Create white edges newly in pages [multiple]
Hi,
Can I customize a new side edges with Acrobate, or you know an tool with which you can do this.
Regards
Kpf
Hi try
Many thanks that's really simple and works fine after a few try.
You will not believe what I had tried before.
All the best
Greetings from India
Similar Messages
-
Hi there. I am currently producing a newsletter and have found that, once converted into a pdf file, very fine white edges are becoming visible on the document. I have laid down on the page a few images and text boxes that bleed off the sides of the page, but still the programme insists on leaving these fine white edges.
Can anyone suggest what to do to get rid of these? I have tried high quality prints / low quality prints.. I am just at my wits end. This has happened to me before, so I thought I need to understand what the problem is.
Thanks,
MikeEXPORT the PDF and use Acrobat 5 compatibility or higher.
Google stitching and pdf for more.
Bob -
The Report create white espace in a page.
Hi!
I have a Report.rpt with this estructure and agrupations:
Agrupation 1
Agrupation 2
Agrupation 3
Detail
All the sections of this grups contain keep together and the group 2 contain a page break.
When I generate the report sometimes it have a white page as follows:
Page 1:
Agrupation 1
Agrupation 2
white espace
Page 2:
Agrupation 3
Detail
Detail
Detail
Detail
Can I delete this white espace and I see the agrupation 3 and details in a Page 1??
ThanksThe whole point of keep group together ensures that the next group does not break over a page. Consequently there will have to be white space at the bottom of the page holding the preceding group.
What would you want Crystal to do. Produce a special shorter page
Ian -
Creating a church anniversary 36-page booklet/program with full bleed.
I am fairly new to CS4 InDesign but would like to create a 36-page Church Anniversary Booklet/Program with full bleed. The size of the program should be 8 1/2 x 11. I probably will need to print it on a larger size and get it cut. (1) How can I create this type of booklet? (2) What size paper should I use to get the full size of 8 1/2 x 11 (I cannot have white edges around the program). (3) How should I set up the bleed, slug? (4) Should I use facing pages. (5) I would like to use the same background on all sheets. Thanks.
Shortknocker wrote:
What does " two-page imposed spreads" mean?
If you take two sheets of 8.5x11 paper in a stack, turn them so that the long edge is on top and you fold the left side over the right, it will look like a book in standard reading position. If you write a 1 on the front page, open the book and write 2 on the second, 3 on the third and so on, your last page will be page 8. If you pull the outside sheet and look at the page numbers, you will find page 8 on the left, with page 1 on the right, and on the back you will find page 2 on the left, with page 7 on the right.
Those pairs of pages (8 & 1, 2 & 7) are two-page spreads (pages that are beside each other), but specifically, they are imposed spreads, also known as printer's spreads. The position of a page within a printer's spread will vary, depending on how many pages there are. For example, a 16 page book will have page 16 to the left of page 1, and page 15 to the right of page 2.
When you compose the book, page three will be to the right of page 2, in what we call reader's spreads. You will want to compose in reader's spreads, and your print provider will impose the book into printer's spreads. It's important to talk to your printer before you set up the book, so that you will know what is needed. -
Creating automatic sequential lists in Pages for iOS
Maybe I'm crazy, but I am having difficulties with creating lists that work in Pages for iOS.
I am a teacher, and I have been trying to use my iPad in the classroom more. I have been trying to make simple multiple-choice review quizzes using Pages.
It seems that when I create a new list, the numbering works fine. 1, 2, 3,... No problems. When I try to add an indent with A, B, C,...etc., the number I had completely reverts to the 1. It doesn't continue to keep the sequence. And I have no control over what number comes next like on the desktop version. Am I doing something wrong, or is this a bug?
Thanks.Tables in Pages are actually spreadsheets and would appear to be your best choice.
To create a sequence of numbers input two, one after the other in adjacent cells, select both and pull down the small white dot in the bottom right corner of the selection. This will generate a continuing sequence. It is quite clever and works for all sorts of number patterns, days of the week, months, years etc.
The spreadsheet can calculate your VAT etc.
If you don't want them in a spreadsheet you can export them as text.
