Create Warehouse Request for Inbound Delivery Notification

Dear Experts,
I have created Inbound Delivery in  ECC and Inbound Delivery Notification has been created in SAP EWM.
Kindly suggest me how and where can I create Warehouse Request for Inbound Delivery Notification.
I donot see any transaction or link to create Warehouse Request for the Inbound Delivery.
I am new to EWM.  Please suggest.
Regards,
Shetty

Hi,
After the Inbound delivery has been distributed to the EWM environment the Inbound delivery notification (IDN) is created. So far so good but after the IDN has been created you will have to activate it manually if it didn't automatically. In order to activate it please go to transaction /n/SCWM/IDN - Maintain Inbound Delivery Notification and execute it for all of the IDNs that are not activated. Then you activate it and it creates the ID.
After the ID has been created, if the system (Post Processing Framework) didn't create the tasks relevant for receipt than you have to go into the ID and choose Inbound Delivery - Follow-On Functions - Warehouse Tasks and create and save the warehouse tasks relevant for receipt.
All the best,
Claudiu Maxim

Similar Messages

  • Create an output for Inbound Delivery

    Hello,
    How do I generate an output (print output or IDoc) when an Inbound Delivery is created in my ECC system using Output Control?
    I need an output to be generated when Inbound Delivery is created/ changed/ deleted.
    What are the standard configurations available to achieve this?
    Thanks and Regards,
    Ashwin Bhat

    Hi,
    Go thru these links:
    [Maintain Output Determination for Inbound Deliveries|http://help.sap.com/saphelp_470/helpdata/en/6f/c5a3f28d7711d5b2c80050dadf6bf7/content.htm]
    [Assigning Output Determination Procedures|http://help.sap.com/saphelp_crm60/helpdata/en/9d/af3e429bc2aa04e10000000a1550b0/content.htm]
    Hope this helps!
    Reetesh

  • BDC program for inbound delivery VL31

    Dear experts,
    I have created BDC program for inbound delivery with old T_CODE VL31,but it's very inefficient.Now I must change the program for the efficiency improve.
    Could you give any idea?
    Thanks in advance,
    collysun.

    I'm sorry, but it does not seem that there is a BAPI for this (looking at transaction BAPI and business object BUS2015).
    Have you perhaps looked at the new transaction VL31N? Are there any differences that may improve the input (limit the number of BDC steps)?
    Otherwise, take a look at the way you are entering data now. Make sure there are not too many dialog steps. i.e. Make sure you enter all the data you can on a single screen, only then process the next OKCODE. Also, look at the transaction again: Perhaps you can enter items in an overview screen instead of individual items. (I have no knowledge of your situation of course; these are just some general guidelines).
    Cheers,
    Martin

  • Bapi for inbound delivery using PO

    Hi experts,
    I want to create a bapi for inbound delivery using PO.
    which bapi or FM should i use and can you send me the code for that.
    Thanks,
    Rajiv

    Hi Rajiv,
    Please check this FM --> BAPI_DELIVERYPROCESSING_EXEC
    Please check these threads
    Bapi to create inbound delivery
    BAPI to create inbound delivery
    Hope this would help you.
    Good luck
    Narin

  • Error while activating Inbound Delivery Notification

    Hi,
    I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
    However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
    For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
    What's missing?
    I help will be rewarded.
    Thanks,
    Amit

    Thanks Virendra,
    You have pointed to the right direction. Basically, without checking for the posts here, which are really helpful, I went to system one more time only to find that I have made a configuration error. I am just sharing if anyone else in future faces same situation, he/she can be benefited out of it.
    In EWM system - I had created number range with transaction SNRO for object /SCWM/SSCC putting 01 (from 1 - 1999999) as internal and 02 (from 2000000 - 2999999) as external number range.
    In EWM system - I had assigned the number range in following place:
    Extended Warehouse Management > Cross Process Settings > Handling Units > External Identification > SSCC Generation Acc. to EAN128 > Maintain SSCC Generation for Each Warehouse Number
    In ERP system - I had created number range with SNRO for object LE_SSCC with same attributes as above. i.e. 01 as internal and 02 as external.
    Now when I packed the inbound delivery in ERP system, I used packaging material for which the number range is internal (i.e. 01) and it created HU with SSCC number. Up to this all were good. But when the same HU transferred from ERP to EWM system, SAP treated the HU number coming from ERP system as external HU number (which is logical) but it was looking at number range 02 (since it was marked as external) but was failing to match as the allowed numbers doesn't fit  along with the number transferred from ERP system. Hence it was giving error.
    As a solution I declared 01 as external and 02 as internal and also inverted the number range assignment for SSCC generation in EWM system.
    It created Inbound Delivery successfully.
    Thanks all of you for helping on it.
    Cheers,
    Amit

