Create webservice in ABAP

Dear All,
We have scenario in which we have SAP ECC 6.0 system with only ABAP stack.
We tried to create a webservice in SE80.
In transaction WSADMIN we are not able to Test or generate the WSDL.
We get the ICF_ERROR.
In the transaction WSADMIN Goto->Administration Settings, it asks for J2EE server.
But we don't have a Java engine installed.
So, my question is to create a webservice in ABAP, do we need the Java stack or Java engine to generate or test a WSDL.
Thanks.
best regards,
Thangesh

Hi Satyendra,
Thanks for your reply.
As you have said, in WSADMIN, it asks for J2EE server.
Does it mean that the Java stack (J2EE server) has to be installed as Add-in to the ABAP stack?
As of now, we haven't installed a Java stack.
Could you pls let me know whether it is a must to have a Java stack for testing a webservice or getting the WSDL url created in ABAP?
best regards,
Thangesh

Similar Messages

  • How to create  webservice  for  abap  RFC

    how to create  webservice  for  abap  RFC.......................
    plz any could tel me

    I'll answer my own question...
    In SE80 you create the Function Group and something called a Virtual End Point.  These are the only items that transport forward to you QA and eventually your production system.  Everything else has to be created in SOAMANAGER on the target systems. 
    In Development in SE80, when you create the Virtual End Point, this creates a corresponding entry visible in transaction SICF.  When you are done in SOAMANAGER, it creates three more entries in SICF.  The process of transporting the Virtual End Point does NOT create any entries in SICF in QA.  Don't let this be confusing.  In QA, SOAMANAGER will create all four SICF entries.
    Also, if you try to secure the web services using the S_SERVICE object, you must actually test the web service before you can add it to any roles.  This is because the USOBHASH table is not populated for the web service until you actually run the web service for the first time.

  • Create Webservice and deploy

    Dear Gurus,
    I had followed the below steps in creating webservices using ABAP.
    1. Create Package
    2. Create Function group
    3. Create RFC function module
    4. Create webservice from the function module
    5. Create service definition, select port profie and deploy service and assign to Package and transport request
    6. Executed SOAMANAGER transaction , it opens a webpage with internet explorer defaul web page and I dont see any SOA administration related information and I dont have any clue how to proceed further.
    Please let me know if I there is any prerequisities Like SP to be installed, or any configuration / settings needs to be done.
    I am workign in SAP ECC 6.0 (SAP version 700)
    Thanks in advance.
    Thanks
    Shanthi

    Hello,
    In Web Service hierarchy transaction SICF, node APPL_SOAP_MANAGEMENT should be active. The complete path is default_host/sap/bc/webdynpro/sap/APPL_SOAP_MANAGEMENT.
    Once you are in the SOA Management screen, select single service adminstration and select your service and create End Point there.
    Thanks,
    Venu

  • Create webservices and deploy

    Dear Gurus,
    I had followed the below steps in creating webservices using ABAP.
    1. Create Package
    2. Create Function group
    3. Create RFC function module
    4. Create webservice from the function module
    5. Create service definition, select port profie and deploy service and assign to Package and transport request
    6. Executed SOAMANAGER transaction , it opens  a webpage with internet explorer defaul web page and I dont see any SOA administration related information and I dont have any clue how to proceed further.
    Please let me know if I there is any prerequisities Like SP to be installed, or any configuration / settings needs to be done.
    I am workign in SAP ECC 6.0 (SAP version 700)
    Thanks in advance.
    Thanks
    Shanthi

    Hi,
    The steps are
    1. In start menu --> Run --> type Drivers and press enter
    2. In that select the folder etc
    3. Then open the file hosts in notepad
    4. In the hosts file add your server ip and the domain name and save it.
    5. Then in internet explorer click tools --> internet options --> connections --> lan settings ---> advanced and add the domain there also.
    it will work fine
          For this get the assist from your system Admin.

  • Consuming a webservice in ABAP ECC 6.0 without using XI/ PI

    Hi Experts,
    I wanted to consume an external webservice without using XI / PI.After doing my homework and search on sdn I came to know that we can consume webservices in ABAP using proxies using SE80(Enterprise Services).
    I am trying to create a client proxy with the URL of webservice.It asks me the option to choose between URL or HTTP.
    I am selecting URL and in the second screen it asks about the package details and after that it finishes.Later I get an error message stating "NO VENDOR SPECIFIED".Its not allowing me to create a proxy.
    So, here are my questions.
    Does anyone faced the same kind of problem?
    Can we really consume a webservice without using XI / PI or any other middleware?
    Is it possible to consume the webservice only with URL or WSDL file ?
    Please let me know the exact process.
    Thanks in Advance.
    Shanker Pandey.

    Hi Martin,
      Please check these following links. Though you have reported already, these may help
    Proxy Object generation error using Wizard for Web Service Consumption
    Also, please have a look @ /people/thomas.jung/blog/2006/03/13/develop-a-web-service-that-sends-an-email--in-abap-netweaver-04s
    Hope this helps,
    Karthik

  • Consuming Webservice in ABAP: SoapFaultCode:1

    Hi,
    I have created a webservice with NetweaverDeveloperStudio and deployed it to a J2EE. I tested it with the "NDS-Webservice-Tester" and it worked fine.
    I then created a proxy following the section for WebAS 640 in the weblog of Thomas Jung:
    /people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
    When using the "test-interface" function in SE80 (also described in Thomas weblog) I get the following result:
    <CX_AI_SYSTEM_FAULT>
    <CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
    <CODE>SoapFaultCode:1</CODE>
    <ERRORTEXT>
    000D6019F1DD004000000036000020D8000405473991B26F:
    Found 0 operation definitions using keys:
    Key name:'first-body-element-ns'
    key value: 'urn:EdilogUserManagementWebserviceWsd/EdilogUserManagementWebserviceVi/document';
    Key name:'SoapRequestWrapper'
    key value:'getCompany';
    </ERRORTEXT>
    <LANGUAGE />
    </CX_AI_SYSTEM_FAULT>
    Any idea what might cause this error? Is there a list with the SoapErrorCodes and their specific meanings?
    Thanks and regards
    Jan Hempel

