Create webdynpro navigation iview in the Homepage on the ESS portal

I am trying to create a webdynpro navigation iview in the ESS portal.  I haven't created a workarea navigation iview in 2 or 3 years. However, I think there was a a template in there called 'Webdynpro Navigation iView'. 
Some of the parameters that are on those navigation iviewws are Application Name, Appication Parameters(it contained
info like -> sap.xss.menuarea=ZWTAREA&sap.xss.menuargrp=ZSAPDEFAULTESS&sap.xss.menuhdr=SAPDEFAULT). 
I would be grateful if someone could tell me how to create this kind of an iview.
Thanks,
Mike

Hi Mahesh,
We are Adding Travel Management to 3 of our roles.  The out of the box ESS Travel Management application works fine. However, we need to add it 3 types of employees.  Based on the type of employee we want them exclude some of the services.  I created 3 area's in spro.  I am just trying to get one of them to work right now.  To get one of the areas to work, I've done the following things.
1) I created iview Travel Management NT Nav .  I created it using the parfile thing and selected WebDynproIntegrator.  The iview looks a little different that the Working Time Nav(This is one that we created for Working Time about 3 years ago. It works.).
2) I created a proxy Web page under the page folder
3) I linked the page and the iview together.
4) I created the resource ZTRAREAN in spro
5) I created the area ZTRAREAN in spro and set it's link to resource ZTRAREAN.
6) I assigned 3 SAP Travel Management subarea's to my area ZTRAREAN.
My goal is to get some of the sub areas linked to my new area.  After that I will look at creating my own subheadings which will exclude some of the services that are in out of the box Time Management sub area's.
Thanks,
Mike

Similar Messages

  • How can I change the homepage for the tabs?

    A while ago, i downloaded, by mistake, a program called Babylon and since then every time I open a tab, google by Babylon showes up. It is very annoying and I cannot find a way to change it. Can you please help me change the homepage for the tabs?

    If those sites are bookmarked then try this extension:
    *Bookmark Favicon Changer: https://addons.mozilla.org/firefox/addon/bookmark-favicon-changer/

  • Creating "Back" Navigation in a Branching Project Without the Playbar or a TOC?

    Hello,
    I've been struggling with accomplishing a very simple goal: in my Captivate project, I want there to be a "Back" button on every single slide that sends the user back one slide based on their navigation history throughout the slide.  The playbar must be disabled, and I don't want the user to have to deal with a Table of Contents.
    Because this is a somewhat complex branching project, using the "go to previous slide" selection for a button will not work -- this simply sends the user one slide back in the filmstrip, and that might not be where I want them to go.
    Using the "go to last slide viewed" selection for a button also will not work.  This creates an infinite loop in which once the user clicks the "Back" button on one slide, they will go to the previously viewed slide, but when they click it again, they will return to the original slide.  For example, repeatedly clicking this Back button will send the user from slide 2 to slide 1, then slide 1 to slide 2, then slide 2 to slide 1....etc.
    Basically, all I want is an internet browser-style back button within my project.  I figure this is a fairly common thing that project creators want to do, so I checked for any available widgets that might offer the desired functionality, but I've come up with nothing.
    It would seem as if my only hope lies in two potential places: either the execute Javascript selection for buttons, or Advanced Actions.
    Before I dig too deeply there, I was wondering if anyone had a simple solution for this very basic problem.  I've looked around the forums, and this particular thread looks very relevant: http://forums.adobe.com/message/4575291#4575291 .  In that thread, it looks like the original poster just decided to create a separate swf for each of the linear branches of their project.  For my project, this would be a most inelegant and clutttered solution.
    Anyone have any ideas?  If I must use Advanced Actions / variable creation, could you point me in the right direction?  I'm on Captivate 5, by the way.  Thanks.