Peter -
How to get rid of white edges surrounding png image file?
hey im creating a website from scratch and when i drag my 8 bit png image file from my assets folder to my table on my page it apears to be fine, but when I check it in my browser there are white edges surrounding it which makes it look horrible because my background is not white. If anyone has any suggestions they'd be greatly appreciated. thanks
file:///Users/sethmarx/Desktop/xmds%20site%20folder/master%20folder/web/web.html
OK, now send me your computer.
We can't see files from your Local hard drive. Unless you publish your test page to a remote server space, nobody here can help you. Sorry.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
How to create a report with different page sizes
Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
MarcHi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
I have made an 8.5 x 11 flyer and want to create handbills, four to a page, with Photoshop or Adobe Acrobat Pro. Waht do I do?
Create a new document the size of the handbill 4-up {example if handbill is 3"X4" then the new document would be 6"X8" Plus an optional margin and bleed (don't forget to include the gutters between the handbills - The gutter is used for the opposite margin to make the white space around the individual handbill equal)}
place the original document into the new document
make sure the layers are grouped for easy moving
Drag out guides from the ruler (make sure ruler is visible) - Make the guides for each edge of the page for the margin, 2 guides between where each document should be (both rows and columns) Readjust if necessary until it looks right
Optional - Scale original document to fit the guides if necessary
Alt drag the group to the next location
Repeat 6
I can't make it any more or less detailed without see something from your screen, when in doubt post screen shots -
I want to download an image from the internet, for example, batman, create gridlines on the image page then converted into a pdf. where on adobe photo shop element 12 can I do this.
On way is to define a pattern:
https://forums.adobe.com/thread/875370?tstart=0
Another way is this neat free grid generator filter:
http://www.richardrosenman.com/software/downloads/
1. Add a blank layer above the picture layer, fill with white, and set Blend Mode to Multiply.
2. Apply the filter. There are many options. Here I chose black lines on white background with 20 square boxes across. Note that the background should be pure white (255,255,255) so as not to change the original picture.
You can also find lots of grid images on the Internet, for example a Google search on "grid" or "grid paper". As in the previous method, add this image above your picture and set its Blend Mode to Multiply. Again, the background should be pure white. -
How to create progress bar in web page!!!
Dear,
I do not know how to create progress bar in web page?
Please show me the way to solve it.
Best regards,
HuyGod your lucky/lazy
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import javax.swing.*;
import java.util.*;
import java.io.*;
public class ProgressBar extends Applet
private boolean isStandalone = false;
private int width;
private int height;
private double percentComplete;
private double fundsTarget;
private double fundsRaised;
private Properties values;
private String propertiesFile;
private JPanel jPanel1 = new JPanel();
private JProgressBar PB_FUNDS_PROGRESS = new JProgressBar();
private GridLayout gridLayout1 = new GridLayout();
private BorderLayout borderLayout1 = new BorderLayout();
private JPanel jPanel2 = new JPanel();
private JLabel jLabel1 = new JLabel();
private JLabel jLabel2 = new JLabel();
private JLabel jLabel3 = new JLabel();
private GridBagLayout gridBagLayout1 = new GridBagLayout();
private JPanel jPanel3 = new JPanel();
private JLabel jLabel4 = new JLabel();
//Construct the applet
public ProgressBar()
//Initialize the applet
public void init()
try
jbInit();
catch(Exception e)
e.printStackTrace();
//Component initialization
private void jbInit()
throws Exception
fundsTarget = new Double( 100 ).doubleValue();
fundsRaised = new Double( 50 ).doubleValue();
PB_FUNDS_PROGRESS.setBackground(Color.green);
PB_FUNDS_PROGRESS.setForeground(Color.red);
this.setLayout(gridLayout1);
jPanel1.setLayout(borderLayout1);
jPanel2.setLayout(gridBagLayout1);
jPanel1.setBackground(Color.white);