  • Goods Receipt for Inbound Delivery before Transfer Order

    Hello Experts,
    Below is the normal process in case of GR via inbound delivery.
    PO -> Inbound Delivery -> TO -> Confirm TO -> Post Goods Receipt in Delivery.
    My client wants as per the normal Purchase Order cycle as below.
    PO -> Inbound Delivery -> Post goods receipt in Delivery -> TO - > Confirm TO.
    I have found some config for this as per below path.
    Logistics - General -> Handling Unit Management -> Basics -> Delivery -> Define Sequence of Transfer Order - Goods Receipt.
    I have done these settings but still it is not working.
    I have couple of questions here.
    1. Are there some more settings required?
    2. Why SAP has designed this process in such a way for inbound delivery.
    Thanks in advance for your help.
    Navin

    Hi,
    I am working with non HU managed storage location. Can I still use this settings & process for inbound delivery?
    I am stuck with one more question. SAP is not allowing me to create Inbound delivery for QM active materials.
    The message it is saying is ....
    Material CH-1440 1000 cannot be used in inbound delivery because QM is active
    Message no. L9528
    Diagnosis
    QM is active for material CH-1440 in plant 1000. As a result, the material cannot be used in an inbound delivery item because the item is relevant for picking and because WM is active for the item.
    This process is not supported in the current release.
    Procedure
    Execute the putaway using a goods receipt posting with subsequent
    putaway in the Warehouse Management system.
    Can you please help me with this one also?

  • Inbound delivery notification in scm

    hi all,
    i have created in bound delivery in ecc 6.0 , maintain integration model for the same for data transfer between sap erp and scm. how to create inbound delivery notification based on  the inbound delivery received from sap erp.
    kindly guide me out for creation of inbound delivery.
    Regards,
    velu

    Hi,
    You need to map the delivery types and item categories first.
    Regards,
    MdZ

  • During PGI for inbound delivery it is giving an error message in ECC6.0

    I am getting an error message  during processing a serialized production order through one custom transaction. In that program FM BAPI_GOODSMVT_CREATE is used to create inbound delivery . After the inbound delivery is created it is giving  error messages
    'System status ESTO is Active (EQUXXXXXX)'
    'Check the status of the Serial Number XXXXXXX'
    'Serial Number cannot be used here'
    'Termination of goods issue posting of delivery item XXXXX'
    and it does not create the PGI for the delivery.
    I have done the same steps in 4.7 system but did not get any error and posting of goods issue has also done successfully but in ECC6.0 system I am getting this error from BAPI_GOODSMVT_CREATE.
    If anyone have faced this issue in ECC6.0 then please help.....

    ESTO means "in the warehouse".  Looks like you may be trying to receive a serial no. you already have received?

  • SAP System inconsistency for Inbound delivery / MIGO and a "sap note"

    Hello Friends ,
    After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
    the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
    for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
    - Inbound delivery storage location cannot be changed to here Message no. VLA316
    the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
    also another error  like
    - Inbound delivery batch cannot be changed to *** here
    which doesn't make any sense because there is not batches in the inbound document !!
    i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound  indicator  at the shipping parameter at client level customization
    i need help on  how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situation

    Hi,
       The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note:  1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
       If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • New Condition TAble for Inbound Delivery

    Hello
    i want to maintain a new Condition table for the Inbound delivery picking with the combination of _Delivery type/Plant
    so that the Inbound created for the particular plant alone uses the particular output type.
    Where in IMG can i configure the new Condition table for this combination for the Inbound delivery ?

    Hi,
    Go to SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Inbound Deliveries > Here perform following;
    - Define Condition Table for Inbound Delivery
    - Define Output Types for Inbound Delivery
    - Define Access Sequence for Inbound Delivery
    - Maintain Output Determination Procedure
    - Assign Output Determination Procedures

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Creation of Transfer Order for Inbound Delivery

    Hi,
    I am using L_TO_CREATE_DN for creation of a TO for Inbound Delivery.
    I am getting this message."""Item 180000166 000010 does not exist or is not relevant for picking"""
    The delivery is having Ware House number so i think it is relevent for picking... It is having an item 10 also. I dont know why this message is coming.
    Can anyone please let me know how to get rid of this error and create a TO for the inbound delivery.
    Regards
    Rakesh

