Create WiFi Hotspot with Command Prompt?

I was trying to create WiFi Hotspot on my Windows 7-32bit running laptop using the command promt method after followinng the instructions from here >> http://www.techswatch.com/2014/11/create-wifi-hotspot-windows-87-command-prompt.html However, the problem is, after creating the hostpot, when I enter the password it does get connected but I cannot access the internet. I am sure that I have entered the correct password else it wouldn't have got connected. Any idea what could have gone wrong or if I need to follow anything else? Any help would be apprecited.

I think it is better to use Wi-Fi creator to create WiFi in laptop. Search 160 WiFi in Google!

Similar Messages

How can i create wifi hotspot with WPA for windows laptops?

I using Macbook with Mac OS X Mountain Lion. I can't create a wifi network with WPA Protected Access. I can create with 40bit protection access but i can't with windows..

No, not unless Apple introduce it for the iPad 2 in a future iOS update - but until if/when that happens you won't be able to use it as a personal hotspot.

Create WiFi Hotspot using the command promt

I was trying to create WiFi Hotspot on my Windows 7-32bit running laptop using the command promt method after followinng the instructions from here >> http://www.techswatch.com/2014/11/create-wifi-hotspot-windows-87-command-prompt.html However, the problem is, after creating the hostpot, when I enter the password it does get connected but I cannot access the internet. I am sure that I have entered the correct password else it wouldn't have got connected. Any idea what could have gone wrong? Any help would be apprecited.

Hi ihtisham301,
Thank you for visiting Sony Community!
Try to connect any different device to your home network. If other device can't connect then you may contact your Internet Service Provided (ISP) for further assistance.
If other device can connect, then try to isolate the issue. You mentioned you cannot connect to the network but you were able to enter the credentials before connecting to the network. Try to ping any website, Start -> search cmd -> once in command prompt, enter ping googe.com and hit Enter. Check the Ping statistics. Try to ping your router as well. ping [router IP address] then hit Enter. Also boot the laptop in Safe Mode with Networking -> turn off the laptop, press the power button and immediately, tap the F8 key repeatedly. Once in Advanced Boot Options, select Safe Mode with Networking.
I'm not quite sure about the process that you did. I never tried that before. And another thing is, it seems that you are using a non-U.S. model of Vaio. We usually have Windows 7-64bit computer. We have limited information with non-U.S. model of laptops.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope my suggestions help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

How to create adhoc Wifi Hotspot with iPhone to connect Apple TV for Mirroring and Airplay?

I don't want to use my iPhone to share or tether my iPad or laptop etc. with my cellular data plan.
What I want is to create a hotspot with my iPhone (or iPad) so that I may connect my Apple TV to the adhoc network so I am able to stream video and music from my iPhone to the Apple TV.
I do presentations in front of live audiences and want the ability to mirror my iPad or use Airplay to stream video and photos to the Apple TV without connecting to a public WiFi network.
The apple TV is so small, I just tuck it into my bag with an HDMI cable and I am able to tap into LCD projectors and flat screens and use keynote or video from my iPad so my audiences can see my presentations.
Seems pretty simple. But I cannot activate a hot spot on my iPhone without signing up for AT&T's service. Fact is, I have no need to tether my iPhone or iPad, I just want to create an adhoc Wifi network solely for the use of my Apple TV.
I posted this question to the iPhone discussions as well, but thought someone here has wanted to do the same thing.
Someone suggested just bringing any WiFi router and connecting devices to that. But that's not a solution. It's about mobility and simplicity and not creating a larger footprint.
Thoughts?

I am a presenter and I do what you want to do. I use an apple tv as the presentation device that connects to the projector. The thing that makes it all work together is the Apple Airport Express $99 and looks just like the APple TV but white: http://store.apple.com/us/product/MC414LL/A?fnode=MTY1NDA0Mg
Basically you define a wireless network ahead of time (using your iPad or iPhone and the Airport Config App) and let your iDevices connect to it and know the details ahead of time (so they will auto connect later).
You have a couple of options of connecting the airport express to the apple tv. I basically stacked them and used an ethernet cable but you can define the wireless connection also. I then strapped them to the projector (which I travel with) and used an HDMI cable from the apple TV to the projector.
Sometimes I present from my iPad...sometimes I present from my iPhone. Sometimes I present from my iPad but use the remote app on the iPhone to see the next screen. Now with Mountain Lion you could even present with a Macbook Pro (not needed though)
Wanna hear the coolest thing? When I want to demo something on the iPad instead of just showing the screen remotely using Airplay I use an App on the iPhone called Air Camera directed down at my iPad screen. The Air Camera sends the video to the Apple TV using Airplay and people are able to see my taps by seeing my fingers.
Another cool thing in a classroom setting with other iPads you are able to let people know your Wifi password and then display their iPad screen up on a projector to ask a question about something or demo something.
So for the extra $99 dolars for the Airport Express and a few minutes setting it up, wammo you have it!
One last note. If you actually do have wired internet at the podium you can connect it to the WAN port of the Airport express and all your iDevices would in addition have internet access. If you need internet access for all the devices and you are presenting in a place without internet then you have to bring a wireless hotspot in place of the airport express. This works equally well (again just setup the connection from the iDevices to the wireless hotspot ahead of time)
Have fun and good luck!