    I solved the problem "accidentally": The name of the Webservice was to long! Changing the name from "EdilogUserManagementWebservice" to "UserManagement" did the trick.
    This is probably due to the restricted fieldlength of ABAP-programnames.
    Regards
    Jan Hempel

  • Error Consuming a webservice from ABAP

    Hi all,
      I am consuming an external webservice from abap. I created teh proxy using WSDl file. While testing teh service its giving an exception like this-
    "JAXB unmarshalling exception: Unable to create an instance of de.*******v2.MeldungType; nested exception is javax.xml.bind.UnmarshalExcept
    ion: Unable to create an instance of de.****.MeldungType# - with linked exception:#[java.lang.InstantiationException]"
    With a soapfaultcode: 1..
    can any one help out in arriving at teh reason for this..
    Regards
    Sandeep

    I've seen lots of unmarshalling errors whilst trying to consume web services via Web Dynpro Java...  Usually, it was due to an inconsistency between the WSDL file being used and the underlying web service definition.  It might be worth checking the WSDL you are using is correct and up to date, in case the underlying service interface has changed.
    Also worth checking if you have any simple boolean type parameters defined as part of the service interface - they have to have a value assigned when you call the service and cannot be null.
    HTH.

  • Calling a Webservice From ABAP

    Hi All,
    Can We make a Webservice call From ABAP ???
    Regards
    Vamsi

    Vamsi,
    1. The Following links were used by me when I was working with Web services XI:
    Hope these links are useful to you.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
    http://help.sap.com/saphelp_nw04/helpdata/en/31/daa0404dd52b54e10000000a1550b0/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ebb4c490-0201-0010-86be-88dd6fd46475
    /people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
    2. You can create webservices directly in the ABAP stack of CRM. To do so, refer to the following...
    http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/frameset.htm
    Web Services Development in ABAP [original link is broken]

  • Error in consuming webservices using ABAP

    Dear Gurus,
    I am trying to consume webservices using ABAP. We dont have XI installed and no java instance installed.
    I created a customer proxy through SE80 and generated a proxy class by giving a WSDL link and also defined logical port. Traditionally followed the steps. But while testing webservices , I get a ICF error.
    The error is as follows:
    SOAP : 1:023 SRT : Processing error in internet communication framework ("ICF error when recieving the response  ICM_HTTP_CONNECTION_FAILED)
    Please let me know the cause of this error and solution to be provided.
    I also tried to call the method from an abap program, But I get CX_AI_SYSTEM_FAULT exception.
    Awaiting your replies.
    Thanks in advance for your support and valuable time.
    Thanks
    Gurushanthi

    Hi Gurushanthi,
    It could one of several problems, examples:
    - A firewall setting
    - http communication out disabled by Basis team or
    - The logical port wasn't configured correctly.
    Try the suggestions in this thread to narrow down the reason (particularly the telnet test from the server):
    [Re: Error testing external web service ICM_HTTP_CONNECTION_FAILED;
    Regards, Trevor

  • How to consume json webservice in abap?

    hello  every one please help me how to consume json format webservice in abap.
    i am new in abap please help me out .
    Thanks&Regards
    ~Ahmad

    hi check this,
    First create a web service in SAP. The blog by Uwe Kunath descibes this clearly. Then create an Xcode project and use the ASIHTTPRequest wrapper to connect to the web service. Parse the response with the KissXML parser. A more out of the box solution is NetWeaver Gateway. It also let you use SAP web services but it also generates iOs code for you. SAP just released a trial version in de download section.
    Example of ASIHTTPRequest
    - (void)getFlightData:(NSString *) selectedDate {
         NSURL *url = [NSURL URLWithString:@"http://abap.sapdev.nl:8000/sap/resources/flights/from/%/to/%/date/20110128?sap-client=001"];
         ASIHTTPRequest *request = [ASIHTTPRequest requestWithURL:url];
         [request setUsername:@"BCUSER"];
         [request setPassword:@"minisap"];
         [request startSynchronous];
         NSError *error = [request error];
         if (!error) {
              NSString *response = [request responseString];
              [self parseXML:response];
    Example of KissXML
    -(void)parseXML:(NSString*)source {
         NSError *error = nil;
         DDXMLDocument *theDocument = [[DDXMLDocument alloc] initWithXMLString:source options:0 error:&error];
         NSArray *results = [theDocument nodesForXPath:@"/asx:abap/asx:values/TAB/BAPISFLDAT" error:&error];
         for (DDXMLElement *flightdetail in results) {
              NSString *airlineid =   [[flightdetail elementForName:@"AIRLINEID"] stringValue];
              NSString *airline =     [[flightdetail elementForName:@"AIRLINE"] stringValue];

  • Call (consume) a webservice from ABAP for dummies

    Hi
    I find the documentation for this topic very confusing. It a badly structured mix of documentation of client scenarios, server scenarios and worst of all a lot of XI nonsense.
    I need purely client scenario documentation without any info about XI and without any info about creating web services.
    I just need to know how to consume a web based webservice in ABAP program. Where can I find this docu?
    I have tried to generate proxies from different WSDL sources, but it always fails with different error messages.
    Can anyone suggest a simple WSDL webservice usefull for testing my setup?
    Best regards
    Thomas Madsen Nielsen