    Indeed this issue has come up several times over the years, because some authors would like Captivate content to work in much the same way that other web-based content playing in a browser does.  When users see content in a browser, they expect there will be a Back button that takes them to the last-visited slide. If they just keep clicking that Back button, they expect it will retrace their path through the content.
    What happens under the hood in the browser is that it stores all the URLs that the user visited in an array of sequential values, which allows the browser to retrace the user's path.
    Captivate currently has no built-in array facility available to authors for this purpose.  Captivate variables can only store one value.  Advanced Actions are not powerful or flexible enough to build the kind of programmatic loops that would allow you to traverse a series of variables to try and duplicate typical Back button functionality.
    It might be possible to do all of this using some fancy JavaScript coding, but you (or someone that owes you a favour) would need decent coding skills to pull it off.
    I think it would be great to log an enhancement request with Adobe for a couple of Advanced Actions to be added for this need.  Perhaps we could call them Go Back History -1 and Go Forward History +1.  These would just reference an internal array somewhere in the bowels of Cp where the History is kept.  Then all authors would need to do is choose this as a button action or an action in a conditional advanced action of some kind.

  • I created webdynpro view then i want to export to sap portals using SLD CON

    hi
    every body
    i created WebDynpro views in NetWeaver dev studio
    then i want to export to sap portals i have to use
    SLED CONFIGURATION what are all step required can
    post to me and aloes step to configure in visual administrator and JCo connections
    bee

    hi
    check out this weblog for SLD configuration
    /people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
    or
    Do the following
    SLD (System Landscape Directory) CONFIGURATION on J2EE Server.
    http://host:j2ee_port/sld
    Enter Administrator user name and password.
    Go to Administration -> Server Settings
    Make sure that the SLD server is stopped
    Enter the following Server Parameters
    Object Server:
    <Host name of the J2EE server>
    Working Directory:
    The working directory of the System Landscape Directory.
    The standard path is "/usr/sap/<SAPSID>/SYS/global/sld"
    Click on SET.
    Select the following parameter for Persistence
    Persistence: Database
    Click on SET.
    Leave ABAP Connection Parameters Blank.
    Go back to Administration.
    Click on Data Supplier Bridge
    Configure the data supplier bridge with following parameters.
    Update local SLD (sld/active): TRUE
    RFC Gateway:
    Server : <host name of J2EE server>
    Service : <The SAP gateway service port>
    Click on SET.
    Open Administration Tool for J2EE server from following Location.
    C:\usr\sap\<SID>\JC<instance number>\j2ee\admin\go.bat
    Select Default and Click on Connect.
    Enter password for Administrator.
    Click on Connect.
    Select Cluster->Server->Services->SLD Data Supplier
    Select http setting tab page and enter following details.
    Host: <host name of J2EE server>
    Port: <Port Number of J2Ee Server>
    User: <Administrator User>
    Password: <Password for Administrator User>
    Use https? : <Check this if you want to use https>
    Trust Store: <leave default i.e. TrustedCAs>
    Click on SAVE.
    Select RFC Settings tab page and enter following details.
    Gateway Host : <host name of J2EE server>
    Gateway Service/Port: sapgw<instance number>
    Click on SAVE.
    Restart the SLD data Supplier Service.
    After the SLD is configured.
    go to the path.
    http://<hostname>:50000/webdynpro/welcome.
    go to your application.
    click on the application. on the right hand side you can see you logical systems.
    create the JCO connection going through that steps.
    Deploy you application on to portal from NWDS and run your application.
    Regards,
    Gopi

  • On Sympatico homepage, my local weather and news does not come up unless I refresh the page. But when I return to the homepage during the same session, local news/weather is gone again. Is this correctable?

    When I first open the browser and it goes my homepage, Sympatico.ca, there are 2 areas of the homepage you can personalize. On the left hand side "News" Column, the bottom box "Local News" allows you to select a location (Toronto, Ontario Canada for me) to display news from that area. On the far right hand column, below the advertising bar, is "Weather" where you select your city (Brantford in my case) and it will display the 4 day forecast in C or F degrees. Once you close the homepage the settings are saved. The problem is that when I leave the homepage to any other website, if I return to the homepage the weather and local news is back to the default setting of having to select the city again. I did find if I just refreshed the page, the personalized settings appear. I have Firefox 4 and it seemed to correct the problem when I installed 4 as the same problem had been occurring with my previous version of Firefox. But now it's back to having to refresh the page to get the saved location for local weather and news. My wife uses IE8 on the same PC and has not had this problem on her Sympatico homepage.

