Created a Vlan but doesnt show in "Show Vlan" output

I created the following vlan on one of my cisco WS-C6504-E switches.
interface Vlan352
description SecurInfra
ip address 10.14.36.2 255.255.255.0
ip helper-address 172.17.40.40
ip flow ingress
ip flow egress
shutdown
When i do a no shutdown and type "show vlan" to see the list, it is not listed?
This switch is in VTP server mode, so i was able to create it no problem.
am i over looking something?
Thanks

What you have showed us is about the layer 3 SVI interface vlan 352. You have created this at layer 3. You have not shown us anything that shows that you created the layer 2 vlan. Is it possible that you are confused about the relationship of interface vlan 352 which is layer 2 and of vlan 352 which is layer 2?
Note that the show vlan command is looking for the layer 2 vlan and not the layer 3 interface vlan 352.
HTH
Rick

Similar Messages

Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes

Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes tried to check usb driver but computer says it is working properly

Just disconnecting it without ejecting should not cause permanent damage. It may cause data corruption, if iTunes was in the process of syncing at the time. But iTunes should still see the shuffle and (maybe) tell you to Restore it.
Is it possible that the "accident" damaged the USB cable?
Make sure you have done this on the shuffle since the problem occurred
http://support.apple.com/kb/HT1655
And you should also shut down (power off) the computer, if you have not already.
Have you tried more than one USB port on the computer (not a hub if you use one)? You can also try it with all other USB devices disconnected, except for standard keyboard and mouse (if normally used).
If those things do not help, what version of Windows do you use?

HT4623 I purchased an audiobook in I tunes on my computer, but cannot figure out how to download it on my phone....it always lets me download purchases of movies and tv shows but doesnt show an option for audiobooks

I purchased an audiobook in I tunes on my computer, but cannot figure out how to download it on my phone....it always lets me download purchases of movies and tv shows but doesnt show an option for audiobooks

Oh alright -- I manage to resolve my own stupidity quite abruptly, actually.
Shortly after posting this, I annoying took another gander at iTunes Store settings. To my own idiocy, I must have unchecked "Show iTunes purchases in the cloud" at some point. In my defense, though, the availability of songs in iCloud threw me off quite a lot.
Ha ha -- anyways, if anyone else is having the same problem, check there.

HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

AppBuilder Application doesnt show the output

Hi All,
I am doing the sample application in AppBuilder, when i run the application it opens a new browser window but it doesnt show the output.
this is the problem, how to resolve this?
If any body come across this issue please help me.
Regards,
Sravanya

Hi Sravanya K,
There seems to be some compatibility issue with latest Chrome update. (All the other pre requisites have nt had any releases very recently)
Last release of other Pre requisites :
Node JS - 5th june 2014 ( Node.js ChangeLog )
JDK - (its to be manually updated).
APP Builder (appbuilder-1.0.1252.zip is the last release which happened a long time back )
Google Chrome - Can find latest release logs in Chrome Releases and chrome has an Update almost everyday
UI5 Liraries - As per OpenUI5 - Download 16 th July 2014 is the last release of Ui5 libraries.
More over App builder does not need any internet connectivity to atleast run the sample applications / templates of SuperList,Chart. (so the issue might be internally in the system using these pre requisites )
So i certainly doubt the Auto Update feature of Google Chrome , causing this issue.
Though this currently have nt worked in latest version of chrome in my system , other major browsers are still supported .
As a work around can suggest to work with other browsers.
I also tried with Safari , Firefox and safari worked satisfactorily -
(Chrome, Safari are recommended for App Builder ) (Firefox worked partially)
attached is the screenshot of Sample Application running in Safari
Regards
Virinchy

EJB deployed but doesnt show up in JNDI tree on weblogic

Hi,
I have a sample EJB deployed on weblogic 10.3 server. My Bean class contains following code.
========================================================================
@Stateless (mappedName = "DemoEJB")
@TransactionManagement(TransactionManagementType.BEAN)
public class DemoBean implements SessionBean {
     static final boolean verbose = true;
     private transient SessionContext ctx;
     private transient Properties props;
     @SuppressWarnings("deprecation")
     @Override
     public void setSessionContext(SessionContext ctx) throws EJBException,
               RemoteException {
          // TODO Auto-generated method stub
          if (verbose)
          System.out.println("setSessionContext called");
          this.ctx = ctx;
          props = ctx.getEnvironment();
     public String demoSelect()
throws RemoteException
return("hello world");
===========================================================================
I have created a jar file for the above class using eclipse and deployed it on weblogic. I can see the EJB in the <Deployment> on weblogic but it doesnt appear in <EJB> on JNDI tree view. Therefore i cannot access it from my client code (also written in Eclipse IDE).
I will appreciate any guidance in this regard.
Thanks
Regards,
Awais

