Created a Document : Waiting for moderation - Status display will be a good addition

Hi SCN Support Community,
i had created a document a week ago, Since this is my first attempt to give back to the community , I am very impatient about when this will be published ( as its under moderation). I understand from the FAQs of Pre-moderation section that we have volunteers to moderate content and it takes roughly 3 days. I also understand that there is no way to check the status of my document till i get the relevant notification. However i feel it will be really helpful if we have in the portal where we can atleast see the status ..doesnt matter if it says "Under- Moderation" (there might be a reason why scn has opted away from this , if there isnt any, why not .
Thanks & Regards,
Tashi

Hi Tashi Norbu,
Your document is released now. Thanks for sharing your experience with a good document.
Here is your document WebDynpro ALV: Editable ALV using Property Binding(Without dedicated boolean attributes)
Keep participating in SCN.

Similar Messages

PS2013 - When creating a new instance of Project Server hangs in 'Waiting for resources' status

Hi,
I have one instance of Project Server 2013 fully operational and I tried to duplicate the instance to make some tests. As I know the issue of using the same Content Database of Project Server in the same Server Farm, I used the powershell backup/restore/dismount
and mount the content database to change the site IDs to avoid index duplication. The Project server database was a regular SQL backup and restore in another database.
I created a new Web App in the port 90 as show below.
Then I included the Content database of Project Server as separated DB from SharePoint for this new SharePoint -acme90 and I tried to create the new instance. The creation hanged in "Waiting for Resources" status.
To make another check excluding the reuse of the SharePoint-80 I tried to create another instance both in the SharePoint-80 where is the working instance and in the SharePoint-90, everything default and again they all hanged in Waiting for Resource.
If I try to create the instance using PowerShell I got the following error:
PS C:\Users\epm_setup> Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCo
llection http://acme02/epm -Lcid 1046
Mount-SPProjectWebInstance : Cannot find an SPSite object with Id or Url:
http://acme02/epm.
At line:1 char:1
+ Mount-SPProjectWebInstance -DatabaseName Test_EPM -SiteCollection
http://acme02/ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Offic...ountPwaInstance:
   PSCmdletMountPwaInstance) [Mount-SPProjectWebInstance], SPCmdletPipeBindEx
ception
    + FullyQualifiedErrorId : Microsoft.Office.Project.Server.Cmdlet.PSCmdletM
   ountPwaInstance
All SharePoint and Project Server services are running, all App Pools and sites are started at the IIS. I could not find a hanging timer job.
I cannot stop the hanged process or dismount the instances using Powershell since no instance created.
How should I solve the hanging status of creation of the instance? As they are in Hyper-V I can go back using one snapshot.
Thank you.
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi Eric,
Thank your for your interest in this case.
I checked for running and crashed PWA jobs and deleted all of them just after restoring the snapshot and tried to create the new instance in the new web app in port 90 (besides the existing and working instance in port 80), but again it hanged in "waiting
for resources". There is not any timer job hanging, no error in event viewer or in log. So the error is well before working with cloned dbs.
Answering your questiion, I am working all on 2013. My intention is backup one instance of the port 80 and copy to the instance of port 90, changing of course the url and the index of the content db of SharePoint. The process I used was:
Create a new web app in port 90, creating a new SharePoint_Content_2 on a
http://server:90 site.
Created the top level site called Portal using the Team Site template.
Create a new content db for new instance of Project Server named EPM_Content_2 using Central Admin.
Backup content db from port 80 instance of Project Server and restore to this EPM_content_2 using PowerShell cmd.
Dismounted and mounted this Project Server content db to create new index for existing sites to avoid index conflicts.
Backup the Project Server DB from port 80 using SQL backup and restored as ProjectWebApp2 db for port 90 instance.
Tried to create a new instance of Project Server
http://server:90/pwa on web app of port 90 using the ProjectWebApp2 db and using the same app pool of the other instance. But as in the previous case, it hang out in "Waiting for resources".
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Re: Waiting for moderator approval

Dear Oxana,
I have posted one blog on 26.04.2014 but still its showing as "Waiting for moderator approval".
May I know what can be the reason.
Thanks
Trinadh

Hi Trinadh,
SCN moderators who are volunteers review content and handle it in a timely manner. In addition you have posted your blog through the weekend. Please reach out if your blog will not be approved (or rejected) later this week.
Also please make sure to create new discussions when your question is not directly related to the original post.
I'll do this now for your question.
Thanks,
Oxana

Waiting for moderator approval

Hiya,
So I wrote a blog in the HDE space a few weeks, and published it today. It's this one: Tamas Szirtes, HANA Distinguished Engineer and Linguist.
Then I wrote another blog for the next HDE, but I pressed the save button so I could publish it when ready. Then I got the message "Waiting for moderator approval".
I'm guessing there's some sort of throttling thing going on if you write blogs too fast? And there's a bug where it thinks when I write a blog but press save, I'm spamming?
By the way I'm a moderator in this space
John

I can confirm this isn't a bug and is the result of the SCN Pre-Moderation rules in place to prevent spam. Sorry for any inconvenience and we're keeping an eye on things so that we can action accordingly as quickly as possible.

