Create wifi link from macbook pro

I am wondering if there is a way to send a wifi signal from my macbook pro so I can use my iphone wirelessly in my hotel room. The laptop is connected by an
ethernet cable provided by the hotel and gets a good connection.
Thanks,
Steve

Thomas,
Thanks for the response, however, when I click on Internet sharing the choices on the right are 'ghosted' out and I cannot select "Share the Ethernet over Airport."
Thoughts?
Thanks,
Steve

Similar Messages

I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other

I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other.
Any ideas?
Barry

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

Create the internet network from MacBook Pro (Aircard) to iPhone and iPad

I would like to create the internet network from MacBook Pro (that used Aircard) to iPhone and iPad. I already turned on the internet sharing, but could not create the internet network. Please let me know how to solve this problem.

Couldn't you attach your iPhone to your computer and upload and add your iPhone Contacts to your iTunes Contacts and then sync the iPhone? Add one unique contact and calendar entry to your computer. You should then get the option to merge.

Internet Sharing from Macbook Pro to iPad???

Trying to get my wife's iPad to connect to the internet in a hotel that has wired high speed internet but no wifi.
My MacBook Pro connects just fine. So I turned on Internet Sharing for both Bluetooth and wifi (with WEP password for wifi).
The iPad connects to the Mac by wifi but says it has no internet connection.
With Bluetooth, it pairs OK. The Mac sets it up as serial port sharing (no other choice offered, but within that there is a choice of modem or RS232 protocol). But when I try to connect it connects momentarily then disconnects right away.
Any suggestions on how to let the iPad get at the internet in this situation?

I am still not succeeding.
I just upgraded to a new Macbook Pro with Mountain Lion. Testing at home, where there are no issues around hotel ISP limitations and I feel pretty safe originating an open wifi network for a few minutes.
Set up Internet Sharing from Ethernet to Wifi. Used the Create Network option for wifi in the menu bar to set up an open unprotected wifi network whose name is the name of my Mac. I can choose any wifi channel from 1 to 11; it makes no difference.
I can see that network from my wife's iPad, and can connect to it no problem. But as in all similar tests since Snow Leopard came out, Safari in the iPad can't open any web sites; it says it is not connected to the internet. I can also connect to the MBP wifi from my iPhone, but if I select it, the 3G symbol still shows at the top of the screen because the phone cannot find an internet connection over that wifi.
Clearly some other people are managing to do what I cannot. Quite possibly some piece of third party software on my Mac is interfering. Little Snitch, for example, though it is currently turned off.

Hello I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for. i plugged in the

Hello
I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.
i plugged in the external drive to start the migration process after entering her name and username from the old machine which gave me the options on transferring the old data over.
I also unchecked the Administrative end that had my info hoping that ONLY her data, files, etc., would be the ones sent over to her new machine which I wanted her to be the ONLY Administrator for. All went like clockwork until the restart.
Normally the screen should show the username and only need the password but both entries were blank, as in ‘Other’ sign in option available only. I entered her name and password, nothing….used her username and password, nothing. Used my old Administrator name and password, NOTHING!
I tried defaulting to factory settings from the Restore feature but it directs me to notify Apple. I tried in Terminal to change the password, nothing. I tried to boot from MY external drive and it doesn’t recognize it. I tried to even use my external drive which actually has the Mavericks upgrade, nothing!
Basically I can only get the startup screen which isn’t accepting the username/password or the Restore feature which doesn’t offer any options helpful!
Please, how do I start from scratch and start over here? Or simply change the Administrator name and password so I can proceed with everything thats already on there? I wish I could even boot from another drive but no luck on anything!

First, on the old machine, make your wife's account an admin one. Log into it and delete yours. Then, update the TM backup. Finally, use Internet recovery mode, ⌘⌥R, erase the HD, and restore the OS. One first boot, follow the steps outlined in Pondini's Setup New Mac guide.

How to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

how to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
or, you can read the link below on how to do it in dos mode.
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
once you've formatted it - you can now use it in both your macbook and windows computer.

How to sync photos from MacBook Pro to iPad 3?

How to sync photos from MacBook Pro to iPad 3 without it automatically deleting previously synced photos, or replacing them with new ones?

How can I create albums in the Photos app on the iPad
Photos that were taken with the iPad (or any photos in the camera roll) can be deleted right on the iPad. Tap the trash can icon in the top right corner if you are viewing the pho,to in full screen, or if you are viewing as thumbnails - tap the arrow in the upper right corner - tap the photos that you want to delete and then tap - Delete.
Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced - and then re-syncing.

Printing from Macbook Pro to HP Photosmart Plus B210a

Hi,
I am experiencing difficulty in printing documents from Macbook Pro to HP Photosmart Plus B210a. This has only been a problem for the last 2 weeks.
I think this may be due the most recent update of OS X Mavericks 10.9.3.
I have tried to update printer drivers from HP web, and it indicates that the printer in connected to my network router, and I have been able to run a testprint to the printer.
However when I try to print any documents the print queue seems to be trying to print, but never actually generates an output document.
I am looking for any advice/guidance on how to solve this printing problem.