    You are right, the help files do mix consuming and creating, but they do provide a list of steps for consuming and what you need to do.  To consume a web service, the general steps you need to follow are:
    - Create an extendable package with use accesses SAI_SXMS, SAI_TOOLS, SAPPINT
    - Create a proxy class using the wizard in SE80 (right click on the package -> Create -> Enterprise Service) - the creation of the class depends on the WSDL document - you can either generate based on the url  for the WSDL or download the WSDL document and import it as a file in the wizard.  You may need to tinker with the WSDL document to get the class generation to complete successfully. Your WSDL is here: [http://maptp12.map24.com/map24/webservices1.5?soap=Map24Routing]
    - Create a logical port in LPCONFIG or SOAMANAGER (assumes NW 7.0 SP14 or later) with information in the WSDL
    - Create a program to consume the service method - it will look something like this (abbreviated):
    DATA: gv_client_proxy  TYPE REF TO zcwsbb_co_global_weather_soap,
          gv_sys_exception TYPE REF TO cx_ai_system_fault.
    DATA: gs_request   TYPE zcwsbb_get_weather_soap_in,
          gs_response  TYPE zcwsbb_get_weather_soap_out,
          gs_weather   TYPE zst_currentweather.
    DATA: gv_message   TYPE string.
    TRY.
        CREATE OBJECT gv_client_proxy.
        CALL METHOD gv_client_proxy->get_weather
          EXPORTING
            input  = gs_request
          IMPORTING
            output = gs_response.
      CATCH cx_ai_system_fault INTO gv_sys_exception.
        CALL METHOD gv_sys_exception->if_message~get_text
          RECEIVING
            result = gv_message.
        WRITE: gv_message.
        FREE: gv_client_proxy, gv_sys_exception.
        EXIT.
    ENDTRY.
    - Transform the response as required using ST or XSLT

  • Problem when trying to use Google WebService with abap

    Hello,
    I want to call a Google webservice from abap but I can't create the proxy class.
    The WSDL of this webservice is located at   
    [<a href="http://api.google.com/GoogleSearch.wsdl">http://api.google.com/GoogleSearch.wsdl</a>
    When I try to create the proxy class with transaction SE80, I have the following error message (SPRX046) : <i>Proxy generation terminated: Message must have exactly one part     
    </i>     
    Does anyone have an idea to solve this problem  (We are in ECC 6.0 NW 2004S) ?
    How can we do if <message> has multiple <part> entries ?
    Thanks
    JLG

    hi,
    you can't create a proxy for the google API because Google's webservices are <b>RPC style</b> and the proxy wizard of WAS ABAP on NW2004s supports <b>document style</b> webservices only.
    Search Google for the keywords mentioned and you'll find a lot of discussions and explanations of the difference of these two styles.
    regards,
    anton