jPanel2.setBackground(Color.white);
jPanel3.setBackground(Color.white);
jLabel2.setBackground(Color.white);
jLabel1.setBackground(Color.white);
jLabel3.setBackground(Color.white);
jLabel4.setText(" ");
jLabel1.setText(" ");
jLabel2.setText(" ");
jLabel3.setText(" ");
this.setBackground(Color.white);
this.add(jPanel1, null);
jPanel1.add(PB_FUNDS_PROGRESS, BorderLayout.CENTER);
jPanel1.add(jPanel2, BorderLayout.SOUTH);
jPanel2.add(jLabel2, new GridBagConstraints(1, 0, 1, 1, 0.0, 0.0,
GridBagConstraints.WEST, GridBagConstraints.NONE, new Insets(5, 0, 5, 0), 0, 0));
jPanel2.add(jLabel1, new GridBagConstraints(2, 0, 1, 1, 0.0, 0.0,
GridBagConstraints.CENTER, GridBagConstraints.NONE, new Insets(5, 150, 5, 5), 0, 0));
jPanel2.add(jLabel3, new GridBagConstraints(0, 0, 1, 1, 0.0, 0.0,
GridBagConstraints.WEST, GridBagConstraints.NONE, new Insets(6, 5, 4, 150), 0, 0));
jPanel1.add(jPanel3, BorderLayout.NORTH);
jPanel3.add(jLabel4, null);
propertiesFile = this.getCodeBase().getFile().replaceAll("%20", " ")+"funds.properties";
System.out.println("Properties file at " + propertiesFile);
values = new Properties();
try
values.load(new FileInputStream(propertiesFile));
fundsTarget = new Double( values.getProperty("TARGET", "100").toString() ).doubleValue();
fundsRaised = new Double( values.getProperty("RAISED", "50").toString() ).doubleValue();
System.out.println("target: " + fundsTarget + " raised: " + fundsRaised);
catch (IOException ioe)
System.err.println(ioe.getMessage());
percentComplete = (fundsRaised/fundsTarget)*100;
System.out.println(percentComplete);
//Start the applet
public void start()
PB_FUNDS_PROGRESS.setMaximum(new Double(fundsTarget).intValue());
PB_FUNDS_PROGRESS.setMinimum(0);
repaint();
//Stop the applet
public void stop()
public void paint(Graphics g)
Graphics2D g2 = (Graphics2D)g;
PB_FUNDS_PROGRESS.setValue(new Double(fundsRaised).intValue());
String percent = Double.toString(percentComplete).substring(0, 4);
jLabel4.setText("Currently At " + percent + "%");
jLabel1.setText("100%");
jLabel2.setText("50%");
jLabel3.setText("0%");
//Destroy the applet
public void destroy()
public String getAppletInfo()
return "Funds progress applet by A really nice person";
} -
Hello,
I have a picture that I have extracted from its background in photoshop. Then I place it on another background in my Indesign file. The edges on the picture appear as a fine white line.
Is there a way in Indesign to make the edges of a picture transparent?
Thank youAs a mere technical footnote to that, the white edges appear because you selected them to be white ...
GIF does not support alpha-level transparency (any level from 0 to 100%) -- it is limited to either transparent or not. Since GIFs are usually used on web pages, and should have visually smooth edges even with this on-off transparency, Photoshop can interpolate the edge colors. The Save-For-Web dialog (which you presumably used) has an option to change the "background color" -- which is the color on which the image would be placed. Those are stil solid colors, not transparent: the proper alpha mix of the would-be background and the edge color.
(And if you are thinking "That must mean I can change the background to the color I used in my document", go back and read Scott's message.) -
White bars appear on page only on windows ie?
Not sure what is going on. I just wanted to test a few pages and see there is a problem. the home page has white vertical bars in ie. On mac no problems. I rebuilt the page and it still has the bars. The other pages in the site do not have this problem. Please help!
White bars on this page:
http://www.lombardikitchenandbaths.com/Lombardi/home.html
No bars on this page:
http://www.lombardikitchenandbaths.com/Lombardi/plumbing.htmlYou have a lot of detail on this page where all these frames/borders/mats and backgrounds to the images create a large number of PNG files. I would imagine that IE is struggling to load all these.
You can reduce the overall file size by taking a screenshot of each image with its frames etc and replacing each original with a single JPEG. See....
http://roddymckay.com/PhotoSatellite/OptimizeImageFile.html
Note that running your files through an Optimizer like Web SIte Maestro or WebCrusher will further reduce these file sizes.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
Newbie Problem, White edges when using colors?
