Created a technical sys. & a buss system,but its nt visible in Integrtn dir

Hello friends,
I am following "Configuring IDOC-XI-IDOC Scenarios.pdf guide". It says we have to maintain System Landscape Directory(SLD), where we have to create a technical System and a bussiness system. I have done that .
Then it says In the Integration Directory, the adapter specific identifiers of business system
are retrieved from the SLD.
But when i accessed the Integration Directory, i wasnt able to see my Bussiness System listed.
So can anyone please tell me how would my bussiness system that i created in SLD be visible in the Integration Directory

Hi bhavesh , thanks for helping but i need a little more help . a little bit of confusion left on the below lines
> You will be creating a partner profile in the Sender
> System  for the Receiver Sytem. In this, you will
> have to create an entry in the Outbound IDOC and in
> this, you will have to mention the RFCDESTINATION /
> PORT of XI created using SM59 and we21.
I got that i will be creating a Partner profile in Sender system for the receiver system.
when i do so there is option called OutBound Parameters.
Now in that i give Message Type as MATMAS and double click. then it asks me for many options one of which is Receiver Port . <b>Now over here do i have to give the Receiver port of XI or the other R/3 system.</b>
So confusion lies in the above bold lines. Do i have to gice the Port of XI or the Other R/3 Receiver system.
> Likewise, in the Receiver System, you will be
> creating a Partener Profile in We20 for the Sender
> SYStem with an entry in We20 for inbound side.
>
here the doubt is same as above.
kindly do reply.
Can i please also have your Yahoo IM if you do not mind, mine is [email protected] if you dont want to post your id in public kindly add me .
waiting for your reply. thanks
> Hope this clarifies,
> Regards,
> Bhavesh

Similar Messages

  • Please help my flv video file works perfectly localy...but its not visible in remote ftp why??

    hi All,
    Please help me. my flv video file works perfectly localy in
    my computer...but its not visible when i uploaded the flv html and
    flash files to ftp?
    thanks in advance

    This suggestion worked to see the hidden folder(s). Thanks very much, but I feel like I am miles away from moving my ipod music to my new computer and getting it all to work. Here is why...
    1. First when I plug the ipod in, in disk mode, to the USB slot it shows up as a K drive for a minute or so and then disappears. itunes keeps opening, asking me to sync (which will erase all my music on the ipod!) and the K drive (ipod) vanishes.
    2. I pod help says to drag the itunes file out to the desktop and then drag the itunes file on the ipod into the "my music" file within documents and settings. However, there is an "ipod control" file (was hidden) and within this there is the following: artwork, itunes (with 13 subfolders of its own), device, and music. So do I just drag the itunes file inside ipod control into My music? Or do I drag the whole ipod control file? or other?
    3. Additionally there are K drive (ipod) files for calendar, photos, contacts, notes, and ipod control (was hidden). I don't care about any content in the first four, but are they needed to operate? Do I drag these over also to the My music file?
    Whew, very frustrating. Thanks, Ric

  • HT1420 i am trying to authorize my system but its showing as u are authorized but i am not able to transfer my files like tones to my iphone

    i was authorize itunes to connect my iphone for transfer but it is showing that it was suscessfully done but again its asking to authorize again after and after ok

    i was authorizing my system with windows XP  itunes to connect my iphone for transfer but it is showing that it was suscessfully done but again its asking to authorize again after and after ok
    iPhone 4S,  iOS 6

  • Time Machine creates new disk image when backing up but files not visible

    When I back up my files (daily) to tan external drive TM creates a new disk image (named laptop) on my desktop (in addition to the image for the external drive named TIme Machine Backups). When I click on the new disk image while it's backing up I see a list of recent backups. However the disk image disappears after completing the back up and the files do not appear in the Star Wars screen - only old back-ups from 2009. How can I access the newest backups?