  • Consume webservice from ABAP : SoapFaultCode:4

    Hi ,
        I need your valuable ideas in overcoming the problem mentioned below.
        This problem relates to consumption of a webservice from ABAP - Client Proxy without XI. The system is WAS 6.40.
    I had created a client proxy (along with the corresponding methods) using a WSDL file pasted below. I had also created a logical port for the proxy class generated.
    When I test the interface for one of the methods , I get the following error message.
    <u>Error Message</u>
    <?xml version="1.0" encoding="utf-8" ?>
    - <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
    - <asx:values>
      <SYSTEMFAULT href="#o103" />
      </asx:values>
    - <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
    - <cls:CX_AI_SYSTEM_FAULT id="o103">
    - <CX_ROOT>
      <TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
      <PREVIOUS />
      <KERNEL_ERRID />
    - <INTERNAL_SOURCE_POS>
      <PROGID>193</PROGID>
      <CONTID>1050</CONTID>
      </INTERNAL_SOURCE_POS>
      </CX_ROOT>
      <CX_STATIC_CHECK />
    - <CX_AI_SYSTEM_FAULT>
      <CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
      <CODE>SoapFaultCode:4</CODE>
      <ERRORTEXT>System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: //10.136.129.245/PinnacleWebServices/DatabaseAvailable. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</ERRORTEXT>
      <LANGUAGE />
      </CX_AI_SYSTEM_FAULT>
      </cls:CX_AI_SYSTEM_FAULT>
      </asx:heap>
      </asx:abap>
    <u>WDSL file used for creating the Client Proxy</u>
    <?xml version="1.0" encoding="utf-8"?>
    <wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="//10.136.129.245/PinnacleWebServices" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" targetNamespace="//10.136.129.245/PinnacleWebServices" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
       <wsdl:types>
          <s:schema elementFormDefault="qualified" targetNamespace="//10.136.129.245/PinnacleWebServices">
             <s:element name="DatabaseAvailable">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="s_dbalias" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="DatabaseAvailableResponse">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="DatabaseAvailableResult" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddCustomers">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="s_dbalias" type="s:string" />
                      <s:element minOccurs="0" maxOccurs="1" name="s_xml" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddCustomersResponse">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="AddCustomersResult" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddContracts">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="s_dbalias" type="s:string" />
                      <s:element minOccurs="0" maxOccurs="1" name="s_xml" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddContractsResponse">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="AddContractsResult" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddInstalledEquipment">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="s_dbalias" type="s:string" />
                      <s:element minOccurs="0" maxOccurs="1" name="s_xml" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddInstalledEquipmentResponse">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="AddInstalledEquipmentResult" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddProducts">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="s_dbalias" type="s:string" />
                      <s:element minOccurs="0" maxOccurs="1" name="s_xml" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddProductsResponse">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="AddProductsResult" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddCreditAlerts">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="s_dbalias" type="s:string" />
                      <s:element minOccurs="0" maxOccurs="1" name="s_xml" type="s:string" />
                      <s:element minOccurs="1" maxOccurs="1" name="bool_updatecustomers" type="s:boolean" />
                      <s:element minOccurs="1" maxOccurs="1" name="bool_updatecontracts" type="s:boolean" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddCreditAlertsResponse">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="AddCreditAlertsResult" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddStockFigures">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="s_dbalias" type="s:string" />
                      <s:element minOccurs="0" maxOccurs="1" name="s_xml" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="AddStockFiguresResponse">
                <s:complexType>
                   <s:sequence>
                      <s:element minOccurs="0" maxOccurs="1" name="AddStockFiguresResult" type="s:string" />
                   </s:sequence>
                </s:complexType>
             </s:element>
             <s:element name="string" nillable="true" type="s:string" />
          </s:schema>
       </wsdl:types>
       <wsdl:message name="DatabaseAvailableSoapIn">
          <wsdl:part name="parameters" element="tns:DatabaseAvailable" />
       </wsdl:message>
       <wsdl:message name="DatabaseAvailableSoapOut">
          <wsdl:part name="parameters" element="tns:DatabaseAvailableResponse" />
       </wsdl:message>
       <wsdl:message name="AddCustomersSoapIn">
          <wsdl:part name="parameters" element="tns:AddCustomers" />
       </wsdl:message>
       <wsdl:message name="AddCustomersSoapOut">
          <wsdl:part name="parameters" element="tns:AddCustomersResponse" />
       </wsdl:message>
       <wsdl:message name="AddContractsSoapIn">
          <wsdl:part name="parameters" element="tns:AddContracts" />
       </wsdl:message>
       <wsdl:message name="AddContractsSoapOut">
          <wsdl:part name="parameters" element="tns:AddContractsResponse" />
       </wsdl:message>
       <wsdl:message name="AddInstalledEquipmentSoapIn">
          <wsdl:part name="parameters" element="tns:AddInstalledEquipment" />
       </wsdl:message>
       <wsdl:message name="AddInstalledEquipmentSoapOut">
          <wsdl:part name="parameters" element="tns:AddInstalledEquipmentResponse" />
       </wsdl:message>
       <wsdl:message name="AddProductsSoapIn">
          <wsdl:part name="parameters" element="tns:AddProducts" />
       </wsdl:message>
       <wsdl:message name="AddProductsSoapOut">
          <wsdl:part name="parameters" element="tns:AddProductsResponse" />
       </wsdl:message>
       <wsdl:message name="AddCreditAlertsSoapIn">
          <wsdl:part name="parameters" element="tns:AddCreditAlerts" />
       </wsdl:message>
       <wsdl:message name="AddCreditAlertsSoapOut">
          <wsdl:part name="parameters" element="tns:AddCreditAlertsResponse" />
       </wsdl:message>
       <wsdl:message name="AddStockFiguresSoapIn">
          <wsdl:part name="parameters" element="tns:AddStockFigures" />
       </wsdl:message>
       <wsdl:message name="AddStockFiguresSoapOut">
          <wsdl:part name="parameters" element="tns:AddStockFiguresResponse" />
       </wsdl:message>
       <wsdl:message name="DatabaseAvailableHttpGetIn">
          <wsdl:part name="s_dbalias" type="s:string" />
       </wsdl:message>
       <wsdl:message name="DatabaseAvailableHttpGetOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddCustomersHttpGetIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddCustomersHttpGetOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddContractsHttpGetIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddContractsHttpGetOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddInstalledEquipmentHttpGetIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddInstalledEquipmentHttpGetOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddProductsHttpGetIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddProductsHttpGetOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddCreditAlertsHttpGetIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
          <wsdl:part name="bool_updatecustomers" type="s:string" />