    Hi Rakesh,
        Pad the delivery number with a 0 in front and check.
    like, instead of 180000166, pass 0180000166.
    Regards,
    Ravi

  • Function Module / BAPI for Inbound Delivery from Purchase Order

    Hi,
    I need to create an inbound delivery from Purchase Order items and am looking out for some Function Module or BAPI for the same.
    The requirement is that i should be able to specify selected line items from PO for delivery.
    I tried the BDC method for VL31N , but the particular item selection is problem, since by default it shows all the items of PO and i want only selected items.
    Do reply.
    Thanks in advance.

    check these and their documentations.
    BAPI_INB_DELIVERY_CHANGE       Change inbound delivery
    BAPI_INB_DELIVERY_CONFIRM_DEC  BAPI for inbound delivery verification from a decentralized system
    BAPI_INB_DELIVERY_SAVEREPLICA  BAPI Function Module for Replication of Inbound Deliveries
    Regards
    Prabhu

  • Transfer Order for Inbound delivery with multiple line items...

    Hi All,
    <The flow of my report pgm is >
    PO creation using Transaction - me21n
    My report pick the PO created as per date given in selection screen-
    Creates outbound Deliveries using BAPI_OUTB_DELIVERY_CREATE_STO
    Create Transfer order FM L_TO_CREATE_DN
    Confirm Transfer order FM L_TO_CONFIRM
    GI is done - Inbound delivery is created
    Create Transfer order FM L_TO_CREATE_DN for Inbound delivery
    Confirm Transfer order FM L_TO_CONFIRM
    Goods receipt.
    If PO is having one item - the entire flow is working perfectly.
    if my PO is having multiple items,
    While creating TO for inbound deliveeies - i am facing the error.
    Before calling FM,
    I am assigining these values like
    wa_delit-nlpla  = wa_ltap_vb-vlpla.    "Source Storage Bin To Destination Bin
          wa_delit-nltyp  = wa_ltap_vb-vltyp.    "Source Storage Type To Destination Storage type
          wa_delit-anfme  = wa_ltap_vb-nsolm.    "Actual destination quantity
          wa_delit-letyp  = wa_ltap_vb-letyp.    "Storage Unit Type
          wa_delit-altme  = wa_ltap_vb-meins.    "Unit of measure
          LOOP AT i_lips INTO wa_lips WHERE vbeln = WA_VBFA-IN_DELIV.
            wa_delit-posnr =  wa_lips-posnr.
            APPEND wa_delit TO it_delit.
             ENDLOOP.
    As i am appending i am getting 2 line items in the tabke it_delit.
    Function module :
    CALL FUNCTION 'L_TO_CREATE_DN'
      EXPORTING
       i_lgnum                         = l_lgnum
       i_vbeln                         = wa_vbfa-in_deliv
       i_commit_work                   = 'X'
       i_bname                         = sy-uname
       it_delit                        = it_delit
    IMPORTING
       e_tanum                         = gv_tonum_1
    TABLES
       t_ltap_vb                       = i_ltap_vb_1
      EXCEPTIONS
       foreign_lock                     = 1
       dn_completed                     = 2
       partial_delivery_forbidden       = 3
       xfeld_wrong                      = 4
       ldest_wrong                      = 5
       drukz_wrong                      = 6
       dn_wrong                         = 7
       squit_forbidden                  = 8
       no_to_created                    = 9
       teilk_wrong                      = 10
       update_without_commit            = 11
       no_authority                     = 12
       no_picking_allowed               = 13
       dn_hu_not_choosable              = 14
       input_error                      = 15
       error_message = 16
       OTHERS = 32.
    Here i am getting as input error, i need to create only one TO for multplie items
    If i pass this i a loop - then it will create 2 Transfer order which is WRONG ...so please help me to over come this error.
    Thanks
    Senthil
    Edited by: Senthil Kumar on Dec 7, 2009 3:29 PM

    Hi,
    Please check FM L_TO_CREATE_MULTIPLE.
    Regards,
    Ferry Lianto

  • Mandatory fields for inbound delivery idocs

    hi all
    i want to generate inbound idocs for inbound delivery ASN
    i am using message type DESADV and idoc type /AFS/DELVRY03
    in order to generate inbound idoc what are mandatory values i have to pass to the idocs
    thanks
    Anil

    HI,
    I created inbound idoc for ASN Inbound delivery in test mode we19
    i got idoc with status 62, when i am trying to process the idoc in bd87, its allowing me
    is there any other way to process the idocs , so that status will be 53
    thanks

Maybe you are looking for