    alanol wrote:
    A disk image labeled Time Machine Backups resides permanently on the desktop
    Right-click it, and select +Get Info.+ See what the path is (after +Disk image+ near the top of the General section).
    Also the amounts for Capacity and Used.
    as a consequence of the repair a sparse bundle (Zero KB) folder was created.
    No. That may have been created by the new backup, though.
    Also a new "lost +found" folder was created containing several ".emix" files.
    Those are email files.
    Net, net - same basic problem, can't see the newest backups in the Star Wars screen.
    I suspect they're in the disk image.
    Do you have any external HDs connected?
    Try a "full reset" of Time Machine, per #A4 of Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

  • I save a subsite as a template.... but its not visible when I do a create new site

    Hi,
    I saved a subsite as a template successfully. I can see that in the solutions gallery my template exists in activated state.
    Now when I click on site settings -> create.
    I don't see this template in the option to create a new subsite.
    Why?
    My hope was that I would be able to create more subsites based on this template.

    After enabling Publishing go to the Site Settings > Page Layouts and Site Templates section Under Look and Feel.  on that page you will see a list of allowed Site Templates for that site.  You should see your custom template in the box on
    the left under page layouts.  Add it to the right side and it should show in the interface when creating a new site.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • I am using a web hosted email site and I am unable to use the clipboard/cut/paste functions? I already tried to create a user.js file with script but its still not working. What else can I do?

    I have double, triple checked to script and I can't find any errors.
    The only thing I might be unsure of is the actual site that I am listing. I tried https://www.webmail.????.com and I tried https://www.????.com. Is it that its a secure site? HELP

    Did you try to use the keyboard instead (Cmd+V and Cmd+X and Cmd+C)?
    Maybe Shift + Insert works as well on Mac (does work on Windows and Linux).
    *http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    *https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper

  • Create a Technical System Web AS Java

    Hi guys,
    Anyone knows how to create a Technical Sys Web AS Java like we usual do with RZ70?
    Thanks in advance,
    Ricardo.

    Hi -
    Using the VA corresponding to the Web AS Java system, goto the SLD Data Supplier service, then Runtime tab->HTTP Settings tab (bottom).  fill in required parms and save.  To trigger an initial send, use the button ("This triggers data transfer to SLD...") - left most button on upper toolbar of service.  Check your SLD for tech system creation.
    Regards,
    Jin

  • How to create the log file in remote system using log4j.

    Hi,
    How to create the log file in remote system using log4j. please give me a sample code or related links.The below example i used for create the log file in remote system but it return the below exception.Is there any authandication parameter for accessing the remote path? Please help.
    public class Logging
    Logger log=null;
    FileAppender fileapp=null;
    public Logging(String classname)
    try
    log = Logger.getLogger(classname);
    String path=" [\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt|file://\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt]";
    fileapp = new FileAppender(new PatternLayout("%r [%t] %-5p %c %x - %m%n"),path, true);
    log.addAppender(fileapp);
    log.info("Logger initilized");
    }catch(Exception ex)
    ex.printStackTrace();
    java.io.FileNotFoundException: \\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt (The network path was not found)
    at java.io.FileOutputStream.openAppend(Native Method)
    at java.io.FileOutputStream.<init>(Unknown Source)
    at java.io.FileOutputStream.<init>(Unknown Source)
    at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
    at org.apache.log4j.FileAppender.<init>(FileAppender.java:109)
    at annwyn.logger.BioCapLogger.<init>(Logging.java:23)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Please help.
    Thanks in advance.
    Saravanan.K

    Sorry path is missing for the above request.
    path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
    please help.
    Saravanan.K

  • HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal accou

    Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
    Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal account?

    You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

  • How To Create A Technical And Business Systems For Web AS ABAP ???