          <wsdl:part name="bool_updatecontracts" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddCreditAlertsHttpGetOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddStockFiguresHttpGetIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddStockFiguresHttpGetOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="DatabaseAvailableHttpPostIn">
          <wsdl:part name="s_dbalias" type="s:string" />
       </wsdl:message>
       <wsdl:message name="DatabaseAvailableHttpPostOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddCustomersHttpPostIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddCustomersHttpPostOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddContractsHttpPostIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddContractsHttpPostOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddInstalledEquipmentHttpPostIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddInstalledEquipmentHttpPostOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddProductsHttpPostIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddProductsHttpPostOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddCreditAlertsHttpPostIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
          <wsdl:part name="bool_updatecustomers" type="s:string" />
          <wsdl:part name="bool_updatecontracts" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddCreditAlertsHttpPostOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:message name="AddStockFiguresHttpPostIn">
          <wsdl:part name="s_dbalias" type="s:string" />
          <wsdl:part name="s_xml" type="s:string" />
       </wsdl:message>
       <wsdl:message name="AddStockFiguresHttpPostOut">
          <wsdl:part name="Body" element="tns:string" />
       </wsdl:message>
       <wsdl:portType name="Pinnacle_x0020_Web_x0020_ServicesSoap">
          <wsdl:operation name="DatabaseAvailable">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Checks if a connection to the selected database is available.</documentation>
             <wsdl:input message="tns:DatabaseAvailableSoapIn" />
             <wsdl:output message="tns:DatabaseAvailableSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="AddCustomers">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Customers within Service Director</documentation>
             <wsdl:input message="tns:AddCustomersSoapIn" />
             <wsdl:output message="tns:AddCustomersSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="AddContracts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Contracts within Service Director</documentation>
             <wsdl:input message="tns:AddContractsSoapIn" />
             <wsdl:output message="tns:AddContractsSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="AddInstalledEquipment">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Installed Equipment within Service Director</documentation>
             <wsdl:input message="tns:AddInstalledEquipmentSoapIn" />
             <wsdl:output message="tns:AddInstalledEquipmentSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="AddProducts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Products within Service Director</documentation>
             <wsdl:input message="tns:AddProductsSoapIn" />
             <wsdl:output message="tns:AddProductsSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="AddCreditAlerts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add Credit Alerts to Customers and/or Contracts within Service Director. Warning - Will remove all credit alerts first as it assumes a full list is provided every time.</documentation>
             <wsdl:input message="tns:AddCreditAlertsSoapIn" />
             <wsdl:output message="tns:AddCreditAlertsSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="AddStockFigures">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add Stock Figures to mobile_data_connector within Service Director in order that the PDA get updated.</documentation>
             <wsdl:input message="tns:AddStockFiguresSoapIn" />
             <wsdl:output message="tns:AddStockFiguresSoapOut" />
          </wsdl:operation>
       </wsdl:portType>
       <wsdl:portType name="Pinnacle_x0020_Web_x0020_ServicesHttpGet">
          <wsdl:operation name="DatabaseAvailable">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Checks if a connection to the selected database is available.</documentation>
             <wsdl:input message="tns:DatabaseAvailableHttpGetIn" />
             <wsdl:output message="tns:DatabaseAvailableHttpGetOut" />
          </wsdl:operation>
          <wsdl:operation name="AddCustomers">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Customers within Service Director</documentation>
             <wsdl:input message="tns:AddCustomersHttpGetIn" />
             <wsdl:output message="tns:AddCustomersHttpGetOut" />
          </wsdl:operation>
          <wsdl:operation name="AddContracts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Contracts within Service Director</documentation>
             <wsdl:input message="tns:AddContractsHttpGetIn" />
             <wsdl:output message="tns:AddContractsHttpGetOut" />
          </wsdl:operation>
          <wsdl:operation name="AddInstalledEquipment">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Installed Equipment within Service Director</documentation>
             <wsdl:input message="tns:AddInstalledEquipmentHttpGetIn" />
             <wsdl:output message="tns:AddInstalledEquipmentHttpGetOut" />
          </wsdl:operation>
          <wsdl:operation name="AddProducts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Products within Service Director</documentation>
             <wsdl:input message="tns:AddProductsHttpGetIn" />
             <wsdl:output message="tns:AddProductsHttpGetOut" />
          </wsdl:operation>
          <wsdl:operation name="AddCreditAlerts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add Credit Alerts to Customers and/or Contracts within Service Director. Warning - Will remove all credit alerts first as it assumes a full list is provided every time.</documentation>
             <wsdl:input message="tns:AddCreditAlertsHttpGetIn" />
             <wsdl:output message="tns:AddCreditAlertsHttpGetOut" />
          </wsdl:operation>
          <wsdl:operation name="AddStockFigures">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add Stock Figures to mobile_data_connector within Service Director in order that the PDA get updated.</documentation>
             <wsdl:input message="tns:AddStockFiguresHttpGetIn" />
             <wsdl:output message="tns:AddStockFiguresHttpGetOut" />
          </wsdl:operation>
       </wsdl:portType>
       <wsdl:portType name="Pinnacle_x0020_Web_x0020_ServicesHttpPost">
          <wsdl:operation name="DatabaseAvailable">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Checks if a connection to the selected database is available.</documentation>
             <wsdl:input message="tns:DatabaseAvailableHttpPostIn" />
             <wsdl:output message="tns:DatabaseAvailableHttpPostOut" />
          </wsdl:operation>
          <wsdl:operation name="AddCustomers">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Customers within Service Director</documentation>
             <wsdl:input message="tns:AddCustomersHttpPostIn" />
             <wsdl:output message="tns:AddCustomersHttpPostOut" />
          </wsdl:operation>
          <wsdl:operation name="AddContracts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Contracts within Service Director</documentation>
             <wsdl:input message="tns:AddContractsHttpPostIn" />
             <wsdl:output message="tns:AddContractsHttpPostOut" />
          </wsdl:operation>
          <wsdl:operation name="AddInstalledEquipment">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Installed Equipment within Service Director</documentation>
             <wsdl:input message="tns:AddInstalledEquipmentHttpPostIn" />
             <wsdl:output message="tns:AddInstalledEquipmentHttpPostOut" />
          </wsdl:operation>
