceid = b.resourceid
Where
b.CollectionID = @collectionid
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

How Do I Create User Account with "limited admin rights"?

Hello;
I would like to give a handful of users the ability to login to the DCC and enable them to add/delete/modify users and or hosts only, I.e. People and/or hosts.
Is there anyway to:
1. Make a user with this admin capability?
2. Segregate the containers they are able to modify?
Thanks to all in advance.

BobM53, That would be needed regardless of what front end my users log in with, in my case I was looking for them to access the DIT via the DSCC/DCC, which is not possible. Regardless, thank you for your reply, it is reassuring to know I am headed in the right direction.
I am now looking towards installing something else like Apache Directory Studio, or some other GUI for users to manage the directory.
I will most likely create one or more ACI's to build groups, adding members to those groups as needed; each group being allowed to perform functions such as create users, lockout users, add/modify hosts, etc.
I will most likely follow the steps outlined in:
Directory Server Groups, Roles, and CoS - 11g Release 1 (11.1.1.7.0)
Slightly OT, does anyone have a suitable and similar proven method to "lockdown" root accounts, and who has root access?
Thank you

What the best way to create User defined table with ADDON purpose

Hi folks, how are you ?
I´m beginner in development to business one, and I m studying to develop ISV addons.
But, during my exercises and analisys, I learned that have two ways to create tables and fields in business one. One way is throght by wizard in business one using Tools Menu > Configuration Tools > User Defined Tables >
Obs: I ´m using Business One Patch Level 9.
Other way, is create the tables and fields using DI API
But, my question is. When I develop one addon, or one UDO form that uses one set of user defined tables or used defined fields that where created by the first way (by wizard in B1), how I deploy this in other business one installation ? The package process will ensure the creation of this tables in another enviroment or I must implement the creation of user defined tables using DI API so that this code is called during the installation?
If in cases of addon develop I must use DI API to create user defined tables, How can I use my classes with this responsibility in package process ?
Thanks my friends.

Hi Renan,
You just need to put your logic in to the startup of your application, after you've established your connection to the UI API and DI API. All this will be triggered in the constructor of your main class.
namespace MyNamespace
public class MyAddon
bool runAddon = true;
bool initialised = false;
const string ADDON_NAME = "My Addon";
public static void Main()
        MyAddon addOn = new MyAddon();
        if(runAddon)
              System.Windows.Forms.Application.Run();
        else
         Application.Exit();
public MyAddon()
        // Connect to SBO session for UI
        if(!SetApplication()) runAddon = false;
private bool SetApplication()
        // Code goes in here to establish UI API and DI API connections
        // See SDK samples for examples
        // You should also define and filter the UI API events your addon will trap at this stage and create any menus
        // Call your routine to check if the required UDFs/UDTs exist on this company
        initialised = CheckInitialisation();
        if (!initialised)
           // AddOn not yet intialised on this company so prompt the user to run the intialisation process
          int iResponse = app.MessageBox("The " + ADDON_NAME + " addon will now create all required fields and tables."
                                         + System.Environment.NewLine + System.Environment.NewLine
                                         + "WARNING: It is strongly recommended that all other users are logged out of this company "
                                         + "before running this process. Are you sure you wish to continue?", 2, "Yes", "No", "");
          if (iResponse == 1) initialised = InitialiseAddOn(); // Call your routine to create the objects
        return true;
Kind Regards,
Owen

Create User in SRM 7.0 with EP

Similar Messages

Maybe you are looking for