Hi,
i have the same problem with yours
This is my annotation with EJB3.0:
@Stateless(mappedName="ConSession")
@Remote(ConBeanRemote.class)
@Local(ConBean.class)
and i have a weblogic-ejb-jar.xml to define my jndi name
<?xml version="1.0" encoding="UTF-8"?>
<weblogic-ejb-jar xmlns:wls="http://www.bea.com/ns/weblogic/weblogic-ejb-jar"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
          http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd
          http://www.bea.com/ns/weblogic/weblogic-ejb-jar
          http://www.bea.com/ns/weblogic/weblogic-ejb-jar/1.0/weblogic-ejb-jar.xsd">
<weblogic-enterprise-bean>
     <ejb-name>ConSession</ejb-name>
<stateless-session-descriptor>
     <business-interface-jndi-name-map>
          <business-remote>com.staffware.ConBeanRemote</business-remote>
          <jndi-name>ConSession#com/staffware/ConBeanRemote</jndi-name>
          </business-interface-jndi-name-map>
          </stateless-session-descriptor>
          <local-jndi-name>com/ConfigurationManagerBeanLocal</local-jndi-name>
     </weblogic-enterprise-bean>
</weblogic-ejb-jar>
[ the most important：　I also have specify JNDI in a java file like this
          beanRemoteJNDIs.put("ConBeanRemote","ConSession#com/staffware/ConBeanRemote");
          beanLocalJNDIs.put("ConBean","java:comp/env/com/ConBean");
and i can find the ConSession#com/staffware/ConBeanRemote in the jndi tree . but it shows like Multilevel directory tree
and when i login the website and click the button
.another error comes out :
13:35:55,046 ERROR [EJBDelegate] Unable to lookup reference java:comp/env/com/ConBean for ConBean!
javax.naming.LinkException: [Root exception is javax.naming.LinkException: [Root exception is javax.naming.NameNotFoun
dException: While trying to look up /app/ejb/CONFIG-ejb-2.0.jar#ConSession/local-home in /app/webapp/CO
M/18328287.; remaining name '/app/ejb/CONFIG-ejb-2/0/jar#ConfigurationManagerSession/local-home']; Link Remaining Name:
'java:app/ejb/CONFIG-ejb-2.0.jar#ConSession/local-home']; Link Remaining Name: 'com/ConBean'
at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:104)
at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:884)
at weblogic.jndi.internal.ApplicationNamingNode.resolveObject(ApplicationNamingNode.java:187)
what should i do ?
and should i specify the jndi name in the java file . the JNDI name defined in the weblogic is right?
can you help me ?
thanks very much in advance!

IPod shows up under my computer, but doesnt show up in iTunes

When i plug in the iPod, a window pops up showing the folders contained on the iPod, but the iPod doesnt show up in iTunes.

here is a place to start
iTunes Does Not Recognize Your iPod

TS1538 my ipod connects to the computer but doesnt show on itunes and it wont synk

my ipod froze so i reset it now itunes dont read my ipod but it shows its connected to the pc please help

Yep add me to that list too, and I have tried the menu and select button on the ipod all that happens is the contrast goes very faint, tried the combo thing and it tells me it can't be installed on this computer, tried the 5 R's on the ipod frequent question page, all do nothing, totally un impressed with Apple for the first time, never had any problems but version 8 of itunes really needs bugging out before it was released, if anyone has any other ideas please do add them as I have just bought a whole load of music which is sat on my library and cant move to ipod...oh and I have also tried the create a new account and see if that works, well I could see the ipod but couldnt transfer the contents back to itunes - sooooooo unhappy can't do apple care as classic ipod is way past 2 years

Can transfer to playlist, but doesnt show up in library please help

I have several songs that i am unable to transfer directly to the library.... they are easily dragged/dropped into a playlist in iTunes, but dont show up in the main library.
Also they show up as a playlist on my iPhone 4, but again are not found ANYWHERE in the main library..
After some digging, I was able to find these songs in a folder within the iTunes folder on my PC
The songs are labeled correctly, yet they show up as "unknown album, unknown artist" but they are clearly labeled .... Im confused and just want to get these songs to appear in the main library of iTunes and also on my phone.
They appear as a playlist on my iPhone but I cleared the playlist and suddenly they were gone...instantly.
I just want these songs on my phone... (these are mp3's that I have had on my PC for years)

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Podcast saying its submitted but doesnt show on iTunes