Hi, I am new to illustrator, and this problem has been bothering me forever. I have googled beyond belief, but no answer. Maybe I am using the wrong terminology? Not sure. But overall, when I create things in illustrator, and use color, there are white edges around everything. Example below.
Also the colors I choose don't seem to be the ones that show up. Like, for the example above, I chose a deeper purple, but a lighter purple came out. I guess illustrator is A LOT different than photoshop.well, i recently had something like that too.
I just couldnt figure out why it was showing up.
Untill i began looking at the layers.
It seemed that somehow some layers got duplicated and stuff.
So i recommend that you have a look at your layers and check for unwanted duplicates. -
Why does my image not reach the edges of the page when printed, but appears fine as pdf?
Why does my image not reach the edges of the page when printed, but appears fine as pdf?
Check a printable area of your printer.
Make a (grey) rectangle that is larger than the paper size. Print it,
you'll get a message that some cropping will occur, that's okay. Then take a
ruler and measure the dimensions of the rectangle printed on the paper or
the white borders around the printed rectangle. -
I'm experiencing major synchronisation issues on ICloud, especially for documents created on my Mac in pages, keynote and numbers. Contacts and agenda items work fine. I checked all my account settings. But while I can upload documents from my MAC onto ICloud, they don't show on my IOS devices (whereas previously this worked without issues).
On this Mac I did move all the visible iCloud documents out of iCloud, into another folder, then disabled syncing, exactly as you suggested. But there were, apparently, documents remaining in my Mac's local iCloud store, "~/Library/Mobile Documents/" that I could not see (so could not remove). The Pages file "CSU-PD-UN1.pages" was one such document.
The act of disabling iCloud's document sync'ing, in System Prefs, just renames the local "iCloud" store to "~/Library/Mobile Documents/<appleid#>/" effectively shielding the it from the sync'ing mechanism. Looking at this renamed folder (the screenshot above) revealed that "CSU-PD-UN1.pages" (and other files) had not been removed; it would be reasonable to assume that one, or more, of these "undeletable" files were related to my original problem, and when I re-enabled doc sync'ing, those bad files would just clog up the works again.
So I deleted them with the Finder on both Macs (the other Mac had bad files too, but different ones), then re-enabling sync'ing on the two Macs and doc sync'ing between the Macs (and iCloud.com) appears to now work as intended.
Sadly, iOS devices (iPhone and two iPad) now do not sync at all. Newly created documents do not migrate to any other devices, and documents on other devices do to migrate to the iOS devices.
Your suggestions have certainly done some good, but something is now keeping my iOS devices out of the the iCloud doc sync'ing process. I suspect it's a similar problem as the Macs had ("invisible" files gumming up the works), so I'm going to apply some nasty tricks to explore the iOS devices file system and see if I can find them, and delete them by brue force.
Maybe you are looking for
-
How to pick up goods in sales order
While creating sales order by VA01 i am not able to pick the goods by using picking button. There is no error msg. showing but in the picked button its showing 0 . Am using 000 server in R3 4.7. pls suggest me how to solve the problem .
-
Go to the Apps and it shows it as installed and gives the "Open" button, but selecting this does nothing. The icon is nowhere to be found so I cannot uninstall and try to re-install. Anyone encountered a similar problem?
-
Need to add a link to the masthead area of the Portal
Hi I need to add a link to the masthead area of the portal. That link needs to be able to print the content of the current page. Ihave downloaded the com.sap.portal.navigation.masthead into the NWDS. Can anybody please let me know where exactly to mo
-
Itunes says ipad sync with other library but i downladed everything directly from the ipad.
hello, I downloaded all apps directly throught the ipad as I wasn't sure how itunes worked (i tried but couldn't). Now I'm trying to sync it and it say it is allready sync with another library and that I will loose all apps. I have all passwords but
-
Misuse of the "Edit Message" functionality in forums.
Hi, I have been observing for some time now that some users are actually misusing the option of editing their forum post. This is partly due to the fact that the time stamp for the message is not updated when the edit is done. It still shows the time