Created a 20 page fill-in the blank form with livecycle 8.0 and now page 20 needs updated.

Created a pdf with acrobat 8.0 and used livecycle 8.0 to create a fill in the form document. Now that I am at page 20, the lines i put in for a description for people who still use a typewriter should have been taken out for this document. Is there any way to replace this page with a revised pdf page. When I open the document in aapro and select document the insert page is not highlighted. I know I have deleted and inserted pages before, but not one that went into livecycle. Can it be done or do I have to start all over again?

Since this PDF is based on a LiveCycle Designer template individual pages cannot be removed. Can you not just go back into Designer and remove the page you don't want anymore and add in a new one?

Similar Messages

How do I create a fill-in-the-blank forms

How do I create a fill-in-the-blank forms in Pages 5

Pages does not do it like Word, best you can do is tab over a space and leave that space for the user to type into.
Perhaps putting a small label under to indicate what is required.
A fill in the blanks form made in Pages however really defeats the point.
Who out there has Pages, particularly whatever incompatible version you are using?
Pages has trouble opening Pages files thanks to Apple.
Use standard file formats either pdf (created in Pages, turned into a form in Acrobat Pro or their website) or Word .docx.
Peter

XI Pro, fill in the blank form

Using XI Pro, I know the "fill in the blank" form can be emailed and completed. Can the form be embeded on our website and still maintain the "fill in" ability?

Sort of. It depends whether the visitor uses Adobe technology to view your site. Increasingly people use browsers like Chrome or FireFox, the latest Mac Safari which ignore Adobe technology in favour of their own. No problem except that these typically don't do forms, or worse seem to do forms but leave things broken.
It's hard to recommend PDF forms for a general web audience.

How can I make a fill-in-the-blank question with partial score?

I need to make an evaluation test with some questions. Some of them is a fill-in-the-blank question and it has to have partial score.
I have:
4 fields (text entry boxes) with: retain text, validate user input;
also checked include in quiz, with points, add to total and report answers;
an action that disables the 4 fields when the student is on review mode (otherwise it would be possible to change the answer after submitting the answers);
Problems:
I can't give feddback to the student: if i turn on success/failure captions the student will see them while answering, if i turn them off he wont know what's the right answer. I tried to use a shape to hide captions but the captions are always in front of the shape;
When reviewing the test something happens and the second time we see the results slide it assumes that the fields in the FIB question are empty;
Notes: it will be used in Moodle, as a scorm package
What can I do?

I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

I bought an iPhone charger 3 months back its covering has torn out again. I had the same problem with my previous chargers and now this has started getting on my nerves. Why do your chargers suck so much, and why on earth don't do you guys anything?

I mean seriously, stop working on your earplugs and look at the cheap quality of your chargers. I'm really really disappointed with apple. I have always loved apple and been an i-gadget freak but your chargers just bring my spirit down. GO WORK ON YOUR CHARGERS AND MAKE THEM STRONGER. Because even you know that apple's going down now and if you still have these shrude means of giving away cheap chargers so you can make more money (by making people replace them every once in a while) then you're gonna fall down to the ground because there are better phones and you have competition.

If you would like to tell Apple about you're issues click here - http://www.apple.com/feedback/iphone.html

My iphone has the new update and now my itunes needs updated but when I try to do that I need another update and another update and so on, what should I do?

10.5.8 software and when I click software update nothing comes up. Im lost.

You have to understand the difference between an Update and an Upgrade.
An Update is a free change within an existing Operating System. Such as the .8 added to 10.5.
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 code was written to be able to run on both Power PC and Intel. 10.6 has completely rewritten code and only runs on Intel Macs.
You have to upgrade to 10.6.8 to be able to download iTunes 10.7. The Snow Leopard 10.6 DVD should still be available at this time from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

How do I create a "fill-in-the-blanks" worksheet?

I am a teacher that works with students who have various needs - some of them have a difficult time writing with a pencil. There are tons of great teacher resources out there that I can print and use for students to write on. However online worksheets are another story. I came across the idea of using AdobeForms as an adaptation to writing.
For example...
Yesterday was _____________________. Tomorrow will be _________________.
Or even:
My n__me is _____________.
Can anyone help me? Right now the only way I can do a fill in the blank is to have a field below a blurb of text, but I don't know how to do a field in between text.
Help!

