Created Adobe Portfolio - now all pdf reload with open
Help! I needed to email 70 pdfs. Instead of putting them all into one large pdf, I used the 'suggestion' in the new Macintosh Acrobat Pro 9 that I use a Pdf Portfolio. ( I used three Portfolios, then emailed them using the "email this portfolio" button that is incorporated into the Portfolio design.)
That worked with mixed results (some of the recipients couldn't open the portfolios, probably because they were using an older version of Acrobat.)
However, the problem I am having is now when I open my Acrobat program, it automatically attempts to load ALL the pdfs from one of the Portfolio. It keeps opening them until it can't open any more. Then I have to force quit.
I looked in the System file to find a preferences file or something like that in order to throw it out, and hope that the program would rebuild a new one - but I couldn't figure out what might provide the same function. (It's been a while since I looked in a Mac System Folder.)
Does anyone have a fix for this?
Thanks!
CLShay
Rule number one: NEVER MESS WITH THE SYSTEM FOLDER.
You can mess with the Library folder, you can mess with your USER Library Folder, but if you mess with the SYSTEM FOLDER you will find out that TOAST can refer to more than the ROXIO CD/DVD burning software.
Preference files can be found in Library/Preferences (you will find nothing useful here for you)
There is Library/Application Support/Adobe/Acrobat (nothing useful here either)
Users/username/Library/Adobe/Acrobat (delete as you wish-however you may not like the results)
Users/username/Library/"Application Support/Aodbe/Acrobat" (nothing useful here)
Users/username/Library/Preferences/Acrobat (this is what you are looking for---delete as necessary)
However, my recommendation is to use a utility like Applejack or Onyx to remove both system and user caches.
Similar Messages
-
I installed my firmware & security updated (as requested) this afternoon, and now ALL my fonts are opened in Creative Suite 4 although most of them are set to 'OFF' in Fontbook. I also noticed the following problems:
:: When I print (via Finder): the page._ to page _ option within the print window no longer exists; meaning: I can only print ALL pages.
:: Also: In InDesign, the 'Help' menu has replaced the former InDesign Help menu, with Apple Help menu.Thanks! As for the Font issue, I should've included the following. When I repaired the permissions, the following repairs were listed (see above). Then I close Disk Uiltity, test InDesign (to not avail). Then I open Disk Utility again, repair permission again, and the EXACT same permission problems reappear. They follow.
At any rate: I'll give both Adobe and Apple support a ring tomorrow. Thanks for having tried to help, Babowa. I very much appreciate it. Enjoy your evening?
2011-06-02 20:26:01 -0700: Disk Utility started.
2011-06-02 20:26:07 -0700: Repairing permissions for “Macintosh HD”
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar".
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar".
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar".
2011-06-02 20:26:13 -0700: User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar".
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar".
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar".
2011-06-02 20:26:13 -0700: Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist".
2011-06-02 20:26:13 -0700: User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
2011-06-02 20:26:13 -0700: Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
2011-06-02 20:26:14 -0700: Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:14 -0700: Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts".
2011-06-02 20:26:14 -0700: Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:14 -0700: Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar".
2011-06-02 20:26:14 -0700: Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
2011-06-02 20:26:14 -0700: Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
2011-06-02 20:27:22 -0700: User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
2011-06-02 20:27:22 -0700: User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar".
2011-06-02 20:27:22 -0700: Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
2011-06-02 20:27:22 -0700: Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib".
2011-06-02 20:27:55 -0700: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
2011-06-02 20:28:27 -0700:
2011-06-02 20:28:27 -0700: Permissions repair complete
2011-06-02 20:28:27 -0700:
2011-06-02 20:28:27 -0700: -
How different of PDF downloning with open in new Tab or not Open new Tab
How different of PDF downloning with open in new Tab or not Open new Tab?
My web site distributes PDF files,
and user can download the PDF files in my site.
The problem is I wanna show PDF that download in new tab,
but pdf only downloaded, not open new tab.
How to open new tab by downloading a PDFHow different of PDF downloning with open in new Tab or not Open new Tab?
My web site distributes PDF files,
and user can download the PDF files in my site.
The problem is I wanna show PDF that download in new tab,
but pdf only downloaded, not open new tab.
How to open new tab by downloading a PDF -
I have upgraded my laptop with Adobe X1 and now all my existing savedPDF documents will only open as an encryted word document, HELP! Please!
Hi Juliea,
I think the file association for PDF is not correct. Instead of double clicking the file to open, Please try below mentioned
right click on the file and select open with..
Select Choose Default Program
Select Adobe Reader from the list(If it is not in the list then navigate C:\Program Files (x86)\Adobe\Reader 10.0\Reader and select AcroRd32.exe)
Remember to select the check box"Always use the selected program to open this kind of file"
Click ok
~Pranav -
I hate this, now all pdf documents open with Adobe reader x
Until recently all pdf documents opened nicely with Adobe Acrobat which was installed with the creative suite CS5. Recently I had to update the Acrobat plugin for Firefox and I don't know what exactly was installed but somehow I ended up with Adobe Reader x on my computer and now when I open pdf documents from my hard drive they all open with an Adobe reader which I hate. How that reader managed to install and change my experience without me noticing? Now I have to change file associations. Do I need this reader and what is it for when I have a full version of Acrobat?