          <wsdl:operation name="AddProducts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add or Update Products within Service Director</documentation>
             <wsdl:input message="tns:AddProductsHttpPostIn" />
             <wsdl:output message="tns:AddProductsHttpPostOut" />
          </wsdl:operation>
          <wsdl:operation name="AddCreditAlerts">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add Credit Alerts to Customers and/or Contracts within Service Director. Warning - Will remove all credit alerts first as it assumes a full list is provided every time.</documentation>
             <wsdl:input message="tns:AddCreditAlertsHttpPostIn" />
             <wsdl:output message="tns:AddCreditAlertsHttpPostOut" />
          </wsdl:operation>
          <wsdl:operation name="AddStockFigures">
             <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">Add Stock Figures to mobile_data_connector within Service Director in order that the PDA get updated.</documentation>
             <wsdl:input message="tns:AddStockFiguresHttpPostIn" />
             <wsdl:output message="tns:AddStockFiguresHttpPostOut" />
          </wsdl:operation>
       </wsdl:portType>
       <wsdl:binding name="Pinnacle_x0020_Web_x0020_ServicesSoap" type="tns:Pinnacle_x0020_Web_x0020_ServicesSoap">
          <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
          <wsdl:operation name="DatabaseAvailable">
             <soap:operation soapAction="//10.136.129.245/PinnacleWebServices/DatabaseAvailable" style="document" />
             <wsdl:input>
                <soap:body use="literal" />
             </wsdl:input>
             <wsdl:output>
                <soap:body use="literal" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddCustomers">
             <soap:operation soapAction="//10.136.129.245/PinnacleWebServices/AddCustomers" style="document" />
             <wsdl:input>
                <soap:body use="literal" />
             </wsdl:input>
             <wsdl:output>
                <soap:body use="literal" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddContracts">
             <soap:operation soapAction="//10.136.129.245/PinnacleWebServices/AddContracts" style="document" />
             <wsdl:input>
                <soap:body use="literal" />
             </wsdl:input>
             <wsdl:output>
                <soap:body use="literal" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddInstalledEquipment">
             <soap:operation soapAction="//10.136.129.245/PinnacleWebServices/AddInstalledEquipment" style="document" />
             <wsdl:input>
                <soap:body use="literal" />
             </wsdl:input>
             <wsdl:output>
                <soap:body use="literal" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddProducts">
             <soap:operation soapAction="//10.136.129.245/PinnacleWebServices/AddProducts" style="document" />
             <wsdl:input>
                <soap:body use="literal" />
             </wsdl:input>
             <wsdl:output>
                <soap:body use="literal" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddCreditAlerts">
             <soap:operation soapAction="//10.136.129.245/PinnacleWebServices/AddCreditAlerts" style="document" />
             <wsdl:input>
                <soap:body use="literal" />
             </wsdl:input>
             <wsdl:output>
                <soap:body use="literal" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddStockFigures">
             <soap:operation soapAction="//10.136.129.245/PinnacleWebServices/AddStockFigures" style="document" />
             <wsdl:input>
                <soap:body use="literal" />
             </wsdl:input>
             <wsdl:output>
                <soap:body use="literal" />
             </wsdl:output>
          </wsdl:operation>
       </wsdl:binding>
       <wsdl:binding name="Pinnacle_x0020_Web_x0020_ServicesHttpGet" type="tns:Pinnacle_x0020_Web_x0020_ServicesHttpGet">
          <http:binding verb="GET" />
          <wsdl:operation name="DatabaseAvailable">
             <http:operation location="/DatabaseAvailable" />
             <wsdl:input>
                <http:urlEncoded />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddCustomers">
             <http:operation location="/AddCustomers" />
             <wsdl:input>
                <http:urlEncoded />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddContracts">
             <http:operation location="/AddContracts" />
             <wsdl:input>
                <http:urlEncoded />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddInstalledEquipment">
             <http:operation location="/AddInstalledEquipment" />
             <wsdl:input>
                <http:urlEncoded />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddProducts">
             <http:operation location="/AddProducts" />
             <wsdl:input>
                <http:urlEncoded />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddCreditAlerts">
             <http:operation location="/AddCreditAlerts" />
             <wsdl:input>
                <http:urlEncoded />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddStockFigures">
             <http:operation location="/AddStockFigures" />
             <wsdl:input>
                <http:urlEncoded />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
       </wsdl:binding>
       <wsdl:binding name="Pinnacle_x0020_Web_x0020_ServicesHttpPost" type="tns:Pinnacle_x0020_Web_x0020_ServicesHttpPost">
          <http:binding verb="POST" />
          <wsdl:operation name="DatabaseAvailable">
             <http:operation location="/DatabaseAvailable" />
             <wsdl:input>
                <mime:content type="application/x-www-form-urlencoded" />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddCustomers">
             <http:operation location="/AddCustomers" />
             <wsdl:input>
                <mime:content type="application/x-www-form-urlencoded" />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddContracts">
             <http:operation location="/AddContracts" />
             <wsdl:input>
                <mime:content type="application/x-www-form-urlencoded" />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddInstalledEquipment">
             <http:operation location="/AddInstalledEquipment" />
             <wsdl:input>
                <mime:content type="application/x-www-form-urlencoded" />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddProducts">
             <http:operation location="/AddProducts" />
             <wsdl:input>
                <mime:content type="application/x-www-form-urlencoded" />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddCreditAlerts">
             <http:operation location="/AddCreditAlerts" />
             <wsdl:input>
                <mime:content type="application/x-www-form-urlencoded" />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="AddStockFigures">
             <http:operation location="/AddStockFigures" />
             <wsdl:input>
                <mime:content type="application/x-www-form-urlencoded" />
             </wsdl:input>
             <wsdl:output>
                <mime:mimeXml part="Body" />
             </wsdl:output>
          </wsdl:operation>
       </wsdl:binding>
       <wsdl:service name="Pinnacle_x0020_Web_x0020_Services">
          <wsdl:port name="Pinnacle_x0020_Web_x0020_ServicesSoap" binding="tns:Pinnacle_x0020_Web_x0020_ServicesSoap">
             <soap:address location="http://10.136.129.245/pinnaclewebservices/maintenance.asmx" />
          </wsdl:port>
          <wsdl:port name="Pinnacle_x0020_Web_x0020_ServicesHttpGet" binding="tns:Pinnacle_x0020_Web_x0020_ServicesHttpGet">
             <http:address location="http://10.136.129.245/pinnaclewebservices/maintenance.asmx" />
          </wsdl:port>
          <wsdl:port name="Pinnacle_x0020_Web_x0020_ServicesHttpPost" binding="tns:Pinnacle_x0020_Web_x0020_ServicesHttpPost">
             <http:address location="http://10.136.129.245/pinnaclewebservices/maintenance.asmx" />
          </wsdl:port>
       </wsdl:service>
    </wsdl:definitions>
    Thanks in advance.