If I were doing this I wouldn't use FormsCentral. I would create the layout in InDesign or a word processor and convert to PDF using Acrobat. I'd then add the form fields in Acrobat where the blank spaces are. You can limit the number of characters in a field and a lot more. Do you have Acrobat available to you? If not another option is to use the free OpenOffice /NeoOffice and create your layout and form fields and then export to PDF.

How to create a fill in the blank program?

Hey everyone,
So I am working on a new program that requires a fill in the blank section. I am loading the data via xml as a paragraph, but what I am wondering is how to take this data and make a simple fill in the blank section where if it is right, it turns green, if its wrong, it turns red. Any ideas? All help is greatly appreciated!

Hi Linda,
I will try this.
I tried too.
I started with a blank Page Layout document in Pages (File > New From Template Chooser... > Page Layout > Blank > Blank Canvas.
I added four Text Boxes to that blank canvas:
In my example, the Text Boxes all have black outlines for clarity in that screen shot (select the Text Boxes, then in Inspector > Graphic > Stroke > Line and set the line style, colour and width).
Then File > Print...
and on the bottom left of the Print dialogue:
Save with a suitable document name in a convenient location.
Then open that PDF in Preview and type the word DoubleClick in each user field:
Double clicking will select that "word" and it will act as the Place Holder Text that Peter referred to. The user can begin typing to replace that "word".
Please be aware that this PDF is not a locked form with fields that users can enter data. Here, I show how to select (and possibly vandalise) the Name box:
It all depends upon how well you can trust your users!
Regards,
Ian.

Issue with fill in the blank field and back button.

I am working in CP4 AS2. I have create a page of fill in the blank fields to simulate filling in a form. On the next slide, I show the answers by extracting the variables into text boxes. I have a back and a next button and instruct the user to review their answers and if incorrect, to select the back button in order to reenter the data. I have the back button set to jump to the previous slide by number (i've tried previous, last slide, etc...)
The flash movie freezes when I select the back button. I think flash is having trouble going back to the fill in the blank fields from the displayed variables. Any ideas? or work arounds for this. The idea solution would take them back to the page with the data already in the fields so they could correct the errors only and then return to the review page.
Thanks
Scott

Hi there
Is scoring enabled on these? If so, perhaps your quiz settings are preventing backward movement.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Have 2 or more fill in the blank on one slide

How is it possible to have 2 or more fill in the blank options in Captivate 8?
I have seen posts on here that link to now closed websites. If anyone could give some advice I would appreciate it hugely.
Thanks

Thanks for that I'm very thankful.
Do you know if its possible to create a GIFT file which allows an import of 2 FITB fields?

Fill in the Blank Problem

Alright, I'm new to captivate and all that, but I have a slight problem with fill in the blank quizes that I can't seem to figure out. What I want to do is create fill in the blank quiz questions that already have an incorrect answer in the blank that, after a user attempts to answer the question, returns to the original incorrect answer. So, for instance, if I had a fill in the blank that read "(Cats) go woof woof" where the parentheses represent the blank, I would want 'Cats' to reappear after a user incorrectly filled in that blank. As it is, it seems to keep the user text. I've tried checking and unchecking the retain text button in options, but that doesn't seem to do it. Any help would be much appreciated.

Re-reading the question, I realize I may not being clear? I want the example text in a text entry box to re-appear after a user types in an answer and is given the failure or success message. Not possible? Thanks in advance.