Can t create wifi hotspot

Before update to mavericks, sometimes can't create wifi hotspot on my macbook pro 2010 MID . It solved by turn on and turn off wifi few times.
After update to mavericks , the only way to solve it was reboot.
Anyone had a similar problem? THANKS

Hi Julianchan94,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
- Judy

How can i use "phone relay" on a iPad mini over iPhone created wifi hotspot?

How can i use "phone relay" on a iPad mini over iPhone created wifi hotspot?
It works nicely over home wifi, but for example, i am sitting in my car, phone is in my pocket and I'm using the iPad, call comes in and i don't want to start digging for my phone.
Is there any way?
devices:
iPad mini cellular (no SIM card at the moment)
iPhone 5S
Thanks!

well yes, but it basically makes wifi for the other devices, it basically mimics wifi.
as i get from your answer, it is not possible?
it would be common sense to make it work this way also. directly from device to device. no bounce between WiFi router
Then again, common sense is not that common these days...

Can I Create A Hotspot With My iPhone 4 To Use For iPod Touch?

I'm considering signing up for the tethering plan with AT&T.
My main purpose would be to create a hotspot for my iPod Touch.
I use my iPod Touch at work using Keynote. I would like the ability to download my Keynotes via Dropbox on my iPod Touch.
Can I create a hotspot with my iPhone 4 so my iPod touch would have access to the internet?

Yes.

How to create create oracleserviceSID manually through command prompt

Hello Experts ,
We want to create oracleserviceSID manually through command prompt in our BIW 3.5 server based on oracle 9.2 . wts the procedure of create this oracle service manually . Requested to revert at earliest as this is very urgent .
points guaranteed .
Regards,
Somya

hi
i guess that your q's is how to create oracle service source id if the system is already connected to your BW server?
to assign the source id to the source system goto tools in your DWB->assignment of source id to source system->assign the SID there
to create a new one press F5 from the same screen & give the logical system name.
check
SAP Note 518241 for establishing the connection

-Xlint warning when compiling with command prompt.

1 of the method i write in the program has a compilation warning when compiling with command prompt. When i compile the codes with the application i used to write the program has no error at all. Below is my code:
private static ArrayList readNum(String NumFile)
ArrayList key = new ArrayList();
String keyAttributes = readInput(NumFile);
StringTokenizer stk = new StringTokenizer(keyAttributes);
while(stk.hasMoreTokens())
key.add(stk.nextToken());
return key;
When i javac the program with -X;int, this errror occured:
warning: [unchecked] unchecked call to add(E) as a member of the raw type java.util.ArrayList
key.add(stk.nextToken());
^
1 warning
Anyidea how to solve this problem? Thanks for the help.

A quick google for that message would have told you that you're not using generics and the compiler complains about that.
Google for "Java Generics" to find out what all the fuss is about.

Lenovo has different F8 screen, can't get to safe mode with command prompt - account locked out

Thinkpad W500, Win7Pro. Can't login: "the referenced account is currently locked out and may not be logged on to". I need to boot to safe mode with command prompt to enable the Administrator account (disabled by default) with a "net user administrator /active:yes" command, but Lenova has their own recovery and interfaces which are preventing me from accessing with normal windows techniques. I either need to be able to get a command prompt on the true C: drive, or reset this lockout situation, and fast... Waiting more than 180 minutes did not work, and using system restore is not an option-key software patches and additions make this very unattractive, and I know how to do that.
Optional Information:
Computer OS: Windows 7
Browser: IE
Already Tried:
-ThinkVantage button (reg and advanced views) -a boot disk for pwd reset program (I know password, but I am locked out - didn't help) -F8, Repair options and all safe modes -NOT system restore, as we are trying to not undo months of software revisions - we just need to login!