Our podcast had a one year hiatus... we recently started it back up again using the same feed... everyone who had previously subscribed got the new episode, but there's no sign of it on iTunes nearly 10 days after it went up.. Our feed is..
http://feeds.feedburner.com/vrecordings
When I try to resubmit iTunes tells me the feed is already submitted..
Anyone got any ideas how we can get it showing on iTunes again?

i am having the exact same issue, we have been running it for 5 years, had 26 volumes and now it has disappeared from iTunes.
we can still download the new podcast by subscribing to the feed in iTunes (file>subscribe to podcast) an the new item downloads fine.
but the podcast cannot be found in itunes.
when trying to resubmit is says the feed has already been submitted!
checked all the code, has driven me insane - valid feed but not showing up
as you say not getting much from support either

Ipad connected but doesnt show up under devices

itunes doesnt show ipad under device headings

See Here
iPhone, iPad, or iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/itunes/devices/

Playlist created in iPad but not showing on iPhone?

I have had iTunes Match for couple years now and no issues till today -- purchased a new tune on iPad and then created a new playlist with new song and others already purchased - the new song shows up on iPhone, but not the newly created playlist ? It is only on my iPad where I created it ??

Welcome to the Apple Community.
You can re-download content purchased from the app store using the purchased option which is revealed by tapping the updates option at the bottom of the screen of the App store app on your iOS device.

Recordset shows tables but doesnt show columns!!

Hiya,
Working on my first dynamic website, server on a datastick
(WOS)...using dreamweaver 8.02 and phpmyadmin
All connections with dreamweaver are successful for the
database created in phpmyadmin...but when i create a recordset in
the recordset dialogue box it finds the table names but not the
column names (when i click the + for each table it comes up as
'none')
I have hand coded the SQL in the recordset dialogue box to
create my recordsets, and when i click test, i get a successful
result...including the column names
Point is I would like to save time with dreamweaver....any
ideas why column names of each menu show up as 'none' in the
recordset dialogue box when they clearly exist in the test after
hand coding?
If anyone can help or even has experience of this I would be
most grateful

I assume that you are using CF as your testing server. If so
what you are
seeing is a bug in the update. The work around appears to be
to change the
database type when creating the DNS in the CF Administrator
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Deezy" <[email protected]> wrote in message
news:eiq9nv$h38$[email protected]..
> When I select to create a recordset from within DW8, I
select the
> datasource,
> then the drop down list of tables is displayed as a full
path to the
> database
> on my hard drive. IE It would show up as
> C:\inetpub\wwwroot\sitename\database\cart.products
>
> I constantly have to go into the code and then edit the
table name for it
> to
> work. Is there a way to correct this porblem. It only
happens on my laptop
> and
> not my desktop.
>
> Thanks!
> Dee
>

Upload page to server but doesnt show

Hi there,
i have done the following steps but can't find my page on the web:
1. opened DW and insert picture (jpeg) as a spalsh page. saved the file as index.html
2. opened manage sites. created "mysite". double clicked on it and insert site name ("mysite") and local site folder (/user/username/desktop/mysitefolder)
3. clicked on server on the left hand of the popup window and added a new server
    Servername: mysite
    Connection using: SFTP
    SFTP Address: got this provided from the server host
    Username: provided from server host
    password: provided from server host
4. clicked the test button and DWCS6 connected to your web server successfully
   (i left the root directory empty and the web URL is http://SFTPaddress/)
5. pressed all save buttons to leave the site manager
6. uploaded the jpeg and the index.html file to the remote server. No popup window that something is wrong.
7. go to safari and enter www.mysite.com and safari tells me that it can't find the server.
Did i forgot something somewhere? because when i pushed Test DW connected successfully to the server.
i would really appreciate if someone is able to help me.

Definitely a setting mismatch.
Most servers use /public_html (Linux servers) or www as root directory on your web server. If you upload the files below that directory level, it wont show up on your website. You may want to check that.

I can login but doesnt show any of my music

Having trouble here ....i recently received a new note 4 phone because my 2month phone over heated & died so now im trying to load all apps & started with my spotify app,well im login & shows im login but no music none of my music.Im stuck here can anyone help me out here....thank you

Hi g30marquez. When you logged into your new phone, are you certain that you used the exact same login details as on your old device? Sometimes people have duplicate accounts, and it's possible that you accidentally signed into a second account as opposed to your primary. Do the songs still appear on the desktop client or the web player? If they do and it's just your phone that isn't displaying anything, then I'm going to assume that it's most likely that you've simply signed into the wrong account.
If that doesn't quite solve the issue, let me know and I'll happily do some more digging to help get this solved. Cheers!

Created a Vlan but doesnt show in "Show Vlan" output

Similar Messages

Maybe you are looking for