    Hi Raja,
                  Thanks for your prompt reply. I tried changing in the WSDL file the SOAP action parameters (http) like you said and still I got the same error message while testing the interface.
                  I have corrected the problem by trying a different approach. Earlier I used file option for Client Proxy creation and I got the error message.
    Now I created the Client Proxy by using the option URL/HTTP destination ( which was also showing errors earlier but it is OK now after our Network Specialists opened the concerned port.)
                    Your reply was usefull as it helped me to check the  "Soap Action" in the "OPERATIONS" tab of the "LOGICAL PORT" for the client proxy. I have awarded the points for that.
                    I have seen your Blogs and the your replies to the questions in this form. I would like to thank you and all the like minded contributors of this forum. Keep up the good work.
    Regards.
    François

  • Calling an existing webservice from ABAP ?

    I am trying to call an existing webservice from abap and cannot seem to get it right.
    We are on 640.
    What are the steps I need to follow ?
    The address of the test wsdl is http://obcbox:50000/EMWSApp/DCCGen?wsdl
    and http://obcbox:50000/wsnavigator/jsps/explorer.jsp?localWS=RU1XU0FwcC9zYXAuY29tJTJGRU1XU0FwcEVhci9FTVdTYXBwLmphcg%3D%3D
    I need to be able to send data to the dccGenerator so it can do its work.
    Any help would be greatly appreciated.
    Cheers Steve.

    The following code will call the web service and fill the data into internal table which was received from the Web service. This code will send & Receive the data from ABAP to Webservice.
    Change the Header detail as per your Webservice.
    REPORT  ZWORKORDER.
    * Author : Raja T
    * Company :******
    TYPES: BEGIN OF OUTTAB1 ,
      JOBCODE(20),
      COMPONENTCODE(20),
      ACCURATEHOURS(20),
      ACCURATECOST(20),
      LENGTH TYPE I,
       END OF OUTTAB1 .
    DATA: OUTTAB TYPE  TABLE OF OUTTAB1.
    DATA: TAB TYPE OUTTAB1.
    DATA: WF_O LIKE LINE OF OUTTAB .
    DATA: XSLT_ERR TYPE REF TO CX_XSLT_EXCEPTION .
    DATA: RLENGTH TYPE I,
          TXLEN TYPE STRING  .
    DATA: HTTP_CLIENT TYPE REF TO IF_HTTP_CLIENT .
    DATA: WF_STRING TYPE STRING .
    DATA: WF_STRING1 TYPE STRING .
    DATA: WF_PROXY TYPE STRING ,
          WF_PORT TYPE STRING .
    CLEAR WF_STRING .
    * Form the input string to send the Input Data to Web service.
    CONCATENATE
    '<?xml version="1.0" encoding="utf-8"?>'
    '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
    '  <soap:Body>'
    '    <GetWorkOrder xmlns="http://*******erica.net/webservices/">'
    '      <nWorkOrder>2</nWorkOrder>'
    '      <nDistributorCode>4871</nDistributorCode>'
    '      <model>HM400</model>'
    '     <type>1 </type>'
    '    </GetWorkOrder>'
    '  </soap:Body>'
    '</soap:Envelope>'
    INTO WF_STRING .
    CLEAR :RLENGTH , TXLEN .
    RLENGTH = STRLEN( WF_STRING ) .
    MOVE: RLENGTH TO TXLEN .
    CLEAR: WF_PROXY, WF_PORT .
    CALL METHOD CL_HTTP_CLIENT=>CREATE
      EXPORTING
        HOST    = '192.168.1.41' "'http://****merica.net/webservices'
        SERVICE = '8080'
        SCHEME  = '1'
      IMPORTING
        CLIENT  = HTTP_CLIENT.
    HTTP_CLIENT->PROPERTYTYPE_LOGON_POPUP = HTTP_CLIENT->CO_DISABLED.
    CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING
        NAME  = '~request_method'
        VALUE = 'POST'.
    CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING
        NAME  = '~server_protocol'
        VALUE = 'HTTP/1.1'.
    CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING
        NAME  = '~request_uri'
        VALUE = '/service/accurate/workorder.asmx?'.
    CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING
        NAME  = 'Content-Type'
        VALUE = 'text/xml; charset=utf-8'.
    CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING
        NAME  = 'Content-Length'
        VALUE = TXLEN.
    CALL METHOD HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING
        NAME  = 'SOAPAction'
        VALUE = 'http://********merica.net/webservices/GetWorkOrder'.
    CALL METHOD HTTP_CLIENT->REQUEST->SET_CDATA
      EXPORTING
        DATA   = WF_STRING
        OFFSET = 0
        LENGTH = RLENGTH.
    * Send the Input Data to Web service.
    CALL METHOD HTTP_CLIENT->SEND
      EXCEPTIONS
        HTTP_COMMUNICATION_FAILURE = 1
        HTTP_INVALID_STATE         = 2.
    * Receive the Input from Web Serice.
    CALL METHOD HTTP_CLIENT->RECEIVE
      EXCEPTIONS
        HTTP_COMMUNICATION_FAILURE = 1
        HTTP_INVALID_STATE         = 2
        HTTP_PROCESSING_FAILED     = 3.
    CLEAR WF_STRING1 .
    WF_STRING1 = HTTP_CLIENT->RESPONSE->GET_CDATA( ).
    DATA: LENGTH TYPE I.
    LENGTH = STRLEN( WF_STRING1 ).
    DATA: VALUE_FIELD TYPE NAME_KOMP.
    DATA: VALUE TYPE REF TO DATA.
    FIELD-SYMBOLS: <FS_CONVERTED_DATA>.
    DATA: TAB1 TYPE TABLE OF STRING.
    DATA: FROM_LENGTH TYPE I VALUE 1.
    DATA: TO_LENGTH TYPE I.
    DATA: DIFF TYPE I.
    DATA: START TYPE I VALUE 1.
    DO.
    * JOBCODE.
      SEARCH WF_STRING1 FOR 'JobCode=' . "STARTING AT START .
      IF SY-SUBRC <> 0.
        EXIT.
      ENDIF.
      FROM_LENGTH = SY-FDPOS .
      FROM_LENGTH = FROM_LENGTH  + 8.
      SEARCH WF_STRING1 FOR 'JobDescription=' ."STARTING AT START ..
      TO_LENGTH = SY-FDPOS .
      DIFF = TO_LENGTH - FROM_LENGTH .
      MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-JOBCODE.
      TO_LENGTH = DIFF + TO_LENGTH.
      SHIFT WF_STRING1 BY TO_LENGTH PLACES.
    * COMPONENT CODE
      SEARCH WF_STRING1 FOR 'ComponentCode=' .
      IF SY-SUBRC <> 0.
        EXIT.
      ENDIF.
      FROM_LENGTH = SY-FDPOS .
      FROM_LENGTH = FROM_LENGTH  + 14.
      SEARCH WF_STRING1 FOR 'ComponentDescription=' .
      TO_LENGTH = SY-FDPOS .
      DIFF = TO_LENGTH - FROM_LENGTH .
      MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-COMPONENTCODE.
      TO_LENGTH = DIFF + TO_LENGTH.
      SHIFT WF_STRING1 BY TO_LENGTH PLACES.
    * AccurateHours
      SEARCH WF_STRING1 FOR 'AccurateHours=' .
      IF SY-SUBRC <> 0.
        EXIT.
      ENDIF.
      FROM_LENGTH = SY-FDPOS .
      FROM_LENGTH = FROM_LENGTH  + 14.
      SEARCH WF_STRING1 FOR 'AccurateCost='.
      TO_LENGTH = SY-FDPOS .
      DIFF = TO_LENGTH - FROM_LENGTH .
      MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-ACCURATEHOURS.
      TO_LENGTH = DIFF + TO_LENGTH.
    *  AccurateCost
      SEARCH WF_STRING1 FOR 'AccurateCost='.
      FROM_LENGTH =  SY-FDPOS.
      FROM_LENGTH =  FROM_LENGTH + 13.
      SEARCH WF_STRING1 FOR '/>'.
      TO_LENGTH = SY-FDPOS.
      DIFF = TO_LENGTH - FROM_LENGTH .
      MOVE WF_STRING1+FROM_LENGTH(DIFF) TO TAB-ACCURATECOST.
      TO_LENGTH = DIFF + TO_LENGTH.
      SHIFT WF_STRING1 BY TO_LENGTH PLACES.
      APPEND TAB TO OUTTAB.
    ENDDO.
    WRITE: (10) 'JOBCODE'.
    WRITE (20) 'COMPONENTCODE'.
    WRITE (30) 'ACCURATEHOURS'.
    WRITE (40) 'ACCURATECOST'.
    LOOP AT OUTTAB INTO TAB.
      WRITE:/ TAB-JOBCODE .
      WRITE (20) TAB-COMPONENTCODE.
      WRITE (30) TAB-ACCURATEHOURS.
      WRITE (40) TAB-ACCURATECOST.
    ENDLOOP .
    Message was edited by:
            Raja T

