Created 2 slideshows, but only 1 works??

Hi there
I have created two slideshows, but only one works. I have
reverted back to the tradisional tile layout of images of the one
that does not work, but that is not what my client wants.
The one that works can be viewed at
Catering
The images of the one that does not work can be viewed at
Gallery
I am using the same player in both cases. I have tested both
on my laptop using all browsers I could think of. After I FPT'ed
the files to the hositng server, the Gallery does not display
anything in the "Image Viewer". Thumnails, headers, etc are
displayed.
Any suggestions? I am at a complete loss.
P.S.: I am using Fireworks and Dreamweaver CS3.
Many thanx

Check these out:
iPod Does Not Appear in My Computer
iPod Appears in Windows but not in iTunes
I hope this helps!

Similar Messages

  • I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

    I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

    I think that is happening is that the microphone is on during this recording.  If you play the music through the iPhone speakers, it will record this sound, albeit at very poor quality.  If you say anything (or laugh uproariously as I did while watching the app in action, then that, too, get recorded.
    I am still looking for the solution we all want, which is to save the audio in reasonable quality.
    Anyone out there with some ideas?
    Cheers,
    Rob

  • HT1380 i have an ipod touch 4th gen and ipod touch 5th gen is there a univeral adapter/dock that can work for both? i have recently bought a Sony speaker clock radio but only works with ipod 5th gen, i need an adapter for the 4th gen, is there one on the

    I have both the ipod touch 4th and 5th gen, i recently bough a  speaker/dock but it only works for the ipod touch 5th gen? Is there an adapter that I can use to attach the ipod touch 4th gen to the docking system? 

    bobjbkln that only work if the dock has the 30-pin connector
    bobjbkln wrote:
    How about this lightning female to 30 pin male cable? http://www.miniinthebox.com/lightning-female-connector-to-30-pin-male-connector- cable-15cm_p693543.html

  • Firefox 4 Beta (v9,10&11) opens on my PC (Win 7) and creates tabs but only the close button works I cannot click on any tabs or content in the "active" tab?

    It looks like Firefox has started ok, all the tabs are populated, but nothing can be accessed by clicking except the Close button and the right hand scroll bar... it is frustrating. Firefox 3 works fine still.

    Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
    * http://kb.mozillazine.org/Testing_pre-release_versions
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • App created with DPS only works while on WIFI

    I have created an app in InDesign and went through all the steps to create an .ipa. I then loaded it onto my ipad. The app works fine on the iPad only went it is connected to wifi. Once I disable any connection the animations in the app do not ever load. and I end up with blank spaces where there should be an animated image or such.  Does anyone know why?
    Thank you!

    Thanks for asking Bob.
    iPad is running 5.1.1
    The version of the folio is 24
    Another thing that I have realized is that I did create an animation in Adobe Edge Animate and I used the .html that Edge created in the InDesign Doc. When I created the app, it is this animation and only this one, that works on the iPad app when it is not connected to WIFI.
    Any more thoughts?

  • Ability to create GPOs, but only link them to specific OU

    Hi guys,
    Running a 2008R2 domain.  I need to delegate the permissions to create new GPOs to a specific account, but I want that account to only be able to link them to a specific OU.  I know how to delegate the link permissions to specific OUs, but
    not how to delegate permissions to create GPOs without making the account a member of Group Policy Creator Owners which would give it ability to edit other GPOs.  If anyone knows a way I can delegate permissions to create new GPO(bot not edit existing
    GPOs), please let me know.  I was checking the User rights Assignments in the Default Domain Controllers Policy, but not seeing the ability to add a user in there.
    Dan
    Dan Heim

    Hi Dan,   
    If you want to delegate permissions to create GPOs, you can refer to the following steps:
    1. Open Group Policy Management.
    2. In the console tree, click Group Policy Objects in the forest and domain for which you want to delegate creation rights for Group Policy objects (GPOs).
    3. In the results pane, click the Delegation
    4.Click Add.
    5. In the Select User, Computers, or Groups dialog box, click Object Types, select the types of objects to which you want to delegate creation rights for GPOs, and then click
    OK.
    6. Click Locations, select either Entire Directory or the domain or organizational unit containing the object to which you want to delegate creation rights, and then click
    OK.
    7. In the Enter the object name to select box, enter name of the object to which you want to delegate creation rights by doing one of the following:
    ◦ If you know the name, type it, and then click OK.
    ◦ To search for the name, click Advanced, enter the search criteria, click Find Now, select the name in the list box, click OK, and then click OK.
    Based on my test, after delegating creation of GPOs to a user by following above step, the user will not have permissions to edit the GPOs that are not created by himself.
    For more detail information about delegating creation of GPOs , you can refer to the following link:
    Delegate creation of Group Policy objects using GPMC
    http://technet.microsoft.com/en-us/library/cc739363(v=ws.10).aspx#BKMK_Addgroup
    Best Regards,
    Erin

  • Windows Server 2012 , File Share, need to create CNAME but not working

      I'm doing a file server migration for an old Netapp and I'm moving all the data to a Windows Server 2012 Standard System.  I need to be able to have 3+ cnames for the system so I don't impact existing clients.  I have read the below
    articles and none of them are working. 
    Currently I'm getting the following error 
    "The Mapped Network drive could not be created because the following error occurred"
     "The target account name is incorrect"
      So I have tried the following without any luck, and these fixes below are supposed to work on Window 2008R2, but they don't on Server 2012
    1) use DisableStrictNameChecking registry value
    2) use netdom to create another hostname that is bound to the server,  netdom computername (mysystem) /Add (newsystemname)
    3) I used setspn to create an alternative name for the system
    4) tried disabling SMB3
    Any help on this would be greatly appreciated, I'm sure this is possible just down know now.
    Jason

    Why don't you just go into DNS and create multiple records for the same IP address?
    Or, if you like trying more complicated paths, install DFS and use its distributed naming capability.  It can have many, many different names.
    .:|:.:|:. tim

  • N580 Says Battery 80% Charged But Only Works if Plugged in

    My IdeaPad N580 says the battery is 80% charged, but it won't work unless it's plugged in via the power supply.  How do I fix this?

    make sure it's charged. If you're charging via USB and your computer make sure your comptuer doesn't go to sleep. Most computers cut power to their USB when they go to sleep.
    If you charge it and it still won't work, contact Zagg. I've found them to have good customer service and they'll probalby exchange your device.