Hi Eric,
i note that 10.9.4 is Mavericks.I cannot link directly as it is a wireless printer.
I have tried using the Terminal app, and typed the command as you indicated and i got the response attached.
IAIN-HERCUSs-MacBook-Pro:~ iain1$ ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69): 56 data bytes
64 bytes from 192.168.1.69: icmp_seq=0 ttl=255 time=6.941 ms
64 bytes from 192.168.1.69: icmp_seq=1 ttl=255 time=5.657 ms
64 bytes from 192.168.1.69: icmp_seq=2 ttl=255 time=3.769 ms
64 bytes from 192.168.1.69: icmp_seq=3 ttl=255 time=4.136 ms
64 bytes from 192.168.1.69: icmp_seq=4 ttl=255 time=4.226 ms
64 bytes from 192.168.1.69: icmp_seq=5 ttl=255 time=4.219 ms
64 bytes from 192.168.1.69: icmp_seq=6 ttl=255 time=4.699 ms
64 bytes from 192.168.1.69: icmp_seq=7 ttl=255 time=6.325 ms
64 bytes from 192.168.1.69: icmp_seq=8 ttl=255 time=4.570 ms
64 bytes from 192.168.1.69: icmp_seq=9 ttl=255 time=4.493 ms
I found that had to break this process. i don't know what this tells you with regard to the status of the printer connection.
Please let me know what I should do next?
IDH1

Direct link from Premiere Pro to Speedgrade won't open and stops at the post processing bar.

I've just installed the new version of Speedgrade and every time I try to open a direct link from Premiere Pro to Speedgrade, it opens and starts to load, but when the post processing bar appears it stops there and doesn't open, I've gone back to the original versions of both programmes and that same thing happens, HLEP!

Hi Vinay,
1. I am using third party plug ins, and I understand that might be causing an issue, but I've also tried opening a new project with nothing in it at all, and that won't open.
2. Premiere Pro quits after the project loading bar or after I create a new project.
3. I used a lot of files! mov, mts, psd, ai, png, jpeg, and AE compositions through dynamic link.
4. The project has about five sequences. They range from 1 minute to 4 minutes.
Thanks!

How to uninstall 3rd party app from MacBook Pro?

Does anyone know how to uninstall a 3rd party application (RMSViewer) from MacBook Pro? The app doesn't work and I want to remove it from memory. I can't find an "uninstall" utility on my computer and the 3rd party software doesn't include an uninstall link.

Tap and old the app until it starts to wiggle. Tap the "x" that appears on the corner of the icon.
If that doesn't work, check Settings>General>Restrictions to see if removing apps is restricted.
You may also want to take a read through the manual:
Apple - Support - Manuals

How to add my video library to iPad g3 from MacBook Pro?

How to add my video library to iPad g3 from MacBook Pro?

What sort of videos are they, and what app do you want to sync them to ? If they were taken with your camera and they are in a format supported by the iPad, then you could sync them to the Photos app - with the iPad connected and selected on the left-hand side of your computer's iTunes, you can use the Photos tab on the right-hand side of iTunes to sync photos and videos (there is an 'include videos' tickbox on that tab) to the Photos app.
Or you can sync them to the Videos app. If you can add them to your iTunes library (File > Add To Library) you can then use Movies tab (instead of the Photos tab) to sync them to the Videos app. If you can add them to your library but they don't sync over because they aren't in a supported format then try doing Advanced > Create iPad Version and then try syncing those versions.

HT204023 Is it safe to make a wifi hotspot on macbook pro?

Is it safe to make a wifi hotspot on macbook pro. Can't it do damage on macbook pro?

Yes it is safe if you only download direct from Adobe.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.

How can i stream media wirelessly from macbook pro ? video...

how can i stream media wirelessly from macbook pro mountain lion to dynex bluray player or insignia mhl tv? i also have a time capsule...

most reliable method found is get an AppleTV hooked to TV, and get program called BEAMER (free trial or $15 purchase application). Lots of programs CAN stream to TV via wifi, but many of them get audio syncing wrong/bad. Best addition upgrade to any Apple PC or laptop isnt internal, but the AppleTV BEAMER app is the best Apple/Mac app out there to me, ... Ive got 7 Terabytes of Videos, ...the Beamer app takes in any video format, its just incredible.

Nas can not access secure parts from Macbook pro

Black Armor 220 nas can not access secure parts from Macbook pro, although access sucess Public parts (no password), is any setting in Lion or else needed setup?
Late 2006 model , 15'

is any network sharing files Setting for secure files sharing in a NAS(wifi with mac via internet gateway), or to be able access Public files (but not secure), the password must be the problem?

I tried to remove Trovi from macbook pro but it doesnt go away

I tried to remove Trovi from macbook pro but it does not go away. Trovi opens right away

How to remove Trovi adware from Mac - MacSecurity
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Create wifi link from macbook pro

Similar Messages

Maybe you are looking for