  • WEBSERVICE https abap proxy.

    Friends I need to create a webservice that connects me with HTTPS
    i need the steps know for the configuration of this one if someone can help me
    Thank you very much.

    Hi,
    pls go thru the link below.
    Web Services Development in ABAP [original link is broken]
    The links 'Building WebServices in ABAP' Parts - 1 2 3 4
    here u can find the sap tutor file which will help you in creating web services. (hoping u had installed sap tutor software.)
    go thru these too
    http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f1b585-0a01-0010-3d96-ad0ea291c4f9
    regards,
    teja.

Maybe you are looking for

  • Itunes no longer recognizes my ipad

    connecting my ipad to itunes via mac itunes error messages and do not reconnect the ipad and it does not load how can I do. I made a restore nothing changes

  • SAP Full Offline Backup Problem

    Hi all, I am a newbie to SAP. I was attempting an Full Offline Backup through the DB13 transaction. SAP is installed in a RHEL Cluster with Oracle DB 10gR2. Because of Cluster Operation the Full Offline Backup is not performed successfully because wh

  • Help an amateur?!

    i need to write a program to print a calender, the difficult bit for me is writing a code to find leap years. how do i program my calender to know what year is a leap year? starting from year 0.

  • Problem with oralce supplied packages and views

    Hi All, How to handle oracle suppiled packages like DBMS_SCHEDULER,DBMS_PIPE,dbms_application_info inTimesten. i have procedures using thease procedures packages and oracle specific views like v$instance and v$database etc how to make thease pL/SQL b

  • Traffic Light in MD07 MD06 ...

    Hello Gurus, I have quick question. When i run the Md07 as collective access my traffic light shows up on the extreme right hand, but i want to show up in the extreme left hand. I have looked around but couldn't find the setting. I know i can just dr