I will greatly appreciate your help.Unfortunately, once Reader is installed, uninstalling it will require you to repair your Acrobat installation. You should be able to right click on a PDF and select Open With and set Acrobat as the default. Also, be sure that Reader is not part of the startup of Windows (you can use Start>Run>msconfig to check that) and also open current tasks (ctrl-alt-del) and be sure AcroRd32 or similar file is not running in the background. Be aware that AcroTray is part of Acrobat and is needed for PDF creation.
-
I downloaded Adobe Reader now I am unable to open certain pdf files
I downloaded Adobe Reader and now I am unable to open the majority of the pdf. files from the internet. Has this happened to anyone else and if so how did you resolve the issue?
Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
How to force all pdf's to open with Acrobat
Hi, hope this isnt too silly a question, but how do I make acrobat the default for opening all pdf's as opposed to preview, thanks in advance
It is not difficult. Select a PDF file and then do a "get info" on it. Select, but don't open the file, go to the file menu and selecting "get info", or by selecting the PDF file and using the keyboard hitting the command -I keys. When it opens look for the disclosure triangle in the resulting box that has the title "open with". Select Acrobat as the application to use to open the file and then where there is a button to "change all apps of this type to open with..." select it and that should take care of it.
-
Installed Adobe 9 reader, now no pdf's will open automatically from web based sites.
When I go to web based sites such as Renaissance learning I have been able to download the pdf reports and have them open right away on my desktop. It no longer happens I get an adobe window that says it can't open them and I should download them. But you can't download them.
This is a common problem with the Mac version of the Adobe Acrobat plugin. Could you '''disable''' it here:
Tools > Add-ons > Plugins category
Then the PDF should load either in the stand-alone Adobe Reader or in Preview. (Not sure how to influence that.) -
I switched to an android phone and now all my friends with iphones cant text me
I switched to an android phone and now all of my iphone using friends cant text me because it still registers as an 'imessage'. help!
Thanks!Did you turn off iMessage on your iPhone prior to porting over your number?
iOS: Deactivating iMessage - Apple Support -
Creating a link in a PDF form to open into a new window
I have created the PDF form and every thing seems to be working fine. But I would like to set a link in the form that would open into a separate page. I have tried target="_blank" and onclick="window.open(this.href, 'child', 'scrollbars,width=650,height=600'); return false" with no success. Can someone give me some direction on how to create a link within a PDF form that will open into a new window?
Try this, using JavaScript:
app.launchURL("http://www.adobe.com",true); -
I have created an interactive PDF using Illustrator that has mouse-overs. When i export the file and then open it in Acrobat there is odd pausing on teh image bewteen mousing over it and the text callout that shold then display. Did I export or save incorrectly?
Thank you for both responses! I'm impressed with the fact that you're reading my post.
I'm new to tech matters with Adobe/PDF/Nitro tho I've been using them for several years.
The original file was created by an agency and given to independent contractor to use. I don't know which program they used to create the form. And I don't know what XFA or LiveCycle Designer means because I'm not technically sophisticated unfortunately.
I used Nitro 6 to populate the data and have a number of forms already filled out, which I periodically open and modify and resubmit. But Nitro 6 is acting sick, despite reinstalling several times. I'm attempting to see if it's worth transitioning to Adobe Acrobat, i.e., can I reopen the forms I've populated and continue to work with them. I like some of the Adobe features for other purposes (e.g., OCR).
Any help in determining how to open the form while keeping the data? -
Installed Adobe now all files try to open as PDF
Anyone know how to set system to return to automatic open using proper software rather than auto PDF attempt?
If you are in Windows, you may want to try this:
http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html -
Can anyone help me?
Same error here - started a couple of weeks ago.
Surely Apple are able to help fix this, it's driving me nuts!
I've deleted Adobe reader and re-installed to no avail.
Files display correcly in Safari but not in Adobe or Preview.
Very frustrating.
Cheers. -
PSE9/Win 7: Can I create an album of all jpg's with reduced size?
PSE 9 on Win 7.
I want to take a bunch of my pictures to my iPad via iTunes.
iTunes will accept a PSE Album as a source. But not a Smart Album.
I also want to reduce the size of the jpg's in the album.
Sort of what I can do with Export.
Is there some way I can do this?
Ultimately I'd like to get all my new photos to flow through this downsizing, into the album and
be delivered pretty automatically.
Thanks for any thoughts or ideas.Perhaps the photos app is too basic. I can’t confirm as I have an Android tablet. If you buy a $5 app, iPhoto for iOS5 you also get lots off cool tools and can create journals which make instant web pages. You can share with friends and family simply by using the copy link button and mailing them the URL.