If we take the error messages seriously, then probably the first thing that you would have to do would be to replace the malformed library:
/System/Library/Frameworks/Security.framework/Versions/A/Security
If you have another computer with the same operating system, you could connect via target disk mode and copy over the good library to replace the bad one. I don't know if this library is different between 10.2.6 and 10.2.8. If the library were fixed, that might solve your other problems and it might not. There is no way for us to know.
Alternatively, you could do an archive and install.

Issues with creating a wifi hotspot with Macbook Pro

Hello. I am staying in a hotel with others for an extended period of time. There is only one ethernet port. I have previously used the ethernet via internet sharing to turn my macbook pro into a wifi hotspot. I went through the steps this time (checked, double-checked, and triple-checked via various websites), and though my computer says that it is broadcasting, AND all the other devices (iPhones, other laptops) can see and connect to the network, no internet seems to be coming through the broadcasted connection.
What I mean is, the network exists, and when others connect it shows full signal in their airports, etc, but they still can't connect to the internet. Pages won't load, my iphone tells me that it's "not connected to the internet" even though it has full wifi bars. Is there some important step that I'm missing? I am running Snow Leopard.
When I did this before, I feel like there was some other strange option I either had to enable or disable, but that was a long time ago and I can't recall. Right now, I just go into internet sharing, set "ethernet" as broadcasted from, and "airport" as broadcasted to, then I name the network and click "Start" and everything seems to work, except for the not actually being connected. Can anybody explain this?

I can indeed get on with just my Mac, as can my roommate (he also has a Macbook Pro). I have not tried turning off my firewall. That may do it. However, I do not know how to turn off my firewall. I could just google it, but I figure I'll ask y'all anyway.

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Unable to create wifi hotspot on MSi GT70 2OC

Hi,
My laptop has killer wifi n1202 card. I tried to create a wifi hotspot on my laptop but it doesn't work.
I tried every available software on the net and tried to create without software also through command prompt.
But nothing seems to work.
Has anybody faced same problem and has a solution for this ?

Apparently do do not know quite what a WiFi hotspot is. You don't create one on your computer you can access one if there is one in the vicinity of your computer. Read this for better understanding:
http://en.wikipedia.org/wiki/Hotspot_%28Wi-Fi%29

Create theme path using Command prompt & telnet?

Hey guys I want my SMP to display linksheets. I have the latest firmware installed. I have been successfully running GBBM off of a usb (using the latest wdlxtv firmware) & my linksheets display fine. However, some films stutter & pause when using wdlxtv (they play fine when I unplug the usb stick & run the official firmware). So my aim is to change the theme path so that GBBM is booted from my usb stick & I can display linksheets but I will be using the official firmware. I have been following this guide found on the forum: http://community.wd.com/t5/WD-TV-Live-Streaming/Getting-around-the-30MB-theme-limit-and-repointing-the-SMP-to/td-p/631463 After attempting to set the theme path I reboot my SMP but it is still at the default theme.
When I look under 'appearance', it states my theme path that I entered in Command Prompt.
I think that I may be entering the theme path slightly wrong.
My USb is identified as: /tmp/media/usb/USB210/4489-F8EA
The folder that I created on my USB was: wdtv_themes
So I assumed my theme path would be: config_tool -c THEME_PATH=/tmp/media/usb/USB210/4489-F8EA.wdtv_themes
However, this doesn't seem to work.
Any help?

this is all over my head, but KAD79 is about the only person that could help you with this but i did notice one thing, the path is missing a missing forward slash ? bird06 wrote:
My USb is identified as: /tmp/media/usb/USB210/4489-F8EA
So I assumed my theme path would be:config_tool -c THEME_PATH=/tmp/media/usb/USB210/4489-F8EA.wdtv_themes config_tool -c THEME_PATH=/tmp/media/usb/USB210/4489-F8EA/.wdtv_themes

Connect iPad 2 wifi to wifi hotspot with joikuspot

I installed joikuspot light in my nokia E71, and my iPad recognized the wifi hotspot but I still can't access Internet. Pls help

I also had the same problem, but I realized this person (Baltax) who shared in this forum how to resolve this issue. He is a god-send.
http://www.philmug.ph/forum/archive/index.php/t-72362.html
06-13-2011, 08:54 PM
Had the same problem; I connected with the device but couldn´t browse internet. Turned out to be an encryption issue; to make it work I used (in the settings for Joikuspot) WEP open, ascii, 128 bit, and let Joikuspot create the password for me. Using this it worked flawlessly.

Create WiFi Hotspot with Command Prompt?

Similar Messages

Maybe you are looking for