Application still in "Waiting For Review" status

All,
Although I've submitted my application to Apple (nearly a week ago), it's still under "Waiting for Review" status. How long does this process take to change the current status? In addition, will I know whether or not my application will be approved? I mean, I'm kind of concerned about my application approval...
Thanks in advance.
Regards,
Luiz Duraes

Ah ha

All off a sudden I get waiting for job status notification on a package that has worked for years

Does anyone else have this problem, the package in question is Adobe CS 5.5, this package as worked for years all of a sudden the OSD, gives
waiting for job status notification and hangs forever on the installation of Adobe CS 5.5
If I run the batch file manually that I am using in the SCCM package for Adobe CS 5.5
it works perfectly, but when part of an OSD I now get waiting for job status notification.
Any advice would be great.

Hi,
I recommend you check the following log files on the client.
AppEnforce.log
It records details about enforcement actions (install and uninstall) taken for applications on the client.
execmgr.log
It records
details about packages and task sequences that run.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT204053 I have one icloud id on my mac and want to share with an ipad with a different icloud id. if I create a new id for both of us will this work? My concern is losing data on either device.

I have one icloud id on my mac and want to share photos, calendars, etc with an ipad with a different icloud id. if I create a new id for both of us will this work? My concern is losing data on either device. (the mac book pro is new, but has all of the retrieved data from my previous mac book pro)

You will lose data from whichever was the 2nd to last to sync .
Don't do it.

How to delete a app which is in waiting for submission status

I entered an APP in Itunesconnect, now its status is "waiting for submission". But now I decided not to publish this APP. What can I do in order to delete this APP from my itunesconnect account.

Hi,
I found the stock in MD04 transaction. Can you tell me for what purpose these quantity of stock is blocked here in the Stock/Requirement list?
I found a lot of line items and when i click on the detail tab, it takes me to a delivery order. When I click on the document flow, all the deliveries have been completed (PGI done). If PGI has already been done for these deliveries, then why it still shows in "Shedule for Delivery" status. I can not use those quantities as these are blocked and can not be used for future delivery. How to make it available under "Unrestricted use"?
Thanks & regards
Satya

Waiting for Acknowledge status

Hi All,
I have a scenario already running in PRD (IDOC to File).
Now there is some enhancement required to be done, based on some specific plant, the delivery is to be sent to different location.
I have done the configuation by making another Business Component using routing rule & further assingned the routing roule to
Receiver Determinaion. the scenario is running perfect. Files are being created in the target system based on Plant.
but in SXMB_MONI, the message is in success state where as there is one column, as 'Ack Status' here comes waiting for
acknowledgment with a red icon.
How to avoid this, do I have create a Business system in SLD, or just neglect this message as files are being creted at the location.
Thanks,
Krishna

Hi,
\You can disable Acknowledge by using report IDX_NOALE for your IDOc.
Refer this
IDOC - XI - File

How to create a Document Template for "Scanned" PDFs? (Editing isn't necessary.)

I have a Custom Content Type called "Vendor Invoices". It is based off the "Document" Content Type. I would like to create a "Document Template" that will support "PDFs", but the PDFs should always be added via an
"upload" (since these are Invoices that we will be "receiving", there is no need to actually "Create" one). So, I don't need to support "New Document" or the "Drag and Drop" "New Document". I simply
need the users to "Upload" the documents. Although, I have created several Columns for this Content Type (Invoice Number, Invoice Date, Vendor Name, etc) that the user will input when uploading the Invoice (PDF), so I WOULD like the "Document
Information Panel" to appear. Is that only possible by using one of the Office document types?
Any thoughts or ideas on how I might accomplish this?
Thanks!
Shayne

Hi,
According to your post, my understanding is that you want to create a pdf content type.
We can use the PDF SharePoint Cumulative Update 1 to achieve this scenario, it allows you to create new PDF template and then deploy it as a Content Type.
There is an article about this topic, you can refer to it.
https://www.pdfshareforms.com/deployment-of-pdf-template-as-sandboxed-wsp-solution/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Wait for Renderers to Display

I'm testing a component with an editable DataGrid with custom item renderers. I wanted to use a sequence to simulate the user modifying a cell in the datagrid, but to be able to do that, I have to first make sure all the visible renders have been added and drawn. I've tried waiting for creationComplete and show but both of those events can potentially be dispatched before the renderers are added. Is there any event I can listen for in my test that will guarantee all the renderers have been drawn and displayed for the visible section of the datagrid?

Yes, but if you combine that with other methods you can get where you need to go.
var renderer:IListItemRenderer = dataGrid.itemToItemRenderer ( dataObjectToFind );
if(renderer)
     var rowIndex:int = dataGrid.itemRendererToIndex( renderer );
     var colIndex:int = columnDataFieldToIndex( dataFieldToFind );
     // index null checks..
     dataGrid.editedItemPosition = {columnIndex: colIndex, rowIndex: rowIndex };
Here is a example method for finding your column index for a datafield.
public function columnDataFieldToIndex ( dataField:String ) : int
     var colIndex : int;
     for each (var column:AdvancedDataGridColumn in columns)
          if(column.dataField == dataField)
               colIndex = columns.indexOf( column );
               break;
     return colIndex;
Hope that helps.