    aha!
    Wed Feb 14 12:29:16 2007
    PUSH:
    Received control message:
    'PUSH_REPLY,
    route 192.168.100.3 255.255.255.255,
    route 192.168.1.0 255.255.255.0,
    route 192.168.3.0 255.255.255.0,
    route 172.16.0.0 255.255.0.0,
    route 10.123.123.0 255.255.255.0,
    redirect-gateway,
    dhcp-option DNS 172.16.70.12,
    dhcp-option WINS 172.16.70.2,
    dhcp-option DOMAIN timberline.int,
    route-gateway 172.16.70.254,
    ping 10,ping-restart 120,
    ifconfig 172.16.70.216 255.255.255.0'
    The ifconfig line the server is pushing is not right. That is meant for a point to point connection. That is why the local client is puking on it...it is not correct. At least for a tun type device. If it was a tap, then it would be fine.
    http://openvpn.net/man.html
    (look for "--ifconfig l rn" )
    so.... change the line to dev tap, and then do this stuff..
    http://wiki.archlinux.org/index.php/OpenVPN_Bridge

  • Pages allows reload when I try to go to them and always go back to the homepage of the site I am trying to view.

    When ever I open a new link that isn't the homepage of a site or type in a link, the page always reloads and I lose the content I was trying to view. Many times I have to hit stop so that the page will not reload and therefore the whole page doesn't get to load.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • How come twitter doesn't go to the homepage since the iOS 5 update?

    Ever since the ios5 update, I can't get on twitters homepage just the mobile page pulls up! Help!

    Are you using the Twitter App from the App Store, or accessing Twitter from Safari?  There is an App for Twitter.......

  • Changing the homepage of the c510 Zeen

    I want to change the homepage from my c510Zeen to an european version  I am not interrested in american temperatures or
    news

    Try now this: Go to Windows Start -> All Programs -> Accessories -> Right click on Command Prompt, select 'Run as administrator'. In the Command Prompt type:  cd c:\windows\syswow64 and press Enter. Next type this and then press Enter: regsvr32  jscript.dll Next type this and press Enter: regsvr32  jscript9.dll After each Enter you should receive a message saying that DllRegisterServer in XXX.dll succeeded. Reboot your computer. Make now the test showing if your Internet Explorer can execute JavaScript. Open in your Internet Explorer this page and watch the response: http://javatester.org/javascript.html

  • Fixing the homepage of the store

    Where the heck is the window for new songs based on what I've downloaded?
    I dont give a fableep about staff favorites or what's exclusively on Itunes, I'm more interested in having a panel that shows me the songs I! MEMEMEME! as the customer would be interested in.
    It keeps on showing up and dissappearing at random dates. AND I"M TIRED OF IT! I WANT TO SIT ON MY BUTT AT 11PM AND FIND THE MUSIC I WANT!

    We're just your fellow users here and have no idea why the "Just for you" feature keeps appearing and disappearing. Use the iTunes feedback page.

  • Error while selecting the Leave type in ESS portal

    Dear Team,
    One of the employee is trying to select a type of leave in ESS portal, system is giving error message as "Access is Denied" at the left hand corner of the screen. When i am checking it in Quality it is working fine.
    Can anybody suggest me on this.
    Kind Regards
    Nag

    Hi,
    Please check whether that emplloyee has got authorization for this function in production system. Thanking you.

  • Unable to access the Time Statements in ESS Portal

    The user is getting a critical error(com.sap.pcuigp.xssfpm.java.FPMRuntimeException) when trying to access his time statements from ESS portal. The user recently moved to a different country and trying to access statement there. Are there any country specific paramaters that are needed to be changed or set when a employee is reallocated?
    Please help me.

    Hi Rafi,
    We are also facing similar kind of issue.
    When i select type of leave as annual it is giving an error message as
    " Parameter  missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
    But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
    Please let us know how you have solved your issue?
    Thanks.
    -Suresh

  • CATS Screen dumps when navigating between prev and foll weeks in ESS portal

    The medical leave absence type MEDICAL LEAVE @1/2 PAY(13) is the only allowed by time administrators to enter through transaction CAT2 and not through ESS. Once entered,this appears in your time entry in ESS as a disabled entry. However once you navigate between the previous or the following weeks, after this entry appears in your screen, the screen dumps.
    SAP allows this functionality where time entries can be maintained for an employee through CAT2 on ERP side with an absence type not available in ESS portal.
    The following is the dump analysis from ST22.
    An exception occurred that is explained in detail below.                                      |
    The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
    caught in
    procedure "PROCESS_TIMESHEET" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    In the running program "CL_XSS_CAT_RFC_COMMAND_TOOLS==CP", part of a string was
    about to be accessed
    with an explicitly specified length.
    However, this length (4) exceeded the current length of the string
    (3).
    |    This kind of access is illegal. 
    Kindly suggest.