  • Packager Created App Doesn't Work On iOS 3.1.3

    I compiled an app from Flash CS 5.5 and tried installing through iTunes and I get an error saying a newer version of iOS was required. It seems odd that the packager doesn't support older iOS versions. Will I have to install CS 5 in order to get iOS 3 compatible apps?

    If you want one app to be able to work on old devices, but live with the older features and performance, and another version that uses the new features, and better performance, but only works on newer devices, then yes. As the new version would also allow you to use the Retina display, you could perhaps call it "HD", or something else that's different to explain why there are two different iPhone versions of the same app.
    If you currently have an app in the store that you're trying to update, then it will have to keep the old features and performance, you're not allowed to upload an update that drops support for devices that the earlier version supported. So again, you could have a new app that is named differently, that doesn't support the old devices.
    Any of the people who bought your earlier app and now want the new better performing Retina version, would have to pay again. You might think about having an incredibly good intro price, just so as to not upset those people too much.

  • IPhone 4: lost contacts!  Restore from Backup only works for 30 seconds after restore job, then contacts disappear!

    The last time I backed my phone up, my contacts disappeard.  So I went back in and "restored from backup."   When the restore job finished, I opened up my "recent calls" and the names of my recent callers appeared for about 30 seconds and then they turned back into phone numbers.  No contacts appear in my contact list. 
    I called apple-care and all they're interested in is trying to get me to give them money. 
    I tried free support from this website but the person on the other end was clueless...utterly clueless....did not even understand what I meant when I uttered the phrase "restore from backup."  I had to take him through the process I had just gone through step by painstaking step, and all he could do was ask me why I didn't have my contacts.
    Is there anyone here whocan help with this? 
    PLEASE...help me. 

    Wjosten,
    You are absolutely correct, they are very much apart of the backup.  I lost all my contacts and did the same thing as you, restored a previous backup.  Upon completion of the restore, all my contacts were there.  Like you, after 30 seconds, mine too erased.  I tried to mess with iCloud with no luck, after re-establishing connection with either wi-fi or cellular, my contacts erased.
    I tried several times and was able to finally get my contacts copied over from the restore, here is how but only works if you have the restore available with the contacts still present.
    1. Restore from the previous backup (you must watch your phone because you have to be ready for the next step)
    2. When your phone restarts, immediately place your phone in "airplane mode" to stop it from connecting to the cloud and wiping away your contacts.  (Your contacts will remain until airplane mode is turned off)
    3. Within iTunes, search for and download "My Contacts Backup" which is FREE and does not need to connect to the Internet to work.
    4. Within iTunes, under the iPhone, navigate to the App's tab and find "My Contacts Backup" and click the install button to have it installed onto your phone.
    5. After installed, run the "My Contacts Backup" and follow the prompts.  Do not change any settings, they are already properly set up.  After it copies all the contacts, it is ready to e-mail out.  Email them to an address you can get on your phone.
    6. Turn off airplane mode (this will delete the contacts as said above but we have a backup.)
    7. Open the e-mail and click on the attachment.  Follow the short steps and all your contacts will re-populate.
    If you are like me, this fix also took care of my iMac and iPad contacts.  I have all 400 contacts back.  I hope this helps if you haven't found a fix or anyone that finds this page in the future.  While trying to fix this, I stumbled across software that was over $100.00 to fix this problem.  This is the free way
    FYI - I had the iPhone 5 running 6.0.2
    Good luck,
    Reed

  • I think something is wrong with my battery. Only works when plugged in.

    My battery says its fully charged but only works when I keep it plugged in. I was using it yesterday and it just shut off randomly and started this stuff. I have no idea what I should do. Help?
    It's a 2007 black MacBook if that makes a difference.
    Model Information:
      Manufacturer:          DP
      Device name:          ASMB016
      Pack Lot Code:          0002
      PCB Lot Code:          0000
      Firmware Version:          102a
      Hardware Revision:          0500
      Cell Revision:          0102
      Charge Information:
      Charge remaining (mAh):          4158
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          4186
      Health Information:
      Cycle count:          489
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12504

    Even though it says Normal the Cycle count is well above the 300 considered the maximum for the battery. Plus your Amperage is at 0.
    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • How do I create photo album folders or files ? As it stands, ihave some 500 pics saved but only want to play some of them for a slideshow presentation?

    How do I create file folders or photo albums to save photos in specific designated area for subsequent playback as a slideshow. As it stands, I have approx 500 photos in new I Pad 2, however need to only play about 30 in a slideshow. Thank you

    For the Photos app you need to put the photos into different folders on your computer and then sync those folders to the iPad - you need to sync all the photos that you want on the iPad in one go, as only the most recent photo sync remains on the iPad. There are third-party apps that you can copy photos to on the iPad which I think might allow you to do slideshows, but I havn't used any of them.
    With iOS 5 in the Autumn you will (assuming that it makes it to the final release) be able to (from http://www.apple.com/ios/ios5/features.html#photos) :
    Even organize your photos in albums — right on your device.

  • LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

    LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

    Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

Maybe you are looking for