VF06 - Create billing documents separately for each delivery order

Hi gurus,
Just as subject, I want to create billing documents for each delivery order in batch job.
Can anybody tell me how can this be achieved.
thank you.

Hi,
The steps to create a background job is mentioned below:
1. Go to transaction SM36.
2. Then give the Job name & job class.
3.If spool requests generated by this job are to be sent to someone as email, specify the email address. Choose the Spool list recipient button.
4.Define when the job is to start by choosing Start Condition and completing the appropriate selections. If the job is to repeat, or be periodic, check the box at the bottom of this screen.
Reward me if you find this helpful
Regds.......
Sumit
Edited by: Sumit Rayaguru on Jul 22, 2008 9:01 PM

I am having an iphone 4 and it is not working. i am trying to restore it on itunes directly but it stays at waiting for iphone status with no errors and the iphone goes into a mode where it keeps restarting continuously with apple logo on the screen

the iphone goes from recovery mode to some other mode where it keeps restarting with apple logo flashing on the screen continuously. and there is no error in itunes at all which stays in "waiting for iphone" status

Hi there yaswanthfromcumbum,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W.

"Waiting for job status notification" holding up OSD TS

I have come to another roadblock.
I am getting the above message when I try to run my TS, it is a .vbs file written by someone else (I dont know .vbs and have no way to troubleshoot it, but it was working fine and has not been changed)
I have 4 differend models of laptops that get hung up on the exact same step of the TS every time, and they are all running a different .VBS
They are all Lenovo laptops, and the TS Step is installing the proprietary Lenovo applications.
Script looks like this
set oShell= CreateObject("Wscript.Shell")
set oEnv = oShell.Environment("PROCESS")
oEnv("SEE_MASK_NOZONECHECKS") = 1
'Copy all drivers to the local driver folder
set filesys=CreateObject("Scripting.FileSystemObject")
If filesys.FolderExists(".\hprotect") Then
   filesys.CopyFolder ".\HPROTECT", "c:\drivers\HPROTECT",True
End If
If filesys.FolderExists(".\PWRMGR") Then
   filesys.CopyFolder ".\PWRMGR", "c:\drivers\PWRMGR",True
End If
If filesys.FolderExists(".\Hotkey") Then
   filesys.CopyFolder ".\Hotkey", "c:\drivers\Hotkey",True
End If
If filesys.FolderExists(".\video") Then
   filesys.CopyFolder ".\video", "c:\drivers\video",True
End If
If filesys.FolderExists(".\fingerpr") Then
   filesys.CopyFolder ".\fingerpr", "c:\drivers\fingerpr",True
End If
If filesys.FolderExists(".\rapidbt") Then
   filesys.CopyFolder ".\rapidbt", "c:\drivers\rapidbt",True
End If
If filesys.FolderExists(".\commutil") Then
   filesys.CopyFolder ".\commutil", "c:\drivers\commutil",True
End If
'Install Drivers from local drive
'T530-win7
oShell.Run "c:\drivers\video\setup.exe -S",0,True
oShell.Run "c:\drivers\Fingerpr\setup.msi /q /norestart",0,True
oShell.Run "c:\drivers\HPROTECT\setup.exe -s -v""/qn REBOOT=ReallySuppress""",0,True
oShell.Run "c:\drivers\rapidbt\setup64.exe /s /v""/qn REBOOT=ReallySuppress""",0,True
oShell.Run "c:\drivers\Hotkey\setup.exe /S",0,True
oShell.Run "c:\drivers\PWRMGR\setup.exe /s",0,True
oShell.Run "c:\drivers\commutil\setup.exe /SP- /VERYSILENT /NORESTART /SUPPRESSMSGBOXES",0,True
oEnv.Remove("SEE_MASK_NOZONECHECKS")
If I try to run the .vbs files manually it gives error
Path not found
Line 10
Char 4
800A004C

Extract the exe files to give you the actual drivers. Then import them and create the driver packages. Trust me, it will be much easier to manage in the long run. You can see how to do it here:
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part-9.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

"Waiting for device to become ready" can't burn additional copies

I created an iMovie and burned about six copies on iDVD. When i went to put in the seventh disk it sort of froze up with the "Waiting for device to become ready" message never going away. I attempted to shut everything down, even turned the computer off for awhile thinking maybe it was overheated but several hours later its doing the same thing. It will burn the first copy but get hung up when attempting to burn additional ones. Any suggestions???

It's often recommended areound here to let the optical drive cool down after burning 3-4 disks in a row.
See if you can burn any kind of disk via the Finder to make sure the drive is OK. Also I suggest you follow this workflow for future projects:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The save as disk image as mishmumken recommended will save you from having to reencode the project if you want to burn another copy at a later date. It also lets you verify the encoding process before committing the project to disk.
OT

Created a Document : Waiting for moderation - Status display will be a good addition

Similar Messages

Maybe you are looking for