    The latest note released by SAP to solve this issue is 1559416 CATS WD: Dump if Attendance/Absence type is deactivated  .It works !

  • Firefox v28 will not launch yahoo and yahoo email often hangs. the problems started with v28, does not even load the homepage in the addr bar on startup.

    i set yahoo mail as a homepage.
    start firefox v28 and the screen goes blank, nothing shows in the addr bar and it just sits with
    the spinning green icon. no problems until i moved to v28. i often have issues with flash player
    hanging and created a dos bat file to kill it but that is not what seems to be happening with yahoo. pretty much everything else works. FF freezes but killing the plug in releases it. the newer versions
    of FF seem more flakey than the older ones. thanks for your help

    How do you kill the Flash player plugin using a BAT file -- are you killing an Adobe Flash exe or Firefox's plugin-container.exe?
    You can start up Firefox to a blank page using the Run box on the Start menu, with this:
    firefox.exe "about:blank"
    Hopefully that will at least get you in. Then, for Yahoo mail, make sure to access your mailbox through the Yahoo home page (or AT&T Yahoo home page, etc., as the case may be). And:
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens you can remove your Yahoo cookies individually.
    Then try reloading the page. Does that help?
    To rule out extensions as a possible culprit, could you try the site in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions, some advanced features, and some custom settings. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    * Help > Restart with Add-ons Disabled
    Note: Flash and other plugins still run
    After Firefox closes, a small dialog should appear: click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • I have Firefox 13.0. I have the homepage with the icons such as history, but I do not have the updated tabs.How do I get the updated tabs? Thanks.

    I have just updated to Firefox 13.0. I have the AVG Secure Search on my browser or whatever it is that is where the search engines and refresh, and bookmarks icons are located. Even though on my add ons page it says it is disabled. But obviously it isn't because it still works. I have removed AVG Secure Search from the list of search engines in the drop down list in the search bar, but this did not solve the problem with my tabs. The Firefox website says that my Firefox is up to date, but if it is up to date why do I still have the same old tab page when I open a new tab? When I click on the plus sign to get a new tab, it takes me to about:Tabs and says on the screen "You've opened a new tab." Then it has a search bar and a button next to it that says "Web Search!" Then it goes on to say "With Tabs You Can..." So, how do I change my current tabs to the updated Firefox tabs with icons of the my recent tabs and websites I regularly visit. Also can you please provide detailed step by step ways to solve this problem. Thanks.

    You only see items on the about:newtab page if the history is enabled and the browsing cache is working (stores thumbnails).
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    *http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox
    You can check the current cache usage on the about:cache page and in Tools > Options > Advanced > Network > Offline Storage.

  • Create navigation iviews to show differents documents from the same  folder

    Does any body knows how can i create navigations iviews that show differents documents from the same folder? This is my situation i have a folder that include documents for diferents countries, i want create a navigation iview that show only the documents for Canada from this folder.

    The only other option is to give user access using taxonomy. But it seems like a lot of extra work to keep documents in the same directory. anyway, here is the overview of steps:
    1. create index (SA > System Configuration > Knowledge Mgmnt > Index Administration)
    2. create categories within the taxonomy.
    3. define Query on each category. (Content Management > Classification > Taxonomy Query Builder)
    4. create property: property namespace, property group. (SA > System Configuration > Knowledge Mgmnt > Content Mgmnt > Global Services > Property Metadata)
    5. <b>assign props to the docs.</b>
    6. Schedule the crawler to create classification index.
    7. classify docs so that docs actually go recide in the categories
    <b>8. Create role, page and KM Navigation iViews for end user to browse the taxonomy instead of going directly to the repository.</b>
    9. restrict permissions on the taxonomy for different user groups.
    Kumar

Maybe you are looking for