Cannot 'Unmark Blank' for FIB Questions after Upgrade from CP4 to CP5 (Fill in the Blank)

Hi Everyone!
I'm having trouble editing a fill in the blank question that was upgraded from CP4 to CP5.
The problems is I cannot see where the blank is. Not the blank in my sentence, I have that, but the entry box. When running the course the blanks are at the TOP LEFT corner fo the slide.
but when creating the course I can't see where the blanks are, to move them.....
So to Troubleshoot, I thought I'd re-construct the answers, I clicked the sentence, and clicked unmark ... but it does not unmark....
<EDIT> Okay I got it to unmark, sorta, but not really. Now I have three answer boxes on the test in run mode, but cant see ANY in CP5 when building it. </EDIT>
Hmmmmm
Anyone got ideas?
(re-constructing the question on a new slide is not desired, I have hundres of questions, considering my 30 courses.
Thank you!
Greg

Hello,
Sorry, but I do not understand your question quite well, it is an editing issue when upgrading. Perhaps it would help if you posted some screenshots?
And to be sure: did you install the patch for CP5 released in December?
Lilybiri

Two fill-in-the-blank answers from same list.

I have a quiz question that is fill in the blank, two separate blanks. The list of answers is exactly the same. How do I insure that the learner does not use the same answer for both blank. Example: List two drinks that taste good to drink: 1. _________ 2. __________ and the list is "coke, pepsi, Dr. Pepper, Sprite". How do I make sure the learner does not list coke twice?
I have Captivate 6......thanks

I do not think this will be possible with the default FIB slide. I would create a custom question slide, using either TEB's or TextArea widget for the 'blanks'. Then you'll be able to check the content of each of the variables that are associated with them, using an advanced conditional action.
Lilybiri

Changing font / appearance of Fill-in-the-blank questions

1) I am using a Fill-in-the-blank question. I can change the
font of the name and the description, but not of the Blank Answers
themselves. I figure this should be possible, since these are
basically text entry boxes (or drop down lists if you select the
list option). Is there a way to do this? Perhaps an option I
missed, or with a Javascript code that modifies some system
variables, or some other way?
2) Also, how can I get rid of the numbering in front of the
Blank Answers that Captivate generates? Is there a way to do this
(an option I missed, Javascript, or whatever)? I even tried to
cover them up with a highlight box, but Captivate does not allow me
to bring the highlight box in front in z-order.
Surely, you wonder why would I want to do this, especially
#2. One really useful example would be to embed the Blank Answers
in the Phrase itself. Example:
The <1> and the <2> are the two longest rivers on
earth.
1. __________
2. __________
By adding some blanks in the Phrase and moving around the
Blank Answers, this could be turned into:
The __________ and the __________ are the two longest rivers
on earth.
I would think that many would consider the second version
more appealing.
In addition, this would open other possible uses for
Fill-in-the-blank questions. For example, consider a table or
spreadsheet like setting where each Blank Answer is actually a
cell. The user fills in the cells, and all entries are evaluated
when the user submits.

I guess the best response would be generate the
Fill-In-The-Blank question as Captivate requires. After it creates
the questions slide, double click on the text box you wish to edit.
For example, when you publish your question "The <1>
and the <2> are the two longest rivers on earth.", this will
appear as a text box on the screen. Double click it to edit and
change "<1>" and "<2>" to "___________".
You should also be able to edit your answer boxes in this
manner as well.
HTH
Jim

Fill In The Blank / Sequence Questions

Is it possible to have a fill in the blank question in captivate (4 or 5) that is scored according to how many options the user got correct?
For example:
If you use 4 grams of 'b' you will need _____ grams of 'x', _____ grams of 'y' and ____ grams of 'z' to complete the forumula.
In this example if they answered all 3 blanks correctly they would get 3 points, 2 correct answers would give them 2 points and so on.
Also, is it possible to score sequence questions according to how many items were correctly sequenced?

Hello,
For the moment partial scoring (as I'm calling it) is not possible in Captivate, at least not in the included Question slides. If you want that feature, and you are certainly not alone, please fill in a Feature Request to get this feature on the priority list of the Adobe team.
If you do not mind the work, it is possible to create question slides yourself using the available objects, user variables and advanced actions. I wrote several articles and blogged about those workarounds, one of them is about creating question slides with possibility for partial scoring (it is not a FIB-question but the principles are the same):
Question slide with partial score
Lilybiri

Created a 20 page fill-in the blank form with livecycle 8.0 and now page 20 needs updated.

Similar Messages

Maybe you are looking for