    Hi Experts,
    How To Create A Technical And Business Systems For Web AS ABAP ???
    Please Let me Know All the Step-By-Step Process to Create ????
    Points Will be Given
    Regards
    Khanna

    Hi Sumit,
    When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
    So I got An Entry for the Technical System for XI System.
    Now i Deleted that and Executed RZ70 in R/3.
    When I Executed RZ70, I got this Error.
    <b> "RFC Call failed: Error Opening an RFC Connection "</b>.
    Now I am Unable to see Any Technical System  Under Web As ABAP. It's Showing Empty Now.
    Please Let me know
    Regards
    Khanna

  • I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    You'll want to fix this via the online system you used to create the PDF.
    If all content mastering and page configuration is done online then that is where you must make a correction to what you did before.
    If a file is uploaded to the online system for processing then you must revisit that file.
    Open the file with its native application and correct page size there.
    If you upload a scanned image to the online system you must configure the scanner software to output the needed page size.
    Be well...

  • What r steps for creating proxy Technical & Busines System In SLD ?

    Hi All,
    While creating proxy Technical & Business System In SLD should be 3rd party or WEB AS
    ABAP..
    If its WEB AS ABAP ,what are the parameters should be passed for that TS.
    Message was edited by:
            Nandan ND

    Nandan,
    <b><While creating proxy Technical & Business System In SLD should be 3rd party or WEB AS
    ABAP..></b>
    It should be 3rd Party.
    go through this wiki to create the BS & TS.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
    Regards,
    Sarvesh

  • Database tab is not filled in SLD after I create a technical system abap

    Hi guys,
    why is it? what do I have to set up to have this tab filled with valid values?
    Thank you
    Olian

    Hi,
    For technical system of type WebAS ABAP, you do not create it manually in SLD......instead its process is to log into R/3 system and run transaction RZ70 and from this transaction technical details of R/3 system are published to SLD of XI..........this is a basis activity and so you can ask your basis guys to do it for you...........then when it is done, then your Web AS system will be created in technical system in SLD with all the data filled properly.
    Regards,
    Rajeev Gupta

  • Unable to create two SourceSystem with same Logical System

    Dear gurus,
    The customer has expressed the need to connect a data source with the same Logical System name of the actual DS.
    Infact, on the SCC4 the R3 Prod/qua/dev has the same LOGSYS.
    The aim is to link the PROD/R3 system to the QUA/BW system.
    During the creation of the DS on RSA1, an error message display that BW cannot create the Source because the Logical system is already in use.
    All we know that on BI can not be two identical technical name, but if i CANNOT change the LogicalSystem on the SCC4, there is a workaround?
    Can i map the new sourcesystem with another LOGSYS name?
    Or  the only solution is to change the logical?
    Thanks in advance
    C.C

    Hi Sven and thanks for the reply.
    unfortunately the customer chose to appoint the entire landscape with the same logical system name (policy), so that i cannot make this change on SCC4.
    So, i have to link only one SourceSystem (or quality or prod)...but at least, i will make a refresh copy of the quality system
    ps: i'm a Basis

  • How To Create A Technical  For Web AS ABAP ???

    Hi experts,
    How to Create a Technical System For Web AS ABAP  in SLD, Using "SLDAPICUST" And RZ70 Transaction Codes.
    Please Give me Complete Steps And Support to Create TS in SLD Successfully
    <b>If Ur Answers Are Help full Means Points will be Rewarded</b>
    Regards
    Khanna

    Hi Prateek,
    I Did the Things Which is Presented By Michal in This Blog.
    But When I Executed RZ70 With My Gateway Service as "sapgw01" And the Gateway Host As "Server Host Name".
    I Got the Error When I Click on "<b>start Data Collection"</b> After Execution of the Program As Follows
    <b>"Used RFC destination :SLD_NUC"</b>
    <b>"RFC call failed : Error opening an RFC connection"</b>
    <b>"Batch job not scheduled"</b>
    All Other Are Success Like Data Collection ......
    Please let me Know What to Do Now...
    Regards
    Khanna

Maybe you are looking for