Adobe also has a great Photoshop Touch app which you can sync with tablets via the Adobe Creative Cloud. Unfortunately the new PSDX files with layers can only be worked on subsequently in CS5 and CS6 as there is presently no plug-in for Elements. But the tools make it a great stand alone app if you want to do editing on the iPad.
There’s also the Snapseed app from Nik Software and Adobes consumer app Photoshop Express - so it’s a fast changing environment (Apple will soon launch iOS6) with hardware limitations. Not to be rushed into.
There is a hack/workaround if you have the CCK. You can use a USB flash drive & the camera connection kit to get files directly on to your iPad if you want to avoid the hassle of using iTunes or the cloud.
You first plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your video/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., IMG_1234.jpg; 12345678.jpg; MVI_1234.mov; my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
You will probably see a message like unsupported USB device but you can ignore it and import your photos.
Gotcha
The videos will show up in the photos section on the iPad but a great trick is to just play a movie from the connected flash drive rather than taking up space copying a large file to your iPad. -
How to populate Adobe LiveCycle Designer generated PDF Forms with data from Database in Windows app
Hi
I have a PDF template designed in Adobe LiveCycle Designer. This template has form fields which needs to be filled with data programmatically. I am using windows application in C#.Net 2005 in which I want to retrieve data from database and merge this data into PDF form in respective fields.
How this can be achieved?
I searched a lot & I found that we can process the XDP file generated from PDF to acheive this. I created the XDP file out of the PDF template created in designer. But I don't know how to merge data from database into that XDP file in respective fields and again convert this XDP file back to PDF programmatically. Can anybody help me ? This is urgent.
Thanks in advance.
SambhajiPlease ignore the above code.<br />The following one is correct one.<br />using System;<br />using System.Data;<br />using System.Configuration;<br />using System.Web;<br />using System.Web.Security;<br />using System.Web.UI;<br />using System.Web.UI.WebControls;<br />using System.Web.UI.WebControls.WebParts;<br />using System.Web.UI.HtmlControls;<br />using System.Text;<br />public partial class _Default : System.Web.UI.Page <br />{<br /> protected void Page_Load(object sender, EventArgs e)<br /> {<br /> Response.ContentType = "application/vnd.adobe.xdp+xml";<br /> StringBuilder responseString = new StringBuilder();<br /> responseString.Append("<?xml version='1.0' encoding='UTF-8'?>");<br /> responseString.Append("<?xfa generator='AdobeLiveCycleDesigner_V8.0' APIVersion='2.5.6290.0'?>");<br /> responseString.Append("<xdp:xdp xmlns:xdp='http://ns.adobe.com/xdp/'>");<br /> responseString.Append("<xfa:datasets xmlns:xfa='http://www.xfa.org/schema/xfa-data/1.0/'>");<br /> responseString.Append("<xfa:data>");<br /><br /> responseString.Append("<form1>");<br /> responseString.Append("<TextField1>Homer</TextField1>");<br /> responseString.Append("<TextField2>Simpson</TextField2>");<br /> responseString.Append("<field name ='DropDownList1'>");<br /> responseString.Append("<items save='1'>");<br /> responseString.Append("<text>1</text>");<br /> responseString.Append("<text>2</text>");<br /> responseString.Append("<text>3</text>");<br /> responseString.Append("</items>");<br /> responseString.Append("</field>");<br /><br /> responseString.Append("</form1>");<br /><br /> responseString.Append("</xfa:data>");<br /> responseString.Append("</xfa:datasets>");<br /> responseString.Append("<pdf href='C:\\Test.pdf' xmlns='http://ns.adobe.com/xdp/pdf/' />");<br /> responseString.Append("</xdp:xdp>");<br /><br /> Response.Write(responseString);<br /> Response.Flush();<br /> Response.End();<br /> }<br />}
Maybe you are looking for
-
Error when submitting Time card by Self Service Time responsibility
"Online retrieval of absences for Mr. Atul Agarwal has failed. Please Contact your System Administrator. " When trying to submit a Time Card I am getting the above error. Can someone pls help???
-
Under reset subscriber services on the iPad, how do I learn the passcode when I never set one?
-
Translations,folders and text modules in smartforms
Hi Everyone, Please help me to learn : 1. Translations into different languages in smartforms 2. Creating folders in smartforms 3. Creating and the usage of text modules. 4. More information about page navigations in smartforms. Helpful links and re
-
Determine if JRE version is compliant through Batch Script
I am deploying multiple programs to remote systems. Some of the programs require JRE 1.41 or later to run. I would like to create a bat script to not only identify the JRE version, but identify if the client has a newer version of JRE. So far I have
-
How to completely hide the Project Bin in PSE 6?
Is there any way to completely hide the Project Bin in Photoshop Elements 6 for Mac? I don't need it, and it's hogging screen real estate. I've seen posts that say it can be hidden using the Window menu in PSE 10, but that doesn't work in PSE 6. Than